Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Raman spectra and electron-phonon coupling in disordered graphene with gate-tunable doping

We report a Raman spectroscopy study of graphene field-effect transistors with a controlled amount of defects introduced in graphene by exposure to electron-beam irradiation. Raman spectra are taken at T = 8 K over a range of back gate voltages (V{sub g}) for various irradiation dosages (R{sub e}). We study effects in the Raman spectra due to V{sub g}-induced doping and artificially created disorder at various R{sub e}. With moderate disorder (irradiation), the Raman G peak with respect to the graphene carrier density (n{sub FE}) exhibits a minimum in peak frequency and a maximum in peak width near the charge-neutral point (CNP). These trends are similar to those seen in previous works on pristine graphene and have been attributed to a reduction of electron-phonon coupling strength (D) and removal of the Kohn anomaly as the Fermi level moves away from the CNP. We also observe a maximum in I{sub 2D}/I{sub G} and weak maximum in I{sub D}/I{sub G} near the CNP. All the observed dependences of Raman parameters on n{sub FE} weaken at stronger disorder (higher R{sub e}), implying that disorder causes a reduction of D as well. Our findings are valuable for understanding Raman spectra and electron-phonon physics in doped and disordered graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of Variable Facesheet Liner Configurations for Broadband Noise Reduction

This paper investigates the broadband noise reduction properties of a distributed (variable) facesheet liner. Candidate uniform samples are selected using the Wave Propagation Model and Two-Parameter Model developed at the NASA Langley Research Center. Three uniform and one distributed facesheet samples are tested in the Normal Incidence Tube (NIT) at NASA Langley. Initial results show that the distributed facesheet sample possesses broadband noise reduction properties. Acoustic impedances educed from these NIT tests are used as inputs into the Convected Helmholtz Equation (CHE) propagation code developed at NASA Langley to synthesize the acoustic pressure field in the Grazing Flow Impedance Tube (GFIT) with no flow. Three uniform, one distributed, as well as one three-zone liner, oriented in two different directions, are investigated. Preliminary results showed the distributed facesheet and three-zone liners exhibit broadband noise reduction properties.

M C Brown↗

Field Sensitivity Analysis of Turbulence Model Parameters for Flow Over a Wing

Reynolds-averaged-Navier-Stokes (RANS) turbulence models are a critical tool in computational-fluid-dynamics simulations of aerodynamic systems, but simulation results can be highly sensitive to RANS-model parameter choices. Sensitivity analysis can be used to quantify these impacts, and the objective of this study is to demonstrate field sensitivity analysis with respect to ten parameters in the 2003 Menter shear-stress-transport (SST) turbulence model. Here, the analysis is demonstrated for an application relevant to wind energy, namely, flow over a NACA 0015 wing at 12 degree angle of attack and a Reynolds number of 1.5 x 10 6 . We quantify sensitivity using Sobol indices and the mean-squared gradient, which are estimated using polynomial chaos and active subspace models, respectively. Our results indicate that there are substantial spatial variations in parameter sensitivities, with different sets of most-sensitive parameters near the wing, as well as in the downstream wake, consistent with the physical interpretations of the turbulence model inputs. We show that, for this particular turbulence model and flow, simultaneous dimension reduction is possible across all quantities of interest, enabling efficient exploration of model outcomes. Ultimately, this analysis provides new insights into turbulence model parameter sensitivities in incompressible flows, and also demonstrates the implementation of field sensitivity analysis for applications relevant to aerodynamics simulations.

17 WIND ENERGY↗

Substitutions into the trigonal bipyramidal site of InGaCuO{sub 4}

Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized to understand the influence of the trigonal bipyramidal (TBP) crystallographic M{sup 3+}/Cu{sup 2+} site of the YbFe{sub 2}O{sub 4}-type structure through powder X-ray and neutron diffraction, dielectric and magnetism measurements. The addition of Mg{sup 2+} in the InGaCuO{sub 4} lattice results in a decrease of the dielectric constant, but the dielectric loss is not affected until the concentration of Mg{sup 2+} is above x=0.50. The shift in the diffraction peaks, and subsequently the change in the lattice parameters, cannot be exclusively explained by the change in ionic radii. These results show the first observation of the reduction in axial bond lengths for TBP Cu{sup 2+} in a YbFe{sub 2}O{sub 4}-type crystal lattice. - Graphical abstract: Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized and analyzed with powder X-ray and neutron diffraction, dielectric and magnetism measurements. A shift in the lattice parameters that cannot be explained by the change in ionic radii is addressed through a study of the trigonal bipyramidal site. Highlights: Black-Right-Pointing-Pointer Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized. Black-Right-Pointing-Pointer The observed dielectric properties decreased with the dilution of Cu{sup 2+}. Black-Right-Pointing-Pointer Antiferromagnetic interactions, without ordering, were observed in InGaCu{sub 1-x}Mg{sub x}O{sub 4}. Black-Right-Pointing-Pointer A reduction in the axial TBP bond lengths produced a large change in the c/a ratio. Black-Right-Pointing-Pointer Orbital overlap across the TBP layers greatly affected the observed properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Realization of an Extreme-Parameter Omnidirectional Cloak

An ideal transformation-based omnidirectional cloak always relies on metamaterials with extreme parameters, which were previously thought to be too difficult to realize. For such a reason, in previous experimental proposals of invisibility cloaks, the extreme parameters requirements are usually abandoned, leading to inherent scattering. Here, we report on the first experimental demonstration of an omnidirectional cloak that satisfies the extreme parameters requirement, which can hide objects in a homogenous background. Instead of using resonant metamaterials that usually involve unavoidable absorptive loss, the extreme parameters are achieved using a nonresonant metamaterial comprising arrays of subwavelength metallic channels manufactured with 3D metal printing technology. A high level transmission of electromagnetic wave propagating through the present omnidirectional cloak, as well as significant reduction of scattering field, is demonstrated both numerically and experimentally. Our work may also inspire experimental realizations of the other full-parameter omnidirectional optical devices such as concentrator, rotators, and optical illusion apparatuses.

42 ENGINEERING↗

Use of Covariances in a Consistent Data Assimilation for Improvement of Basic Nuclear Parameters in Nuclear Reactor Applications: From Meters to Femtometers

Recognition of the key role physics plays in innovative reactor design was already made clear by E. Wigner in his warning: “It has been a bit forgotten that in all really creative thinking in reactor design, a working knowledge of nuclear reaction theory is required.” More recently, extensive sensitivity and uncertainty studies and the availability of new covariance data have allowed preliminary quantification of the impact of current nuclear data uncertainties on the design parameters of the Generation-IV systems (both fast neutron and thermal neutron systems). Similar quantifications can be done for the parameters that characterize the associated innovative fuel cycle to insure sustainability, waste minimization and drastic reduction of the proliferation risks. In parallel, there has been a growing and very significant trend to develop a new generation of reactor simulation tools that rely more and more on first principles. It is safe to say that the next generation of innovative nuclear systems will be assessed with a completely new set of tools, more science based, in sharp contrast with what has been done in the past. However, the studies mentioned above point out that the present uncertainties in nuclear data should be significantly reduced in order to fully benefit from advances in modeling and simulation. Only a parallel effort in advanced simulation and nuclear data improvement will be able to provide designers with more general and well validated calculational tools to meet new design target accuracies. One further consideration related to the development of new advanced simulation tools is that there should be a more explicit link with the more fundamental physics parameters underlying the models used to describe cross sections that would avoid the use of processed, application-oriented, data (like multigroup cross sections). Finally, current methodologies for reducing uncertainties coming from nuclear data, which rely on the use of integral experiment information to perform statistical multigroup (i.e., energy spectrum weighted) cross section data assimilation should evolve to embrace new frontiers in advanced simulation. One of the drawbacks of the classical methodologies is related to the energy group structure and the type of neutron energy spectrum that are adopted in the assimilation (adjustment). In fact, after such an adjustment is performed, neutronic designers are then tied to this energy group structure and neutron energy spectrum when carrying out further calculations. In reality, this can be quite a limiting factor in view of the complex spectral issues that are involved in most reactor physics. This work combines novel, but proven, methodologies for overcoming these limitations. In fact, this is the first attempt to build up a link between the wealth of precise integral experiments and a basic theory of nuclear reactions. Essential ingredients of such a procedure, denominated here as assimilation, are covariances for model parameters and sensitivity matrices. The latter provide direct link between reaction theory and integral experiments. The result is a consistent data assimilation performed directly on the basic nuclear physics parameters that are being used in a variety of nuclear reaction mechanisms. The resulting improvement in their performance will consequently reduce related uncertainties when employed in reactor calculations. By using integral reactor physics experiments (meter scale), information is propagated back to the nuclear physics level (femtometers) covering a range of more than 13 orders of magnitude. The assimilation procedure should result in more accurate and more reliable evaluated data files of universal validity rather than tailored to a particular application. In fact, after data assimilation is carried out, the basic nuclear data file can be processed by a dedicated code into any energy group structure that the reactor physicist deems to be useful. On the other hand, integral experiments used in the assimilation should provide additional, possibly quite strict, constraints on the parameters entering nuclear reaction modeling, as well as the reaction models themselves. This report describes three years of combined research by Brookhaben National Lab (BNL) and Idaho National Lab (INL) on establishing viable assimilation methodology. The emphasis of this paper is on the empire code calculations to prepare the priors, sensitivity matrices and covariances for the model parameters. For completeness, we also include a short summary of the assimilation results produced by INL and reported earlier in annual reports [6], [7], [8].

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High-current-density electrosynthesis of formate from captured CO 2 solution by MOF-derived bismuth nanosheets

Greenhouse gas emissions present a significant challenge to humanity, and utilizing renewable electricity to convert emitted CO 2 into value-added products offers a promising solution; however, traditional CO 2 capture and regeneration processes remain energy-intensive, restricting the overall system efficiency and decarbonization efficacy. In this study, an advanced direct reduction of captured CO 2 with large current densities for formate electrosynthesis was demonstrated without the need for CO 2 regeneration or compression. The bismuth nanosheet (DRM-BiNS) was synthesized by direct reduction of a Bi-based MOF, representing a new class of catalytic materials with a large surface area and interconnected pores, suitable for the direct reduction of captured CO 2 . By seamlessly combining experimentation and simulation, insights into the structure-parameter-performance relation were acquired in a flow cell setting, including critical membrane-electrode distance, cell orientation, and pumping flow rate. Important flow-cell components, such as catholyte volume, electrode substrate, membrane choice, and ionomer type, were also carefully examined to enhance the cell performance. In sharp contrast to prior studies limited to current densities below 20 mA/cm 2 in bicarbonate-based captured CO 2 solutions, this work demonstrates a remarkable current density of 300 mA/cm 2 with an FE to formate comparable to the case with gas-fed CO 2 reduction. Moreover, the process sustained an FE above 50% at a high current density of 500 mA/cm 2 . The DRM-BiNS catalyst exhibited outstanding selectivity, activity, and stability, significantly outperforming oxide-derived bismuth nanosheets (OD-BiNS) in captured CO 2 reduction. Furthermore, these findings offer critical insights into the development of sustainable and scalable CO 2 utilization technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Adaptive control and noise suppression by a variable-gain gradient algorithm

An adaptive control system based on normalized LMS filters is investigated. The finite impulse response of the nonparametric controller is adaptively estimated using a given reference model. Specifically, the following issues are addressed: The stability of the closed loop system is analyzed and heuristically established. Next, the adaptation process is studied for piecewise constant plant parameters. It is shown that by introducing a variable-gain in the gradient algorithm, a substantial reduction in the LMS adaptation rate can be achieved. Finally, process noise at the plant output generally causes a biased estimate of the controller. By introducing a noise suppression scheme, this bias can be substantially reduced and the response of the adapted system becomes very close to that of the reference model. Extensive computer simulations validate these and demonstrate assertions that the system can rapidly adapt to random jumps in plant parameters.

Merhav, S. J.↗

An Algorithm for Efficient Maximum Likelihood Estimation and Confidence Interval Determination in Nonlinear Estimation Problems

An algorithm for maximum likelihood (ML) estimation is developed with an efficient method for approximating the sensitivities. The algorithm was developed for airplane parameter estimation problems but is well suited for most nonlinear, multivariable, dynamic systems. The ML algorithm relies on a new optimization method referred to as a modified Newton-Raphson with estimated sensitivities (MNRES). MNRES determines sensitivities by using slope information from local surface approximations of each output variable in parameter space. The fitted surface allows sensitivity information to be updated at each iteration with a significant reduction in computational effort. MNRES determines the sensitivities with less computational effort than using either a finite-difference method or integrating the analytically determined sensitivity equations. MNRES eliminates the need to derive sensitivity equations for each new model, thus eliminating algorithm reformulation with each new model and providing flexibility to use model equations in any format that is convenient. A random search technique for determining the confidence limits of ML parameter estimates is applied to nonlinear estimation problems for airplanes. The confidence intervals obtained by the search are compared with Cramer-Rao (CR) bounds at the same confidence level. It is observed that the degree of nonlinearity in the estimation problem is an important factor in the relationship between CR bounds and the error bounds determined by the search technique. The CR bounds were found to be close to the bounds determined by the search when the degree of nonlinearity was small. Beale's measure of nonlinearity is developed in this study for airplane identification problems; it is used to empirically correct confidence levels for the parameter confidence limits. The primary utility of the measure, however, was found to be in predicting the degree of agreement between Cramer-Rao bounds and search estimates.

Murphy, Patrick Charles↗

Structural changes and self-activated photoluminescence in reductively annealed Sr{sub 3}AlO{sub 4}F

White light emission of self-activated photoluminescence (PL) in Sr{sub 3}AlO{sub 4}F under 254 nm light is only observed after annealing in a reducing atmosphere of 5%H{sub 2}/95%Ar. High-resolution neutron powder diffraction reveals that the FSr{sub 6} octahedrons and AlO{sub 4} tetrahedrons in this anti-perovskite structure are closer packed in reduced than in air-annealed samples which show no PL. Careful analysis of temperature-dependent neutron powder diffraction data establishes smaller isotropic displacement parameters for Sr(1) and O in Sr{sub 3}AlO{sub 4}F annealed in a reducing atmosphere indicating that the denser packing of the polyhedral sub-units leads to a slightly deeper potential for the Sr(1) and O atoms. Both the air- and reductively-annealed samples have identical thermal expansion within the temperature range between 3 and 350 K. The Debye temperatures were calculated using the atomic displacement parameters and show no significant differences between the air and reductively annealed samples making the Debye temperature a bad proxy for self-activated PL. - Graphical abstract: Annealing Sr{sub 3}AlO{sub 4}F under reducing conditions results in an intense self-activated photoluminescence which is correlated with a denser packing of FSr{sub 6} and AlO{sub 4} polyhedra. - Highlights: • Sr{sub 3}AlO{sub 4}F made in air does not show self-activated photoluminescence. • Only when annealing Sr{sub 3}AlO{sub 4}F in a reducing gas is photoluminescence observed. • FSr{sub 6} and AlO{sub 4} polyhedra in reduced Sr{sub 3}AlO{sub 4}F structure are packed more efficient. • Smaller displacement parameters are found for under-bonded Sr(1) and O sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid data-driven model reduction of nonlinear dynamical systems including chemical reaction networks using ℓ 1 -regularization

We develop a new data-driven paradigm for efficient model reduction of a broad class of nonlinear dynamical systems. Our model reduction method directly enables the interpretation of key components of the dynamical system, unlike traditional projection-based model reduction methods that focus on reducing computational complexity more than interpretability. Our method is not application specific and is simple to implement on nonlinear dynamical systems arising from a variety of different fields. It requires minimal parameterization using a single parameter to trade-off between model complexity and estimation error. We use a data-driven paradigm to formulate model reduction as an efficient convex optimization problem that scales polynomially in the original size of the complex system, enabling systems with as many as thousands of components to be reduced in a matter of minutes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Results on Coupling Fast Waves to High Performance Plasmas on DIII-D

Fast Waves (FWs) at 60 MHz and 90 MHz are used in DIII-D for central electron heating and current drive. Coupling of FWs to high-performance discharges is limited by low antenna loading in these regimes. To extend the application of high-power FWs to such regimes, methods of increasing the antenna loading in these regimes are needed. A systematic study of loading enhancement techniques has been carried out in DIII-D, including reduction of the antenna/plasma distance, gas puffing into the far scrape-off layer (SOL), and control of other parameters that affect the particle balance in the far SOL. Quantitative understanding of the physics of the loading resistance and its dependence on edge density profiles is demonstrated. The core FW heating efficiency appeared to be {approx}100% in the Advanced Inductive regime, consistent with the high first-pass direct electron absorption of {approx}75% that is predicted by the ray-tracing code GENRAY in this high electron beta regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cost-optimized Automated Variance Reduction for Highly Angle-dependent Radiation Transport Analyses [Dissertation]

Monte Carlo variance-reduction techniques that directly bias particle direction have historically received limited attention despite being useful for many radiation transport applications such as those in which radiation travels through large regions with a low probability of colliding. One such technique is known as DXTRAN (short for deterministic transport) in the MCNP Monte Carlo radiation transport code. Until now, effectively applying DXTRAN in calculations is largely based on empirical observations of computational performance. Optimal DXTRAN parameters are identified through manual iteration. This work develops new mathematical descriptions of the DXTRAN variance-reduction process and demonstrates a new automated variance-reduction method that applies these mathematical formulations to determine the optimal application of DXTRAN in a given problem.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Geophysical and astronomical models applied in the analysis of very long baseline interferometry

Very long baseline interferometry presents an opportunity to measure at the centimeter level such geodetic parameters as baseline length and instantaneous pole position. In order to achieve such precision, the geophysical and astronomical models used in data analysis must be as accurate as possible. The Mark-3 interactive data analysis system includes a number of refinements beyond conventional practice in modeling precession, nutation, diurnal polar motion, UT1, solid Earth tides, relativistic light deflection, and reduction to solar system barycentric coordinates. The algorithms and their effects on the recovered geodetic, geophysical, and astrometric parameters are discussed.

Ma, C.↗

Real-Time Drag Optimization of Aspect Ratio 13.5 Common Research Model with Distributed Flap System

This paper presents a real-time drag optimization study of the aspect ratio 13.5 Common Research Model (CRM) with a distributed mini-plain flap system. A surrogate aerodynamic model of the aspect ratio 13.5 CRM is developed based on an aerodynamic database computed by a transonic panel method to capture the aerodynamic coefficients as functions of the angle of attack, flap deflections, and Mach number. A recursive least-squares parameter estimation algorithm is designed to estimate the aerodynamic parameters of the surrogate model. The estimated surrogate model is then used in an on-line drag optimization strategy based on an adjoint method. The results of the real-time drag optimization indicate a drag reduction of 2.46% for Mach 0.80, 3.37% for Mach 0.85, and 1.95% for Mach 0.88. The results show the convergence of all parameter estimates.

Drag Optimization↗

Emittance and lifetime measurement with damping wigglers

National Synchrotron Light Source II (NSLS-II) is a new third-generation storage ring light source at Brookhaven National Laboratory. The storage ring design calls for small horizontal emittance (<1 nm-rad) and diffraction-limited vertical emittance at 12 keV (8 pm-rad). Achieving low value of the beam size will enable novel user experiments with nm-range spatial and meV-energy resolution. The high-brightness NSLS-II lattice has been realized by implementing 30-cell double bend achromatic cells producing the horizontal emittance of 2 nm rad and then halving it further by using several Damping Wigglers (DWs). This paper is focused on characterization of the DW effects in the storage ring performance, namely, on reduction of the beam emittance, and corresponding changes in the energy spread and beam lifetime. The relevant beam parameters have been measured by the X-ray pinhole camera, beam position monitors, beam filling pattern monitor, and current transformers. In this paper, we compare the measured results of the beam performance with analytic estimates for the complement of the 3 DWs installed at the NSLS-II.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Application of an Evolutionary Algorithm to the Optimization of a Mesoscale Meteorological Model

It is demonstrated that a simple evolutionary algorithm can optimize a set of mesoscale atmospheric model parameters with respect to agreement between the mesoscale simulation and a limited set of synthetic observations. This is highlighted using the Regional Atmospheric Modeling System (RAMS). A set of 23 RAMS parameters is optimized by minimizing a cost function based on the root-mean-square (rms) error between the RAMS simulation and synthetic data (observations derived from a separate RAMS simulation). It is found that the optimization can be done with relatively modest computer resources; therefore, operational implementation is possible. The overall number of simulations needed to obtain a specific reduction of the cost function is found to depend strongly on the procedure used to perturb the "child" parameters relative to their "parents" within the evolutionary algorithm. Furthermore, the choice of meteorological variables that are included in the rms error and their relative weighting are also found to be important factors in the optimization.

54 ENVIRONMENTAL SCIENCES↗

Variance reduction in lattice QCD observables via normalizing flows

Normalizing flows can be used to construct unbiased, reduced-variance estimators for lattice field theory observables that are defined by a derivative with respect to action parameters. This work implements the approach for observables involving gluonic operator insertions in the SU(3) Yang-Mills theory and two-flavor QCD in four space-time dimensions. Variance reduction by factors of 10–60 is achieved in glueball correlation functions and in gluonic matrix elements related to hadron structure, with demonstrated computational advantages. The observed variance reduction is found to be approximately independent of the lattice volume, so volume transfer can be utilized to minimize training costs.

Abbott, Ryan [Columbia U.; MIT, Cambridge, CTP; IA↗