Search NASA⌕ Search

SEARCH · Search NASA

Results for “pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Metal patterning using maskless vacuum evaporation process based on selective deposition of photochromic diarylethene

We developed an electrode/wiring patterning method that does not employ evaporation shadow masks; this method is based on selective metal deposition of photochromic diarylethene (DAE). In the selective Mg deposition based on the photoisomerization of DAE, Mg vapor atoms are deposited only on colored DAE film obtained upon UV irradiation, but not on uncolored film. We demonstrated fine metal Mg patterning with a minimum width of 3 {mu}m and the preparation of a patterned cathode. The selective metal deposition method has significant potential for preparing fine electrodes/wiring for various organic electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Moduli stabilization and the pattern of sparticle spectra

We discuss the pattern of low energy sparticle spectra which appears in some class of moduli stabilization scenario. In case that light moduli are stabilized by non-perturbative effects encoded in the superpotential and a phenomenologically viable de Sitter vacuum is obtained by a sequestered supersymmetry breaking sector, the anomaly-mediated soft terms become comparable to the moduli-mediated ones, leading to a quite distinctive pattern of low energy spacticle masses dubbed the mirage mediation pattern. We also discuss low energy sparticle masses in more general mixed-mediation scenario which includes a comparable size of gauge mediation in addition to the moduli and anomaly mediations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Vacuum-ultraviolet-induced charge depletion in plasma-charged patterned-dielectric wafers

Plasma-induced charging of patterned-dielectric structures during device fabrication can cause structural and electrical damage to devices. In this work, we report on vacuum-ultraviolet (VUV) radiation-induced charge depletion in plasma-charged patterned-silicon-oxide dielectric wafers. Charge depletion is studied as a function of photon energy and the aspect ratio of hole structures. The wafers were charged in a plasma and subsequently exposed to monochromatic-synchrotron-VUV. Surface-potential measurements after VUV exposure showed that photon energies less than 11 eV were beneficial in depleting the plasma-induced charge from the patterned-dielectric wafers. In addition, for a given photon-flux density and for photon energies less than 11 eV, VUV-induced charge depletion decreases with increasing hole aspect ratio. The results are explained with a physically plausible equivalent-circuit model, which suggests that both electron photoinjection from Si into the oxide and oxide surface conductivity play an important role in the charge-depletion process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Patterned Exfoliation of GaAs Based on Masked Helium Implantation and Subsequent Rapid Thermal Annealing

A method of patterning single crystal GaAs based on ion implantation induced selective area exfoliation is suggested. Samples were implanted with 200-500 keV helium ions to a fluence range of 2-4x10{sup 16} He{sup +}/cm{sup 2} at room temperature through masks of Ni mesh (40 {mu}m opening) or stainless steel wire (50 {mu}m in diameter), and subsequent rapid thermal annealing at 350-500{open_square} resulted in expulsion of ion beam exposed material. The influences of ion energy, ion fluence, implantation temperature, subsequent annealing conditions (temperature and ramp rate), and mask pattern and its orientation with GaAs lattice on the patterned exfoliation were examined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A SIMPLE HETERODYNE TEMPORAL SPECKLE-PATTERN INTERFEROMETER

A common light path design of heterodyne speckle pattern interferometer based on temporal speckle pattern interferometry is proposed for non-contact, full-field and real-time continuous displacement measurement. Double frequency laser is produced by rotating a half wave plate. An experiment was carried out to measure the dynamic displacement of a cantilever plate for testing the proposed common path heterodyne speckle pattern interferometer. The accuracy of displacement measurement was checked by measuring the motion at the mid-point of the plate with a point displacement sensor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Concentric-roll pattern in a dielectric barrier discharge in air

Concentric-roll pattern in a dielectric barrier discharge in air at pd value 29.3 hPa cm is observed in the presence of circular boundary and studied by an optical method for the first time. The weak correlation between microdischarges in concentric-roll patterns indicates that the concentric roll is a spatiotemporal chaos although the space integral of microdischarges is quasiperiodic in time. Spatiotemporal measurements of microdischarges suggest that the effective electric field near the boundary is weaker than that in the interior region. The bifurcation of concentric-roll patterns with the increase of voltage and selection of characteristic wavelength are also studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrodeposited Silver Nanoparticles Patterned Hexagonally for SERS

We have fabricated hexagonally patterned silver nanoparticles for surface-enhanced Raman scattering (SERS) by electrodepositing silver on the surface of an aluminum plate prepared by completely removing the oxide from anodic aluminum oxide (AAO) templates. Even after completely removing the oxide, well-ordered hexagonal patterns, similar to the shape of graphene, remained on the surface of the aluminum plate. The borders of the hexagonal pattern protruded up to form sorts of nano-mountains at both the sides and apexes of the hexagon, with the apexes protruding even more significantly than the sides. The aluminum plate prepared by completely removing the oxide has been used in the preparation of SERS substrates by sputter-coating of gold or silver on it. Instead of sputter-coating, here we have electro-deposited silver on the aluminum plate. When silver was electro-deposited on the plate, silver nanoparticles were made along the hexagonal margins.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Pattern formation and propagation during microwave breakdown

During microwave breakdown at atmospheric pressure, a sharp plasma front forms and propagates toward the microwave source at high velocities. Experiments show that the plasma front may exhibit a complex dynamical structure or pattern composed of plasma filaments aligned with the wave electric field and apparently moving toward the source. In this paper, we present a model of the pattern formation and propagation under conditions close to recent experiments. Maxwell's equations are solved together with plasma fluid equations in two dimensions to describe the space and time evolution of the wave field and plasma density. The simulation results are in excellent agreement with the experimental observations. The model provides a physical interpretation of the pattern formation and dynamics in terms of ionization-diffusion and absorption-reflection mechanisms. The simulations allow a good qualitative and quantitative understanding of different features such as plasma front velocity, spacing between filaments, maximum plasma density in the filaments, and influence of the discharge parameters on the development of well-defined filamentary plasma arrays or more diffuse plasma fronts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

L1{sub 0} FePt(111)/glassy CoFeTaB bilayered structure for patterned media

We report on the use of CoFeTaB metallic glass thin film as a soft magnetic underlayer which promotes the growth of L1{sub 0} FePt along the preferred (111) crystallographic direction. The preferred oriented phase of L1{sub 0} FePt is obtained by either in situ deposition upon a heated CoFeTaB/SiO{sub 2}/Si or at room temperature (FePt/CoFeTaB/SiO{sub 2}/Si) followed by annealing at 400-450 deg. C for 15 min. The latter process is shown to be advantageous in terms of the fabrication of patterned media. Pattern sizes ranging from 25-100 nm made from L1{sub 0} FePt (111)/glassy CoFeTaB were fabricated by photo/electron beam lithography. The structural and magnetic characterizations strongly suggest the applicability of the present bilayered structure in the fabrication of high density bit-patterned magnetic recording media.

36 MATERIALS SCIENCE↗

Hexagonal superlattice pattern consisting of colliding filament pairs in a dielectric barrier discharge

Colliding-pairs hexagonal superlattice pattern (CPHSP) is studied in a dielectric barrier discharge system. The evolution of CPHSP bifurcating from a hexagonal pattern to chaos is shown. The phase diagrams of CPHSP as a function of discharge parameters are given. From a series of pictures taken by a high speed video camera, collisions between two spots are observed and the superposition of many collisions results in each big spot presenting four small spots on long time scales. Measurements of the correlation between filaments indicate that the pattern is an interleaving of four different transient hexagonal sublattices. Depending on the discharging sequence, the forces exerted on one colliding spot are discussed briefly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanohole pattern formation on germanium induced by focused ion beam and broad beam Ga{sup +} irradiation

Hexagonally ordered nanohole patterns were produced on Ge(100) surfaces by focused Ga{sup +} ion beam and broad Ga{sup +} ion beam irradiations with 5 keV energy under normal incidence. Identical patterns were obtained by irradiations with a scanning focused ion beam under different irradiation conditions and with a broad Ga{sup +} beam without scanning and five orders of magnitude smaller ion flux. Thus, we could demonstrate that nanohole pattern formation is independent of ion flux over several orders of magnitude and scanning of a focused ion beam under appropriate conditions is identical to broad ion beam irradiation.

36 MATERIALS SCIENCE↗

Phase emerging from intramonolayer cycloaddition on micro-patterned monolayer

Cu(I)-catalyzed cycloaddition between azide and acetylene, followed by hydrolysis of ester were performed on micro-patterned self-assembled monolayer to produce smaller features. The reactions were initially performed on mixed monolayers and analysed by water contact angle (CA) and confirmed by X-ray Photoelectron Spectroscopy (XPS). The contact angle measurement has shown a drastic wetting of water on the surface of mixed monolayer indicating that the terminal groups on mixed monolayer has changed into carboxylic acid and hydroxyl terminals. The reactions work in a similar way on micro-patterned SAM and analyzed by using friction force microscope. The emerging of the new lines with high friction force on the border suggested a successful intramonolayer reactions on the border of the patterned SAM.

36 MATERIALS SCIENCE↗

Nexus between directionality of terahertz waves and structural parameters in groove patterned InAs

We performed terahertz (THz) time-domain spectroscopy in various geometries, for characterizing the directivity of THz waves emitted from groove patterned InAs structures. We first identified two transient transport processes as underlying THz emission mechanisms in InAs epilayers with different thicknesses. Carrier drift around the surface depletion region was predominant for the THz wave generation in the thin sample group (10-70 nm), whereas electronic diffusion overrode the drift currents in the thick sample group (370-900 nm) as revealed by the amplitude change and phase reversal. Through a combination of electron-beam lithography and inductively coupled plasma etching in 1 {mu}m-thick InAs epilayers, we could further periodically fabricate either asymmetric V-groove patterns or symmetric parabolic apertures. The THz amplitude was enhanced, particularly along the line-of-sight transmissive direction when the periodic groove patterns act as microscale reflective mirrors separated by a scale of the diffusion length.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An approach to tune the amplitude of surface ripple patterns

An approach is presented to tune the amplitude of ripple patterns using ion beam. By varying the depth location of amorphous/crystalline interface, ripple patterns of different amplitude with similar wavelength were grown on the surface of Si (100) using 50 keV Ar{sup +} beam irradiation. Atomic force microscopy study demonstrates the tuning of amplitude of ripples patterns for wide range. Rutherford backscattering channeling measurement was performed to measure the depth location of amorphous/crystalline interface. It is postulated that the ion beam stimulated solid flow inside the amorphous layer controls the wavelength, whereas mass rearrangement at amorphous/crystalline interface controls the amplitude.

36 MATERIALS SCIENCE↗

The role of carbon in ion beam nano-patterning of silicon

We report a comparative study of nano-pattern formations on a carbon film and a smooth Si(100) surface following inert and chemically active ion bombardment. For the case of carbon film, patterns could be formed both by inert (Ar{sup +}) and self (C{sup +}) ion bombardment with the former producing ripples at relatively lower fluence. In contrast, bombardment by inert Ar{sup +} failed to form the nano patterns on Si surface, while bombardment by the same energy C{sup +} generated the ripples. Thus, impurity induced chemical effect seems to be crucial rather than the Bradley-Harper or Carter-Vishnyakov effects for destabilizing the surface for ripple formation.

36 MATERIALS SCIENCE↗

Active patterning and asymmetric transport in a model actomyosin network

Cytoskeletal networks, which are essentially motor-filament assemblies, play a major role in many developmental processes involving structural remodeling and shape changes. These are achieved by nonequilibrium self-organization processes that generate functional patterns and drive intracellular transport. We construct a minimal physical model that incorporates the coupling between nonlinear elastic responses of individual filaments and force-dependent motor action. By performing stochastic simulations we show that the interplay of motor processes, described as driving anti-correlated motion of the network vertices, and the network connectivity, which determines the percolation character of the structure, can indeed capture the dynamical and structural cooperativity which gives rise to diverse patterns observed experimentally. The buckling instability of individual filaments is found to play a key role in localizing collapse events due to local force imbalance. Motor-driven buckling-induced node aggregation provides a dynamic mechanism that stabilizes the two-dimensional patterns below the apparent static percolation limit. Coordinated motor action is also shown to suppress random thermal noise on large time scales, the two-dimensional configuration that the system starts with thus remaining planar during the structural development. By carrying out similar simulations on a three-dimensional anchored network, we find that the myosin-driven isotropic contraction of a well-connected actin network, when combined with mechanical anchoring that confers directionality to the collective motion, may represent a novel mechanism of intracellular transport, as revealed by chromosome translocation in the starfish oocyte.

36 MATERIALS SCIENCE↗

Heat assisted magnetic recording with patterned FePt recording media using a lollipop near field transducer

In heat-assisted magnetic recording, optical energy is transferred to a small optical spot on the recording media using a near field transducer. In this study, a scattered field finite difference time domain simulation is used to analyze the performance of a lollipop transducer in heat assisted magnetic recording on both a patterned FePt media and a continuous thin film. To represent wear, sharp corners of the peg are approximated with curved ones, which are found to narrow the track width without excessive loss of intensity. Compared with continuous media, the patterned media exhibits higher energy efficiency and a better concentrated optical beam spot. This effect is due to the near field effects of patterned media on the performance of the transducer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of hydrogen patterning gas on electric and magnetic properties of perpendicular magnetic tunnel junctions

To identify the degradation mechanism in magnetic tunnel junctions (MTJs) using hydrogen, the properties of the MTJs were measured by applying an additional hydrogen etch process and a hydrogen plasma process to the patterned MTJs. In these studies, an additional 50 s hydrogen etch process caused the magnetoresistance (MR) to decrease from 103% to 14.7% and the resistance (R) to increase from 6.5 kΩ to 39 kΩ. Moreover, an additional 500 s hydrogen plasma process decreased the MR from 103% to 74% and increased R from 6.5 kΩ to 13.9 kΩ. These results show that MTJs can be damaged by the hydrogen plasma process as well as by the hydrogen etch process, as the atomic bonds in MgO may break and react with the exposed hydrogen gas. Compounds such as MgO hydrate very easily. We also calculated the damaged layer width (DLW) of the patterned MTJs after the hydrogen etching and plasma processes, to evaluate the downscaling limitations of spin-transfer-torque magnetic random-access memory (STT-MRAM) devices. With these calculations, the maximum DLWs at each side of the MTJ, generated by the etching and plasma processes, were 23.8 nm and 12.8 nm, respectively. This result validates that the hydrogen-based MTJ patterning processes cannot be used exclusively in STT-MRAMs beyond 20 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗