Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Chemistry of K in Cu(In,Ga)Se 2 photovoltaic absorbers: Effects of temperature on Cu-K-In-Se films

Incorporation of K has led to world record Cu(In,Ga)Se 2 photovoltaic power conversion efficiencies, but there is poor consensus about the role of phase impurities in these advances. This work lays a foundation for identifying and controlling these phase impurities. Films of Cu-K-In-Se were co-evaporated at varied K/(K + Cu) compositions and substrate temperatures (with constant (K + Cu)/In ~ 0.85). Increased Na composition on the substrate's surface and decreased growth temperature were both found to favor Cu 1-x K x InSe 2 alloy formation, relative to two-phase CuInSe 2 +KInSe 2 formation. Structures from X-ray diffraction (XRD), band gaps, resistivities, minority carrier lifetimes and carrier concentrations from time-resolved photoluminescence were in agreement with previous reports, where low K/(K + Cu) composition films exhibited properties promising for photovoltaic absorbers. Films grown at 400-500 °C were then annealed to 600 degrees C in a controlled Se ambient, which caused K loss by evaporation in proportion to the initial K/(K + Cu) composition. Similar to growth temperature, annealing drove Cu 1-x K x InSe 2 alloy consumption and CuInSe 2 +KInSe 2 production, as evidenced by high temperature XRD. Annealing also decomposed KInSe 2 and formed K 2 In 12 Se 19 . At high temperature, the KInSe 2 crystal lattice gradually contracted as temperature and time increased, as well as just time. Evaporative loss of K during annealing could accompany the generation of vacancies on K lattice sites, and may explain the KInSe 2 lattice contraction. As a result, this knowledge of Cu-K-In-Se material chemistry may be used to predict and control minor phase impurities in Cu(In,Ga)(Se,S) 2 photovoltaic absorbers - where impurities below typical detection limits may have played a role in recent world record photovoltaic efficiencies that utilized KF post-deposition treatments.

14 SOLAR ENERGY↗

RHIC spin flipper AC dipole controller

The RHIC Spin Flipper's five high-Q AC dipoles which are driven by a swept frequency waveform require precise control of phase and amplitude during the sweep. This control is achieved using FPGA based feedback controllers. Multiple feedback loops are used to and dynamically tune the magnets. The current implementation and results will be presented. Work on a new spin flipper for RHIC (Relativistic Heavy Ion Collider) incorporating multiple dynamically tuned high-Q AC-dipoles has been developed for RHIC spin-physics experiments. A spin flipper is needed to cancel systematic errors by reversing the spin direction of the two colliding beams multiple times during a store. The spin flipper system consists of four DC-dipole magnets (spin rotators) and five AC-dipole magnets. Multiple AC-dipoles are needed to localize the driven coherent betatron oscillation inside the spin flipper. Operationally the AC-dipoles form two swept frequency bumps that minimize the effect of the AC-dipole dipoles outside of the spin flipper. Both AC bumps operate at the same frequency, but are phase shifted from each other. The AC-dipoles therefore require precise control over amplitude and phase making the implementation of the AC-dipole controller the central challenge.

43 PARTICLE ACCELERATORS↗

Metasurface-assisted 3D beam shaping for desired phase, amplitude, and polarization

Cascaded metasurfaces can control the phase, amplitude and polarization of an electromagnetic beam, shaping it in three dimensional configuration not achievable with other methods. Each cascaded metasurface has dielectric or metallic scatterers arranged in a period array. The shape of the scatterers determines the three dimensional configuration of the output beam and is determined with iterative calculations through computational simulations.

Kamali, Seyedeh Mahsa↗

Adaptive Nulling: A New Enabling Technology for Interferometric Exoplanet

Deep, stable nulling of starlight requires careful control of the amplitudes and phases of the beams that are being combined. The detection of earth-like planets using the interferometer architectures currently being considered for the Terrestrial Planet Finder mission require that the E-field amplitudes are balanced at the level of approx. 0.1%, and the phases are controlled at the level of 1 mrad (corresponding to approx.1.5 nm for a wavelength of 10 microns). These conditions must be met simultaneously at all wavelengths across the science band, and for both polarization states, imposing unrealistic tolerances on the symmetry between the optical beamtrains. We introduce the concept of a compensator that is inserted into the beamtrain, which can adaptively correct for the mismatches across the spectrum, enabling deep nulls with realistic, imperfect optics. The design presented uses a deformable mirror to adjust the amplitude and phase of each beam as an arbitrary function of wavelength and polarization. A proof-of-concept experiment will be conducted at visible/near-IR wavelengths, followed by a system operating in the Mid-IR band.

planet detection↗

Axial H-Bonding Solvent Controls Inhomogeneous Spectral Broadening, While Peripheral H-Bonding Solvent Controls Vibronic Broadening: Cresyl Violet in Methanol

The dynamics of the nuclei of both a chromophore and its condensed-phase environment control many spectral features, including the vibronic and inhomogeneous broadening present in spectral line shapes. For the cresyl violet chromophore in methanol, we here analyze and isolate the effect of specific chromophore–solvent interactions on simulated spectral densities, reorganization energies, and linear absorption spectra. Employing both chromophore and its condensed-phase environment control many spectral features, including the vibronic and inhomogeneous broadening present in spectral line shapes. For the cresyl violet chromophore in methanol, we here analyze and isolate the effect of specific chromophore–solvent interactions on simulated spectral densities, reorganization energies, and linear absorption spectra. Employing both force field and ab initio molecular dynamics trajectories along with the inclusion of only certain solvent molecules in the excited-state calculations, we determine that the methanol molecules axial to the chromophore are responsible for the majority of inhomogeneous broadening, with a single methanol molecule that forms an axial hydrogen bond dominating the response. Furthermore, the strong peripheral hydrogen bonds do not contribute to spectral broadening, as they are very stable throughout the dynamics and do not lead to increased energy-gap fluctuations. We also find that treating the strong peripheral hydrogen bonds as molecular mechanical point charges during the molecular dynamics simulation underestimates the vibronic coupling. Including these peripheral hydrogen bonding methanol molecules in the quantum-mechanical region in a geometry optimization increases the vibronic coupling, suggesting that a more advanced treatment of these strongly interacting solvent molecules during the molecular dynamics trajectory may be necessary to capture the full vibronic spectral broadening.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable Direct Adaptive Periodic Control of Nonminimum-Phase Systems

The main contribution of this paper is to put stability requirements for convergence of direct adaptive periodic controllers on equal footing with requirements for indirect adaptive periodic control. The resulting stability conditions are simply that the plant order and delay are known a-priori.

robust↗

Space Station Freedom environmental control and life support system phase 3 simplified integrated test detailed report

A description of the phase 3 simplified integrated test (SIT) conducted at the Marshall Space Flight Center (MSFC) Core Module Integration Facility (CMIF) in 1989 is presented. This was the first test in the phase 3 series integrated environmental control and life support systems (ECLSS) tests. The basic goal of the SIT was to achieve full integration of the baseline air revitalization (AR) subsystems for Space Station Freedom. Included is a description of the SIT configuration, a performance analysis of each subsystem, results from air and water sampling, and a discussion of lessons learned from the test. Also included is a full description of the preprototype ECLSS hardware used in the test.

Roberts, B. C.↗

Carrier phase synchronization system for improved amplitude modulation and television broadcast reception

Systems and methods are described for carrier phase synchronization for improved AM and TV broadcast reception. A method includes synchronizing the phase of a carrier frequency of a broadcast signal with the phase of a remote reference frequency. An apparatus includes a receiver to detect the phase of a reference signal; a phase comparator coupled to the reference signal-phase receiver; a voltage controlled oscillator coupled to the phase comparator; and a phase-controlled radio frequency output coupled to the voltage controlled oscillator.

47 OTHER INSTRUMENTATION↗

Carrier phase synchronization system for improved amplitude modulation and television broadcast reception

Systems and methods are described for carrier phase synchronization for improved AM and TV broadcast reception. A method includes synchronizing the phase of a carrier frequency of a broadcast signal with the phase of a remote reference frequency. An apparatus includes a receiver to detect the phase of a reference signal; a phase comparator coupled to the reference signal-phase receiver; a voltage controlled oscillator coupled to the phase comparator; and a phase-controlled radio frequency output coupled to the voltage controlled oscillator.

47 OTHER INSTRUMENTATION↗

Auxiliary field quantum Monte Carlo for multiband Hubbard models: Controlling the sign and phase problems to capture Hund's physics

In the study of strongly correlated, many-electron systems, the Hubbard-Kanamori (HK) model has emerged as one of the prototypes for transition metal oxide physics. The model is multiband in nature and contains Hund's coupling terms, which have pronounced effects on metal-insulator transitions, high-temperature superconductivity, and other physical properties. In the following, we present a complete theoretical framework for treating the HK model using the ground-state auxiliary field quantum Monte Carlo (AFQMC) method and analyze its performance on few-band models whose parameters approximate those observed in ruthenates, rhodates, and other materials exhibiting Hund's physics. Unlike previous studies, the constrained path and phaseless approximations are used to respectively control the sign and phase problems, which enables high-accuracy modeling of the HK model's ground-state properties within parameter regimes of experimental interest. We demonstrate that, after careful consideration of the Hubbard-Stratonovich transformations and trial wave functions employed, relative errors in the energy of less than 1% can routinely be achieved for moderate to large values of the Hund's coupling constant. Crucially, our methodology also accurately predicts magnetic ordering and phase transitions. Furthermore, the results presented open the door to more predictive modeling of Hund's physics within a wide range of strongly correlated materials using AFQMC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disturbance-free phase-shifting laser diode interferometer using adaptive feedback control

A feedback-control-equipped phase-shifting laser diode interferometer that eliminates external disturbance is proposed. The feedback loop is stabilized by adaptive control of the polarity of the interference signal. Conventional phase-shifting interferometry can be used with the feedback control, resulting in simplified signal processing and accurate measurement. Several experiments confirm the stability of the feedback control with a measurement repeatability of 1.8 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time-resolved, dual heterodyne phase collection transient grating spectroscopy

The application of optical heterodyne detection for transient grating spectroscopy (TGS) using a fixed, binary phase mask often relies on taking the difference between signals captured at multiple heterodyne phases. To date, this has been accomplished by manually controlling the heterodyne phase between measurements with an optical flat. In this letter, an optical configuration is presented which allows for collection of TGS measurements at two heterodyne phases concurrently through the use of two independently phase controlled interrogation paths. This arrangement allows for complete, heterodyne amplified TGS measurements to be made in a manner not constrained by a mechanical actuation time. Measurements are instead constrained only by the desired signal-to-noise ratio. A temporal resolution of between 1 and 10 s, demonstrated here on single crystal metallic samples, will allow TGS experiments to be used as an in-situ, time-resolved monitoring technique for many material processing applications.

36 MATERIALS SCIENCE↗

Elastic Changepoint Detection for Globally-indexed Functional Time Series Data with Climate Applications

Changepoint detection is a vital tool in the application of climate data analysis. Numerous types of climate observation data are most properly represented by functional time series, implying a need for accurate changepoint detection methods applicable to functional time series data. Such data taken at a global scale often contain both spatial heterogeneity and dependence as well as phase (time) misalignment. In this report, we present methods which can detect spatially-dependent changepoints while allowing different estimates of change time and change strength depending on location. Additionally, we provide extensions to this spatially-predicted model which controls for phase variability among observations. Our methods provide the ability to detect a single change, or control for epidemic changes (where a “return-to-normal” change is more likely to be detected than the initial change). We showcase results analyzing the June 1991 eruption of Mt. Pinatubo, where our methods demonstrate the ability to accurately detect both single and epidemic changepoints even in the presence of strong seasonal variability. We find that our spatially-predicted model improves the detection of relevant changepoints versus methods which do not take spatial information into account, and we find that controlling for phase variability helps to control the false discovery rate during the detection process.

54 ENVIRONMENTAL SCIENCES↗

Development of Tunable, Precision Permanent Magnet Phase Shifter for X-Ray FEL

In an X-ray free-electron laser (XFEL), a high quality relativistic electron beam from a linear accelerator traverses an array of undulator magnets to generate a high power X-ray beam by allowing the FEL to reach saturation. In many XFELs, phase shifters haven’t been commonly used or included in their designs. The importance of the phase shifter was recognized only recently. A phase shifter can be constructed using either an electromagnet (EM) or a permanent magnet (PM). EM phase shifters are heavy, complex to operate, and take more valuable longitudinal space between the undulators. Compared to EMs, the PMs have several outstanding advantages, including compactness, lighter weights, simple operation, and low maintenance. This project has developed an innovative design of fixed-gap, tunable PM-based compact phase shifter for the XFEL. While keeping the poles and gap fixed, the new design incorporates proven features from the prior work, along with novel field tuning methods, which allow the field strength to be adjusted within a reasonably large range to achieve the desired range of the phase delay control. The PM design without electric currents and power electronics associated with EMs improves reliability by reducing the number of possible points of failure and lowers the operation cost. The compactness makes it possible to use PM phase shifters in the existing XFELs with small gaps between adjacent undulators, as well as in the new XFELs without significantly increasing the FEL length. In Phase I we have accomplished the followings; 1) determined the optimum physics parameters for both weak and strong phase shifters; 2) conducted magnetic design with concrete magnetic and geometrical parameters of actual produced PM materials; 3) provided solutions to achieve precision fine tuning of the magnetic fields with unique methods; 4) elaborated a design based upon ease of manufacturing and cost analysis; and 5) produced rare-earth PM materials, which will be used for prototyping in Phase II. The phase I results provide a foundation for the research and development in the Phase II project, which will aim at building two full-size PM phase shifters and testing at SLAC National Accelerator Laboratory. This project will significantly provide the potential to bring a paradigm change in accelerator technology, replacing conventional electromagnets for many existing accelerator applications and allowing the development of new applications in completely new areas. For example, the PM FEL phase shifters can help significantly improve coherence and power of an XFEL. The proposed use of PM phase shifters will also bring significant cost savings to the construction, operation and maintenance of FEL facilities.

43 PARTICLE ACCELERATORS↗

Competing Magnetic Interactions and Field-Induced Metamagnetic Transition in Highly Crystalline Phase-Tunable Iron Oxide Nanorods

The inherent existence of multi phases in iron oxide nanostructures highlights the significance of them being investigated deliberately to understand and possibly control the phases. Here, the effects of annealing at 250 °C with a variable duration on the bulk magnetic and structural properties of high aspect ratio biphase iron oxide nanorods with ferrimagnetic Fe3O4 and antiferromagnetic α-Fe2O3 are explored. Increasing annealing time under a free flow of oxygen enhanced the α-Fe2O3 volume fraction and improved the crystallinity of the Fe3O4 phase, identified in changes in the magnetization as a function of annealing time. A critical annealing time of approximately 3 h maximized the presence of both phases, as observed via an enhancement in the magnetization and an interfacial pinning effect. This is attributed to disordered spins separating the magnetically distinct phases which tend to align with the application of a magnetic field at high temperatures. The increased antiferromagnetic phase can be distinguished due to the field-induced metamagnetic transitions observed in structures annealed for more than 3 h and was especially prominent in the 9 h annealed sample. Our controlled study in determining the changes in volume fractions with annealing time will enable precise control over phase tunability in iron oxide nanorods, allowing custom-made phase volume fractions in different applications ranging from spintronics to biomedical applications.

36 MATERIALS SCIENCE↗

High Efficiency, Low Cost RF Sources for Accelerators and Colliders

Calabazas Creek Research, Inc. (CCR) and its collaborators are developing high efficiency, low cost RF sources. Phase and Amplitude Controlled Magnetrons: CCR, Fermilab, and Communications & Power Industries, LLC (CPI) recently developed a 100 kW, 1.3 GHz magnetron system with amplitude and phase control. The system operated at more than 80% efficiency and demonstrated rapid control of amplitude and phase. Multiple Beam Triodes: CCR, in collaboration with CPI and JP Accelerator Works, Inc., is developing 200 kW, pulsed and CW RF sources from 350 to 700 MHz with projected efficiencies exceeding 80% and cost of $0.50/Watt. Prototype tubes are scheduled for tests in spring 2021. High Efficiency Klystrons:CCR, CPI, and Leidos, Inc. are building a 1.3 GHz, 100 kW klystron operating at 80% efficiency. High power testing is scheduled for summer 2021. Multiple Beam IOTs: CCR and Georgia Tech Research Institute are developing MBIOTs with simplified input coupling and high efficiency. Simulations indicate that 3rd harmonic drive power can increase the efficiency 8-10 %. The program is developing a prototype tube to produce 200 kW peak, 100 kW average power at 704 MHz.

43 PARTICLE ACCELERATORS↗