Search NASA⌕ Search

SEARCH · Search NASA

Results for “programming systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

The NASA Ames Closed Environmental Research Chamber: Present Status

The Closed Environmental Research Chamber (CERC) at the NASA Ames Research Center was created to investigate both components and complete systems for life support of advanced space exploration missions. This facility includes a Main Chamber, an Airlock, a Sample Transfer Lock, a Vacuum System, an Air Recompression System, a dedicated control room and a pit area for housing supporting and environmental control systems. The Main Chamber provides 310 sq ft of internal working/living space on two levels. It is planned that the CERC will be a human-rated facility for habitation simulation under mass balance closure conditions. The internal pressure will be variable over the range of 14.7 psia to 5 psia with accompanying capability for variation in atmosphere composition to maintain the oxygen partial pressure at 160 mm Hg. The CERC will be provided with a core set of primary life support subsystems for temperature and humidity control, C02 removal and trace contaminant control. Interfacing with external life support technology test b~ds with be provided, along with connection to centralized, microprocessor-based data acquisition and control systems. This paper will discuss the current status of the CERC facility and show how it is being used to address the advanced technology requirements necessary to implement an integrated working and living environment for a planetary habitat. In particular, it will be shown how the CERC, along with a human-powered centrifuge, a planetary terrain simulator and advanced displays and a virtual reality capability will work together to develop and demonstration applicable technologies for future planetary habitats. Artificial intelligence and expert system programming techniques will be used extensively to provide an automated environment for a 4-person crew. There will be several robotic mechanisms performing exploration tasks external to the habitat that will be controlled through the virtual environment to provide representative workloads for the crew. Finally, there will be a discussion of how effective are innovative new multidisciplinary test facilities to the investigation of the wide range of human and machine problems inherent in exploration missions.

Gross, Anthony R.↗

AVST Morphing Project Research Summaries in Fiscal Year 2001

The Morphing project at the National Aeronautics and Space Agency's Langley Research Center is part of the Aerospace Vehicle Systems Program Office that conducts fundamental research on advanced technologies for future flight vehicles. The objectives of the Morphing project are to develop and assess advanced technologies and integrated component concepts to enable efficient, multi-point adaptability in air and space vehicles. In the context of the project, the word "morphing" is defined as "efficient, multi-point adaptability" and may include micro or macro, structural or fluidic approaches. The current document on the Morphing project is a compilation of research summaries and other information on the project from fiscal year 2001. The focus of this document is to provide a brief overview of the project content, technical results and lessons learned from fiscal year 2001.

McGowan, Anna-Maria R.↗

Solar Water Heater

Skylab derived Heating System offers computerized control with an innovative voice synthesizer that literally allows the control unit to talk to the system user. It reports time of day, outside temperature and system temperature, and asks questions as to how the user wants the system programmed. Master Module collects energy from the Sun and either transfers it directly to the home water heater or stores it until needed.

Source record↗

Turbine Blade Research

Under contract with the New York State Energy Research and Development Authority, GE's Energy Systems Programs Department used a COSMIC program in assessing the problem of blade erosion in a PFB (pressurized fluid bed) environment. Data provided by this program and an associated program enabled the company engineers to determine gas velocities and the velocities of the particles striking the blades, calculations necessary for predicting blade erosion and potential damage. The assessment resulted in a new estimate for the allowable dust load for a modern heavy duty gas turbine.

Source record↗

Formation of Primitive Bodies in the Protoplanetary Nebula

We have developed a simple model of global transport of solids in the protoplanetary nebula, including radial drift of large particles and diffusion of small ones. The model has been applied to the formation and redistribution of the Ca-A1 rich refractory mineral inclusions (CAIs) found in primitive chondrites. These objects form at much higher temperatures, and appear to be 1-3 million years older than, the dominant (chondrule) components found in the same parent bodies. A widespread concern has been the retention of CAIs for this long against gas-drag-induced radial drift into the sun. We show that outward radial diffusion in a weakly turbulent nebula can overwhelm inward drift, and prevent significant numbers of CAI-size particles from being lost into the sun for tines on the order of several Myr. An element of this model is rapid inward radial drift of boulder-sized primitive (carbon-rich) silicate material, more like Halley-dust than CI chondrites in the early days of the nebula. Thls process can enrich the abundance of silicate and carbon material in the inner nebula, and may provide possible explanations for both chemical and isotopic properties of CAIs. The predicted enhancement of CO relative to water might be of relevance to recent IR astronomical observations of CO in the inner disks of several actively accreting T Tauri stars. This process has applications to the transport and redistribution of volatiles in general. Depending on the rubble particle size distribution, rapid radial drift of boulder-sized solids can bring more material inwards across a condensation front, to evaporate, than can subsequently be removed by nebula advection or diffusion, until a strong local enhancement is produced which allows diffusive loss to balance the drifting source. Application of this process to enhancement of the abundance of water near the "ice line" will be discussed. Supported by the Origins of Solar Systems program.

Cuzzi, Jeffrey N.↗

Sensitivity and Bias in Searches of Cockpit Display of Traffic Information Utilizing Highlighting/Lowlighting

A previous investigation showed that when bright and dim traffic symbols were mixed together on a cockpit display of traffic information, dim targets required longer search times than bright targets. The current experiment utilized Signal Detection methodology to determine the cause of this effect. Two factors were manipulated, Intensity and Mixture. The Intensity manipulation varied whether targets were bright or dim. The Mixture manipulation varied whether the brightness of all aircraft symbols was the same, or if half were bright and half dim. Participants were given 1.25 s to search a display of eight aircraft and determine whether a target was present or absent (50% of the time a target was present) and then rated their confidence in the accuracy of their decision. A Mixture by Intensity repeated-measures ANOVA on the signal detectability measure, A (a non- parametric variant of d ), revealed that targets presented at the dim intensity in the mixed condition yielded significantly lower sensitivity than either of the pure (homogenous) conditions or the bright targets in the mixed condition. There was not a significant difference in False Alarm rates between any conditions, indicating no change in decision criterion. Findings are discussed in terms of possible masking effects evoked by bright aircraft over the dim aircraft. Funding for this work was provided by the Advanced Air Transportation Technologies Project of NASA s Airspace Operation Systems Program.

Johnson, Walter W.↗

Effects of Symbol Brightness Cueing on Attention During a Visual Search of a Cockpit Display of Traffic Information

This study investigated visual search performance for target aircraft symbols on a Cockpit Display of Traffic Information (CDTI). Of primary interest was the influence of target brightness (intensity) and highlighting validity (search directions) on the ability to detect a target aircraft among distractor aircraft. Target aircraft were distinguished by an airspace course that conflicted with Ownship (that is, the participant's aircraft). The display could present all (homogeneous) bright aircraft, all (homogeneous) dim aircraft, or mixed bright and dim aircraft, with the target aircraft being either bright or dim. In the mixed intensity condition, participants may or may not have been instructed whether the target was bright or dim. Results indicated that highlighting validity facilitated better detection times. However, instead of bright targets being detected faster, dim targets were found to be detected more slowly in the mixed intensity display than in the homogeneous display. This relative slowness may be due to a delay in confirming the dim aircraft to be a target when it it was among brighter distractor aircraft. This hypothesis will be tested in future research. Funding for this work was provided by the Advanced Air Transportation Technologies Project of NASA's Airspace Operation Systems Program.

Johnson, Walter W.↗

Propulsion Control and Health Management (PCHM) Technology for Flight Test on the C-17 T-1 Aircraft

The C-I 7 T-l Globemaster III is an Air Force flight research vehicle located at Edwards Air Force Base. NASA Dryden and the C-17 System Program Office have entered into a Memorandum of Agreement to permit NASA the use of the C-I 7 T-I to conduct flight research on a mutually coordinated schedule. The C-17 Propulsion Control and Health Management (PCHM) Working Group was formed in order to foster discussion and coordinate planning amongst the various government agencies conducting PCHM research with a potential need for flight testing, and to communicate to the PCHM community the capabilities of the C-17 T-l aircraft to support such flight testing. This paper documents the output of this Working Group, including a summary of the candidate PCHM technologies identified and their associated benefits relative to NASA goals and objectives.

Simon, Donald L.↗

Aviation Particle Emissions Workshop

The Aviation Particle Emissions Workshop was held on November 18 19, 2003, in Cleveland, Ohio. It was sponsored by the National Aeronautic and Space Administration (NASA) under the Vehicle Systems Program (VSP) and the Ultra- Efficient Engine Technology (UEET) Project. The objectives were to build a sound foundation for a comprehensive particulate research roadmap and to provide a forum for discussion among U.S. stakeholders and researchers. Presentations included perspectives from the Federal Aviation Administration, the U.S. Environmental Protection Agency, NASA, and United States airports. There were five interactive technical sessions: sampling methodology, measurement methodology, particle modeling, database, inventory and test venue, and air quality. Each group presented technical issues which generated excellent discussion. The five session leads collaborated with their members to present summaries and conclusions to each content area.

Wey, Chowen C.↗

Wake Vortex Wingtip-Turbine Powered Circulation Control High-Lift System

NASA s Vehicle Systems Program is investing in aeronautics technology development across six vehicle sectors, in order to improve future air travel. These vehicle sectors include subsonic commercial transports, supersonic vehicles, Uninhabited Aerial Vehicles (UAVs), Extreme Short Takeoff and Landing (ESTOL) vehicles, Rotorcraft, and Personal Air Vehicles (PAVs). While the subsonic transport is firmly established in U.S. markets, the other vehicle sectors have not developed a sufficient technology or regulatory state to permit widespread, practical use. The PAV sector has legacy products in the General Aviation (GA) market, but currently only accounts for negligible revenue miles, sales, or market share of personal travel. In order for PAV s to ever capture a significant market, these small aircraft require technologies that permit them to be less costly, environmentally acceptable, safer, easier to operate, more efficient, and less dependent on large support infrastructures.

Moore, Mark D.↗

Novel Elastomeric Membranes Developed for Polymer Electrolytes in Lithium Batteries

Lithium-based polymer batteries for aerospace applications need to be highly conductive from -70 to 70 C. State-of-the-art polymer electrolytes are based on polyethylene oxide (PEO) because of the ability of its ether linkages to solvate lithium ions. Unfortunately, PEO has a tendency to form crystalline regions below 60 C, dramatically lowering conductivity below this temperature. PEO has acceptable ionic conductivities (10(exp -4) to 10(exp -3) S/cm) above 60 C, but it is not mechanically strong. The room-temperature conductivity of PEO can be increased by adding solvent or plasticizers, but this comes at the expense of thermal and mechanical stability. One of NASA Glenn Research Center s objectives in the Polymer Rechargeable System program (PERS) is to develop novel polymer electrolytes that are highly conductive at and below room temperature without added solvents or plasticizers.

Tigelaar, Dean M.↗

Compensation of Gravity-Induced Structural Deformations on a Beam- Waveguide Antenna Using a Deformable Mirror

At the NASA Deep Space Network (DSN) Goldstone Complex, a 34-meter- diameter beam-waveguide antenna, DSS-13, was constructed in 1988-1990 and has become an integral part of an advanced systems program and a test bed for technologies being developed to introduce Ka-band (32 GHz) frequencies into the DSN. A method for compensating the gravity- induced structural deformations in this large antenna is presented.

technologies DSN↗

Project Risk Management

Project risk management is primarily concerned with performance, reliability, cost, and schedule. Environmental risk management is primarily concerned with human health and ecological hazards and likelihoods. This paper discusses project risk management and compares it to environmental risk management, both with respect to goals and implementation. The approach of the Jet Propulsion Laboratory to risk management is presented as an example of a project risk management approach that is an extension to NASA NHB 7120.5: Management of Major System Programs and Projects.

Risk Management↗

Emulating the Lateral Dynamics of a Range of Vehicles Using a Four-Wheel-Steering Vehicle

The concept of Variable Dynamic Testbed Vehicle (VDTV) has been proposed as a tool to evaluate collision detection/avoidance systems, to perform vehicle-related human factors research, and to support other Automated HighWay System programs. The goal of this study is to analytically investigate to what extent a VDTV with four-wheel-steering can emulate the lateral dynamics of a broad range of vehicle models.

Four-wheel-steering varible dynamic testbed vehicl↗

The cascade high productivity language

This paper describes the design of Chapel, the Cascade High Productivity Language, which is being developed in the DARPA-funded HPCS project Cascade led by Cray Inc. Chapel pushes the state-of-the-art in languages for HEC system programming by focusing on productivity, in particular by combining the goal of highest possible object code performance with that of programmability offered by a high-level user interface.

high productivity languages↗

Structurally Integrated Antenna Concepts for HALE UAVs

This technical memorandum describes work done in support of the Multifunctional Structures and Materials Team under the Vehicle Systems Program's ITAS (Integrated Tailored Aero Structures) Project during FY 2005. The Electromagnetics and Sensors Branch (ESB) developed three ultra lightweight antenna concepts compatible with HALE UAVs (High Altitude Long Endurance Unmanned Aerial Vehicles). ESB also developed antenna elements that minimize the interaction between elements and the vehicle to minimize the impact of wing flexure on the EM (electromagnetic) performance of the integrated array. In addition, computer models were developed to perform phase correction for antenna arrays whose elements are moving relative to each other due to wing deformations expected in HALE vehicle concepts. Development of lightweight, conformal or structurally integrated antenna elements and compensating for the impact of a lightweight, flexible structure on a large antenna array are important steps in the realization of HALE UAVs for microwave applications such as passive remote sensing and communications.

Cravey, Robin L.↗