Search NASA⌕ Search

SEARCH · Search NASA

Results for “robot operating system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Simulating Mars: Enabling Testing of the Perseverance Rover Sampling and Caching Subsystem on Earth

The development of the Sampling and Caching Subsystem (SCS) on the JPL Perseverance Rover lies at the intersection of testing, robotics, and geology. The SCS team established three primary system test campaigns and venues to aid in the development of SCS through verification and validation testing – Qualification Model Dirty Testing (QMDT) to provide a venue for testing in a Martian environment, Vehicle System Testbed (VSTB) for testing while integrated with the mobility subsystem on Martian-like terrain, and the Flight Software Testbed (FSWTB) for conducting tests using the flight motor controllers and software system on a hexapod which had the ability to simulate rover tilt. Each venue contributed a vital piece to the SCS building blocks. However, the QMDT venue operating within a 10-ft diameter Thermal Vacuum chamber to simulate Martian environment provided a sui generis opportunity to fine tune the entire sampling and caching process while building the team’s knowledge base about rock drillability, system life, and target selection. On Earth, because Martian rocks are not readily available, the development team must utilize geoanalogs to the rocks and regolith on Mars. Geologists on the team helped establish a set of standard rock types to use for Mars missions, like Basalt, Sandstone, Mudstone, Gypsum, and other related geoanalogs. These geoanalogs are characterized with a standard suite of tests for density, compressibility, and other characteristics to categorize potential drillability. This concept of drillability is what links the geoanalogs on Earth to the samples we collect on Mars. With the simulant characteristics defined, these geoanalog rocks are ready to be drilled into as we do on the Martian surface. A key aspect of interacting with the surface on Mars is rock target identification and selection. The Perseverance robotic system uses the on-board cameras, instrumentation, and software to collect enough information to identify potential scientific targets. With the targets identified, SCS can place the Corer and abrade the surface or collect a sample. For a ground test activity like QMDT, the test team did not have all of the camera and instrumentation systems that the rover does, so the team developed ground test equivalents to process a rock, build a target map, and define the target. The team constructed a Rock Scanning Station to build a 3D point cloud of the rock. This point cloud was then processed and evaluated with predefined and programmed criteria in a Target Downselect Tool. A primary output of the Target Downselect Tool is a defined target that can be uploaded directly to the robotic software system to simulate and build the robotic sequences used in tests. With these insights and programmatic definition of targets, the QMDT test team was able to make the same decisions that the Perseverance surface operations team does. In addition, valuable lessons learned from developing the target selection ground tools and using them were implemented into the tools used for surface operations.

Kim, Junggon↗

Validation of Space Weather Models at Community Coordinated Modeling Center

The Community Coordinated Modeling Center (CCMC) is a multi-agency partnership to support the research and developmental work necessary to substantially increase space weather modeling capabilities and to facilitate advanced models deployment in forecasting operations. Space weather models and coupled model chains hosted at the CCMC range from the solar corona to the Earth's upper atmosphere. CCMC has developed a number of real-time modeling systems, as well as a large number of modeling and data products tailored to address the space weather needs of NASA's robotic missions. The CCMC conducts unbiased model testing and validation and evaluates model readiness for operational environment. CCMC has been leading recent comprehensive modeling challenges under GEM, CEDAR and SHINE programs. The presentation will focus on experience in carrying out comprehensive and systematic validation of large sets of. space weather models

Kuznetsova, M. M.↗

Noncoherent Tracking of a Source of a Data-Modulated Signal

A proposed tracking receiver system containing three suitably positioned antenna elements and special signal-processing equipment would determine the direction of incidence of a microwave signal containing spread-spectrum digital data modulation. If the system were to contain two sets of antenna elements separated by a known baseline, it could determine the location of the transmitter as the intersection of the lines of incidence on the two antennas. Such systems could be used for diverse purposes in outer space and on Earth, including tracking astronauts and small robotic spacecraft working outside a spacecraft or space station, and locating cellular telephones from which distress calls have been made. The principle of operation does not require the transmission of a special identifying or distress signal by the cellular telephone or other transmitter to be tracked; instead, the system could utilize the data signal routinely sent by the transmitter, provided that the signal had the characteristics needed for processing.

Arndt, G. Dickey↗

A Protoflight Lightweight Surface Manipulation System to Enable High-Load, Long-Reach Lunar Surface Operations

There is a current critical need under the Artemis program for a versatile, high-load, long reach manipulation system that can provide payload offloading and handling for lunar landers. The Lightweight Surface Manipulation System (LSMS) is a highly structurally efficient, long-reach robotic arm that can be sized for a wide range of missions and payload ranges. The LSMS has more than a decade of heritage and testing at NASA Langley Research Center (LaRC), including laboratory and field testing of multiple end-effector tools and operational scenarios. With the need for rapid development of a flight-proven offloading capability and the desire to have that device be reusable for future missions and services, a 4-year program was initiated this year under NASA’s Space Technology Mission Directorate, to develop and build a protoflight unit of the LSMS, capable of lifting 1,000 kg on the Moon at an 8-meter reach. The target mission is to fly on a large cargo lander as a technology demonstrator to validate self-leveling, deployment, and payload handling operations, with future flights adding additional tools and capabilities. This paper provides a summary of the prior decade of work on the LSMS, the current mission drivers and goals, and details the first year of development of the LSMS toward a protoflight unit.

LSMS↗

Automated assembly of large space structures using an expert system executive

NASA LaRC has developed a unique testbed for investigating the practical problems associated with the assembly of large space structures using robotic manipulators. The testbed is an interdisciplinary effort which considers the full spectrum of assembly problems from the design of mechanisms to the development of software. This paper will describe the automated structures assembly testbed and its operation, detail the expert system executive and its development, and discuss the planned system evolution. Emphasis will be placed on the expert system development of the program executive. The executive program must be capable of directing and reliably performing complex assembly tasks with the flexibility to recover from realistic system errors. By employing an expert system, information pertaining to the operation of the system was encapsulated concisely within a knowledge base. This lead to a substantial reduction in code, increased flexibility, eased software upgrades, and realized a savings in software maintenance costs.

Allen, Cheryl L.↗

NASA Lunar Surface Innovation Initiative: Ensuring a Cohesive, Executable Strategy for Technology Development

Establishing a sustainable human presence on the Moon allows NASA to develop and test new approaches, technologies, and systems that will enable us to function in other, more challenging environments. The Lunar Surface Innovation Initiative (LSII) was established in 2019 and has evolved into a key agency asset to spur technology development and provide risk reduction for lunar surface system development and flight demonstrations. LSII coordinates activities implemented through a combination of in-house activities, competitive programs, and public-private partnerships to create transformative technologies needed for lunar surface exploration. This paper will outline the LSII model used to develop a technology pipeline that will retire the primary technology hurdles in six capability areas. In-situ resource utilization technologies for collecting, processing, storing, and using material found or manufactured on the Moon. Surface power technologies that provide the capability for sustainable, continuous power throughout the day and night for lunar missions. Dust mitigation strategies that diminish lunar dust hazards on lunar surface systems such as cameras, solar panels, space suits, habitats, and instrumentation. Extreme environments technologies that enable systems to operate throughout the full range of lunar surface conditions, including lunar noon (up to 150 at the equator), night (down to - 180 at the equator), multiple day/night cycles, and in permanently shadowed regions (down to -250). Extreme access technologies that enable humans or robotic systems to access, navigate, and explore previously inaccessible lunar surface or subsurface areas. Excavation and construction technologies that will allow affordable, autonomous manufacturing or construction. We outline key results, including milestones and achievements related to the capability areas and outcomes from partnerships with the commercial sector. A key tenet of the LSII is the Lunar Surface Innovation Consortium (LSIC), a collaboration across industry, academia, and government to successfully develop the transformative capabilities for lunar surface exploration. LSIC provides a forum for NASA to communicate technological requirements, needs, and opportunities and for the community to share existing capabilities and identify critical gaps with NASA. By working side by side with commercial enterprises and our international partners, NASA is able to combine the knowledge and expertise needed to explore the lunar surface and make technical advances that will feed technological and economic growth. Since its inception, LSII has engaged over 600 organizations across the United States and 46 countries to shape the technologies and systems needed to explore the lunar surface and stimulate a lunar surface economy.

lunar, lunar surface, technology development, ISRU↗

NASA Lunar Surface Innovation Initiative: Ensuring a Cohesive, Executable Strategy for Technology

Establishing a sustainable human presence on the Moon allows NASA to develop and test new approaches, technologies, and systems that will enable us to function in other, more challenging environments. The Lunar Surface Innovation Initiative (LSII) was established in 2019 and has evolved into a key agency asset to spur technology development and provide risk reduction for lunar surface system development and flight demonstrations. LSII coordinates activities implemented through a combination of in-house activities, competitive programs, and public-private partnerships to create transformative technologies needed for lunar surface exploration. This paper will outline the LSII model used to develop a technology pipeline that will retire the primary technology hurdles in six capability areas. In-situ resource utilization technologies for collecting, processing, storing, and using material found or manufactured on the Moon. Surface power technologies that provide the capability for sustainable, continuous power throughout the day and night for lunar missions. Dust mitigation strategies that diminish lunar dust hazards on lunar surface systems such as cameras, solar panels, space suits, habitats, and instrumentation. Extreme environments technologies that enable systems to operate throughout the full range of lunar surface conditions, including lunar noon (up to 150 at the equator), night (down to - 180 at the equator), multiple day/night cycles, and in permanently shadowed regions (down to -250). Extreme access technologies that enable humans or robotic systems to access, navigate, and explore previously inaccessible lunar surface or subsurface areas. Excavation and construction technologies that will allow affordable, autonomous manufacturing or construction. We outline key results, including milestones and achievements related to the capability areas and outcomes from partnerships with the commercial sector. A key tenet of the LSII is the Lunar Surface Innovation Consortium (LSIC), a collaboration across industry, academia, and government to successfully develop the transformative capabilities for lunar surface exploration. LSIC provides a forum for NASA to communicate technological requirements, needs, and opportunities and for the community to share existing capabilities and identify critical gaps with NASA. By working side by side with commercial enterprises and our international partners, NASA is able to combine the knowledge and expertise needed to explore the lunar surface and make technical advances that will feed technological and economic growth. Since its inception, LSII has engaged over 600 organizations across the United States and 46 countries to shape the technologies and systems needed to explore the lunar surface and stimulate a lunar surface economy.

Lunar↗

Numerical analysis of nonminimum phase zero for nonuniform link design

As the demand for light-weight robots that can operate in a large workspace increases, the structural flexibility of the links becomes more of an issue in control. When the objective is to accurately position the tip while the robot is actuated at the base, the system is nonminimum phase. One important characteristic of nonminimum phase systems is system zeros in the right half of the Laplace plane. The ability to pick the location of these nonminimum phase zeros would give the designer a new freedom similar to pole placement. This research targets a single-link manipulator operating in the horizontal plane and modeled as a Euler-Bernoulli beam with pinned-free end conditions. Using transfer matrix theory, one can consider link designs that have variable cross-sections along the length of the beam. A FORTRAN program was developed to determine the location of poles and zeros given the system model. The program was used to confirm previous research on nonminimum phase systems, and develop a relationship for designing linearly tapered links. The method allows the designer to choose the location of the first pole and zero and then defines the appropriate taper to match the desired locations. With the pole and zero location fixed, the designer can independently change the link's moment of inertia about its axis of rotation by adjusting the height of the beam. These results can be applied to the inverse dynamic algorithms that are currently under development.

Girvin, Douglas L.↗

Design reuse experience of space and hazardous operations robots

A comparison of design drivers for space and hazardous nuclear waste operating robots details similarities and differences in operations, performance and environmental parameters for these critical environments. The similarities are exploited to provide low risk system components based on reuse principles and design knowledge. Risk reduction techniques are used for bridging areas of significant differences. As an example, risk reduction of a new sensor design for nuclear environment operations is employed to provide upgradeable replacement units in a reusable architecture for significantly higher levels of radiation.

Oneil, P. Graham↗

Advanced teleoperation: Technology innovations and applications

The capability to remotely, robotically perform space assembly, inspection, servicing, and science functions would rapidly expand our presence in space, and the cost efficiency of being there. There is considerable interest in developing 'telerobotic' technologies, which also have comparably important terrestrial applications to health care, underwater salvage, nuclear waste remediation and other. Such tasks, both space and terrestrial, require both a robot and operator interface that is highly flexible and adaptive, i.e., capable of efficiently working in changing and often casually structured environments. One systems approach to this requirement is to augment traditional teleoperation with computer assists -- advanced teleoperation. We have spent a number of years pursuing this approach, and highlight some key technology developments and their potential commercial impact. This paper is an illustrative summary rather than self-contained presentation; for completeness, we include representative technical references to our work which will allow the reader to follow up items of particular interest.

Schenker, Paul S.↗

STS-109 Flight Day 8 Highlights

Footage of the eighth day of STS-109 is shown during which Mission Specialists John Grunsfeld and Rick Linnehan service the Hubble Space Telescope (HST). A broad overview of the Columbia Orbiter mission is presented. On the fifth extravehicular activity (EVA) of the mission, Grunsfeld and Linnehan installed a new cryogenic cooling system and radiator on HST for NICMOS (Near Infrared Camera and Multi-Object Spectrometer) which had not been previously operational due to the failure of an earlier cooling system. Linnehan and Grunsfeld are both shown on the end of the Orbiter's robot arm, the Remote Manipulator System, which was controlled by Commander Scott Altman. Following the completion of their spacewalks, the two Mission Specialists make statements which include thanking the numerous support personnel. Linnehan answers questions on the differences between training simulation at facilities such as the Neutral Buoyancy Lab (NBL) and his actual experiences in space.

Source record↗

Dust Tolerant EVA-Compatible Connectors

The objectives of this project are to develop connectors (quick disconnects and umbilical systems) that can be repetitively and reliably mated and de-mated during Lunar surface extra-vehicular activities. These standardized interfaces will be required for structural integrity and commodities transfer between linked surface elements. QD's fittings are needed for EVA spacesuit Primary Life Support Systems as well as liquid cooled garment circulation and suit heat rejection. Umbilical electro-mechanical systems (connectors) are needed between discrete surface systems for transfer of air, power, fluid (water), and data must be capable of being operated by extra vehicular astronaut crew members and/or robotic assistants. There exists an urgent need to prevent electro-statically charged dust and debris from clogging and degrading the interface seals and causing leakage and spills of hazardous commodities, contaminating the flowstream, and degrading the mechanisms needed for umbilical connection. Other challenges include modularity, standardization, autonomous operation, and lifetime sealing issues.

Mueller, Robert P.↗

Evaluation of the Simple Safe Site Selection (S4) Hazard Detection Algorithm Using Helicopter Field Test Data

Small scale terrain hazards, such as rocks, slopes, and craters, can pose significant risk to landing spacecraft and rover or payload deployment. Onboard Hazard Detection and Avoidance (HDA) systems scan and analyze the landing area for these hazards in real time during descent, and divert the spacecraft to the safest touchdown site. The computationally efficient Simple Safe Site Selection (S4) algorithm combined with a flash LIDAR is an HDA system geared towards small robotic spacecraft. Rather than creating and analyzing a digital elevation map (DEM) from potentially many overlapping range images, S4 operates directly on a single flash LIDAR image. Extending prior work that has analyzed S4 performance for Mars landing using extensive simulations, this paper evaluates S4 performance using actual flash LIDAR images of an artificial hazard field acquired during a 2014 helicopter field test in Death Valley, CA. In particular, we describe LIDAR characterization and calibration, creation of ground truth elevation and safety maps, creation of ground truth sensor poses, actual S4 algorithm processing, and performance analysis. The results show that the safety cost images produced by S4 are remarkably close to the ground truth safety map (computed offline by an HDA algorithm developed under the Autonomous Landing and Hazard Avoidance (ALHAT) project) at significantly reduced computational cost, confirming S4 as a viable candidate algorithm for onboard spacecraft HDA.

Luna, Michael E.↗

Idaho National Laboratory’s Mobile Hot Cell Transportation: Engineering Solutions for Global Disused Sealed Radioactive Sources.

Title: Idaho National Laboratory’s Mobile Hot Cell Transportation: Engineering Solutions for Global Disused Sealed Radioactive Sources. Abstract: The Mobile Hot Cell (MHC), currently under development by Idaho National Laboratory (INL) for the Off-Site Source Recovery Project (OSRP), is designed to help international partners meet the unique challenges of end-of-life radioactive material management. The MHC will provide a critical resource for countries that require assistance securing and disposing of Disused Sealed Radioactive Sources (DSRS) and orphaned sources in challenging environments, allowing these sources to be secured against misuse and nefarious activities. The MHC is a rapidly deployable system for conditioning and preparing end-of-life radioactive sources for transportation or storage. It is designed to handle sources of up to 1,000 Ci Co-60 equivalent while maintaining full radiological and biological containment. It will be deployable within 48 hours of an alert, making it ideal for emergency situations. The MHC features an operational suite for control, support racks for electronics, pneumatics, and welding systems, and a modular robust steel structure providing radiological shielding and internal robotic support. This design allows configurations for multiple device types to be conditioned and the ability to safely manage routine issues such as leaking or damaged sources. The MHC has been designed with the transportation challenges of rapid deployment to difficult environments in mind. The system weighs approximately 150,000 pounds, with individual systems breaking down into pieces not exceeding 20,000 pounds. Components are to be transportable on standard 20ft ISO containers, with shielding shells on 20ft flat racks. It is estimated that a total of eight containers and flat racks will be required. The use of 20ft containers, as opposed to 40ft containers, minimizes the impact on less developed road infrastructures, enabling the MHC to be positioned in constrained environments such as hospital parking lots. The system’s modularity also allows for deployment using smaller equipment, such as a 10-ton boom truck or forklift, which is crucial given the potential logistical challenges in different countries. This transportation strategy, evaluated in collaboration with Utah State University, ensures the MHC can be deployed via ground, rail, sea, or air, addressing the primary concern of international transport logistics.

99 - GENERAL AND MISCELLANEOUS↗

High performance architecture for robot control

Practical aspects of the design and implementation of a modular, high performance, parallel computer control system for telerobots are discussed. Topics of consideration include system architecture, operator interface, and control execution. In a laboratory environment, a telerobotics test control configuration is used to obtain measurements on communications and control loop timing for use in an effective full scale operational system design. The feasibility of the selected architectural approach has been successfully demonstrated. The modularity of the software and hardware enables ease of transport for use in the operational system. The distributed partioning of the control algorithms and the performance measurements acquired during control system implementation are discussed.

Byler, E.↗

Robot dynamics in reduced gravity environment

Robot dynamics and control will become an important issue for productive platforms in space. Robotic operations will be necessary for both man tended stations and for the efficient performance of routine operations in a manned platform. The current constraints on the use of robotic devices in a microgravity environment appears to be due to safety concerns and an anticipated increase in acceleration levels due to manipulator motion. The robot used for the initial studies was a UMI RTX robot, which was adapted to operate in a materials processing workcell to simulate sample changing in a microgravity environment. The robotic cell was flown several times on the KC-135 aircraft at Ellington Field. The primary objective of the initial flights was to determine operating characteristics of both the robot and the operator in the variable gravity of the KC-135 during parabolic maneuvers. It was demonstrated that the KC-135 aircraft can be used for observing dynamics of robotic manipulators. The difficulties associated with humans performing teleoperation tasks during varying G levels were also observed and can provide insight into some areas in which the use of artificial techniques would provide improved system performance. Additionally a graphic simulation of the workcell was developed on a Silicon Graphics Workstation using the IGRIP simulation language from Deneb Robotics. The simulation is intended to be used for predictive displays of the robot operating on the aircraft. It is also anticipated that this simulation can be useful for off-line programming of tasks in the future.

Workman, Gary L.↗

Force reflecting hand controller for manipulator teleoperation

A force reflecting hand controller based upon a six degree of freedom fully parallel mechanism, often termed a Stewart Platform, has been designed, constructed, and tested as an integrated system with a slave robot manipulator test bed. A force reflecting hand controller comprises a kinesthetic device capable of transmitting position and orientation commands to a slave robot manipulator while simultaneously representing the environmental interaction forces of the slave manipulator back to the operator through actuators driving the hand controller mechanism. The Stewart Platform was chosen as a novel approach to improve force reflecting teleoperation because of its inherently high ratio of load generation capability to system mass content and the correspondingly high dynamic bandwidth. An additional novelty of the program was to implement closed loop force and torque control about the hand controller mechanism by equipping the handgrip with a six degree of freedom force and torque measuring cell. The mechanical, electrical, computer, and control systems are discussed and system tests are presented.

Bryfogle, Mark D.↗