Search NASA⌕ Search

SEARCH · Search NASA

Results for “static testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Comparison of woven and stitched out-of-autoclave E-glass/epoxy composites subjected to quasi-static and cyclic tensile loads

Tensile quasi-static and fatigue behaviors of out-of-autoclave, quasi-isotropic, E-glass/epoxy composites with woven and stitched fiber architectures are compared. Some specimens were cyclically loaded to failure, while others were tested for residual modulus and ultimate strength. Both laminates survived 10 7 cycles at a maximum stress of 94.8 MPa but failed prior to 10 7 cycles at a maximum stress greater than or equal to 124.1 MPa. For the stress-lifetime diagram and residual strength, the woven laminate had superior properties below 10 4 cycles and the stitched laminate had superior properties above 10 5 cycles. While intralaminar crack density was higher in the stitched laminate, the woven laminate demonstrated a higher percentage of delaminated area.

Materials Science↗

Prediction of softening kinetics and recrystallization texture in non-isothermally annealed bulged tubes using CPFEM and CA models

A hierarchically coupled cellular automata (CA) model, crystal plasticity finite element method (CPFEM), and thermal finite element (FE) model is developed to predict the softening kinetics of the bulged steel tube during non-isothermal annealing. Through the developed model, the kinetics of softening mechanisms including static recovery (SRV) and static recrystallization (SRX), as well as the recrystallization texture are predicted. Later, the Johnson-Mehl-Avrami-Kohnogorov (JMAK) model based on the predicted SRX data is developed to interpret the recrystallization behavior of the material. To perform this study, diverse experimental tests including tube hydroforming (THF), annealing, uniaxial tensile test, hardness test, as well as microstructure observations through optical microscopy and Electron Backscatter Diffraction (EBSD) tests on steel tube are performed. The obtained experimental data are utilized to calibrate and verify the implemented CPFEM model for simulation of THF process, thermal FE model for prediction of the local temperature over annealing time, and CA algorithm for modeling of the softening kinetics and texture evolution throughout the annealing process. The study shows that the predicted deformation characteristics, softening kinetics, recrystallization texture and temperature profile during non-isothermal annealing are in good agreement with experimental data. During the annealing process, a total of four stages for the kinetics of softening mechanisms is observed: No softening; SRV only; SRV dominant; and SRX dominant. During the progress of SRX, the behavior of recrystallization is abruptly changed, confirming that two different mechanisms are controlling the kinetics of transformation.

36 MATERIALS SCIENCE↗

Probe microscopy is all you need *

We pose that microscopy offers an ideal real-world experimental environment for the development and deployment of active Bayesian and reinforcement learning methods. Indeed, the tremendous progress achieved by machine learning (ML) and artificial intelligence over the last decade has been largely achieved via the utilization of static data sets, from the paradigmatic MNIST to the bespoke corpora of text and image data used to train large models such as GPT3, DALL·E and others. However, it is now recognized that continuous, minute improvements to state-of-the-art do not necessarily translate to advances in real-world applications. We argue that a promising pathway for the development of ML methods is via the route of domain-specific deployable algorithms in areas such as electron and scanning probe microscopy and chemical imaging. This will benefit both fundamental physical studies and serve as a test bed for more complex autonomous systems such as robotics and manufacturing. Favorable environment characteristics of scanning and electron microscopy include low risk, extensive availability of domain-specific priors and rewards, relatively small effects of exogenous variables, and often the presence of both upstream first principles as well as downstream learnable physical models for both statics and dynamics. Recent developments in programmable interfaces, edge computing, and access to application programming interfaces (APIs) facilitating microscope control, all render the deployment of ML codes on operational microscopes straightforward. We discuss these considerations and hope that these arguments will lead to create novel set of development targets for the ML community by accelerating both real world ML applications and scientific progress.

47 OTHER INSTRUMENTATION↗

An interrupted tensile testing at high strain rates for pure copper bars

A high-speed tensile facility (HSTF) invented by us was applied to interrupting the tests for pure copper specimen bars controlled locally at different levels of elongation. It was realized to isolate and identify the different stages of the dynamic fracture process of the pure copper specimen bar under impact tension. The results of scanning electron microscopical (SEM) investigation of the recovered pure copper specimens show that the void evolution near the surface of the minimum cross-section of the necking area is more severe than that at the middle of the necking area, which may be connected with the findings discussed by Alves and Jones [J. Mech. Phys. Solids 47, 643 (1999)]. The constitutive models in a certain range of strain determined from the tensile split Hopkinson bar optimized by us were employed and adjusted in numerically simulating the large deformation of the pure copper specimen in the interrupted tensile tests on HSTF. The dependence of the instability strain of thermoviscoplastic materials in simple tension on material parameters delineated by Batra and Wei [Int. J. Impact Eng. 34, 448 (2007)] was inspected in predicting the diffuse necking of the specimen bar. The axisymmetric necking rod model with a central void under static tension presented by Ragab [Eng. Fract. Mech. 71, 1515 (2004)] was extended to predicting the local necking and fracture of the specimen bar under impact tension.

42 ENGINEERING↗

A modified many-body dissipative particle dynamics model for mesoscopic fluid simulation: methodology, calibration, and application for hydrocarbon and water

The many-body dissipative particle dynamics (mDPD) is a prominent mesoscopic multiphase model for fluid transport in mesoconfinement. However, it has been a long-standing challenge for mDPD (and other multiphase-enabled DPD models) to accurately predict real-fluid static and dynamic properties simultaneously. We have developed a modified mDPD model to overcome the issue and a rigorous calibration approach that uses reference data, including experimental and/or molecular dynamics (MD) simulations to parameterise the modified mDPD for real fluids. We choose heptane as a representative example of hydrocarbon in source rocks to demonstrate the model's capability to accurately predict the equation of state (EOS), free surface tension, diffusivity, and viscosity. Our timing test shows that the modified mDPD is 400–500 times faster than its MD counterpart for simulating bulk heptane in equivalent volumes. To further demonstrate the robustness of the model, we revisited the benchmark problem of mesoscopic modelling of water, in which all the previous works on DPD reported only a limited portion of the water properties. Here, we show that the modified mDPD can provide accurate modelling of water static and dynamic properties and an EOS that matches the experimental data to a large range of confinement pressure.

42 ENGINEERING↗

Failure analysis of field-failed bypass diodes

Defective bypass diodes are often found as the largest factor leading to power loss in solar modules. Here, we report on failure mechanisms by investigating shunted bypass diodes from a rooftop installation, using a combination of multiple characterizations including current–voltage analysis, thermal-runaway testing, X-ray computed tomography, lock-in thermography, focused ion-beam cross-section imaging, chemical decapsulation, optical microscopy, and scanning electron microscopy with energy-dispersive X-ray spectroscopy. Differing from static discharge typically associated with lightning strikes on modules, we found diode failure by the mechanism of thermal damage under continuous, long-term overstress in forward bias. Our conclusion is based on evidence of energy dissipated—the small to medium extent of melt-through on the Schottky diode face. The diode failure shows distortions or roughening of the Schottky diode metal-semiconductor interface with the die attach, and some failures are accompanied by die-attach solder melting. We propose that nonuniform irradiance on the modules caused diode shunting due to extended periods of heat dissipation in the modules, because modules in this string were placed in two different orientations. In contrast, a second parallel module string of the same module type on the same rooftop with a unique plane of array did not show any diode failures. The thermal damage failure of melt-through was caused by the long-term current generated by overstressing of diodes that may have had crystalline and impurity defects.

14 SOLAR ENERGY↗

Studies of the shapes of heavy pear-shaped nuclei at ISOLDE

For certain combinations of protons and neutrons there is a theoretical expectation that the shape of nuclei can assume octupole deformation, which would give rise to reflection asymmetry or a ”pear-shape” in the intrinsic frame, either dynamically (octupole vibrations) or statically (permanent octupole deformation). I will briefly review the historic evidence for reflection asymmetry in nuclei and describe how recent experiments carried out at REX-ISOLDE have constrained nuclear theory and how they contribute to tests of extensions of the Standard Model. I will also discuss future prospects for measuring nuclear shapes from Coulomb Excitation: experiments are being planned that will exploit beams from HIE-ISOLDE that are cooled in the TSR storage ring and injected into a solenoidal spectrometer similar to the HELIOS device developed at the Argonne National Laboratory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Effects of Gamma Ray Integrated Dose on a Commercial 65-nm SRAM Device

Here this work shows that the static random access memory (SRAM) error rate for a commercial 65-nm device in a dose rate environment can be highly dependent upon the integrated dose (dose rate × pulse duration). While the typical metric for such testing is dose rate upset (DRU) level in rad(Si)/s, a series of dose rate experiments at Little Mountain Test Facility (LMTF) shows dependence on the integrated dose. The error rate is also found to be dependent on the core voltage, and the preradiation value of the bits. We believe that these effects are explained by a well charge depletion caused by gamma ray photocurrent.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

NEAMS-Funded University Research in Support of TREAT Modeling and Simulation, FY15

This report summarizes university research activities performed in support of TREAT modeling and simulation research. It is a compilation of annual research reports from four universities: University of Florida, Texas A&M University, Massachusetts Institute of Technology and Oregon State University. The general research topics are, respectively, (1) 3-D time-dependent transport with TDKENO/KENO-VI, (2) implementation of the Improved Quasi-Static method in Rattlesnake/MOOSE for time-dependent radiation transport approximations, (3) improved treatment of neutron physics representations within TREAT using OpenMC, and (4) steady state modeling of the minimum critical core of the Transient Reactor Test Facility (TREAT).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

H2OI95: A Stand-Alone Fortran Code for Evaluating the IAPWS-95 Equation-of-State Model for Water (Rev. 1)

H2OI95 is a stand-alone Fortran code for evaluating the IAPWS-95 equation-of-state model for the thermodynamic properties of water. It also evaluates the corresponding thermochemical properties of water consistent with the CODATA recommendations. The IAPWS-95 model is based on a model equation for the dimensionless Helmholtz energy for which the primary variables are the inverse reduced temperature (τ = T cr /T ) and reduced density (δ = ρ/ρ cr ). Here T is the absolute temperature (K), ρ is density (kg/m³), and the subscript “ cr ” refers to the critical point of water (647.096 K and 22.064 MPa pressure in this model, for which ρ cr is 322 kg/m³). The code solves four basic types of problems, distinguished by the specified inputs: 1. Temperature (K) and density (ρ kg/m³) or reduced density (δ) 2. Temperature (K) and pressure (MPa). 3. Temperature (K) on the saturation (liquid-vapor equilibrium) curve 4. Pressure (MPa) on the saturation curve. Each type of problem is run using a corresponding input (text) file. All but the first type of problem require iteration. For example, to solve for desired temperature and pressure, the reduced density must be adjusted to give the desired pressure. Iteration is accomplished using the Newton-Raphson method, though the secant method is also used in solving the fourth type of problem. For the last three types of problems, H2OI95 has been used to conduct numerical studies of convergence and the problem of multiple numerical solutions, some of which are not physically valid. Obtaining valid results depends mainly on appropriate choice of starting values for the density. The default values used in H2OI95 appear to consistently lead to generally desired results. With modification (not addressed here), H2OI95 can be used to support SUPCRT92 and similar codes that compute chemical thermodynamic properties of species and reactions over a wide range of temperature and pressure (273.16-1273K and 0-1000 MPa). Version 1.1 of this software calculates an extended set of water properties, including some derivable solely from IAPWS-95, such as the isobaric thermal expansivity and the isothermal compressibility, and still other properties based on supplementary models sanctioned by IAPWS, including the dynamic viscosity, thermal conductivity, surface tension, and static dielectric constant, and various other properties (notably Debye-Hückel parameters) derivable from the dielectric constant and its partial derivatives with respect to temperature and pressure. A coding error in Version 1.0 was identified while testing the implementation of the viscosity model. This error is described in Appendix C. It mainly affects calculation of “higher order” properties such as compressibility and heat capacity near the critical point.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Finite element analyses of continuous filament ties for masonry applications : final report for the Arquin Corporation.

Finite-element analyses were performed to simulate the response of a hypothetical vertical masonry wall subject to different lateral loads with and without continuous horizontal filament ties laid between rows of concrete blocks. A static loading analysis and cost comparison were also performed to evaluate optimal materials and designs for the spacers affixed to the filaments. Results showed that polypropylene, ABS, and polyethylene (high density) were suitable materials for the spacers based on performance and cost, and the short T-spacer design was optimal based on its performance and functionality. Simulations of vertical walls subject to static loads representing 100 mph winds (0.2 psi) and a seismic event (0.66 psi) showed that the simulated walls performed similarly and adequately when subject to these loads with and without the ties. Additional simulations and tests are required to assess the performance of actual walls with and without the ties under greater loads and more realistic conditions (e.g., cracks, non-linear response).

42 ENGINEERING↗

MHz-rate Laser Spectroscopic Instrument for Reacting Flow Composition and Temperature Measurements inside Rotating Detonation Engines (RDEs)

Rotating Detonation Engine (RDE) is a concept with the potential of realizing a pressure gain architecture that will lead to improved efficiency in power generation and propulsion systems. However, there are many questions on stable operation and effectively recovering flow such that it may be used in power production. To this end, a Tunable Diode Laser Absorption Spectrometer (TDLAS) was developed which targets H2O at two wavelengths for resolving composition and static temperature of the reacting medium within an RDE combustion channel. Coupling this information with velocity measurements, the total pressure may be resolved. Preliminary results from application of the sensor to hydrogen fired Aerojet Rocketdyne engine test are discussed.

03 NATURAL GAS↗

Observations of Gravity Waves in the Middle Atmosphere of Mars

Gravity waves are ubiquitous throughout the atmosphere of Mars. Their propagation and dissipation influence the circulation and thermal structure of the middle and upper atmosphere. Yet there have been few studies of gravity wave characteristics in the middle atmosphere, a region that is critical for their propagation from generation in the lower atmosphere to dissipation and associated exchanges of momentum and energy in the upper atmosphere. There have been few studies because few atmospheric profiles span the middle atmosphere with the kilometer-scale or smaller vertical resolution that is Required to characterize gravity waves. Here we report the characterization of gravity waves in the middle atmosphere using 12 high-resolution atmospheric density profiles. Four of these were acquired from a ground-based stellar occultation from 1976 that yielded immersion and emersion profiles on opposite sides of the planet, and the remaining eight were measured during atmospheric entry by landers and rovers. Predominant wavelengths were 3–14 km, and amplitudes were generally 0.8%–2.5%. Where static stability is large and positive, gravity waves grow efficiently. In other instances, static stability is not large and positive over a wide altitude range, and gravity wave amplitudes do not behave as neatly. These observations of gravity waves in the middle atmosphere of Mars can be used to test gravity wave parameterizations in large-scale general circulation models and to investigate predictions for how gravity wave propagation and dissipation influence the circulation and thermal structure of the middle and upper atmosphere.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sandbox for Mac Malware v 1.0

This software is an analyzer for automated sandbox analysis of malware on the OS X operating system. It runs inside an OS X virtual machine to collect data about what happens when a given file is opened or run. As of August 2014, there was no sandbox software for Mac OS X malware, as it requires different methods from those used on the Windows OS (which most sandboxes are written for). This software adds OS X analysis capabilities to an existing open-source sandbox, Cuckoo Sandbox (http://cuckoosandbox.org/), which previously only worked for Windows. The analyzer itself can take many different types of files as input: the traditional Mach-O and FAT executables, .app files, zip files, Python scripts, Java archives, and web pages, as well as PDFs and other documents. While the file is running, the analyzer also simulates rudimentary human interaction with clicks and mouse movements in order to bypass the tests some malware use to see if they are being analyzed. The analyzer outputs several different kinds of data: function call traces, network captures, screenshots, and all created and modified files. This work also includes a static analysis Cuckoo module for Mach-O binary files. It extracts file structures, code library imports and exports, and signatures. This data can be used along with the analyzer results to create signatures for malware.

Walkup, Elizabeth↗

A Parametric Study of the Adjoint Flux Calculation for TDKENO

TDKENO is a time-dependent transport code designed to simulate reactor transients. One application is to study experiments performed at the Transient Reactor Test Facility (TREAT) at the Idaho National Laboratory (INL). TDKENO solves the time-dependent, three-dimensional Boltzmann transport equation with explicit representation of delayed neutrons. Instead of directly integrating this equation, the Improved Quasi Static (IQS) method is employed. This involves factoring the neutron flux into two components - a rapidly varying (in time) amplitude equation and a slowly varying shape equation. These are solved separately on different time scales. The shape equation is solved using the Monte Carlo transport code KENO, from Oak Ridge National Laboratory's SCALE code package. Using the Monte Carlo method to solve the shape equation is computationally intensive, but the operation is only performed when needed - namely when the reactor system is undergoing a significant change. The amplitude equation is solved deterministically. This operation contains the time dependence and can be calculated relatively quickly, resulting in computational savings. TDKENO begins by solving the adjoint form of the transport equation for use as a weighting function. It uses this adjoint flux for multiple aspects of the simulation, including the calculation of all of the point kinetics parameters . The flux shape is found by solving a modified form of the transport equation in 'forward' mode. This paper examines the effect the adjoint weighting function has on the solution. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Differential Many-Body Effects for Initial and Core Ionic States: Impact on XPS Spectra

In this paper, the contribution of many-body effects to the X-ray photoelectron spectroscopy, XPS, of an NO molecule is studied using wavefunction theory where the specific consequences of different many-body terms are examined and contrasted. It is shown that there is a differential importance of the many-body effects for the different configurations involved in the XPS. These are the ground, initial state configuration and final, N(1s) and O(1s) core hole ionic configurations. The consequences of the many-body effects are examined for the binding energies, BEs, to the two final state multiplets, triplet, and singlet, for each of the core ions and for the relative intensities of the XPS transitions to these multiplets. The many-body effects examined are those described as static effects that arise for individual terms that are important. The objective is to understand the chemical and physical origins that determine the importance of the correlation effects for the XPS, rather than to obtain very accurate predictions of the BEs. An important theoretical construct that is tested and justified is the equivalent core approximation where the core-ionized atom is replaced by the next higher element in the periodic table. This construct allows us to establish a correlation for the relative importance of the many-body effects in terms of effective charges of the different atoms. This is a correlation that has not been considered before and that we expect may have general relevance. The potential of the effects that we have identified for the XPS of NO to be relevant for the XPS of more complex, condensed phase systems is considered.

XPS, Static Correlation, Equivalent core model↗

Design and Testing of a Load Current Multiplier on Zebra Facility

The Load Current Multiplier concept (LCM) was validated for the first time on a high-voltage nanosecond pulse-power generator. The designed new device allowed to increase the load current from the nominal 0.8-0.9 MA up to 1.6 MA in static loads with constant inductance and up to 1.4 MA in a planar wire-array plasma loads. These results were achieved without modifying the generator energetic or architecture. LCM allowed both the load magnetic energy increase and the increase of soft X-ray radiation from z-pinch plasmas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Predictions for the drive capabilities of the RancheroS Flux Compression Generator into various load inductances using the Eulerian AMR Code Roxane

The Ranchero Magnetic Flux Compression Generator (FCG) has been used to create current pulses in the 10-­100 MA range for driving both “static” low inductance (0.5 nH) loads1 for generator demonstration purposes and high inductance (10-­20 nH) imploding liner loads2 for ultimate use in physics experiments at very high energy density. Simulations of the standard Ranchero generator have recently shown that it had a design issue that could lead to flux trapping in the generator, and a non-­ robust predictability in its use in high energy density experiments. A re-­examination of the design concept for the standard Ranchero generator, prompted by the possible appearance of an aneurism at the output glide plane, has led to a new generation of Ranchero generators designated the RancheroS (for swooped). This generator has removed the problematic output glide plane and replaced it with a region of constantly increasing diameter in the output end of the FCG cavity in which the armature is driven outward under the influence of an additional HE load not present in the original Ranchero. The resultant RancheroS generator, to be tested in LA43S-­L13, probably in early FY17, has a significantly increased initial inductance and may be able to drive a somewhat higher load inductance than the standard Ranchero. This report will use the Eulerian AMR code Roxane to study the ability of the new design to drive static loads, with a goal of providing a database corresponding to the load inductances for which the generator might be used and the anticipated peak currents such loads might produce in physics experiments. Such a database, combined with a simple analytic model of an ideal generator, where d(LI)/dt = 0, and supplemented by earlier estimates of losses in actual use of the standard Ranchero, scaled to estimate the increase in losses due to the longer current carrying perimeter in the RancheroS, can then be used to bound the expectations for the current drive one may apply to any load assembly in future experiments.

42 ENGINEERING↗