Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Additive Manufacturing of Thermoset Cellular Structures

Magnum Venus Products (MVP) and Oak Ridge National Laboratory (ORNL) set out to develop and commercialize a 3D printer depositing thermoset polymers with a build volume accommodating mid-scale applications capable of deposition rate exceeding 10 lb/hr with resolution of 3 mm or less. The objective of this work was to demonstrate the ability to efficiently print light weight cellular structures for application in load bearing structural applications, thereby transforming the mid to large scale additive technology. The project was organized around three main tasks: 1. Thermoset printer development, 2. Material and process parameter development and 3. Demonstration. The MVP-ORNL team successfully carried out the project by creating the first thermoset 3D printer of this size in the world and by using it to demonstrate the ability to print cellular structures. The team was awarded the Award for Composites Excellence at the 2018 CAMX conference for this development.

36 MATERIALS SCIENCE↗

Acoustic plate mode propagation and interaction with ultraviolet light in periodic AIN-on-sapphire structure

AlN overlay featuring periodic columnar structure fabricated by epitaxial lateral overgrowth technique leads to excitation of acoustic plate modes (APMs) not observed in overlays without such periodic structure. The measured velocities of acoustic plate modes propagating in AlN-on-sapphire structure were verified by numerical simulation. The APM velocity is strongly modulated by UV illumination at wavelengths from 240 to 365 nm, and the corresponding phase response is sensitive to both the UV power and the wavelength with maximum sensitivity of 3.0 ppm/({mu}W/cm{sup 2}) at 240 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inhibition of light emission in a 2.5D photonic structure

We analyse inhibition of emission in a 2.5D photonic structures made up of a photonic crystal (PhC) and Bragg mirrors using Finite Differences Time Domaine (FDTD) simulations. A comparison is made between an isolated PhC membrane and the same PhC suspended onto a Bragg mirror or sandwiched between 2 Bragg mirrors. Strong inhibition of the Purcell factor is observed in a broad spectral range, whatever the in-plane orientation and location of the emitting dipole. We analysed these results numerically and theoretically by simulating the experimentally observed lifetime of a collection of randomly distributed emitters, showing that their average emission rate is decreased by more than one decade, both for coupled or isolated emitters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Group III-nitride nanowire structures for photocatalytic hydrogen evolution under visible light irradiation

The performance of photochemical water splitting over the emerging nanostructured photocatalysts is often constrained by their surface electronic properties, which can lead to imbalance in redox reactions, reduced efficiency, and poor stability. We have investigated the impact of surface charge properties on the photocatalytic activity of InGaN nanowires. By optimizing the surface charge properties through controlled p-type dopant (Mg) incorporation, we have demonstrated an apparent quantum efficiency of ∼17.1% and ∼12.3% for InGaN nanowire arrays under visible light irradiation (400 nm–490 nm) in aqueous methanol and in the overall neutral-pH water splitting reaction, respectively.

36 MATERIALS SCIENCE↗

Light-induced electron pairing in a bilayer structure

We demonstrate the existence of doubly charged exciton states in strongly screened bilayers of transition metal dichalcogenide layers. These complexes are important because they are preformed electron pairs that can, in principle, undergo Bose–Einstein condensation, in which case they would also form a new type of superconductor, consisting of stable bosons with net charge. Our measurements include 1) continuous control of the doping density with both positive and negative carriers, showing the expected population dependencies on the free carrier density, and 2) measurement of the dependence on magnetic field, showing that this new bound state is a spin triplet. These results imply that it is promising to look for superconductivity in this system.

2D material↗

Impact of the MARATHON data on F 2⁢n⁡ /F 2⁢p and off-shell effects in light nuclei

The neutron structure function, F 2⁢n⁡ , has historically been extracted from measurements of the deuteron structure function, which is limited by our understanding of the nuclear effects on the bound proton and neutron. The MARATHON Collaboration recently extracted F 2⁢n⁡ from the comparison of 3 H and 3 He targets, where the nuclear effects are larger but nearly identical, yielding a precise extraction of F 2⁢n⁡ /F 2⁢p . Here, to ensure that this comparison is not biased by the specific model of nuclear effects used by MARATHON, we examine a range of models of the nuclear effects to obtain a more conservative, but more model-independent, extraction of F 2⁢n⁡ /F 2⁢p for comparison with deuteron extractions. Even with this approach, the results are precise enough to compare to deuteron extractions, providing new constraints on the nuclear effects in the deuteron and indicating the need for larger nuclear corrections than those included in most models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Small scale structure in the brightness of the zodiacal light - Ground-based observations

Ground-based observations of the evening zodiacal light are used to derive a table of zodiacal light brightnesses at spatial resolutions as small as 0.5 deg in differential ecliptic longitude and 1.0 deg in ecliptic latitude. Significant differences are found in the brightness distribution above and below the ecliptic plane. Attention is given to a feature found in the brightness at all ecliptic latitudes, between differential ecliptic longitudes 39 deg and 42 deg.

Misconi, Nebil Y.↗

Structural Design and Analysis of a Light-Weight Laminated Composite Heat Sink for Spaceflight PWBs

In order to reduce the overall weight in spaceborne electronic systems, a conventional metallic heat sink typically used for double-sided printed wiring boards was suggested to be replaced by light-weight and high-strength laminated composite materials. Through technology validation assurance (TVA) approach, it has been successfully demonstrated that using laminated composite heat sink can not only reduce the weight of the heat sink by nearly 50%, but also significantly lower the internal thermally-induced stresses that are largely responsible for potential delamination under cyclic temperature variations. With composite heat sink, both thermal and dynamic performance of the double-sided printed wiring board (PWB) exceeds that of its counterpart with metallic heat sink. Also included in this work is the original contribution to the understanding of creep behavior of the worst-case leadless chip carrier (LCC) surface mount solder joint. This was identified as the interconnection most susceptible to thermal fatigue damage in the PWB assembly.

Fan, Mark S.↗

Harnessing emergent multiple scattering resonances in a photonic glass structure for photoelectrochemical energy conversion

Light trapping nanostructures are often necessary to improve carrier collection yields in semiconductor photoelectrodes with intrinsically poor electron transport. Photonic crystal templates can generate tailorable light trapping via periodic and precise nanostructure, though this is not a scalable strategy for photoelectrochemical (PEC) applications. It is therefore critical to identify alternative mechanisms for light trapping that tolerate disorder. Light trapping in disordered media is generated by the diffusive transport caused by multiple scattering. In some cases, multiple scattering can generate resonances that resemble those observed in photonic crystals. While resonant multiple scattering is a disorder tolerant light trapping mechanism, it is unclear if the effect is sufficiently adaptable, or even useful, for PEC applications. Here, we describe a photonic omission glass, a nanostructure that can controllably induce resonances in multiple scattering transport. We characterized the emergence of these resonances after coating a disordered SiO 2 colloidal structure with a layer of TiO 2 , which functions both as dielectric contrast and as a light absorbing semiconductor. We show in finite element simulations and spectroscopic characterization that the resonant multiple scattering effect improves light trapping near the interface between the structure and the bulk electrolyte. This effect, coupled with the increased electrochemically active surface area, results in a hierarchically structured TiO 2 photoanode with orders of magnitude higher photocurrents compared to an equivalent planar photoanode for PEC reactions such as alkaline water oxidation. We show that controlling this resonant multiple scattering effect can be advantageous for improving PEC energy conversion in disordered photoelectrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light-Driven Polymeric Bimorph Actuators

Light-driven polymeric bimorph actuators are being developed as alternatives to prior electrically and optically driven actuators in advanced, highly miniaturized devices and systems exemplified by microelectromechanical systems (MEMS), micro-electro-optical-mechanical systems (MEOMS), and sensor and actuator arrays in smart structures. These light-driven polymeric bimorph actuators are intended to satisfy a need for actuators that (1) in comparison with the prior actuators, are simpler and less power-hungry; (2) can be driven by low-power visible or mid-infrared light delivered through conventional optic fibers; and (3) are suitable for integration with optical sensors and multiple actuators of the same or different type. The immediate predecessors of the present light-driven polymeric bimorph actuators are bimorph actuators that exploit a photorestrictive effect in lead lanthanum zirconate titanate (PLZT) ceramics. The disadvantages of the PLZT-based actuators are that (1) it is difficult to shape the PLZT ceramics, which are hard and brittle; (2) for actuation, it is necessary to use ultraviolet light (wavelengths < 380 nm), which must be generated by use of high-power, high-pressure arc lamps or lasers; (3) it is difficult to deliver sufficient ultraviolet light through conventional optical fibers because of significant losses in the fibers; (4) the response times of the PLZT actuators are of the order of several seconds unacceptably long for typical applications; and (5) the maximum mechanical displacements of the PLZT-based actuators are limited to those characterized by low strains beyond which PLZT ceramics disintegrate because of their brittleness. The basic element of a light-driven bimorph actuator of the present developmental type is a cantilever beam comprising two layers, at least one of which is a polymer that exhibits a photomechanical effect (see figure). The dominant mechanism of the photomechanical effect is a photothermal one: absorption of light energy causes heating, which, in turn, causes thermal expansion.

Adamovsky, Gregory↗