Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Properties of nano structured Ag-TiO{sub 2} composite coating on stainless steel using RF sputtering method

RF Sputtering system is one of the Physical Vapour Deposition (PVD) methods that have been widely used to produce hard coating. This technique is used to deposit thin layers of metallic substrates such as stainless steel (SS). From this process, a good adhesiveness and wear resistance coating can be produced for biomedical applications. In this study, RF sputtering method was used to deposit TiO{sub 2}-Ag composite coatings via various deposition parameters. The parameters are RF power of 350W, gas composition (Ar: O{sub 2}) 50:5 and deposition time at 1, 2, 4 and 6 hours. Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and Raman spectroscopy were used to characterize surface area of coated samples. The formation of nanocrystalline thin film and the surface morphology were examined using SEM. The crystallite size of TiO{sub 2}-Ag composite coatings were estimated between 20-60 nm based on XRD analysis using Scherer equation and SEM evaluation. The Raman and XRD results suggested that the structure of the TiO{sub 2}-Ag consist of anatase and rutile phases. It also showed that the intensity of anatase peaks increased after samples undergone annealing process at 500 Degree-Sign C.

36 MATERIALS SCIENCE↗

Wet chemical synthesis and characterization of AgGaSe{sub 2} nanoparticles

AgGaSe{sub 2} compound semiconductor nanoparticles were synthesized by wet chemical method using mercaptoacetic acid as a capping agent at room temperature. The synthesized powders belong to chalcopyrite structure confirmed by powder XRD. The surface morphology and crystalline size were observed by high resolution scanning electron microscope (HR-SEM). The stoichiometric composition of AgGaSe{sub 2} nanoparticles was confirmed by Energy dispersive X-ray (EDX) analysis. Different functional group vibrations of mercaptoacetic acid capped nanoparticles were studied using FT-IR spectrum. The absorbance and optical bandgap of the nanoparticles were determined using diffuse reflectance spectroscopy (DRS).

36 MATERIALS SCIENCE↗

Rectifying behaviour of spin coated pn hetero-junction

Rectifying pn hetero- junction is fabricated with an acceptor p-type organic semiconductor namely tetra- chloro dihydroxy tetra-iodo fluorescein (Rose Bengal (RB)) followed by an inorganic n-type ZnO semiconductor on indium tin oxide (ITO) substrate. The n-type ZnO films are formed by unintentional doping and doping with aluminium (Al) and yttrium (Y) donors. The surface morphology and the distribution of grains are observed from scanning electron microscopy (SEM) and atomic force microscopy (AFM). The current-voltage (I-V) characteristic of the rectifying diode is measured to characterize the junction properties. The I-V plots obtained from the hetero- junction with electric contact shows a diode characteristic different from that of an ideal behavior. The overall efficiency of the diode exhibits a greater dependency on the film crystallinity, carrier concentration, and reverse saturation current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On shock driven jetting of liquid from non-sinusoidal surfaces into a vacuum

Other work employed Richtmyer-Meshkov theory to describe the development of spikes and bubblesfrom shocked sinusoidal surfaces. Here, we discuss the effects of machining different two-dimensional shaped grooves in copper and examine the resulting flow of the material after being shocked into liquid on release. For these simulations, a high performance molecular dynamics code, SPaSM, was used with machined grooves of kh 0 = 1 and kh 0 = 1/8, where 2h 0 is the peak-to-valley height of the perturbation with wavelength λ, and k = 2π/λ. The surface morphologies studied include a Chevron, a Fly-Cut, a Square-Wave, and a Gaussian. Furthermore, we describe extensions to an existing ejecta source model that better captures the mass ejected from these surfaces. We also investigate the same profiles at length scales of order 1 cm for an idealized fluid equation of state using the FLASH continuum hydrodynamics code. Our findings indicate that the resulting mass can be scaled by the missing area of a sinusoidal curve with an effective wavelength, λeff , that has the same missing area. Finally, our extended ejecta mass formula works well for all the shapes considered and captures the corresponding time evolution and total mass.

36 MATERIALS SCIENCE↗

Evaluation of Thermal Control Coatings for Flexible Ceramic Thermal Protection Systems

This report summarizes the evaluation and testing of high emissivity protective coatings applied to flexible insulations for the Reusable Launch Vehicle technology program. Ceramic coatings were evaluated for their thermal properties, durability, and potential for reuse. One of the major goals was to determine the mechanism by which these coated blanket surfaces become brittle and try to modify the coatings to reduce or eliminate embrittlement. Coatings were prepared from colloidal silica with a small percentage of either SiC or SiB6 as the emissivity agent. These coatings are referred to as gray C-9 and protective ceramic coating (PCC), respectively. The colloidal solutions were either brushed or sprayed onto advanced flexible reusable surface insulation blankets. The blankets were instrumented with thermocouples and exposed to reentry heating conditions in the Ames Aeroheating Arc Jet Facility. Post-test samples were then characterized through impact testing, emissivity measurements, chemical analysis, and observation of changes in surface morphology. The results show that both coatings performed well in arc jet tests with backface temperatures slightly lower for the PCC coating than with gray C-9. Impact testing showed that the least extensive surface destruction was experienced on blankets with lower areal density coatings.

Kourtides, Demetrius↗

Microstructural investigations of light-emitting porous Si layers

The structural and morphological characteristics of visible-light-emitting porous Si layers produced by anodic and stain etching of single-crystal Si substrates are compared using transmission electron microscopy and atomic force microscopy (AFM). AFM of conventionally anodized, laterally anodized and stain-etched Si layers show that the layers have a fractal-type surface morphology. The anodized layers are rougher than the stain-etched films. At higher magnification 10 nm sized hillocks are visible on the surface. Transmission electron diffraction patterns indicate an amorphous structure with no evidence for the presence of crystalline Si in the near-surface regions of the porous Si layers.

George, T.↗

Structural and optical properties of ZnO thin films grown by rapid atmospheric mist chemical vapor technique

In this work, the effect of deposition time on the structural and optical properties of ZnO films deposited by Ultrasonic Spray Mist-CVD was studied aiming the application in perovskite solar cells, as holes blocking layer. Crystallinity, surface morphology and optical properties of the ZnO films were investigated by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), conventional and Photoluminescence (PL) spectroscopies, respectively. The XRD measurement proves the existence of the hexagonal wurtzite phase and a high degree of crystallinity with [001] preferential orientation. The SEM study shows that the films possess a compact structure. Smooth and homogenous surface was confirmed also by AFM. The obtained results indicate that ZnO films deposited by a simple, safe and cost-effective method present a great potential for application in perovskite solar cells.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Sol–gel method as a way of carbonyl iron powder surface modification for interaction improvement

This article presents a method for modification of carbonyl iron particles’ surface (CIP), (d{sub 50}=4–9 µm) by silica coatings obtained using the sol–gel method. Reaction parameters were determined to obtain dry magnetic powder with homogeneous silica coatings without further processing and without any by-product in the solid or liquid phase. This approach is new among the commonly used methods of silica coating of iron particles. No attempt has been made to cover a carbonyl iron surface by silica in a waste-free method, up to date. In the current work two different silica core/shell structures were made by the sol–gel process, based on different silica precursors: tetraethoxy-silane (TEOS) and tetramethoxy-silane (TMOS). The dependence between the synthesis procedure and thickness of silica shell covering carbonyl iron particles has been described. Surface morphology of the modified magnetic particles and the coating thickness were characterized with the use of scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Determination of the physicochemical structure of the obtained materials was performed by the energy-dispersive X-ray spectroscope (EDS), and the infrared technique (IR). The surface composition was analyzed using X-ray photoelectron spectroscopy (XPS). Additionally, distribution of particle size was measured using light microscopy. The new, efficient process of covering micro-size CIP with a nanometric silica layer was shown. Results of a performed analysis confirm the effectiveness of the presented method. - Highlights: • Proper covering CIP by sol–gel silica layer avoids agglomeration. • A new solid waste-free method of CIP coating is proposed. • Examination of the properties of modified CIP in depends on washing process. • Coatings on CIP particles doesn’t change the magnetic properties of particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Study to Investigate Cloud Feedback Processes and Evaluate GCM Cloud Variations Using Statistical Cloud Property Composites From ARM Data

The representation of clouds in Global Climate Models (GCMs) remains a major source of uncertainty in climate change simulations. Cloud climatologies have been widely used to either evaluate climate model cloud fields or examine, in combination with other data sets, climate-scale relationships between cloud properties and dynamical or microphysical parameters. Major cloud climatologies have been based either on satellite observations of cloud properties or on surface observers views of cloud type and amount. Such data sets provide either the top-down view of column-integrated cloud properties (satellites) or the bottom-up view of the cloud field morphology (surface observers). Both satellite-based and surface cloud climatologies have been successfully used to examine cloud properties, to support process studies, and to evaluate climate and weather models. However, they also present certain limitations, since the satellite cloud types are defined using radiative cloud boundaries and surface observations are based on cloud boundaries visible to human observers. As a result, these data sets do not resolve the vertical distribution of cloud layers, an issue that is important in calculating both the radiative and the hydrologic effects of the cloud field. Ground-based cloud radar observations, on the other hand, resolve with good accuracy the vertical distribution of cloud layers and could be used to produce cloud type climatologies with vertical layering information. However, these observations provide point measurements only and it is not immediately clear to what extent they are representative of larger regimes. There are different methods that can be applied to minimize this problem and to produce cloud layering climatologies useful for both cloud process and model evaluation studies. If a radar system is run continuously over a number of years, it eventually samples a large number of dynamical and microphysical regimes. If additional data sets are used to put the cloud layering information into the context of large-scale dynamical regimes, such information can be used to study interactions among cloud vertical distributions and dynamical and microphysical processes and to evaluate the ability of models to simulate those interactions. The U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) program has established several Climate Research Facilities (ACRF) that provide continuous, long-term observations of clouds and radiation. ARM, with its overall goal of improving the treatment of radiation and clouds in climate models has provided unique observing systems for accelerating progress on the representation of cloud processes. In this project, six and a half years (January 1998 to June 2004) of cloud observations collected at the Southern Great Plains (SGP) Oklahoma ACRF were used to produce a cloud-type climatology. The climatology provides cloud amounts for seven different cloud types as well as information on the detailed structure of multi-layer cloud occurrences. Furthermore, the European Centre for Medium-Range Weather Forecasts (ECMWF) model output was used to define the dynamic regimes present during the observations of the cloud conditions by the vertically pointing radars at the SGP ACRF. The cloud-type climatology and the ECMWF SGP data set were then analyzed to examine and map dynamical conditions that favor the creation of single-layer versus multi-layer cloud structures as well as dynamical conditions that favor the occurrence of drizzle in continental stratus clouds. In addition, output from the ECMWF weather model forecasts was analyzed with the objective to compare model and radar derived cloud type statistics, in order to identify the major model deficiencies in cloud vertical distribution and map their seasonal variations. The project included two primary goals. The first was to create a cloud type climatology over the Southern Great Planes site that will show how cloud vertical distribution varies with dynamic and thermodynamic regime and how these variations would affect cloud climate feedbacks. The second was to compare this climatology to clouds derived by a numerical model in order to identify the major model deficiencies in cloud vertical distribution and map their seasonal variations.

54 ENVIRONMENTAL SCIENCES↗

Observing Chemical and Morphological Changes in a Cu@TiO x Core@Shell Catalyst: Impact of Reversible Metal-Oxide Interactions on CO 2 Activation and Hydrogenation

A combination of several in-situ techniques (XRD, XAS, AP-XPS, E-TEM) was used to explore links between the structural and chemical properties of a Cu@TiO x catalyst under CO 2 hydrogenation conditions. The active phase of the catalyst involved an inverse oxide/metal configuration, but the initial core@shell motif was disrupted during the pre-treatment in H 2 . As a consequence of strong metal-support interactions, the titania shell cracked and Cu particles migrated from the core to on top of the oxide with the simultaneous formation of a Cu-Ti-O x phase. The generated Cu particles had a diameter of 20-40 nm and were decorated by small clusters of TiO x (< 5 nm in size). Results of in-situ XAS and XRD and images of E-TEM showed a very dynamic system, where the inverse oxide/metal configuration promoted the reactivity of the system towards CO 2 and H 2 . At room temperature, CO 2 oxidized the Cu nanoparticles (CO 2,gas → CO gas + O oxide ) inducing a redistribution of the TiO x clusters and big modifications in catalyst surface morphology. The generated oxide overlayer disappeared at elevated temperatures (> 180 °C) upon exposure to H 2 , producing a transient surface that was very active for the reverse water-gas shift reaction (CO 2 + H 2 → CO + H 2 O) but was not stable at 250 °C. When oxidation and reduction occurred at the same time, under a mixture of CO 2 and H 2 , the surface structure evolved toward a dynamic equilibrium that strongly depended on the temperature. Neither CO 2 nor H 2 can be considered as passive reactants. In the Cu@TiO x system, morphological changes were linked to variations in the composition of metal-oxide interfaces which were reversible with temperature or chemical environment and affected the catalytic activity of the system. Finally, the present study illustrates the dynamic nature of phenomena associated with the trapping and conversion of CO 2 .

36 MATERIALS SCIENCE↗

Enhanced field emission properties of tilted graphene nanoribbons on aggregated TiO{sub 2} nanotube arrays

Highlights: • Graphene nanoribbons (GNBs) slanted on aggregate TiO{sub 2} nanotube (A-TNTs) as field-emitters. • Turn-on electric field and field enhancement factor β are dependent on the substrate morphology. • Various quantities of GNRs are deposited on top of A-TNTs (GNRs/A-TNTs) with different morphologies. • With an increase of GNBs compositions, the specimens' turn-on electric field is reduced to 2.8 V/μm. • The field enhancement factor increased rapidly to about 1964 with the addition of GNRs. - Abstract: Graphene nanoribbons (GNRs) slanted on aggregate TiO{sub 2} nanotube arrays (A-TNTs) with various compositions as field-emitters are reported. The morphology, crystalline structure, and composition of the as-obtained specimens were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and Raman spectrometry. The dependence of the turn-on electric field and the field enhancement factor β on substrate morphology was studied. An increase of GNRs reduces the specimens’ turn-on electric field to 2.8 V/μm and the field enhancement factor increased rapidly to about 1964 with the addition of GNRs. Results show a strong dependence of the field emission on GNR composition aligned with the gradient on the top of the A-TNT substrate. Enhanced FE properties of the modified TNTs can be mainly attributed to their improved electrical properties and rougher surface morphology.

36 MATERIALS SCIENCE↗

Microstructural and Superconducting Radiofrequency Properties of Multilayer Sequentially Sputtered Nb 3 Sn films

Nb 3 Sn is considered as a potential candidate for superconducting radiofrequency cavities for particle acceleration due to its higher transition temperature of 18.3 K and higher superheating field of 400 mT. Nb 3 Sn films can be grown inside the surface of a Nb cavity by sequentially sputtering multiple layers of Nb and Sn thin films followed by annealing at 950 °C for 3 h. We report on the properties of Nb 3 Sn films grown on Nb substrates by magnetron sputtering. The films’ crystal structure, surface morphology, and composition were characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The films had a polycrystalline Nb 3 Sn structure with a fine-grain surface and an atomic Sn composition of ~23%. The RF surface resistance of the films was measured for different temperatures at 7.4 GHz to understand the feasibility of this method for the SRF application. The RF surface resistance of the films was 5 mΩ at 12 K, which is about 2 orders of magnitude higher than 60 μΩ previously measured in Nb 3 Sn films grown by Sn vapor diffusion. Finally, the sputtered film had a superconducting transition at 17.2 K, which is also lower than 17.9 K observed in Nb 3 Sn film prepared by vapor diffusion.

43 PARTICLE ACCELERATORS↗

Microtopographic evolution of lava flows at Cima volcanic field, Mojave Desert, California

Microtopographic profiles were measured and power spectra calculated for dated lava flow surfaces at Cima volcanic field in the eastern Mojave Desert of California in order to quantify changes in centimeter- to meter-scale roughness as a function of age. For lava flows younger than about 0.8 m.y., roughness over all spatial scales decreases with age, with meter-scale roughness decreasing slightly more than centimeter scales. Flows older than about 0.8 m.y. show a reversal of this trend, becoming as rough as young flows at these scales. Modeling indicates that eolian deposition can explain most of the change observed in the offset, or roughness amplitude, of power spectra of flow surface profiles up to 0.8 m.y. Other processes, such as rubbing and stone pavement development, appear to have a minor effect in this age range. Changes in power spectra of surfaces older than about 0.8 m.y. are consistent with roughening due to fluvial dissection. These results agree qualitatively with a process-response model that attributes systematic changes in flow surface morphology to cyclic changes in the rates of eolian, soil formation, and fluvial processes. Identification of active surficial processes and estimation of the extent of their effects, or stage of surficial evolution, through measurement of surface roughness will help put the correlation of surficial units on a quantitative basis. This may form the basis for the use of radar remote sensing data to help in regional correlations of surficial units.

Farr, Tom G.↗

Probing the Influence of Thermally Induced Structural Changes on the Microstructural Evolution in Shale using Multiscale X-ray Scattering Measurements

Various pathways to accelerate the recovery of hydrocarbons from unconventional subsurface environments have been proposed, including the use of high-temperature fluids. However, the influence of temperature on the structural and microstructural changes in complex subsurface materials characterized by compositional and morphological heterogeneity are not very well understood. In this study, in operando ultrasmall angle, small angle, and wide-angle X-ray scattering (USAXS/ SAXS/WAXS) measurements were performed to link the structural and morphological changes in shale when heated from 30 to 1150 °C. The structural changes observed from the wide-angle X-ray scattering measurements were complemented by the changes in the porosity, particle size, and surface morphology. Overall, we report the combined USAXS/SAXS measurements showed enhanced smoothness in the pore–solid interface on heating. The dehydroxylation of illite and calcination of calcium carbonate were noted prior to the formation of denser and sintered silicate and alumino-silicate phases such as Mg 2 SiO 4 (forsterite), Fe 0.3 Mg 0.7 (SiO 3 ) (enstatite), and Al 2.35 Si 0.64 O 4.82 (mullite).

54 ENVIRONMENTAL SCIENCES↗

Laser-metal interaction dynamics during additive manufacturing resolved by detection of thermally-induced electron emission

In situ monitoring is required to improve the understanding and increase the reliability of additive manufacturing methods such as laser powder bed fusion (LPBF). Current diagnostic methods for LPBF capture optical images, X-ray radiographs, or measure the emission of thermal or acoustic signals from the component. Herein, a methodology based on the thermal emission of electrons - thermionic emission - from the metal surface during LPBF is proposed which can resolve laser-material interaction dynamics. The high sensitivity of thermionic emission to surface temperature and surface morphology is revealed to enable precise determination of the transition between conduction and keyhole mode melting regimes. Increases in thermionic emission are correlated to laser scanning conditions that give rise to pore formation and regions where surface defects are pronounced. The information presented here is a critical step in furthering our understanding and validation of laser-based metal additive manufacturing.

36 MATERIALS SCIENCE↗

Effect of misfit strain and surface roughness on the tunable dielectric behavior of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films

The effect of substrate temperature on the crystallographic texture and surface morphology of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} deposited by rf magnetron sputtering on (111) oriented Pt (150 nm)/Ti (10 nm)/SiO{sub 2} (300 nm)/Si (100) substrates is reported. The onset of crystallinity is observed above 500 deg. C, beyond which all films are oriented along the (111) plane up to a temperature of 800 deg. C. Over this temperature range, the misfit strain and root mean square roughness (rms{sub roughness}) peak at 600 deg. C, decreasing beyond this peak value. The tunability of the dielectric constant at 100 kHz is highest (60% for a field strength of 300 kV/cm) at the lowest values of rms{sub roughness} and misfit strain and decreases as these values increase. It is also shown that the morphology of the Pt underlayers is strongly affected by the processing conditions. This in turn influences the tunable behavior of the BST films as much as the substrate temperature during growth and the consequent microstructural variations.

36 MATERIALS SCIENCE↗

Self-masking controlled by metallic seed layer during glass dry-etching for optically scattering surfaces

During reactive ion etching in a high density Ar/CF{sub 4} plasma, nonvolatile halogen compounds are generated on the glass surface and act as statistically distributed micromasks. As a consequence surface roughness occurs, which can be used as additional surface functionality in certain classes of applications, where defined optical scattering is desired. The glass etch process described in this contribution enables user-defined scattering characteristics. The deposition of a thin metallic layer of Cu on top of the samples before dry-etching provides an additional seed for the production of micromasks, resulting in higher reproducibility. By varying the etch parameters a multitude of different surface morphologies can be realized both on borosilicate glasses and on fused silica.

36 MATERIALS SCIENCE↗

Garnet melt viscosity, surface tension and drainage

Good surface morphology and layer uniformity of LPE-grown Bi YIG films are favored by fast melt removal after growth. Three flux modifying oxides: MoO3, V2O3, and WO3 are compared with respect to their effect on viscosity, surface tension and melt drainage. All three oxides increased the viscosities of Bi-garnet melts, but the viscosities and drainage times of V2O3 and MoO3 modified melts were smaller than those of WO3 modified melts. The liquid-gas surface tension was found to be temperature independent. The drainage process was strongly temperature dependent, 40 to 60 kcal/mol, whereas the viscosities of melts had activation energies of 11 to 16 kcal/mol. Contact angles of 16 + or - 2 deg were measured on frozen melt drops.

Luther, L. C.↗