Search NASA⌕ Search

SEARCH · Search NASA

Results for “synthesis (scalable processing)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Gas cell for in situ soft X-ray transmission-absorption spectroscopy of materials

A simple gas cell design, constructed primarily from commercially available components, enables in situ soft X-ray transmission-absorption spectroscopy of materials in contact with gas at ambient temperature. The cell has a minimum X-ray path length of 1 mm and can hold gas pressures up to ~300 Torr, and could support higher pressures with simple modifications. The design enables cycling between vacuum and gas environments without interrupting the X-ray beam, and can be fully sealed to allow for measurements of air-sensitive samples. The cell can attach to the downstream port of any appropriate synchrotron beamline, and offers a robust and versatile method for in situ measurements of certain materials. The construction and operation of the cell are discussed, as well as sample preparation and proper spectral analysis, illustrated by examples of spectral measurements. Potential areas for improvement and modification for specialized applications are also mentioned.

47 OTHER INSTRUMENTATION↗
DOE OSTI2015

Ensemble Sampling vs. Time Sampling in Molecular Dynamics Simulations of Thermal Conductivity

In this report we compare time sampling and ensemble averaging as two different methods available for phase space sampling. For the comparison, we calculate thermal conductivities of solid argon and silicon structures, using equilibrium molecular dynamics. We introduce two different schemes for the ensemble averaging approach, and show that both can reduce the total simulation time as compared to time averaging. It is also found that velocity rescaling is an efficient mechanism for phase space exploration. Although our methodology is tested using classical molecular dynamics, the ensemble generation approaches may find their greatest utility in computationally expensive simulations such as first principles molecular dynamics. For such simulations, where each time step is costly, time sampling can require long simulation times because each time step must be evaluated sequentially and therefore phase space averaging is achieved through sequential operations. On the other hand, with ensemble averaging, phase space sampling can be achieved through parallel operations, since each ensemble is independent. For this reason, particularly when using massively parallel architectures, ensemble sampling can result in much shorter simulation times and exhibits similar overall computational effort.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2015

Experimental study of the proposed super-thermal-conductor: BAs

Recent calculations predict a super-thermal-conductivity of ~2000 Wm -1 K -1 , comparable to that of diamond, in cubic boron arsenide (BAs) crystals, which may offer inexpensive insulators with super-thermal-conductivity for microelectronic device applications. We have synthesized and characterized here single crystals of BAs with a zinc blende cubic structure and lattice parameters of a = 4.7830(7) Å. A relatively high thermal conductivity of ~200 Wm -1 K -1 is obtained, close to those of best non-carbon crystal insulators, such as SiC, although still an order of magnitude smaller than the value predicted. Based on our XPS, X-ray single crystal diffraction, and Raman scattering results, steps to achieve the predicted super-thermal conductivity in BAs are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Transport properties of cubic crystalline Ge 2 Sb 2 Te 5 : a potential low-temperature thermoelectric material.

Ge 2 Sb 2 Te 5 (GST) has been widely used as a popular phase change material. In this study, we show that it exhibits high Seebeck coe cients 200 - 300 μV/K in its cubic crystalline phase (c-GST) at remarkably high p-type doping levels of 1 10 19 - 6 10 19 cm -3 at room temperature. More importantly, at low temperature (T = 200 K), the Seebeck coe cient was found to exceed 200 μV/K for a doping range 1 10 19 - 3.5 10 19 cm -3 . Given that the lattice thermal conductivity in this phase has already been measured to be extremely low ( 0.7 W/m-K at 300 K), our results suggest the possibility of using c-GST as a low-temperature thermoelectric material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Non-diffusive thermal transport in GaAs at micron length scales

In this study, we use a transient thermal grating technique in reflection geometry to measure the effective thermal diffusivity in GaAs as a function of heat transfer distance at three temperatures. Utilizing heterodyne detection, we isolate the “amplitude” grating contribution of the transient grating signal, which encodes the thermal transport dynamics. As the thermal grating period decreases, and thus the heat-transfer distance, we observe a reduction in the effective thermal diffusivity, indicating a departure from diffusive behavior. Non-diffusive behavior is observed at room temperature, as well as low temperature (180 K) and high temperature (425 K). At the shortest thermal grating period measured corresponding to a heat transfer distance of approximately 1 μm, the effective diffusivity drops to a value roughly 50% of the bulk thermal diffusivity. These measurements show the utility of the reflection transient thermal grating technique to measure thermal transport properties of opaque materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Monte Carlo study of non-diffusive relaxation of a transient thermal grating in thin membranes

In this paper, the impact of boundary scattering on non-diffusive thermal relaxation of a transient grating in thin membranes is rigorously analyzed using the multidimensional phonon Boltzmann equation. The gray Boltzmann simulation results indicate that approximating models derived from previously reported one-dimensional relaxation model and Fuchs-Sondheimer model fail to describe the thermal relaxation of membranes with thickness comparable with phonon mean free path. Effective thermal conductivities from spectral Boltzmann simulations free of any fitting parameters are shown to agree reasonably well with experimental results. These findings are important for improving our fundamental understanding of non-diffusive thermal transport in membranes and other nanostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Optical and electronic properties of semiconducting Sn{sub 2}S{sub 3}

We report the electronic and optical properties of Sn{sub 2}S{sub 3} as obtained from first principles calculations with the modified Becke-Johnson potential. The electronic structure shows that Sn occurs in both divalent and tetravalent forms. The fundamental band gap of 0.82 eV is indirect. The direct gap is 0.97 eV, but the onset of strong optical absorption is much higher at ∼1.75 eV. This is as a consequence of the Sn{sup 2+} s and Sn{sup 4+} s characters of the valence and conduction band extrema, respectively. We also find strong and different anisotropies for conduction in p- and n-type Sn{sub 2}S{sub 3}. This should be taken into account in device structures in order to obtain efficient charge collection. The thermopowers are reasonably high for both p- and n-type materials. p-type Sn{sub 2}S{sub 3} shows complex corrugated isosurface sections, while the n-type material shows multiple band extrema.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Determination of bimetallic architectures in nanometer-scale catalysts by combining molecular dynamics simulations with x-ray absorption spectroscopy

In this study, we present an approach for the determination of an atomic structure of small bimetallic nanoparticles by combining extended X-ray absorption fine structure spectroscopy and classical molecular dynamics simulations based on the Sutton-Chen potential. The proposed approach is illustrated in the example of PdAu nanoparticles with ca 100 atoms and narrow size and compositional distributions. Using a direct modeling approach and no adjustable parameters, we were able to reproduce the size and shape of nanoparticles as well as the intra-particle distributions of atoms and metal mixing ratios and to explore the influence of these parameters on the local structure and dynamics in nanoparticles.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2017

Assessment of two hybrid van der Waals density functionals for covalent and non-covalent binding of molecules

Two hybrid van der Waals density functionals (vdW-DFs) are developed using 25% Fock exchange with (i) the consistent-exchange vdW-DF-cx functional [K. Berland and P. Hyldgaard, Phys. Rev. B 89, 035412 (2014)] and (ii) with the vdW-DF2 functional [K. Lee et al., Phys. Rev. B 82, 081101 (2010)]. The ability to describe covalent and non-covalent binding properties of molecules is assessed. For properties related to covalent binding, atomization energies (G2-1 set), molecular reaction energies (G2RC set), and ionization energies (G21IP set) are benchmarked against experimental reference values. We find that hybrid-vdW-DF-cx yields results that are rather similar to those of the standard non-empirical hybrid PBE0 [C. Adamo and V. Barone, J. Chem. Phys. 110, 6158 (1999)], with mean average deviations (MADs) of 4.9 and 5.0 kcal/mol for the G2-1 set, respectively. In this comparison, experimental reference values are used, back corrected by wavefunction-based quantum-chemistry calculations of zero-point energies. Hybrid vdW-DF2 follows somewhat different trends, showing on average significantly larger deviations from the reference energies, with a MAD of 14.5 kcal/mol for the G2-1 set. Non-covalent binding properties of molecules are assessed using the S22 benchmark set of non-covalently bonded dimers and the X40 set of dimers of small halogenated molecules, using wavefunction-based quantum chemistry results as references. For the S22 set, hybrid-vdW-DF-cx performs better than standard vdW-DF-cx for the mostly hydrogen-bonded systems, with MAD dropping from 0.6 to 0.3 kcal/mol, but worse for purely dispersion-bonded systems, with MAD increasing from 0.2 to 0.6 kcal/mol. Hybrid-vdW-DF2 offers a slight improvement over standard vdW-DF2. Similar trends are found for the X40 set, with hybrid-vdW-DF-cx performing particularly well for binding energies involving the strongly polar hydrogen halides, but poorly for systems with tiny binding energies. Our study of the X40 set reveals the potential of mixing Fock exchange with vdW-DF, but also highlights shortcomings of the hybrids constructed here. In conclusion, the solid performance of hybrid-vdW-DF-cx for covalent-bonded systems, as well as the strengths and issues uncovered for non-covalently bonded systems, makes this study a good starting point for developing even more accurate hybrid vdW-DFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Improving the thermoelectric performance in Mg 3+ x Sb 1.5 Bi 0.49 Te 0.01 by reducing excess Mg

Here, the thermoelectric performance of Mg 3+x Sb 1.5 Bi 0.49 Te 0.01 was improved by reducing the amount of excess Mg (x = 0.01-0.2). A 20% reduction in effective lattice thermal conductivity at 600 K was observed by decreasing the nominal x from 0.2 to 0.01 in Mg 3+x Sb 1.5 Bi 0.49 Te 0.01 , leading to a 20% improvement in the figure-of-merit zT . Since materials with different amounts of Mg have similar electronic properties, the enhancement is attributed primarily to the reduction in thermal conductivity. Lastly, it is known that excess Mg is required to make n-type Mg 3+x Sb 1.5 Bi 0.49 Te 0.01 ; however, too much excess Mg in the material increases the thermal conductivity and is therefore detrimental for the overall thermoelectric performance of the material.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Bifurcation of avoided crossing at an exceptional point in the dispersion of sound and light in locally resonant media

The avoided crossing behavior in the interaction of propagating sound or light waves with resonant inclusions is analyzed using a simple model of an acoustic medium containing damped mass-spring oscillators, which is shown to be equivalent to the Lorentz oscillator model in the elementary dispersion theory in optics. Two classes of experimental situations dictating the choice in the analysis of the dispersion relation are identified. If the wavevector is regarded as the independent variable and frequency as a complex function of the wavevector, then the avoided crossing bifurcates at an exceptional point at a certain value of the parameter γβ -1/2 , where γ and β characterize the oscillator damping and interaction strength, respectively. This behavior is not observed if the wavevector is regarded as a complex function of frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Temperature-dependent conformations of exciton-coupled Cy3 dimers in double-stranded DNA

Understanding the properties of electronically interacting molecular chromophores, which involve internally coupled electronic-vibrational motions, is important to the spectroscopy of many biologically relevant systems. In this paper, we apply linear absorption, circular dichroism, and two-dimensional fluorescence spectroscopy to study the polarized collective excitations of excitonically coupled cyanine dimers (Cy3) 2 that are rigidly positioned within the opposing sugar-phosphate backbones of the double-stranded region of a double-stranded (ds)–single-stranded (ss) DNA fork construct. We show that the exciton-coupling strength of the (Cy3) 2 -DNA construct can be systematically varied with temperature below the ds–ss DNA denaturation transition. We interpret spectroscopic measurements in terms of the Holstein vibronic dimer model, from which we obtain information about the local conformation of the (Cy3) 2 dimer, as well as the degree of static disorder experienced by the Cy3 monomer and the (Cy3) 2 dimer probe locally within their respective DNA duplex environments. The properties of the (Cy3) 2 -DNA construct we determine suggest that it may be employed as a useful model system to test fundamental concepts of protein-DNA interactions and the role of electronic-vibrational coherence in electronic energy migration within exciton-coupled bio-molecular arrays.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Phonon relaxation time reconstruction from transient thermal grating experiments and comparison with density functional theory predictions

Phonon relaxation time and free path distributions are reconstructed from experimental measurements on a two-dimensional transient thermal grating and compared with density functional theory (DFT) results for silicon. The reconstruction is performed using the inverse problem formulation of Forghani et al. [Phys. Rev. B 94, 155439 (2016)]. The discrepancies observed between reconstructed and DFT results are analyzed in terms of the ability of each set of data to reproduce the experimental temperature relaxation profiles; the reconstructed data are found to predict temperature profiles in closer agreement with the experimental data than the DFT results, possibly due to discrepancies between the actual material and the idealized model studied in the DFT calculations. The reconstructed phonon properties accurately predict temperature relaxation profiles at grating length scales smaller than those spanned by the experimental data. Finally, this is a very important feature since in a variety of experimental setups, including the one providing the data in the present study, measurements are not available at all scales spanned by the material free paths.

42 ENGINEERING↗
DOE OSTI2019

Divalent doping-induced thermoelectric power factor increase in p-type Bi 2 Te 3 via electronic structure tuning

We use first-principles calculations to reveal the effects of divalent Pb, Ca, and Sn doping of Bi 2 Te 3 on the band structure and transport properties, including the Seebeck coefficient, α, and the reduced power factor, α 2 σ/τ, where σ is the electrical conductivity and τ is the effective relaxation time. Pb and Ca additions exhibit up to 60%–75% higher peak α 2 σ/τ than that of intrinsic Bi 2 Te 3 with Bi antisite defects. Pb occupancy and Ca occupancy of Bi sites increase σ/τ by activating high-degeneracy low-effective-mass bands near the valence band edge, unlike Bi antisite occupancy of Te sites that eliminates near-edge valence states in intrinsic Bi 2 Te 3 . Neither Pb doping nor subatomic-percent Ca doping increases α significantly, due to band averaging. Higher Ca levels increase α and diminish σ, due to the emergence of a corrugated band structure underpinned by high-effective-mass bands, attributable to Ca–Te bond ionicity. Sn doping results in a distortion of the bands with a higher density of states that may be characterized as a resonant state but decreases α 2 σ by up to 30% due to increases in the charge carrier effective mass and decreases in both spin–orbit coupling and valence band quasidegeneracy. These results, and thermal conductivity calculations for nanostructured Bi 2 Te 3 , suggest that Pb or Ca doping can enhance the thermoelectric figure of merit ZT to values up to ZT ~ 1.7, based on an experimentally determined τ. Our findings suggest that divalent doping can be attractive for realizing large ZT enhancements in pnictogen chalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Toward high-energy-density, high-efficiency, and moderate-temperature chip-scale thermophotovoltaics

The challenging problem of ultra-high-energy-density, high-efficiency, and small-scale portable power generation is addressed here using a distinctive thermophotovoltaic energy conversion mechanism and chip-based system design, which we name the microthermophotovoltaic (μTPV) generator. The approach is predicted to be capable of up to 32% efficient heat-to-electricity conversion within a millimeter-scale form factor. Although considerable technological barriers need to be overcome to reach full performance, we have performed a robust experimental demonstration that validates the theoretical framework and the key system components. Even with a much-simplified μTPV system design with theoretical efficiency prediction of 2.7%, we experimentally demonstrate 2.5% efficiency. The μTPV experimental system that was built and tested comprises a silicon propane microcombustor, an integrated high-temperature photonic crystal selective thermal emitter, four 0.55-eV GaInAsSb thermophotovoltaic diodes, and an ultra-high-efficiency maximum power-point tracking power electronics converter. The system was demonstrated to operate up to 800 °C (silicon microcombustor temperature) with an input thermal power of 13.7 W, generating 344 mW of electric power over a 1-cm 2 area.

14 SOLAR ENERGY↗
DOE OSTI2013

High thermoelectric performance by resonant dopant indium in nanostructured SnTe

From an environmental perspective, lead-free SnTe would be preferable for solid-state waste heat recovery if its thermoelectric figure-of-merit could be brought close to that of the lead-containing chalcogenides. We studied the thermoelectric properties of nanostructured SnTe with different dopants, and found indium-doped SnTe showed extraordinarily large Seebeck coefficients that cannot be explained properly by the conventional two-valence band model. We attributed this enhancement of Seebeck coefficients to resonant levels created by the indium impurities inside the valence band, supported by the first-principles simulations. This, together with the lower thermal conductivity resulting from the decreased grain size by ball milling and hot pressing, improved both the peak and average nondimensional figure-of-merit (ZT) significantly. A peak ZT of ~1.1 was obtained in 0.25 atom % In-doped SnTe at about 873 K.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2013

Enabling enhanced emission and low-threshold lasing of organic molecules using special Fano resonances of macroscopic photonic crystals

The nature of light interaction with matter can be dramatically altered in optical cavities, often inducing nonclassical behavior. In solid-state systems, excitons need to be spatially incorporated within nanostructured cavities to achieve such behavior. Although fascinating phenomena have been observed with inorganic nanostructures, the incorporation of organic molecules into the typically inorganic cavity is more challenging. We present a unique optofluidic platform comprising organic molecules in solution suspended on a photonic crystal surface, which supports macroscopic Fano resonances and allows strong and tunable interactions with the molecules anywhere along the surface. We develop a theoretical framework of this system and present a rigorous comparison with experimental measurements, showing dramatic spectral and angular enhancement of emission. We then demonstrate that these enhancement mechanisms enable lasing of only a 100-nm thin layer of diluted solution of organic molecules with substantially reduced threshold intensity, which has important implications for organic light-emitting devices and molecular sensing.

74 ATOMIC AND MOLECULAR PHYSICS↗