Search NASA⌕ Search

SEARCH · Search NASA

Results for “variational methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Combined electron beam imaging and ab initio modeling of T{sub 1} precipitates in Al-Li-Cu alloys

Among the many considerable challenges faced in developing a rational basis for advanced alloy design, establishing accurate atomistic models is one of the most fundamental. Here we demonstrate how advanced imaging techniques in a double-aberration-corrected transmission electron microscope, combined with ab initio modeling, have been used to determine the atomic structure of embedded 1 nm thick T{sub 1} precipitates in precipitation-hardened Al-Li-Cu aerospace alloys. The results provide an accurate determination of the controversial T{sub 1} structure, and demonstrate how next-generation techniques permit the characterization of embedded nanostructures in alloys and other nanostructured materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of CH{sub 2} content and network defects on the elastic properties of organosilicate glasses

Organosilicate glasses (OSGs) are used as low-k intermetal dielectrics for advanced integrated circuits. In this application, the material must fulfill two conflicting requirements: It has to have low density to reduce the dielectric constant while being sufficiently mechanically stable to withstand thermomechanical and other stresses during subsequent steps of integrated circuit manufacture. Recent experimental advances in improving the mechanical and electrical properties of these materials have not yet been systematically studied theoretically at the ab initio level due to the large model sizes necessary to realistically describe amorphous materials. In this paper we employ the density-functional-based tight-binding method to achieve an accurate description of OSG properties at different compositions. We analyze the influence of composition and local network defects on the density and bulk modulus of nonporous OSG. We find that the dependence of density and that of mechanical stiffness on chemical composition are of different natures. This difference is traced to a transition between mechanisms of elastic deformation in silica glass and in silicon hydrocarbide, which is also the reason for the two materials' different sensitivities to network defects.

36 MATERIALS SCIENCE↗

Oxidation of stepped Pt(111) studied by x-ray photoelectron spectroscopy and density functional theory

In this comparative density functional theory and x-ray photoelectron spectroscopy study on the interaction of oxygen with stepped Pt(111) surfaces, we show that both the initial adsorption and oxidation occur at the steps rather than terraces. An equivalent behavior was observed for the oxide formation at higher chemical potentials, where, after the formation of a one-dimensional PtO{sub 2}-type oxide at the steps, similar oxide chains form on the (111) terraces, indicating the initial stages of bulk oxide formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio study of Hg-Hg and E112-E112 van der Waals interactions

The ground electronic state of the eka-mercury dimer (E112{sub 2}) was studied within the model of generalized relativistic effective core potentials. A combined procedure based on describing correlation effects by the scalar relativistic coupled-cluster method and on taking into account spin-dependent interactions by means of density-functional theory was used in the calculations. A high accuracy of this approach was confirmed by the results of similar calculations for the mercury dimer. It was found that the bond length is nearly 0.4 A shorter in E112{sub 2} than in Hg{sub 2} and that the dissociation energy of the former is approximately twice as high as that of the latter dimer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Syntheses and crystal structures of RE{sub 3}MnSn{sub 5-x} (RE=Tm, Lu) with 3D Mn-Sn framework

Four new isostructural rare earth manganese stannides, namely RE{sub 3}MnSn{sub 5-x} (x=0.16(6), 0.29(1) for RE=Tm, x=0.05(8), 0.21(3) for RE=Lu), have been obtained by reacting the mixture of corresponding pure elements at high temperature. Single-crystal X-ray diffraction studies revealed that they crystallized in the orthorhombic space group Pnma (No. 62) with cell parameters of a=18.384(9)-18.495(6) A, b=6.003(3)-6.062(2) A, c=14.898(8)-14.976(4) A, V=1644.3(14)-1679.0(9) A{sup 3} and Z=8. Their structures belong to the Hf{sub 3}Cr{sub 2}Si{sub 4} type and feature a 3D framework composed of 1D [Mn{sub 2}Sn{sub 7}] chains interconnected by [Sn{sub 3}] double chains via Sn-Sn bonds, forming 1D large channels based on [Mn{sub 4}Sn{sub 16}] 20-membered rings along the b-axis, which are occupied by the rare earth atoms. Electronic structure calculations based on density functional theory (DFT) for idealized 'RE{sub 3}MnSn{sub 5}' model indicate that these compounds are metallic, which are in accordance with the results from temperature-dependent resistivity measurements. - Graphical abstract: The new isostructural rare earth manganese stannides, namely RE{sub 3}MnSn{sub 5-x} (RE=Tm, Lu), have been synthesized by reacting the mixture of the corresponding pure elements and structurally characterized.

36 MATERIALS SCIENCE↗

Large-Scale Electron Correlation Calculations: Rank-Reduced Full Configuration Interaction

Here, we present the rank-reduced full configuration interaction (RR-FCI) method, a variational approach for the calculation of extremely large full configuration interaction (FCI) wave functions. In this report, we show that RR-FCI can provide ground state singlet and triplet energies within kcal/mol accuracy of full CI (FCI) with computational effort scaling as the square root of the number of determinants in the CI space (compared to conventional FCI methods which scale linearly with the number of determinants). Fast graphical processing unit (GPU) accelerated projected σ = Hc matrix–vector product formation enables calculations with configuration spaces as large as 30 electrons in 30 orbitals, corresponding to an FCI calculation with over 2.4 × 10 16 configurations. We apply this method in the context of complete active space configuration interaction calculations to acenes with 2–5 aromatic rings, comparing absolute energies against FCI when possible and singlet/triplet excitation energies against both density matrix renormalization group (DMRG) and experimental results. The dissociation of molecular nitrogen was also examined using both FCI and RR-FCI. In each case, we found that RR-FCI provides a low cost alternative to FCI, with particular advantages when relative energies are desired.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of the resonance-enhanced multiphoton ionization spectra of pyrrole and 2,5-dimethylpyrrole: Building toward an understanding of the electronic structure and photochemistry of porphyrins

The photophysical properties of porphyrins have relevance for their use as light-activated drugs in cancer treatment and sensitizers in solid-state solar cells. However, the appearance of their UV-visible spectra is usually explained inadequately by qualitative molecular-orbital theories. We intend to gain a better insight into the intense absorption bands, and excited-state dynamics, that make porphyrins appropriate for both of these applications by gradually building toward an understanding of the macrocyclic structure, starting with studies of smaller pyrrolic subunits. We have recorded the (1+1) and (2+1) resonance-enhanced multiphoton ionization (REMPI) spectra of pyrrole and 2,5-dimethylpyrrole between 25 600 cm{sup -1} (390 nm) and 48 500 cm{sup -1} (206 nm). We did not observe a (1+1) REMPI signal through the optically bright {sup 1}B{sub 2} ({pi}{pi}*) and {sup 1}A{sub 1} ({pi}{pi}*) states in pyrrole due to ultrafast deactivation via conical intersections with the dissociative {sup 1}A{sub 2} ({pi}{sigma}*) and {sup 1}B{sub 1} ({pi}{sigma}{sup *}) states. However, we did observe (2+1) REMPI through Rydberg states with a dominant feature at 27 432 cm{sup -1} (two-photon energy, 54 864 cm{sup -1}) assigned to a 3d(leftarrow){pi} transition. In contrast, 2,5-dimethylpyrrole has a broad and structured (1+1) REMPI spectrum between 36 000 and 42 500 cm{sup -1} as a result of vibronic transitions to the {sup 1}B{sub 2} ({pi}{pi}*) state, and it does not show the 3d(leftarrow){pi} Rydberg transition via (2+1) REMPI. We have complemented the experimental studies by a theoretical treatment of the excited states of both molecules using time-dependent density functional theory (TD-DFT) and accounted for the contrasting features in the spectra. TD-DFT modeled the photochemical activity of both the optically dark {sup 1}{pi}{sigma}* states (dissociative) and optically bright {sup 1}{pi}{pi}* states well, predicting the barrierless deactivation of the {sup 1}B{sub 2} ({pi}{pi}*) state of pyrrole and the bound minimum of the {sup 1}B{sub 2} ({pi}{pi}*) state in 2,5-dimethylpyrrole. However, the quantitative agreement between vibronic transition energies and the excited-state frequencies calculated by TD-DFT was hampered by inaccurate modeling of Rydberg orbital mixing with the valence states, caused by the lack of an asymptotic correction to the exchange-correlation functionals used.

36 MATERIALS SCIENCE↗

Photoionization of Endohedral Atoms: Collective, Reflective and Collateral Emissions

The photoionization properties of a fullerene-confined atom differ dramatically from that of an isolated atom. In the low energy region, where the fullerene plasmons are active, the electrons of the confined atom emerge through a collective channel carrying a significant chunk of plasmon with it. The photoelectron angular distribution of the confined atom however shows far lesser impact of the effect. At higher energies, the interference between two single-electron ionization channels, one directly from the atom and another reflected off the fullerene cage, producuces oscillatory cross sections. But for the outermost atomic level, which transfers some electrons to the cage, oscillations are further modulated by the collateral emission from the part of the atomic charge density transferred to the cage. These various modes of emissions are studied for the photoionization of Ar endohedrally confined in C{sub 60}.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of Cu doping on Hole Mobility in CdTe

High quality CdTe thin films grown by laser deposition technique and heavily doped with Cu have recently been reported to have resistivity and hole mobility comparable to those of bulk single crystals. To explain the experimental results we have calculated the effect of Cu on the band structure and phonon spectrum of CdTe using the density functional theory (DFT) and the linearized augmented plane wave (LAPW) method. We found that the introduction of a high density of Cu can lead to a reduction in the hole-LO phonon scattering. In addition, Cu doping can remove Cd vacancies in CdTe and thereby enhance the hole mobility in CdTe.

36 MATERIALS SCIENCE↗

Low O{sub 2} dissociation barrier on Pt(111) due to adsorbate-adsorbate interactions

O{sub 2} dissociation on Pt(111) has been followed at low and saturation coverage using temperature-programmed x-ray photoelectron spectroscopy and simulated with mean-field kinetic modeling, yielding dissociation (E{sub a}) and desorption (E{sub d}) barriers of 0.32 and 0.36 eV, respectively. Density functional theory calculations show that E{sub a} is strongly influenced by the O-O interatomic potential in the atomic final state: of the supercells considered, that which maximizes attractive third-nearest-neighbor interactions in the atomic final state yields both the lowest computed dissociation barrier (0.24 eV) and the best agreement with experiment. It is proposed that the effect of adsorbate-adsorbate interactions must be considered when modeling catalytic processes involving dissociative steps.

36 MATERIALS SCIENCE↗

Density functional theory study of Fe{sub 3}Ga

First-principles scalar relativistic calculations in supercells of 16 atoms are used to represent disordered B2 ordering of Fe{sub 3}Ga in order to observe the effect of Ga-Ga pairs on the electronic structure of this alloy. From a comparison with pure bcc Fe it is observed that the energy position and occupation of e{sub g} and t{sub 2g} states are largely affected by the Ga-Ga pairs and strengthened intraplane interactions takes place. The results show that a larger hybridization of the conduction band is in the source of the magnetostriction enhancement experimentally observed in Galfenol.

36 MATERIALS SCIENCE↗

Electronic structure of cation-codoped TiO{sub 2} for visible-light photocatalyst applications from hybrid density functional theory calculations

The electronic structures of Mg/Ca- and/or Mo/W- (mono- and co-) doped anatase TiO{sub 2} have been investigated via generalized Kohn-Sham theory with the Heyd-Scuseria-Ernzerhof hybrid functional for exchange-correlation (J. Heyd et al., [J. Chem. Phys. 118, 8207 (2003)], J. Heyd et al., [J. Chem. Phys. 124, 219906 (2006)], and J. Paier et al., [J. Chem. Phys. 125, 249901 (2006)]), in the context of density functional theory. Gap narrowing is small for monodoping, which also creates impuritiy bands in the ''forbidden gap,'' either as acceptor or donor states, limiting possible utility as visible-light photocatalysts. However, codoping of Mg/Ca and Mo/W not only induces appreciable gap narrowing, but also serves to passivate the impurity bands, which can harvest visible-light to a greater extent. Considering ionic radii, Mg and Mo should constitute the best cation-pair.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hybrid density functional theory description of N- and C-doping of NiO

The large intrinsic bandgap of NiO hinders its potential application as a photocatalyst under visible-light irradiation. In this study, we have performed first-principles screened exchange hybrid density functional theory with the HSE06 functional calculations of N- and C-doped NiO to investigate the effect of doping on the electronic structure of NiO. C-doping at an oxygen site induces gap states due to the dopant, the positions of which suggest that the top of the valence band is made up primarily of C 2p-derived states with some Ni 3d contributions, and the lowest-energy empty state is in the middle of the gap. This leads to an effective bandgap of 1.7 eV, which is of potential interest for photocatalytic applications. N-doping induces comparatively little dopant-Ni 3d interactions, but results in similar positions of dopant-induced states, i.e., the top of the valence band is made up of dopant 2p states and the lowest unoccupied state is the empty gap state derived from the dopant, leading to bandgap narrowing. With the hybrid density functional theory (DFT) results available, we discuss issues with the DFT corrected for on-site Coulomb description of these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimation of beryllium ground state energy by Monte Carlo simulation

Quantum Monte Carlo method represent a powerful and broadly applicable computational tool for finding very accurate solution of the stationary Schrödinger equation for atoms, molecules, solids and a variety of model systems. Using variational Monte Carlo method we have calculated the ground state energy of the Beryllium atom. Our calculation are based on using a modified four parameters trial wave function which leads to good result comparing with the few parameters trial wave functions presented before. Based on random Numbers we can generate a large sample of electron locations to estimate the ground state energy of Beryllium. Our calculation gives good estimation for the ground state energy of the Beryllium atom comparing with the corresponding exact data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear time-dependent density-functional-theory study of ionization and harmonic generation in CO{sub 2} by ultrashort intense laser pulses: Orientational effects

Time-dependent density-functional-theory (TDDFT) methods are used to calculate the orientational dependence of ionization and molecular high-order harmonic generation (MHOHG) in the CO{sub 2} molecule as a function of laser intensity I{sub 0{>=}}10{sup 14} W/cm{sup 2} for few-cycle 800 nm laser pulses. A time-series analysis is used to confirm the recollision model in MHOHG for different density potentials. It is found that at intensities I{sub 0}>3.5x10{sup 14} W/cm{sup 2}, lower highest occupied molecular orbitals (HOMO's) contribute significantly to ionization and to the MHOHG process. This is due to the symmetry of these orbitals. Even though such lower orbitals have higher ionization potentials (IP), ionization and MHOHG processes occur when orbital densities are maximum with laser polarization direction.

74 ATOMIC AND MOLECULAR PHYSICS↗

Structural changes in quasi-one-dimensional many-electron systems: From linear to zigzag and beyond

Many-electron systems confined to a quasi-one-dimensional geometry by a cylindrical distribution of positive charge have been investigated by density functional computations in the unrestricted local spin density approximation. Our investigations have been focused on the low-density regime, in which electrons are localized. The results reveal a wide variety of different charge and spin configurations, including linear and zig-zag chains, single- and double-strand helices, and twisted chains of dimers. The spin-spin coupling turns from weakly antiferromagnetic at relatively high density, to weakly ferromagnetic at the lowest densities considered in our computations. The stability of linear chains of localized charge has been investigated by analyzing the radial dependence of the self-consistent potential and by computing the dispersion relation of low-energy harmonic excitations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nuclear collective excitations in a two-phase coexistence region

The relation between collective modes and phase transitions in nuclear matter is examined. The dispersion relations for the low-lying excitations in a linear approach are evaluated within a Landau-Fermi liquid scheme by assuming coexisting phases in thermodynamical equilibrium. Temperature and isospin composition are used as relevant parameters. The in-medium nuclear interaction is provided by a recently proposed density functional model. The low density liquid-gas phase transition is taken as a typical situation for examination. We found significative modifications in the energy spectrum, within a certain range of temperatures and isospin asymmetry, due to the separation of matter into independent phases. The influence of the electromagnetic interaction over the dispersion relation of these collective excitations is also examined.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation of the silicon concentration effect on Si-doped anatase TiO{sub 2} by first-principles calculation

A first-principles calculation based on the density functional theory (DFT) was used to investigate the energetic and electronic properties of Si-doped anatase TiO{sub 2} with various silicon concentrations. The theoretical calculations showed that with Si-doping the valence band and conduction band of TiO{sub 2} became hybrid ones with large dispersion, which could benefit the mobility of the photo-generated carriers. This result is in agreement with the experimental reports. At lower doping levels, the band gap of Si-doped anatase TiO{sub 2} decreases about 0.2 eV. With the increase of silicon concentration, the band gap increases gradually and larger formation energies are required during the synthesis of Si-doped TiO{sub 2}. - Graphical abstract: The total density of states (TDOS) of Ti{sub 1-x}Si{sub x}O{sub 2} with (a) x=0, (b) x=0.03125, (c) x=0.0625, (d) x=0.09375 and (e) x=0.125. Highlights: > The effect of Si content on the electronic structure in Si-doped anatase TiO{sub 2}. > Large dispersion of DOS in VB and CB benefits the mobility of the carriers. > Low Si-doping level reduces the band gap of Si-doped anatase TiO{sub 2} with 0.2 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗