Search NASA⌕ Search

SEARCH · Search NASA

Results for “vortex structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Aerodynamic challenges of ALT

The approach and landing test (ALT) of the Space Shuttle Orbiter presented a number of unique challenges in the area of aerodynamics. The purpose of the ALT program was both to confirm the use of the Boeing 747 as a transport vehicle for ferrying the Orbiter across the country and to demonstrate the flight characteristics of the Orbiter in its approach and landing phase. Concerns for structural fatigue and performance dictated a tailcone be attached to the Orbiter for ferry and for the initial landing tests. The Orbiter with a tailcone attached presented additional challenges to the normal aft sting concept of wind tunnel testing. The landing tests required that the Orbiter be separated from the 747 at approximately 20,000 feet using aerodynamic forces to fly the vehicles apart. The concept required a complex test program to determine the relative effects of the two vehicles on each other. Also of concern, and tested, was the vortex wake created by the 747 and the means for the Orbiter to avoid it following separation.

Hooks, I.↗

The development of advanced technology blades for tilt-rotor aircraft

The paper discusses the development and ground testing of blades for the XV-15 tilt-rotor demonstrator aircraft. This work was performed under contract NAS2-11250 with NASA Ames Research Center. These blades, known as the Advanced Technology Blades (ATB), replace the rectangular, steel blades which were part of the XV-15 original design. The materials used in the primary structure of the ATB are fiberglass and high strain graphite epoxy laminates. This facilitates the use of 43 deg of nonlinear twist, a nonuniform tapered planform and thin airfoils required for aerodynamic efficiency. Instrumentation life is extended by encapsulating gages and wiring in the composite structure. Tip shells and cuff fairings are removable to provide access to tip weights and retention hardware; they are also replaceable with alternate research configurations. Extensive laboratory testing has validated predicted strength characteristics. Hover testing has demonstrated performance significantly superior to that predicted by contemporary methodology. Key elements of the test rig used for rotor performance measurement were developed as an ancillary part of the present program. The performance testing included measurement of near- and far-field noise. Induced inflow velocity distributions were also determined and photographs of tip vortex condensation trails were taken. These are providing guidance for modifications to hover peformance codes.

Alexander, Harold R.↗

Unsteady Navier-Stokes computations on a wing-body configuration in ramp motions

Unsteady Navier-Stokes computations are conducted for transonic flows over a wing-body configuration undergoing prescribed ramp motions. The ramp motion from 0 to 15 deg includes angles of attack where vortex breakdown is observed experimentally. The vortex breakdown is found to be delayed until after the ramp motion ends. The dynamic effects on the loads are also demonstrated. The moment coefficient is found to be sensitive to the effect of the virtual mass of the fluid. To verify the numerical results, a grid refinement study has been performed for both steady and unsteady flow conditions, by using up to approximately one million grid points. The results show that the coarse grid can give integrated quantities reasonably well, whereas the finer grids give a more detailed flow structure. Comparisons are also made with available steady-state experimental data.

Obayashi, Shigeru↗

Continuous wavelet analysis of coherent structures

We perform an analysis of planar cuts through three dimensional turbulent fields (planar channel flow and mixing layer) using the 2D continuous wavelet transform. We propose two new diagnostics: (1) a measure of intermittency I(r, vector x), which is the ratio of local energy and average energy at a given scale r; and (2) a local Reynolds number, defined on the local velocity contribution at a given scale, computed from the wavelet transform of the three velocity components, the scale of the transform, and molecular viscosity; this gives a representation of the local non-linearity of the flow viewed in both space and scale. We find, for the analyzed flows, strong small-scale intermittency located in the ejection regions for the channel flow and in the vortex core of the mixing layer.

Farge, M.↗

The Evolution of the Stratopause during the 2006 Major Warming: Satellite Data and Assimilated Meteorological Analyses

Microwave Limb Sounder and Sounding of the Atmosphere with Broadband Emission Radiometry data provide the first opportunity to characterize the four-dimensional stratopause evolution throughout the life-cycle of a major stratospheric sudden warming (SSW). The polar stratopause, usually higher than that at midlatitudes, dropped by 30 km and warmed during development of a major "wave 1" SSW in January 2006, with accompanying mesospheric cooling. When the polar vortex broke down, the stratopause cooled and became ill-defined, with a nearly isothermal stratosphere. After the polar vortex started to recover in the upper stratosphere/lower mesosphere (USLM), a cool stratopause reformed above 75 km, then dropped and warmed; both the mesosphere above and the stratosphere below cooled at this time. The polar stratopause remained separated from that at midlatitudes across the core of the polar night jet. In the early stages of the SSW, the strongly tilted (westward with increasing altitude) polar vortex extended into the mesosphere, and enclosed a secondary temperature maximum extending westward and slightly equatorward from the highest altitude part of the polar stratopause over the cool stratopause near the vortex edge. The temperature evolution in the USLM resulted in strongly enhanced radiative cooling in the mesosphere during the recovery from the SSW, but significantly reduced radiative cooling in the upper stratosphere. Assimilated meteorological analyses from the European Centre for Medium-Range weather Forecasts (ECMWF) and Goddard Earth Observing System Version 5.0.1 (GEOS-5), which are not constrained by data at polar stratopause altitudes and have model tops near 80 km, could not capture the secondary temperature maximum or the high stratopause after the SSW; they also misrepresent polar temperature structure during and after the stratopause breakdown, leading to large biases in their radiative heating rates. ECMWF analyses represent the stratospheric temperature structure more accurately, suggesting a better representation of vertical motion; GEOS-5 analyses more faithfully describe stratopause level wind and wave amplitudes. The high-quality satellite temperature data used here provide the first daily, global, multiannual data sets suitable for assessing and, eventually, improving representation of the USLM in models and assimilation systems.

Manney, Gloria L.↗

Mesoscale characteristics of monsoonal convection and associated stratiform precipitation

Observations undertaken on 12 January 1990 at Darwin (Australia) are used to document the structure of a monsoonal rainband in a low convective available potential energy low-shear tropical environment. Dual-Doppler radar analyses are employed to investigate the structure and kinematics of the convective and stratiform regions. A system with the characteristics of a relatively short-lived squall line in which warm rain processes play a significant role in the production of precipitation is evident. Planetary boundary layer cold-pool production is important in the organization and motion of the system. A trailing stratiform region is evident with a mean updraft-downdraft circulation, but is composed of in situ decaying convective cells. A storm-relative mesoscale cyclonic circulation is also observed within the stratiform cloud. This vortex was maintained by thermodynamically induced midlevel convergence, convectively generated storm-scale circulations, and their interaction with the background monsoon flow.

Keenan, Thomas D.↗

Calculation of Wing Bending Moments and Tail Loads Resulting from the Jettison of Wing Tips During a Symmetrical Pull-Up

A preliminary analytical investigation was made to determine the feasibility of the basic idea of controlled failure points as safety valves for the primary airplane structure. The present analysis considers the possibilities of the breakable wing tip which, in failing as a weak link, would relieve the bending moments on the wing structure. The analysis was carried out by computing the time histories of the wing and stabilizer angle of attack in a 10g pull-up for an XF8F airplane with tips fixed and comparing the results with those for the same maneuver, that is, elevator motion but with tips jettisoned at 8g. The calculations indicate that the increased stability accompanying the loss of the wing tips reduces the bending moment an additional amount above that which would be expected from the initial loss in lift and the inboard shift in load. The vortex shed when the tips are lost may induce a transient load requiring that the tail be made stronger than otherwise.

Boshar, John↗

Direct CFD Predictions of Low Frequency Sounds Generated by a Helicopter Main Rotor

The use of CFD to directly predict helicopter main rotor noise is shown to be quite promising as an alternative mean for low frequency source noise evaluation. Results using existing state-of-the-art grid structures and finite-difference schemes demonstrated that small perturbation pressures, associated with acoustics radiation, can be extracted with some degree of fidelity. Accuracy of the predictions are demonstrated via comparing to predictions from conventional acoustic analogy-based models, and with measurements obtained from wind tunnel and flight tests for the MD-902 helicopter at several operating conditions. Findings show that the direct CFD approach is quite successfully in yielding low frequency results due to thickness and steady loading noise mechanisms. Mid-to-high frequency contents, due to blade-vortex interactions, are not predicted due to CFD modeling and grid constraints.

Sim, Ben W.↗

On the Goertler vortex instability mechanism at hypersonic speeds

The linear instability of the hypersonic boundary layer on a curved wall is considered. As a starting point real-gas effects are ignored and the viscosity of the fluid is taken to be related to the temperature either by Chapman's Law or by Sutherland's Law. It is shown that the flow is susceptible to Goertler vortices. If Chapman's Law is used the vortices are trapped in the logarithmically thin adjustment layer in which the temperature of the basic flow changes rapidly to its free stream value and the nonuniqueness of the neutral stability curve associated with incompressible Goertler vortices is shown to disappear at high Mach numbers if the appropriate 'fast' streamwise dependence of the instability is built into the disturbance flow structure. If, on the other hand, Sutherland's Law is used, the vortices are found to spread into an O(1) region and the concept of a unique neutral stability curve is not tenable because of the nonparallel effects. For both laws the leading order terms in the expansions of the Goertler number are independent of the wave number and are due to the curvature of the basic state.

Hall, P.↗

Warm core ring dynamics derived from satellite imagery

A reinterpretation of the life history of warm core ring 82-b is constructed from drifter trajectories, hydrographic profiles, and satellite-derived sea surface temperature fields. An analysis of the observations strongly suggests this ring is fundamentally a dipole structure for much of its existence. The dipole has unequal strength vortices, with the cyclone being the weaker component. Quantification of the dipole indicates the anticyclonic is oval shaped and rotates at approximately 7.7 deg per day, while the cyclone revolves around the anticyclone at about 14.5 deg per day, yielding an orbit period of approximately 25 days for the cyclone. The elusive part of the dipole explanation is in interpreting its surface signature as a function of time, as the cyclone appears to disappear when in proximity to the steep continental slope. Vortex modeling suggests that when the weaker cyclonic eddy is placed close to a boundary, the cyclone is drawn into a filament as it is advected through the gap between the anticyclone and the boundary. This means the cyclone is either in a filamentation state or undergoing the straining associated with filamentation approximately three fourths of this time, which is in complete agreement with the satellite imagery. In addition, the 82-B dipole configuration is sufficiently robust to survive continuous interaction with the continental slope and the onset of a Gulf Stream interaction. Although only warm core ring 82-B is analyzed in detail (and found to be a vortex pair), dipole configurations are found in the warm core ring 81-F time series as well.

Hooker, Stanford B.↗

Overview of the NASA Glenn Flux Reconstruction Based High-Order Unstructured Grid Code

A computational fluid dynamics code based on the flux reconstruction (FR) method is currently being developed at NASA Glenn Research Center to ultimately provide a large- eddy simulation capability that is both accurate and efficient for complex aeropropulsion flows. The FR approach offers a simple and efficient method that is easy to implement and accurate to an arbitrary order on common grid cell geometries. The governing compressible Navier-Stokes equations are discretized in time using various explicit Runge-Kutta schemes, with the default being the 3-stage/3rd-order strong stability preserving scheme. The code is written in modern Fortran (i.e., Fortran 2008) and parallelization is attained through MPI for execution on distributed-memory high-performance computing systems. An h- refinement study of the isentropic Euler vortex problem is able to empirically demonstrate the capability of the FR method to achieve super-accuracy for inviscid flows. Additionally, the code is applied to the Taylor-Green vortex problem, performing numerous implicit large-eddy simulations across a range of grid resolutions and solution orders. The solution found by a pseudo-spectral code is commonly used as a reference solution to this problem, and the FR code is able to reproduce this solution using approximately the same grid resolution. Finally, an examination of the code's performance demonstrates good parallel scaling, as well as an implementation of the FR method with a computational cost/degree- of-freedom/time-step that is essentially independent of the solution order of accuracy for structured geometries.

High-Order Methods↗

Flight investigation of the response of a helicopter to the trailing vortex of a fixed-wing aircraft

A flight investigation was conducted to quantitatively determine the response of a medium-weight helicopter to the trailing-vortex system of a fixed-wing aircraft. Flight tests and analytical tools were both utilized in the investigation. The flight tests involved an extensively instrumented UH-1H helicopter and a C-54 aircraft. Penetrations of the vortex system by the UH-1H were made at the following nominal conditions: the C-54 flew at 5500 feet altitude at a nominal gross weight of 58,000 pounds and an indicated airspeed of 115 knots in a cruise configuration. The UH-1H, nominally 7200 pounds gross weight, flew at 60 knots indicated airspeed during the penetrations at separation distances of 6.64 nautical miles to 0.42 nautical mile between aircraft. In general, the data analyzed for the above tests indicated that no unsafe penetration occurred. Further, penetrating vehicle attitude changes and structural loads were nominal. In addition, the response of the helicopter did not change appreciably with decreased separation distance.

Mantay, W. R.↗

The dynamic character of the wake of an axisymmetric body at an angle of attack

The flow around a hemisphere-cylinder was studied at angles of attack alpha = 0-90 deg. The work was carried out in two wind tunnels, using hot wire anemometers and seven-hole probes at Reynolds number of 2.7 x 10 exp 4. Five distinct states of vortex unsteadiness were detected. For angles of attack less than 14 deg, the flow is rather stable. For alpha between 15 and 23 deg, meandering occurs at a reduced frequency of 0.065. For alpha between 24 and 32 deg, three frequencies were recorded at 0.11, 0.21, and 0.31. At even higher angles of attack, alpha between 33 and 41 deg, two frequencies were seen at 0.11 and 0.19. The onset of alternate shedding is at alpha = 42 deg, above which, alternate shedding occurred at 0.065. However, above 55 deg, shedding occurred at 0.15. Asymmetric wake structures over the hemisphere-cylinder were also investigated. It was found that asymmetric structures too are not steady but engage in periodic organized motions.

Hoang, N. T.↗

Managing Flap Vortices via Separation Control

A pilot study was conducted on a flapped semi-span model to investigate the concept and viability of near-wake vortex management by means of boundary layer separation control. Passive control was achieved using a simple fairing and active control was achieved via zero mass-flux blowing slots. Vortex sheet strength, estimated by integrating surface pressures, was used to predict vortex characteristics based on inviscid rollup relations and vortices trailing the flaps were mapped using a seven-hole probe. Separation control was found to have a marked effect on vortex location, strength, tangential velocity, axial velocity and size over a wide range of angles of attack and control conditions. In general, the vortex trends were well predicted by the inviscid rollup relations. Manipulation of the separated flow near the flap edges exerted significant control over either outboard or inboard edge vortices while producing small lift and moment excursions. Unsteady surface pressures indicated that dynamic separation and attachment control can be exploited to perturb vortices at wavelengths shorter than a typical wingspan. In summary, separation control has the potential for application to time-independent or time-dependent wake alleviation schemes, where the latter can be deployed to minimize adverse effects on ride-quality and dynamic structural loading.

Greenblatt, David↗

Thermal structure and dynamics of the Jovian atmosphere. I - The Great Red Spot

Temperatures and thermal winds over the Great Red Spot (GRS) are derived from Voyager IRIS data for atmospheric pressures between 3 and 500 mbar. A cold tropopause implies a decrease in anticyclonic vorticity with height above 500 mbar through the lower stratosphere. Observations at 5 microns indicate that there is little emission from the GRS itself, although there is enhanced emission from a ring around it. The behavior of the tropopause and 5 micron temperatures are considered to be results of circulation which rises within the GRS and subsides in the area around it. Results are discussed in the context of several theoretical models of the GRS, and latent heat release as an energy source is considered. Dynamical scalings based on an axisymmetric frictionally controlled vortex indicate that the large-scale dynamics of the GRS are linear, as opposed to those of a tropical cyclone which are nonlinear.

Flasar, F. M.↗

Investigation of vortex development on a pitching slender body of revolution

A computational study of the unsteady flow about a pitching 3.5 caliber tangent ogive forebody is presented. The flow is simulated using the full 3D unsteady Navier-Stokes equations and a time-accurate implicit algorithm. Comparison to available experimental data for a steady 20 deg case is presented as validation. Effects of grid resolution and a comparison of solutions using full Navier-Stokes and the thin-layer approximation are included. The forebody is simulated in a 'pitch-up to 20 deg and hold' maneuver, and two different pitch axis locations are used in the study. Examination of the unsteady vorticity field for the pitch-up cases reveals the formation of strong shear layers as the body decelerates, and their roll-up into vortical structures in a process similar to that observed in airfoil dynamic stall. Pronounced vortex/surface interactions are seen which produce multiple secondary separation regions, ejection of vorticity from the surface, and embedded regions of high suction.

Stanek, M. J.↗

Spreading Characteristics and Thrust of Jets from Asymmetric Nozzles

The spreading characteristics of jets from several asymmetric nozzles are studied in comparison to those of an axisymmetric jet, over the Mach number (M(sub J)) range of 0.3 to 1.96. The effect of tabs in two cases, the axisymmetric nozzle fitted with four tabs and a rectangular nozzle fitted with two large tabs, is also included in the comparison. Compared to the axisymmetric jet, the asymmetric jets spread only slightly faster at subsonic conditions, while at supersonic conditions, when screech occurs, they spread much faster. Screech profoundly increases the spreading of all jets. The effect varies in the different stages of screech, and the corresponding unsteady flowfield characteristics are documented via phase-averaged measurement of the fluctuating total pressure. An organization and intensification of the azimuthal vortical structures under the screeching condition is believed to be responsible for the increased spreading. Curiously, the jet from a 'lobed mixer' nozzle spreads much less at supersonic conditions compared to all other cases. This is due to the absence of screech with this nozzle. Jet spreading for the two tab configurations, on the other hand, is significantly more than any of the no-tab cases. This is true in the subsonic regime, as well as in the supersonic regime in spite of the fact that screech is essentially eliminated by the tabs. The dynamics of the streamwise vortex pairs produced by the tabs cause the most efficient jet spreading thus far observed in the study.

Zaman, K. B. M. Q.↗

The promise of advanced technology for future air transports

Progress in all weather 4-D navigation and wake vortex attenuation research is discussed and the concept of time based metering of aircraft is recommended for increased emphasis. The far term advances in aircraft efficiency were shown to be skin friction reduction and advanced configuration types. The promise of very large aircraft, possibly all wing aircraft is discussed, as is an advanced concept for an aerial relay transportation system. Very significant technological developments were identified that can improve supersonic transport performance and reduce noise. The hypersonic transport was proposed as the ultimate step in air transportation in the atmosphere. Progress in the key technology areas of propulsion and structures was reviewed. Finally, the impact of alternate fuels on future air transports was considered and shown not to be a growth constraint.

Bower, R. E.↗