Search NASA⌕ Search

SEARCH · Search NASA

Results for “ATOMIC MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

The first measurements of soft x-ray flux from ignition scale Hohlraums at the National Ignition Facility using DANTE (invited)

The first 96 and 192 beam vacuum Hohlraum target experiments have been fielded at the National Ignition Facility demonstrating radiation temperatures up to 340 eV and fluxes of 20 TW/sr as viewed by DANTE representing an {approx}20 times flux increase over NOVA/Omega scale Hohlraums. The vacuum Hohlraums were irradiated with 2 ns square laser pulses with energies between 150 and 635 kJ. They produced nearly Planckian spectra with about 30{+-}10% more flux than predicted by the preshot radiation hydrodynamic simulations. To validate these results, careful verification of all component calibrations, cable deconvolution, and software analysis routines has been conducted. In addition, a half Hohlraum experiment was conducted using a single 2 ns long axial quad with an irradiance of {approx}2x10{sup 15} W/cm{sup 2} for comparison with NIF Early Light experiments completed in 2004. We have also completed a conversion efficiency test using a 128-beam nearly uniformly illuminated gold sphere with intensities kept low (at 1x10{sup 14} W/cm{sup 2} over 5 ns) to avoid sensitivity to modeling uncertainties for nonlocal heat conduction and nonlinear absorption mechanisms, to compare with similar intensity, 3 ns OMEGA sphere results. The 2004 and 2009 NIF half-Hohlraums agreed to 10% in flux, but more importantly, the 2006 OMEGA Au Sphere, the 2009 NIF Au sphere, and the calculated Au conversion efficiency agree to {+-}5% in flux, which is estimated to be the absolute calibration accuracy of the DANTEs. Hence we conclude that the 30{+-}10% higher than expected radiation fluxes from the 96 and 192 beam vacuum Hohlraums are attributable to differences in physics of the larger Hohlraums.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Quantum chaos in the nuclear collective model. II. Peres lattices

This is a continuation of our paper [Phys. Rev. E 79, 046202 (2009)] devoted to signatures of quantum chaos in the geometric collective model of atomic nuclei. We apply the method by Peres to study ordered and disordered patterns in quantum spectra drawn as lattices in the plane of energy vs average of a chosen observable. Good qualitative agreement with standard measures of chaos is manifested. The method provides an efficient tool for studying structural changes in eigenstates across quantum spectra of general systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MULTI-KEV X-RAY YIELDS FROM HIGH-Z GAS TARGETS FIELDED AT OMEGA

The authors report on modeling of x-ray yield from gas-filled targets shot at the OMEGA laser facility. The OMEGA targets were 1.8 mm long, 1.95 mm in diameter Be cans filled with either a 50:50 Ar:Xe mixture, pure Ar, pure Kr or pure Xe at {approx} 1 atm. The OMEGA experiments heated the gas with 20 kJ of 3{omega} ({approx} 350 nm) laser energy delivered in a 1 ns square pulse. the emitted x-ray flux was monitored with the x-ray diode based DANTE instruments in the sub-keV range. Two-dimensional x-ray images (for energies 3-5 keV) of the targets were recorded with gated x-ray detectors. The x-ray spectra were recorded with the HENWAY crystal spectrometer at OMEGA. Predictions are 2D r-z cylindrical with DCA NLTE atomic physics. Models generally: (1) underpredict the Xe L-shell yields; (2) overpredict the Ar K-shell yields; (3) correctly predict the Xe thermal yields; and (4) greatly underpredict the Ar thermal yields. However, there are spreads within the data, e.g. the DMX Ar K-shell yields are correctly predicted. The predicted thermal yields show strong angular dependence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomically thin interlayer phase from first principles enables defect-free incommensurate SnO2/CdTe interface

Advancing optoelectronic and emerging technologies increasingly requires control and design of interfaces between dissimilar materials. However, incommensurate interfaces are notoriously defective and rarely benefit from first-principles predictions, because no explicit atomic-structure models exist. Here, we adopt a bulk crystal structure prediction method to the interface geometry and apply it to SnO2/CdTe heterojunctions without and with the addition of CdCl2, a ubiquitous and beneficial, but abstruse processing step in CdTe photovoltaics. Whereas the direct SnO2/CdTe interface is highly defective, we discover a unique two-dimensional CdCl2 interphase, unrelated to the respective bulk structure. It facilitates a seamless transition from the rutile to zincblende lattices and removes defect-states from the interface bandgap. Implementing the predicted interface electronic structure in device simulations, we demonstrate the theoretical feasibility of bufferless oxide-CdTe heterojunction solar cells approaching the Shockley–Queisser limit. Our results highlight the broader potential of designing atomically thin interlayers to enable defect-free incommensurate interfaces.

14 SOLAR ENERGY↗

Assessing the Role of the Support in Acetic Acid Hydrodeoxygenation Selectivity on Pt/TiO2

To produce drop-in quality biofuels following the thermochemical conversion of biomass via catalytic fast pyrolysis (CFP), hydrodeoxygenation (HDO) reactions can be performed to remove excess oxygen and create a more stable bio-oil product. HDO reactions involve co-feeding the CFP vapor-phase product and H2 gas over bi-functional catalysts, such as noble-metal catalysts supported on reducible metal oxides (e.g., Pt/TiO2). Recent model-compound studies, focusing on important classes of species in the CFP vapor mixture, have sought to determine the role of the various Pt/TiO2 actives sites (i.e., Pt-metal, TiO2-support, Pt-TiO2-interfacial sites) in producing the observed desired deoxygenation and undesired decarboxylation/decarbonylation products. One important class of compounds in the CFP vapor-phase product is carboxylic acids (e.g., acetic acid). Prior experimental work on acetic acid HDO (AA-HDO) found that Pt/C and Pt/TiO2 catalysts favored the formation of undesired C-C and desired C-O bond-dissociation products; however, the fundamental surface chemistry driving this shift in selectivity has not been established. This presentation employs atomic-scale modeling to determine, through comparisons of adsorption and reaction energetics, how Pt-metal, Pt-TiO2-interface, and interfacial-vacancy sites catalyze the competing reaction pathways for AA-HDO. Our analysis indicates that hydroxyl vacancies at the Pt-TiO2 interface are critical for lowering barriers for C-O bond-cleavage steps, such that they become favorable/competitive with respect to C-C bond-dissociation steps.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

Theoretical modeling and experimental observations of the atomic layer deposition of SrO using a cyclopentadienyl Sr precursor

First-principle calculations are used to model the adsorption and hydration of strontium bis(cyclopentadienyl) [Sr(Cp){sub 2}] on TiO{sub 2}-terminated strontium titanate, SrTiO{sub 3} (STO), for the deposition of strontium oxide, SrO, by atomic layer deposition (ALD). The Sr(Cp){sub 2} precursor is shown to adsorb on the TiO{sub 2}-terminated surface, with the Sr atom assuming essentially the bulk position in STO. The C–Sr bonds are weaker than in the free molecule, with a Ti atom at the surface bonding to one of the C atoms in the cyclopentadienyl rings. The surface does not need to be hydrogenated for precursor adsorption. The calculations are compared with experimental observations for a related Sr cyclopentadienyl precursor, strontium bis(triisopropylcyclopentadienyl) [Sr({sup i}Pr{sub 3}Cp){sub 2}], adsorbed on TiO{sub 2}-terminated STO. High-resolution x-ray photoelectron spectroscopy and low-energy ion scattering spectroscopy show adsorption of the Sr precursor on the TiO{sub 2}-terminated STO after a single precursor dose. This study suggests that ALD growth from the strontium precursors featuring cyclopentadienyl ligands, such as Sr(Cp){sub 2}, may initiate film growth on non-hydroxylated surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Space Plasma Ion Processing of the Lunar Soil: Modeling of Radiation-Damaged Rim Widths on Lunar Grains

Chemically and microstructurally complex altered rims around grains in the finest size fraction (<20 micron) of the lunar regolith are the result of multi-stage processes involving both solar ion radiation damage and nanoscale deposition of impact or sputter-derived vapors. The formation of the rims is an important part of the space weathering process, and is closely linked to key changes in optical reflectance and other bulk properties of the lunar surface. Recent application of field-emission scanning transmission electron microscope techniques, including energy dispersive X-ray spectral imaging, is making it easier to unravel the "nano-stratigraphy" of grain rims, and to delineate the portions of rims that represent Radiation-Amorphized (RA) host grain from overlying amorphous material that represents vapor/sputter deposits. For the portion of rims formed by host grain amorphization (henceforth called RA rims), we have been investigating the feasibility of using Monte Carlo-type ion-atom collision models, combined with experimental ion irradiation data, to derive predictive numerical models linking the width of RA rims to the grain s integrated solar ion radiation exposure time.

Chamberlin, S.↗

Bond-Dependent Thole Model for Polarizability and Spectroscopy

We present a new model for the calculation of molecular polarizabilities from effec- tive atomic polarizabilities. This model is based on the Thole modified dipole inter- action model for molecular polarizabilities, where the total polarizability is computed as a sum of effective atomic polarizabilities modified by dipole-dipole interactions. We extend this model by making the atomic polarizabilities explicit functions of the in- teratomic distances, scaling them by the radius of the volume an atom occupies in a molecule. We use the SCAN functional to show that this model, denoted TholeL, yields accurate molecular polarizabilities with little dependence on the training set. We also demonstrate that the TholeL model yields accurate polarizabilities for configurations far from the ground state structure for a wide range of molecules. Finally, we show that the TholeL model can be used to generate accurate Raman spectra for water, crystalline urea, and urea in water from ab-initio molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of periodic crystals and quasicrystals in ultrathin films of Ba-Ti-O

Here, we model the remarkable thin-film Ba-Ti-O structures formed by heat treatment of an initial perovskite BaTiO 3 thin film on a Pt(111) surface. All structures contain a rumpled Ti-O network with all Ti threefold coordinated with O, and with Ba occupying the larger. mainly Ti 7 O 7 , pores. The quasicrystal structue is a simple decoration of three types of tiles: square, triangle and 30° rhombus, with edge lengths 6.85 Å, joined edge-to-edge in a quasicrystalline pattern; observed periodic crystals in ultrathin film Ba-Ti-O are built from these and other tiles. Simulated STM images reproduce the patterns seen experimentally, and identify the bright protrusions as Ba atoms. The models are consistent with all experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Towards Resolving the Atomization Process of an Idealized Fire Sprinkler with VOF Modeling

Fire suppression modeling depends on accurate characterization of the atomization processes of fire sprinklers.Numerical modeling, particularly the volume of fluid (VOF) method, has been applied to understanding the atomization behavior of an idealized sprinkler geometry consisting of a 9.5 mm inner-diameter cylindrical nozzle and a flat, 25.4 mm diameter disk with a liquid flow rate of 0.87 L/s. The simulations have been performed with an OpenFOAM based VOF solver, using the isoAdvector scheme for interfacial reconstruction. The sheet breakup distance and film thickness were calculated and compared with measurements from a previous study. A mesh refinement study identified the sensitivities in the predicted quantities to mesh resolution. This study enables furtherapplication of the model to simulation of the fully atomized spray.

Engineering↗

INNER CRUSTS OF NEUTRON STARS IN STRONGLY QUANTIZING MAGNETIC FIELDS

We study the ground-state properties of inner crusts of neutron stars in the presence of strong magnetic fields of {approx}10{sup 17} G. Nuclei coexist with a neutron gas and reside in a uniform gas of electrons in the inner crust. This problem is investigated within the Thomas-Fermi model. We extract the properties of nuclei based on the subtraction procedure of Bonche, Levit, and Vautherin. The phase space modification of electrons due to Landau quantization in the presence of strong magnetic fields leads to the enhancement of electron as well as proton fractions at lower densities of {approx}0.001 fm{sup -3}. We find the equilibrium nucleus at each average baryon density by minimizing the free energy and show that, in the presence of strong magnetic fields, it is lower than that in the field-free case. The size of the spherical cell that encloses a nucleus along with the neutron and electron gases becomes smaller in strong magnetic fields compared to the zero-field case. Nuclei with larger mass and atomic numbers are obtained in the presence of strong magnetic fields compared with cases of zero field.

79 ASTRONOMY AND ASTROPHYSICS↗

Fatty acid capped, metal oxo clusters as the smallest conceivable nanocrystal prototypes

Metal oxo clusters of the type M 6 O 4 (OH) 4 (OOCR) 12 (M = Zr or Hf) are valuable building blocks for materials science. Here, we synthesize a series of zirconium and hafnium oxo clusters with ligands that are typically used to stabilize oxide nanocrystals (fatty acids with long and/or branched chains). The fatty acid capped oxo clusters have a high solubility but do not crystallize, precluding traditional purification and single-crystal XRD analysis. We thus develop alternative purification strategies and we use X-ray total scattering and Pair Distribution Function (PDF) analysis as our main method to elucidate the structure of the cluster core. We identify the correct structure from a series of possible clusters (Zr3, Zr4, Zr6, Zr12, Zr10, and Zr26). Excellent refinements are only obtained when the ligands are part of the structure model. Further evidence for the cluster composition is provided by nuclear magnetic resonance (NMR), infrared spectroscopy (FTIR), thermogravimetry analysis (TGA), and mass spectrometry (MS). We find that hydrogen bonded carboxylic acid is an intrinsic part of the oxo cluster. Using our analytical tools, we elucidate the conversion from a Zr6 monomer to a Zr12 dimer (and vice versa), induced by carboxylate ligand exchange. Finally, we compare the catalytic performance of Zr12-oleate clusters with oleate capped, 5.5 nm zirconium oxide nanocrystals in the esterification of oleic acid with ethanol. The oxo clusters present a five times higher reaction rate, due to their higher surface area. Since the oxo clusters are the lower limit of downscaling oxide nanocrystals, we present them as appealing catalytic materials, and as atomically precise model systems. In addition, the lessons learned regarding PDF analysis are applicable to other areas of cluster science as well, from semiconductor and metal clusters, to polyoxometalates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The mechanism of the emergence of distinct overstretched DNA states

Although multiple overstretched DNA states were identified in experiments, the mechanism of the emergence of distinct states is still unclear. Molecular dynamics simulation is an ideal tool to clarify the mechanism, but the force loading rates in stretching achieved by conventional all-atom DNA models are much faster, which essentially affect overstretching states. We employed a modified coarse-grained DNA model with an unprecedented low loading rate in simulations to study the overstretching transitions of end-opened double-stranded DNA. We observed two-strand peeling off for DNA with low stability and the S-DNA with high stability under tension. By introducing a melting-forbidden model which prevents base-pair breaking, we still observed the overstretching transition induced by the formation of S-DNA due to the change of dihedral angle. Hence, we confirmed that the competition between the two strain-softening manners, i.e., base-pair breaking and dihedral angle variation, results in the emergence of distinct overstretched DNA states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calcium kinetics with microgram stable isotope doses and saliva sampling

Studies of calcium kinetics require administration of tracer doses of calcium and subsequent repeated sampling of biological fluids. This study was designed to develop techniques that would allow estimation of calcium kinetics by using small (micrograms) doses of isotopes instead of the more common large (mg) doses to minimize tracer perturbation of the system and reduce cost, and to explore the use of saliva sampling as an alternative to blood sampling. Subjects received an oral dose (133 micrograms) of 43Ca and an i.v. dose (7.7 micrograms) of 46Ca. Isotopic enrichment in blood, urine, saliva and feces was well above thermal ionization mass spectrometry measurement precision up to 170 h after dosing. Fractional calcium absorptions determined from isotopic ratios in blood, urine and saliva were similar. Compartmental modeling revealed that kinetic parameters determined from serum or saliva data were similar, decreasing the necessity for blood samples. It is concluded from these results that calcium kinetics can be assessed with micrograms doses of stable isotopes, thereby reducing tracer costs and with saliva samples, thereby reducing the amount of blood needed.

Clinical Trial↗

One-dimensional time-dependent fluid model of a very high density low-pressure inductively coupled plasma

A time-dependent two-fluid model has been developed to understand axial variations in the plasma parameters in a very high density (peak n e~ > 5x10 19 m –3 ) argon inductively coupled discharge in a long 1.1 cm radius tube. The model equations are written in 1D, with radial losses to the tube walls accounted for by the inclusion of effective particle and energy sink terms. The ambipolar diffusion equation and electron energy equation are solved to find the electron density n e (z,t) and temperature T e (z,t), and the populations of the neutral argon 4s metastable, 4s resonant, and 4p excited state manifolds are calculated in order to determine the stepwise ionization rate and calculate radiative energy losses. The model has been validated through comparisons with Langmuir probe ion saturation current measurements; close agreement between the simulated and measured axial plasma density profiles and the initial density rise rate at each location was obtained at p Ar = 30-60 mTorr. Lastly, we present detailed results from calculations at 60 mTorr, including the time-dependent electron temperature, excited state populations, and energy budget within and downstream of the radiofrequency (RF) antenna.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Semiclassical theory for spatial density oscillations in fermionic systems

We investigate the particle and kinetic-energy densities for a system of N fermions bound in a local (mean-field) potential V(r). We generalize a recently developed semiclassical theory [J. Roccia and M. Brack, Phys. Rev. Lett. 100, 200408 (2008)] in which the densities are calculated in terms of the closed orbits of the corresponding classical system to D>1 dimensions. We regularize the semiclassical results (i) for the U(1) symmetry breaking occurring for spherical systems at r=0 and (ii) near the classical turning points where the Friedel oscillations are predominant and well reproduced by the shortest orbit going from r to the closest turning point and back. For systems with spherical symmetry, we show that there exist two types of oscillations which can be attributed to radial and nonradial orbits, respectively. The semiclassical theory is tested against exact quantum-mechanical calculations for a variety of model potentials. We find a very good overall numerical agreement between semiclassical and exact numerical densities even for moderate particle numbers N. Using a 'local virial theorem,' shown to be valid (except for a small region around the classical turning points) for arbitrary local potentials, we can prove that the Thomas-Fermi functional tau{sub TF}[rho] reproduces the oscillations in the quantum-mechanical densities to first order in the oscillating parts.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ATOMIC DATA OF Cu I FOR THE INVESTIGATION OF ELEMENT ABUNDANCE

A complete set of atomic data of Cu I, including the energy levels, oscillator strengths, and photoionization cross sections, is theoretically studied to investigate element abundance including nonlocal thermodynamic equilibrium (NLTE) effects. The calculations are carried out by using the R-matrix method in the LS-coupling scheme. Twenty terms of Cu II are utilized as target states, and extensive configuration interactions are included to properly delineate the quantum states of Cu II and Cu I. One hundred thirteen bound states and 1699 oscillator strengths for E1 transitions between these states are obtained. Photoionization cross sections for all bound states are calculated in a photon energy range covering 1.28 Ry from the threshold of the respective state. Resonances shown in the photoionization cross sections are identified, and some strong resonances are expected to play an important role in NLTE modeling. The atomic data in this work represent the first complete data set for copper abundance studies. Our results are compared with the experimental and other theoretical data wherever available.

74 ATOMIC AND MOLECULAR PHYSICS↗

Exploring the grand-canonical phase diagram of interacting bosons in optical lattices by trap squeezing

In this article, we theoretically discuss how quantum simulators based on trapped cold bosons in optical lattices can explore the grand-canonical phase diagram of homogeneous lattice boson models, via control of the trapping potential independent of all other experimental parameters (trap squeezing). Based on quantum Monte Carlo, we establish the general scaling relation linking the global chemical potential to the Hamiltonian parameters for the Bose-Hubbard model in a parabolic trap, describing cold bosons in optical lattices; we find that this scaling relation is well captured by a modified Thomas-Fermi scaling behavior - corrected for quantum fluctuations - in the case of sufficiently high density and/or sufficiently weak interactions, and by a mean-field Gutzwiller ansatz over a much larger parameter range. This scaling relation allows us to control experimentally the chemical potential, independent of all other Hamiltonian parameters, via trap squeezing; given that the global chemical potential coincides with the local chemical potential in the trap center, measurements of the central density as a function of the chemical potential give access to the information on the bulk compressibility of the Bose-Hubbard model. Supplemented with time-of-flight measurements of the coherence properties, the measurement of compressibility enables one to discern among the various possible phases realized by bosons in an optical lattice with or without external (periodic or random) potentials - for example, superfluid, Mott insulator, band insulator, and Bose glass. We theoretically demonstrate the trap-squeezing investigation of these phases in the case of bosons in a one-dimensional optical lattice and in a one-dimensional incommensurate superlattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗