Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computational simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Fuel Efficient Diesel Particulate Filter (DPF) Modeling and Development

The project described in this report seeks to promote effective diesel particulate filter technology with minimum fuel penalty by enhancing fundamental understanding of filtration mechanisms through targeted experiments and computer simulations. The overall backpressure of a filtration system depends upon complex interactions of particulate matter and ash with the microscopic pores in filter media. Better characterization of these phenomena is essential for exhaust system optimization. The acicular mullite (ACM) diesel particulate filter substrate is under continuing development by Dow Automotive. ACM is made up of long mullite crystals which intersect to form filter wall framework and protrude from the wall surface into the DPF channels. ACM filters have been demonstrated to effectively remove diesel exhaust particles while maintaining relatively low backpressure. Modeling approaches developed for more conventional ceramic filter materials, such as silicon carbide and cordierite, have been difficult to apply to ACM because of properties arising from its unique microstructure. Penetration of soot into the high-porosity region of projecting crystal structures leads to a somewhat extended depth filtration mode, but with less dramatic increases in pressure drop than are normally observed during depth filtration in cordierite or silicon carbide filters. Another consequence is greater contact between the soot and solid surfaces, which may enhance the action of some catalyst coatings in filter regeneration. The projecting crystals appear to provide a two-fold benefit for maintaining low backpressures during filter loading: they help prevent soot from being forced into the throats of pores in the lower porosity region of the filter wall, and they also tend to support the forming filter cake, resulting in lower average cake density and higher permeability. Other simulations suggest that soot deposits may also tend to form at the tips of projecting crystals due to the axial velocity component of exhaust moving down the filter inlet channel. Soot mass collected in this way would have a smaller impact on backpressure than soot forced into the flow restrictions deeper in the porous wall structure. This project has focused on the development of computational, analytical, and experimental techniques that are generally applicable to a wide variety of exhaust aftertreatment technologies. By helping to develop improved fundamental understanding pore-scale phenomena affecting filtration, soot oxidation, and NOX abatement, this cooperative research and development agreement (CRADA) has also assisted Dow Automotive in continuing development and commercialization of the ACM filter substrate. Over the course of this research project, ACM filters were successfully deployed on the Audi R10 TDI racecar which won the 24 Hours of LeMans endurance race in 2006, 2007, and 2008; and the 12 Hours of Sebring endurance race in 2006 and 2007. It would not have been possible for the R10 to compete in these traditionally gasoline-dominated events without reliable and effective exhaust particulate filtration. These successes demonstrated not only the performance of automotive diesel engines, but the efficacy of DPF technology as it was being deployed around the world to meet new emissions standards on consumer vehicles. During the course of this CRADA project, Dow Automotive commercialized their ACM DPF technology under the AERIFYTM DPF brand.

33 ADVANCED PROPULSION SYSTEMS↗

Beam Breakup Simulations for the Scorpius Flash-Radiography Accelerator

Beam breakup (BBU) in linear induction accelerators (LIAs) used for flash radiography is problematic because the high-frequency beam motion can blur the source spot, thereby degrading resolution. Amplification of BBU depends directly on details of cell design and is suppressed in operation by the solenoidal magnetic field focusing on the electron beam. Therefore, much effort has gone into design of the cells and magnetic focusing for the new Scorpius radiography LIA. Here, in this article, we use computer simulations to demonstrate that BBU in Scorpius should be no more than in present radiography LIAs at the Los Alamos National Laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phase-field modeling of diffusional phase behaviors of solid surfaces: A case study of phase-separating Li X FePO 4 electrode particles

In this paper, we present a comprehensive phase-field model for simulating diffusion-mediated kinetic phase behaviors near the surface of a solid particle. The model incorporates elastic inhomogeneity and anisotropy, diffusion mobility anisotropy, interfacial energy anisotropy, and Cahn–Hilliard diffusion kinetics. The free energy density function is formulated based on the regular solution model taking into account the possible solute-surface interaction near the surface. The coherency strain energy is computed using the Fourier-spectral iterative-perturbation method due to the strong elastic inhomogeneity with a zero surface traction boundary condition. Employing a phase-separating Li X FePO 4 electrode particle for Li-ion batteries as a model system, we perform parametric three-dimensional computer simulations. The model permits the observation of surface phase behaviors that are different from the bulk counterpart. For instance, it reproduces the theoretically well-established surface modes of spinodal decomposition of an unstable solid solution: the surface mode of coherent spinodal decomposition and the surface-directed spinodal decomposition mode. We systematically investigate the influences of major factors on the kinetic surface phase behaviors during the diffusional process. Finally, our simulation study provides insights for tailoring the internal phase microstructure of a particle by controlling the surface phase morphology.

25 ENERGY STORAGE↗

Special Analyses for the Hanford Integrated Disposal Facility Performance Assessment - 20102

In 2014, the Department of Energy (DOE) Office of River Protection and its contractors began to develop a performance assessment for the near-surface disposal of low-level and mixed low-level waste at the Hanford Site's Integrated Disposal Facility (IDF). The IDF is a doubly-lined landfill that was constructed between 2004 and 2006 to be the disposal facility for the vitrified low-activity waste that will be produced at the Waste Treatment and Immobilization Plant (WTP). IDF is also expected to receive solid secondary waste produced at the WTP and other solid wastes from site activities. The IDF has been in a preoperational state awaiting authorization from DOE and a RCRA permit modification from the State of Washington Department of Ecology to receive waste. Both the Disposal Authorization Statement and permit modification require a performance assessment demonstrating that the system of engineered and natural features will limit releases of radionuclides and hazardous chemicals from the IDF and be protective of human health and the environment. The simulated duration is 10,000 years. Based on the analyses presented in the 2017 Integrated Disposal Facility Performance Assessment, DOE issued a conditional Operating Disposal Authorization Statement for the IDF in June 2018. The long-term performance of the IDF to be protective of human health and the environment was evaluated under the requirements of DOE Order 435.1, Radioactive Waste Management. Computer simulations were performed to evaluate whether or not the IDF would comply with DOE requirements. In the time that has passed since the performance assessment was approved by DOE, new information has been discovered that had not been considered in the performance assessment. Since this new information has not been evaluated, the potential impact of the changes have not been taken into consideration in DoE's disposal authorization. DOE and its contractors follow a change control process to screen and, when necessary, evaluate new information that could potentially impact the conclusions of the completed performance assessment. This paper will describe the change control process and provide two examples of evaluations performed following the change control process. The first example evaluates a new waste form for liquid secondary waste that was not evaluated in the performance assessment. In the performance assessment, liquid secondary waste was assumed to be solidified with grout. A new recommendation to dispose of the liquid secondary waste after drying it to a powder was evaluated. The second example evaluates inventory implications from changes to the flow sheet that estimates the feed composition to the low-activity waste vitrification facility. The changes result in higher strontium concentrations in the vitrified waste stream. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Enhanced dynamics of hydrated tRNA on nanodiamond surfaces: A combined neutron scattering and MD simulation study

Nontoxic, biocompatible nanodiamonds (ND) have recently been implemented in rational, systematic design of optimal therapeutic use in nanomedicines. However, hydrophilicity of the ND surface strongly influences structure and dynamics of biomolecules that restrict in situ applications of ND. Therefore, fundamental understanding of the impact of hydrophilic ND surface on biomolecules at the molecular level is essential. For tRNA, we observe an enhancement of dynamical behavior in the presence of ND contrary to generally observed slow motion at strongly interacting interfaces. We took advantage of neutron scattering experiments and computer simulations to demonstrate this atypical faster dynamics of tRNA on ND surface. The strong attractive interactions between ND, tRNA, and water give rise to unlike dynamical behavior and structural changes of tRNA in front of ND compared to without ND. As a result, our new findings may provide new design principles for safer, improved drug delivery platforms.

36 MATERIALS SCIENCE↗

First-principles study of hydrogen diffusion and self-clustering below tungsten surfaces

The diffusion and self-clustering nucleation behavior of hydrogen (H) without vacancies below tungsten (W) surfaces are important for understanding the retention of deuterium (D) in W crystals exposed to high-flux and low-energy D plasma. The H migration energy and binding energy of H to self-clusters near the W(100), W(110), and W(111) surfaces have been investigated by first-principles computer simulations using density functional theory. H diffusion from adsorption sites on the W(100), W(110), and W(111) surfaces into solute sites in the bulk requires energies of at least 1.21, 1.78, and 1.80 eV, respectively, while 0.27, 0.31, and 0.24 eV for the reverse process. In addition, the lateral diffusion of H between two subsurface layers below the W surfaces has been investigated. Two H atoms at a depth of 0.08 nm below the W(110) surface have the highest binding energy, followed by H atom pairs below the W(111) and W(110) surfaces. The nucleation and stability of H clusters depend on the surface orientation. A planar configuration between the first nearest neighbor {100} planes is energetically favorable for H self-clustering below the W(100), W(110), and W(111) surfaces. In conclusion, the thermal stability of a platelet containing 16 H atoms below the W surfaces at 300 and 600 K was also studied by ab initio molecular dynamics simulations, which indicate that the H platelet below a W(111) surface is more stable than that below either the W(100) or the W(110) surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding shape entropy through local dense packing

Entropy drives the phase behavior of colloids ranging from dense suspensions of hard spheres or rods to dilute suspensions of hard spheres and depletants. Entropic ordering of anisotropic shapes into complex crystals, liquid crystals, and even quasicrystals was demonstrated recently in computer simulations and experiments. The ordering of shapes appears to arise from the emergence of directional entropic forces (DEFs) that align neighboring particles, but these forces have been neither rigorously defined nor quantified in generic systems. In this paper, we show quantitatively that shape drives the phase behavior of systems of anisotropic particles upon crowding through DEFs. We define DEFs in generic systems and compute them for several hard particle systems. We show they are on the order of a few times the thermal energy (k B T) at the onset of ordering, placing DEFs on par with traditional depletion, van der Waals, and other intrinsic interactions. In experimental systems with these other interactions, we provide direct quantitative evidence that entropic effects of shape also contribute to self-assembly. We use DEFs to draw a distinction between self-assembly and packing behavior. We show that the mechanism that generates directional entropic forces is the maximization of entropy by optimizing local particle packing. Finally, we show that this mechanism occurs in a wide class of systems and we treat, in a unified way, the entropy-driven phase behavior of arbitrary shapes, incorporating the well-known works of Kirkwood, Onsager, and Asakura and Oosawa.

36 MATERIALS SCIENCE↗

Multilevel Techniques for Compression and Reduction of Scientific Data-Quantitative Control of Accuracy in Derived Quantities

Although many compression algorithms are focused on preserving pointwise values of the data, application scientists are generally more concerned with derived quantities. Equally well, the user may even be willing to accept a high level of lossiness in the compression provided that the compressed data respect certain invariants, such as mass conservation. In the current work, we develop a mathematical framework and techniques that enable data to be adaptively compressed while maintaining a specified tolerance on a class of user-prescribed quantities. Here, the algorithm is used to augment the functionality of the data reduction package MGARD developed in previous work and the functionality is illustrated by a range of application including data from computational simulation of autocatalytic reaction simulation, turbulent combustion simulation, experimental data obtained from magnetic confinement fusion experiment, and simulation of turbulent flow along a rectangular channel. In each case, we consider one or more relevant quantities of interest and reduce the data so as to preserve these quantities.

97 MATHEMATICS AND COMPUTING↗

Damping Ring R&D at CESR-TA

Accelerators that collide high energy beams of matter and anti-matter are essential tools for the investigation of the fundamental constituents of matter, and the search for new forms of matter and energy. A “Linear Collider” is a machine that would bring high energy and very compact bunches of electrons and positrons (anti-electrons) into head-on collision. Such a machine would produce (among many other things) the newly discovered Higgs particle, enabling a detailed study of its properties. Among the most critical and challenging components of a linear collider are the damping rings that produce the very compact and intense beams of electrons and positrons that are to be accelerated into collision. Hot dilute particle beams are injected into the damping rings, where they are compressed and cooled. The size of the positron beam must be reduced more than a thousand fold in the damping ring, and this compression must be accomplished in a fraction of a second. The cold compact beams are then extracted from the damping ring and accelerated into collision at high energy. The proposed International Linear Collider (ILC), would require damping rings that routinely produce such cold, compact and intense beams. The goal of the Cornell study was a credible design for the damping rings for the ILC. Among the technical challenges of the damping rings; the development of instrumentation that can measure the properties of the very small beams in a very narrow window of time, and mitigation of the forces that can destabilize the beams and prevent adequate cooling, or worse lead to beam loss. One of the most pernicious destabilizing forces is due to the formation of clouds of electrons in the beam pipe. The electron cloud effect is a phenomenon in particle accelerators in which a high density of low energy electrons, build up inside the vacuum chamber. At the outset of the study, it was anticipated that electron cloud effects would limit the intensity of the positron ring, and that an instability associated with residual gas in the beam pipe would limit the intensity of the electron ring. It was also not clear whether the required very small beam size could be achieved. The results of this study are important contributions to the design of both the electron and positron damping rings in which all of those challenges are addressed and overcome. Our findings are documented in the ILC Technical Design Report, a document that represents the work of an international collaboration of scientists. Our contributions include design of the beam magnetic optics for the 3 km circumference damping rings, the vacuum system and surface treatments for electron cloud mitigation, the design of the guide field magnets, design of the superconducting damping wigglers, and new detectors for precision measurement of beam properties. Our study informed the specification of the basic design parameters for the damping rings, including alignment tolerances, magnetic field errors, and instrumentation. We developed electron cloud modelling tools and simulations to aid in the interpretation of the measurements that we carried out in the Cornell Electron-positron Storage Ring (CESR). The simulations provide a means for systematic extrapolation of our measurements at CESR to the proposed ILC damping rings, and ultimately to specify how the beam pipes should be fabricated in order to minimize the effects of the electron cloud. With the conclusion of this study, the design of the essential components of the damping rings is complete, including the development and characterization (with computer simulations) of the beam optics, specification of techniques for minimizing beam size, design of damping ring instrumentation, R&D into electron cloud suppression methods, tests of long term durability of electron cloud coatings, and design of damping ring vacuum system components.

43 PARTICLE ACCELERATORS↗

Final Report for Grant # DE-FG02-02ER46000 Simulations of Self-Assembly of Tethered Nanoparticle Shape Amphiphiles

Self-assembly of nanoparticle building blocks including nanospheres, nanorods, nanocubes, nano plates, nanoprisms, etc., may provide a promising means for manipulating these building blocks into functional and useful materials. One increasingly popular method for self-assembly involves functionalizing nanoparticles and nanostructured molecules with “tethers” of organic polymers or biomolecules with specific or nonspecific interactions to facilitate their assembly. However, there is little theory and little understanding of the general principles underlying self-assembly in these complex materials. Using computer simulation to elucidate the principles of self-assembly and develop a predictive theoretical framework was the central goal of this project.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fluid modeling of low-temperature plasmas

Fluid models are essential for understanding and predicting low-temperature plasma (LTP) behavior in various scientific and industrial settings. This paper provides an introductory tutorial on fluid modeling of LTPs, covering model formulation, implementation, and computational simulations. The tutorial focuses on five main components of the formulation of LTP fluid models: fluid flow, energy, chemistry, electromagnetism, and material properties, as well as in essential aspects of model implementations, including multiscale phenomena, multiphysics coupling, and numerical convergence. Designed for students and early-career researchers, this work offers a practical foundation for developing and using fluid models, from in-house computational codes to commercial software, bridging fundamental theory with real-world applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predicting Complex Relaxation Processes in Metallic Glass

Relaxation processes significantly influence the properties of glass materials. However, understanding their specific origins is difficult; even more challenging is to forecast them theoretically. In this study, using microseconds molecular dynamics simulations together with an accurate many-body interaction potential, we predict that an Al 90 Sm 10 metallic glass would have complex relaxation behaviors: In addition to the main (α) relaxation, the glass (i) shows a pronounced secondary (β) relaxation at cryogenic temperatures and (ii) exhibits an anomalous relaxation process (α 2 ) accompanying α relaxation. Both of the predictions are verified by experiments. Computational simulations reveal the microscopic origins of relaxation processes: while the pronounced β relaxation is attributed to the abundance of stringlike cooperative atomic rearrangements, the anomalous α 2 process is found to correlate with the decoupling of the faster motions of Al with slower Sm atoms. The combination of simulations and experiments represents a first glimpse of what may become a predictive routine and integral step for glass physics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new FFT-based algorithm to compute Born radii in the generalized Born theory of biomolecule solvation

In this paper, a new method for calculating effective atomic radii within the generalized Born (GB) model of implicit solvation is proposed, for use in computer simulations of biomolecules. First, a new formulation for the GB radii is developed, in which smooth kernels are used to eliminate the divergence in volume integrals intrinsic in the model. Next, the fast Fourier transform (FFT) algorithm is applied to integrate smoothed functions, taking advantage of the rapid spectral decay provided by the smoothing. The total cost of the proposed algorithm scales as O(N{sup 3}logN+M) where M is the number of atoms comprised in a molecule and N is the number of FFT grid points in one dimension, which depends only on the geometry of the molecule and the spectral decay of the smooth kernel but not on M. To validate our algorithm, numerical tests are performed for three solute models: one spherical object for which exact solutions exist and two protein molecules of differing size. The tests show that our algorithm is able to reach the accuracy of other existing GB implementations, while offering much lower computational cost.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

FY15 Report on Thermomechanical Testing

Sandia is participating in the third phase of a United States (US)-German Joint Project that compares constitutive models and simulation procedures on the basis of model calculations of the thermomechanical behavior and healing of rock salt (Salzer et al. 2015). The first goal of the project is to evaluate the ability of numerical modeling tools to correctly describe the relevant deformation phenomena in rock salt under various influences. Among the numerical modeling tools required to address this are constitutive models that are used in computer simulations for the description of the thermal, mechanical, and hydraulic behavior of the host rock under various influences and for the long-term prediction of this behavior. Achieving this goal will lead to increased confidence in the results of numerical simulations related to the secure disposal of radioactive wastes in rock salt. Results of the Joint Project may ultimately be used to make various assertions regarding stability analysis of an underground repository in salt during the operating phase as well as long-term integrity of the geological barrier in the post-operating phase A primary evaluation of constitutive model capabilities comes by way of predicting large-scale field tests. The Joint Project partners decided to model Waste Isolation Pilot Plant (WIPP) Rooms B & D which are full-scale rooms having the same dimensions. Room D deformed under natural, ambient conditions while Room B was thermally driven by an array of waste-simulating heaters (Munson et al. 1988; 1990). Existing laboratory test data for WIPP salt were carefully scrutinized and the partners decided that additional testing would be needed to help evaluate advanced features of the constitutive models. The German partners performed over 140 laboratory tests on WIPP salt at no charge to the US Department of Energy (DOE).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Parallel-in-Time Multigrid Approach to Constrained Optimization

Valuable computer simulations such as weather prediction, traffic flow, and resource allocation are time dependent problems. One such example is the viscous Burgers’ equation which can model various systems such as fluids and traffic flow. Further, many of these models require optimization routines to meet the needs of many businesses. Unfortunately, traditional sequential-in-time algorithms have become bottlenecks in solution model generation. This is because computer architectures have begun to rely more and more on concurrency (parallel processing) as opposed to processor power to provide greater performance. To avoid this bottleneck, many researchers use parallelization methods to take advantage of the increasing number of processors in computers. This approach allows for variables in a problem to be solved for simultaneously. As such, parallelization is a crucial requirement to achieve high-performance computing.

97 MATHEMATICS AND COMPUTING↗

Electron–Ion Temperature Ratio in Astrophysical Shocks

Collisionless shock waves in supernova remnants and the solar wind heat electrons less effectively than they heat ions, as is predicted by kinetic simulations. However, the values of T e /T p inferred from the Hα profiles of supernova remnant shocks behave differently as a function of Mach number or Alfvén Mach number than what is measured in the solar wind or predicted by simulations. Here we determine T e /T p for supernova remnant shocks using Hα profiles, shock speeds from proper motions, and electron temperatures from X-ray spectra. We also improve the estimates of sound speed and Alfvén speed used to determine Mach numbers. We find that the Hα determinations are robust and that the discrepancies among supernova remnant shocks, solar wind shocks, and computer-simulated shocks remain. We discuss some possible contributing factors, including shock precursors, turbulence, and varying preshock conditions.

79 ASTRONOMY AND ASTROPHYSICS↗

Analyst-to-Analyst Variability in Simulation-Based Prediction

This report describes findings from the culminating experiment of the LDRD project entitled, "Analyst-to-Analyst Variability in Simulation-Based Prediction". For this experiment, volunteer participants solving a given test problem in engineering and statistics were interviewed at different points in their solution process. These interviews are used to trace differing solutions to differing solution processes, and differing processes to differences in reasoning, assumptions, and judgments. The issue that the experiment was designed to illuminate -- our paucity of understanding of the ways in which humans themselves have an impact on predictions derived from complex computational simulations -- is a challenging and open one. Although solution of the test problem by analyst participants in this experiment has taken much more time than originally anticipated, and is continuing past the end of this LDRD, this project has provided a rare opportunity to explore analyst-to-analyst variability in significant depth, from which we derive evidence-based insights to guide further explorations in this important area.

97 MATHEMATICS AND COMPUTING↗

Molecular-dynamics simulation of the heat capacity for nickel and copper clusters: Shape and size effects

We have investigated the heat capacity of ideal Cu and Ni fcc clusters with diameters from 2 to 6 nm in the temperature range 200-800 K by the molecular-dynamics method using a modified tight-binding potential. Our analysis has shown consistency with the experimental results at temperatures of 200-300 K. The data obtained are also indicative of several regularities that are in agreement with the analytical calculations. We have concluded from the results of our computer simulations that the heat capacity in the case of isolated free clusters can exceed that of a bulk material, with this difference decreasing as the nanoparticle grows proportionally to the reduction in the fraction of surface atoms. The excess of the heat capacity for ideal copper and nickel nanoclusters with D = 6 nm at T = 200 K has been found to be 10% and 13%, respectively. Consequently, the large heat capacities of copper and nickel nanostructures observed in some real experiments cannot be related to the characteristics of free clusters. We hypothesize that these properties of a nanomaterial depend on the degree of agglomeration of its constituent particles, i.e., the surfaces and interphase boundaries of interconnected nanoclusters can have a strong effect. To test this hypothesis, we took nickel and copper clusters of various sizes (4000-7200 atoms) produced through the simulation of condensation from the gas phase. At high temperatures, we failed to adequately assess the role of the interphase boundaries in calculating the heat capacity of nanoparticles. The reason was the mass diffusion of Ni or Cu atoms to impart an energetically more favorable shape and structure to the synthesized clusters. At low temperatures, the heat capacity of such clusters exceeded that of clusters with an ideal shape and structure by a value from 3.2% to 10.6%. We have concluded that the Ni and Cu clusters produced in real experiments cannot be applied in devices using the thermal energy of such clusters without a preliminary optimization stage, because their external shape and interior structure are nonideal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗