Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIRECT REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Spectroscopic factors and asymptotic normalization coefficients in mirror three-body systems

Using a three-body model, we study the dependence of spectroscopic factors for the overlap integrals <core+N|core+N+N> on the binding energy of the core + N subsystem, considering as prototypes {sup 6}He, {sup 6}Be, {sup 9}Li, {sup 9}C, {sup 18}O, and {sup 18}Ne. We show that at small N-core binding energies these spectroscopic factors can be strongly influenced by the geometrical mismatch between the two-body N-core wave function that stretches into the classically forbidden region and the spatially confined three-body function. This mismatch comes from the strong two-body correlations between the nucleons outside the core and due to the core recoil effects. The mismatch leads to symmetry breaking in mirror spectroscopic factors that in some cases can be large enough to be observed in nucleon removal reactions. It is also responsible for deviations of the ratios of mirror asymptotic normalization coefficients (ANCs) from the simple model-independent analytical estimates. We discuss the influence of such mirror symmetry breaking on the prediction of direct stellar (p,{gamma}) reactions from the measured mirror neutron ANCs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Accurate ab initio potential energy surface, thermochemistry, and dynamics of the F{sup −} + CH{sub 3}F S{sub N}2 and proton-abstraction reactions

We develop a full-dimensional global analytical potential energy surface (PES) for the F{sup −} + CH{sub 3}F reaction by fitting about 50 000 energy points obtained by an explicitly correlated composite method based on the second-order Møller–Plesset perturbation-F12 and coupled-cluster singles, doubles, and perturbative triples-F12a methods and the cc-pVnZ-F12 [n = D, T] basis sets. The PES accurately describes the (a) back-side attack Walden inversion mechanism involving the pre- and post-reaction (b) ion-dipole and (c) hydrogen-bonded complexes, the configuration-retaining (d) front-side attack and (e) double-inversion substitution pathways, as well as (f) the proton-abstraction channel. The benchmark quality relative energies of all the important stationary points are computed using the focal-point analysis (FPA) approach considering electron correlation up to coupled-cluster singles, doubles, triples, and perturbative quadruples method, extrapolation to the complete basis set limit, core-valence correlation, and scalar relativistic effects. The FPA classical(adiabatic) barrier heights of (a), (d), and (e) are −0.45(−0.61), 46.07(45.16), and 29.18(26.07) kcal mol{sup −1}, respectively, the dissociation energies of (b) and (c) are 13.81(13.56) and 13.73(13.52) kcal mol{sup −1}, respectively, and the endothermicity of (f) is 42.54(38.11) kcal mol{sup −1}. Quasiclassical trajectory computations of cross sections, scattering (θ) and initial attack (α) angle distributions, as well as translational and internal energy distributions are performed for the F{sup −} + CH{sub 3}F(v = 0) reaction using the new PES. Apart from low collision energies (E{sub coll}), the S{sub N}2 excitation function is nearly constant, the abstraction cross sections rapidly increase with E{sub coll} from a threshold of ∼40 kcal mol{sup −1}, and retention trajectories via double inversion are found above E{sub coll} = ∼ 30 kcal mol{sup −1}, and at E{sub coll} = ∼ 50 kcal mol{sup −1}, the front-side attack cross sections start to increase very rapidly. At low E{sub coll}, the indirect mechanism dominates (mainly isotropic backward-forward symmetric θ distribution and translationally cold products) and significant long-range orientation effects (isotropic α distribution) and barrier recrossings are found. At higher E{sub coll}, the S{sub N}2 reaction mainly proceeds with direct rebound mechanism (backward scattering and hot product translation)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Liquid-phase hydrodeoxygenation of lignin-derived phenolics on Pd/Fe: A mechanistic study

Although Pd/Fe bimetallic catalysts have been extensively studied in vapor-phase hydrodeoxygenation of phenolics (i.e., guaiacol, cresol), little is yet known about their performance in liquid-phase reactions. In this work, we present a mechanistic study on the Pd/Fe bimetallic catalysts in liquid-phase hydrodeoxygenation of phenolics. The role of tautomerization in hydrodeoxygenation of the lignin-derived phenolics, particularly for ring saturation, is systematically studied by employing two representative modeling compounds: phenol (a molecule that is keto-enol tautomeric) and diphenyl ether (a molecule that does not allow ketol-enol tautomerization). It was found that although the addition of oxyphilic Fe inhibits the direct aromatic ring saturation reaction typically occurring on Pd, tautomerization opens another reaction pathway toward ring saturation products (i.e. cyclohexanone, cyclohexanol, cyclohexane et al.), where both tautomerization and the hydrogenation of keto isomers are significantly enhanced to produce cyclohexanol followed by direct hydrogenolysis of the cyclohexanol to cyclohexane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alkali Metal Ions Dictate the Structure and Reactivity of an Iron(II) Imido Complex

The presence of redox innocent metal ions has been proposed to modulate the reactivity of metal ligand multiple bonds; however, insight from structure/function relationships is limited. Here, alkali metal reduction of the Fe(III) imido complex [Ph 2 B( t BuIm) 2 Fe=NDipp] (1) provides the series of structurally characterized Fe(II) imido complexes [Ph 2 B( t BuIm) 2 Fe=NDippLi(THF) 2 ] (2), [Ph 2 B( t BuIm) 2 Fe=NDippNa(THF) 3 ] (3), and [Ph 2 B( t BuIm) 2 Fe=NDippK] 2 (4), in which the alkali metal cations coordinate the imido ligand. Structural investigations demonstrate that the alkali metal ions modestly lengthen the Fe=N bond distance from that in the charge separated complex [Ph 2 B( t BuIm) 2 Fe=NDipp][K(18-C-6)THF 2 ] (5), with the longest bond observed for the smallest alkali metal ion. In contrast to 5, the imido ligands in 2–4 can be protonated and alkylated to afford Fe(II) amido complexes. Combined experimental and computational studies reveal that the alkali metal polarizes the Fe=N bond, and the basicity of imido ligand increases according to 5 < 4 ≈ 3 < 2. The basicity of the imido ligands influences the relative rates of reaction with 1,4-cyclohexadiene, specifically by gating access to complex 5, which is the species that is active for HAT. All complexes 2–4 react with benzophenone form metastable Fe(II) intermediates that subsequently eliminate the metathesis product Ph 2 C=NDipp, with relative rates dependent on the alkali metal ion. By contrast, the same reaction with 5 does not lead to the formation of Ph 2 C=NDipp. Furthermore, these results demonstrate that the coordination of alkali metal ions dictate both the structure and reactivity of the imido ligand and moreover can direct the reactivity of reaction intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Trojan Horse Method in Nuclear Astrophysics

The Trojan Horse Method allows for the measurements of cross section in nuclear reaction between charged particles at astrophysical energies. The basic features of the method are discussed in the non resonant reactions case. A review of applications aimed to extract the bare nucleus astrophysical S{sub b}(E) factor for two body processes are presented. The information on electron screening potential U{sub e} were obtained from comparison with direct experiments of fusion reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The role of NaCl in flame chemistry, in the deposition process, and in its reactions with protective oxides as related to hot corrosion

Sodium chloride is believed to be the primary source of turbine engine contamination that contributes to hot corrosion. The behavior of NaCl-containing aerosols ingested with turbine intake air is very complex; some of the NaCl may vaporize during combustion while some may remain as particulates. The NaCl can lead to Na2SO4 formation by several possible routes or it can contribute to corrosion directly. Hydrogen or oxygen atom reaction with NaCl(c) was shown to result in the release of Na(g). Gaseous NaCl in flames can be partially converted to gaseous Na2SO4 by homogeneous reactions. The remaining gaseous NaCl and other Na-containing molecules can act as sodium carriers for condensate deposition of Na2SO4 on cool surfaces. A frozen boundary layer theory was developed to predict the rates of deposition. The condensed phase NaCl can be converted directly to condensed Na2SO4 by reaction with sulfur oxides and O2. Reaction of gaseous NaCl with Cr2O3 results in the vapor phase transport of chromium by the formation of complex Cr-containing gaseous molecules. Similar gaseous complexes are formed with molybdenum. The presence of gaseous NaCl was shown to affect the oxidation kinetics of Ni-Cr alloys. It also causes changes in the surface morphology of Al2O3 scales formed on Al-containing alloys.

Kohl, F. J.↗

Radiation Reaction Effects in Ultrahigh Irradiance Laser Pulse Interactions with Multiple Electrons

When ultrahigh irradiance laser pulses interact with high energy electrons, the emission of radiation from these electrons can significantly affect the motion of the electrons themselves (radiation reaction). Since the spatial grid resolution necessary to self-consistently simulate high intensity laser interactions with electrons via particle-in-cell methods is prohibitive, in this paper we describe a particle-particle code to simulate such interactions. We directly solve the interaction between the electrons numerically allowing an accurate description of the dynamics. We examine the collective effects of the simplest case of two electrons with equal energies of 1 GeV, but with initial spatial offsets along the laser propagation direction undergoing strong radiation reaction effects. We find that for a 30 fs laser pulse of intensity 2x10{sup 22} W/cm{sup 2} that both electrons lose 96% of their kinetic energy in less than 10 microns and that the electron in front receives a large kick from the radiation emitted by the electron in back. This makes possible a high power gamma ray source.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Endpoint Slippage Analysis in the Presence of Impedance Rise and Loss of Active Material

Endpoint slippage analysis can be used to quantify the reduction and oxidation side-reactions occurring in rechargeable batteries. Application of this technique often disregards the interference of additional aging modes, such as impedance rise and loss of active material (LAM). Here, we show that these modes can themselves induce slippage of endpoints, making the direct determination of parasitic reactions more difficult. We provide equations that describe the slippages caused by LAM and impedance rise. We show that these equations can, in principle, account for the contribution of these additional modes to endpoint slippage, enabling “correction” of testing data to quantify the side-reactions of interest. However, the challenge with this approach is that it requires information about the average Li+ content of disconnected active material domains, which is, in many cases, unknowable. The present work explores mathematical connections between measurable quantities (such as capacity fade and endpoint slippages) and the extent of LAM or impedance rise endured by the cell, and discuss how the tracking of endpoints can better serve battery diagnostics.

Rodrigues, Marco-Tulio F. [Argonne National Labora↗

Kinetics of the Reactions of F((sup 2)P) and Cl((sup 2)P) with HNO3

The kinetics of the reactions of HNO3 with fluorine (k(sub 1)) and Chlorine (k(sub 2)) atoms have been studied by using a time-resolved long-path laser absorption technique to monitor the appearance of product NO3 radicals following 351-nm pulsed laser photolysis of X2/HNO3/He mixtures (X = F,Cl). Absolute rate coefficients for the F((sup 2)P) + HNO reaction have been determined over the temperature range 260-373 K. Between 260 and 320 K, the data are adequately represented by the Arrhenius expression k(sub 1)(T) = (6.0 +/- 2.6) x 10(exp -12) exp[(40 +/- 120)/T]cu cm/(molecule.s). Between 335 and 373 K, the rate coefficient is found to be (2.0 +/- 0.3) x 10(exp -11)cu cm/(molecule.s) independent of temperature. The observed temperature dependence suggests that reaction proceeds via competing direct abstraction and complex pathways. No NO3 production was observed in the experiments with X equals Cl, thus establishing that k(sub 2)(298 K) is less than 2 x 10(exp -16) cu cm/(molecule.s). The Cl((sup 2)P) + HNO reaction was also investigated by using a pulsed laser photolysis-resonance fluorescence technique to monitor the decay of Cl((sup 2)P). Upper limit values for k(sub 2) obtained from these experiments, in units of 10(exp -16)cu cm/(molecule.s), are 13 at 298 K and 10 at 400 K.

Wine, P. H.↗

Fuel mixture approach for solution combustion synthesis of Ca{sub 3}Al{sub 2}O{sub 6} powders

Single-phase 3CaO.Al{sub 2}O{sub 3} powders were prepared via solution combustion synthesis using a fuel mixture of urea and {beta}-alanine. The concept of using this fuel mixture comes from the individual reactivity of calcium nitrate and aluminum nitrate with respect to urea and {beta}-alanine. It was proved that urea is the optimum fuel for Al(NO{sub 3}){sub 3} whereas {beta}-alanine is the most suitable fuel for Ca(NO{sub 3}){sub 2}. X-ray diffraction and thermal analysis investigations revealed that heating at 300 deg. C the precursor mixture containing the desired metal nitrates, urea and {beta}-alanine triggers a vigorous combustion reaction, which yields single-phase nanocrystalline 3CaO.Al{sub 2}O{sub 3} powder (33.3 nm). In this case additional annealing was no longer required. The use of a single fuel failed to ensure the formation of 3CaO.Al{sub 2}O{sub 3} directly from the combustion reaction. After annealing at 900 deg. C for 1 h, the powders obtained by using a single fuel (urea or {beta}-alanine) developed a phase composition comprising of 3CaO.Al{sub 2}O{sub 3}, 12CaO.7Al{sub 2}O{sub 3} and CaO.

36 MATERIALS SCIENCE↗

Ultra-high aspect ratio pores milled in diamond via laser, ion and electron beam mediated processes

Microfabrication techniques are critical for the rapid prototyping and development of applications for cutting edge materials. Recently diamond has gained considerable interest for quantum photonic, biosensing, inertial confinement fusion and magnetometer applications. In this article, ultra-high aspect ratio milling of diamond micropores by photon, ion and electron based methods is reported. A multiphoton absorption laser ablation approach is revealed to rapidly produce sub-10 μm diameter micropores in diamond with an aspect ratio of 14:1 and a tapered profile at the surface interface. Chemically active, oxygen focused ion beam milling produces high-aspect ratio pores in diamond with an aspect ratio of 65:1 and minimal tapering over the length of the pore, overcoming the physical interaction volume limitations imposed in conventional gallium based focused ion beam milling and laser ablation methods. Oxygen-mediated electron beam induced etching is revealed to negate the limitations imposed by physical sputtering mechanisms utilized in focused ion beam milling via the direct initiation of chemical reactions at the receding surface, producing aspect ratios on the order of 200:1. Numerical simulations reveal the physical basis for the superior aspect-ratio pore milling of the oxygen focused ion beam milling and electron beam induced etching methods. Our results demonstrate direct-write methods for the fabrication of ultra-high aspect micropores in diamond and provide insight into the underlying mechanisms of these physical processes. The three methods demonstrated here can be interchanged for applications based on the desired characteristic aspect ratio and process throughput.

36 MATERIALS SCIENCE↗

Characterizing the Geometry and Quantifying the Impact of Nanoscopic Electrocatalyst/Semiconductor Interfaces under Solar Water Splitting Conditions

The materials that are receiving the most attention in photoelectrochemical water splitting are metallic nanoparticle electrocatalysts (np-EC) attached to the surface of a semiconductor (SC) light absorber. In these multicomponent systems, the interface between the semiconductor and electrocatalysts critically affects performance. However, the np-EC/SC interface remains poorly understood as it is complex on atomic scales, dynamic under reaction conditions, and inaccessible to direct experimental probes. This contribution sheds light on how the electrocatalyst/semiconductor interface evolves under reaction conditions by investigating the behavior of nickel electrocatalysts (as nanoparticles and films) deposited on silicon semiconductors. Rigorous electrochemical experiments, interfacial atomistic characterization, and computational modeling are combined to demonstrate critical links between the atomistic features of the interface and the overall performance. It is shown that electrolyte-induced atomistic changes to the interface lead to (1) modulation of the charge carrier fluxes and a dramatic decrease in the electron/hole recombination rates and (2) a change in the barrier height of the interface. Additionally, the critical roles of nonidealities and electrocatalyst coverage due to interfacial geometry are explored. Each of these factors must be considered to optimize the design of metal/semiconductor interfaces which are broadly applicable to photoelectrocatalysis and photovoltaic research.

36 MATERIALS SCIENCE↗

Atomic dynamics of electrified solid–liquid interfaces in liquid-cell TEM

Electrified solid–liquid interfaces (ESLIs) play a key role in various electrochemical processes relevant to energy, biology and geochemistry. The electron and mass transport at the electrified interfaces may result in structural modifications that markedly influence the reaction pathways. For example, electrocatalyst surface restructuring during reactions can substantially affect the catalysis mechanisms and reaction products. Despite its importance, direct probing the atomic dynamics of solid–liquid interfaces under electric biasing is challenging owing to the nature of being buried in liquid electrolytes and the limited spatial resolution of current techniques for in situ imaging through liquids. Here, with our development of advanced polymer electrochemical liquid cells for transmission electron microscopy (TEM), we are able to directly monitor the atomic dynamics of ESLIs during copper (Cu)-catalysed CO 2 electroreduction reactions (CO 2 ERs). Our observation reveals a fluctuating liquid-like amorphous interphase. It undergoes reversible crystalline–amorphous structural transformations and flows along the electrified Cu surface, thus mediating the crystalline Cu surface restructuring and mass loss through the interphase layer. Furthermore, the combination of real-time observation and theoretical calculations unveils an amorphization-mediated restructuring mechanism resulting from charge-activated surface reactions with the electrolyte. Our results open many opportunities to explore the atomic dynamics and its impact in broad systems involving ESLIs by taking advantage of the in situ imaging capability.

36 MATERIALS SCIENCE↗

Mars Sample Return, Sample Retrieval Lander, Reaction Control System Jet Interaction Supersonic Wind Tunnel Test Overview with CFD Predictions

NASA's Mars Sample Return campaign will be launching several missions over the next decade that will work together to return rock samples from Mars back to Earth. The Sample Retrieval Lander (SRL) will deliver the Mars Ascent Vehicle and fetch rover to the surface of Mars in 2006. Rock samples collected by the Mars 2020 Perseverance rover, landing in early 2021, will be loaded on the the ascent vehicle to be launched into Mars orbit for retrieval by yet another spacecraft. The Sample Retrieval Lander will be a blunt entry capsule similar to past Mars entry vehicles like Mars Science Laboratory and Viking. The vehicle will fly a guided entry, using a small lift vector produced by a non-zero trim angle of attack to eliminate downrange and crossrange position errors at the point of parachute deploy. This energy and heading management is achieved with a reaction control system (RCS) that directs the bank angle of the vehicle and also minimizes unwanted capsule dynamics. The reaction control system and control design is based on the Mars Science Laboratory and Mars 2020 RCS systems. However, due to packaging constraints, the backshell of this new entry vehicle has a different geometry than those earlier designs. To certify the RCS system for flight the project must characterize the jet plume interactions with the capsule backshell that could impair or significantly augment the RCS control authority. This characterization will be done through a combination of computational fluid dynamics (CFD) analysis and wind tunnel test. Two candidate arrangements of the RCS jets have been identified for the SRL vehicle and are currently under evaluation before final selection. The aero/RCS plume interactions of these candidate configurations have been measured in a supersonic wind tunnel test in NASA Langley's Unitary Plan Wind Tunnel. The test was conducted in the fall of 2020 and data is currently being reduced. An overview of the candidate RCS configurations are presented here with an overview of the wind tunnel model design, jet scaling and scaled nozzle design, and the test matrix. Preliminary CFD runs are presented with an assessment of the predicted plumes and their interaction with the wake flow of the vehicle. The predicted effects of the model sting is provided as well. This high fidelity wind tunnel test is being conducted much earlier in the SRL project than would normally be done. The test was funded as part of a CFD evaluation task funded by NASA's Aerosciences Evaluation and Test Capabilities Project. The objective of the evaluation task was to compare the ability of CFD to predict complex flows with data that can be measured in the Langley Unitary Plan Wind Tunnel. RCS Jet interactions were selected as a type of complex flow that is important to NASA missions. In addition to providing useful data to the SRL project, there was added emphasis on quantifying the accuracy of the CFD predictions and wind tunnel test data. An overview of the uncertainty quantification methodologies for computational and experimental portions of this test is presented.

blunt body↗

Natural hot-ion modes in a rotating plasma

We report that in steady state, the fuel cycle of a fusion plasma requires inward particle fluxes of fuel ions. These particle flows are also accompanied by heating. In the case of classical transport in a rotating cylindrical plasma, this heating can proceed through several distinct channels depending on the physical mechanisms involved. Some channels directly heat the fuel ions themselves, whereas others heat electrons. Which channel dominates depends, in general, on the details of the temperature, density and rotation profiles of the plasma constituents. However, remarkably, under relatively few assumptions concerning these profiles, if the α particles, the by-products of the fusion reaction, can be removed directly by other means, then a hot-ion mode tends to emerge naturally.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

State Space Truncation with Quantified Errors for Accurate Solutions to Discrete Chemical Master Equation

The discrete chemical master equation (dCME) provides a general framework for studying stochasticity in mesoscopic reaction networks. Since its direct solution rapidly becomes intractable due to the increasing size of the state space, truncation of the state space is necessary for solving most dCMEs. It is therefore important to assess the consequences of state space truncations so errors can be quantified and minimized. Here we describe a novel method for state space truncation. By partitioning a reaction network into multiple molecular equivalence groups (MEGs), we truncate the state space by limiting the total molecular copy numbers in each MEG. We further describe a theoretical framework for analysis of the truncation error in the steady-state probability landscape using reflecting boundaries. By aggregating the state space based on the usage of a MEG and constructing an aggregated Markov process, we show that the truncation error of a MEG can be asymptotically bounded by the probability of states on the reflecting boundary of the MEG. Furthermore, truncating states of an arbitrary MEG will not undermine the estimated error of truncating any other MEGs. We then provide an overall error estimate for networks with multiple MEGs. To rapidly determine the appropriate size of an arbitrary MEG, we also introduce an a priori method to estimate the upper bound of its truncation error. This a priori estimate can be rapidly computed from reaction rates of the network, without the need of costly trial solutions of the dCME. As examples, we show results of applying our methods to the four stochastic networks of (1) the birth and death model, (2) the single gene expression model, (3) the genetic toggle switch model, and (4) the phage lambda bistable epigenetic switch model. We demonstrate how truncation errors and steady-state probability landscapes can be computed using different sizes of the MEG(s) and how the results validate our theories. Overall, the novel state space truncation and error analysis methods developed here can be used to ensure accurate direct solutions to the dCME for a large number of stochastic networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

N-Terminal Decarboxylation as a Probe for Intramolecular Contact Formation in $γ$-Glu-(Pro) n -Met Peptides

The kinetics of intramolecular-contact formation between remote functional groups in peptides with restricted conformational flexibility were examined using designed peptides with variable-length proline bridges. As probes for this motion, free radicals were produced using the • OH-induced oxidation at the C-terminal methionine residue of γ-Glu-(Pro) n -Met peptides ( n = 0–3). The progress of the radicals’ motion along the proline bridges was monitored as the radicals underwent reactions along the peptides’ backbones. Of particular interest was the reaction between the sulfur atom located in the side chain of the oxidized Met residue and the unprotonated amino group of the glutamic acid moiety. Interactions between them were probed by the radiation-chemical yields (expressed as G values) of the formation of C-centered, α-aminoalkyl radicals (αN) on the Glu residue. These radicals were monitored directly or via their reaction with p -nitroacetophenone (PNAP) to generate the optically detected PNAP •– radical anions. The yields of these αN radicals were found to be linearly dependent on the number of Pro residues. A constant decrease by 0.09 μM J –1 per spacing Pro residue of the radiation-chemical yields of G (αN) was observed. Previous reports support the conclusion that the αN radicals in these cases would have to result from (S$\therefore$N) + -bonded cyclic radical cations that arose as a result from direct contact between the ends of the peptides. Furthermore, by analogy with the rate constants for the formation of intramolecularly (S$\therefore$S) + -bonded radical cations in Met-(Pro) n -Met peptides ( J. Phys. Chem. B 2016 , 120 , 9732), the rate constants for the formation of intramolecularly (S$\therefore$N) + -bonded radical cations are activated to the same extent for all of the γ-Glu-(Pro) n -Met peptides. Thus, the continuous decrease of G (αN) with the number of Pro residues (from 0 to 3) suggests that the formation of a contact between the S-atom in the C-terminal Met residue and the N-atom of a deprotonated N-terminal amino group of Glu is controlled in peptides with 0 to 3 Pro residues by the relative diffusion of the S •+ and unoxidized N-atom. The overall rate constants of cyclization to form the (S$\therefore$N)-bonded radical cations were estimated to be 3.8 × 10 6 , 1.8 × 10 6 , and 8.1 × 10 5 s –1 for peptides with n = 0, 1, and 2 Pro residues, respectively. If activation is the same for all of the peptides, then these rate constants are a direct indication for the end-to-end dynamics along the chain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural transformations and kinetics of high-temperature heterogeneous gasless reactions by high-speed x-ray phase-contrast imaging

Heterogeneous gasless reactive systems, including high-energy density metal-nonmetal compositions, have seen increasing study due to their various applications. However, owing to their high reaction temperature, short reaction time, and small scale of heterogeneity, investigation of their reaction mechanisms and kinetics is very difficult. In this study, microstructural changes and the kinetics of product layer growth in the W-Si system was investigated using a high-speed x-ray phase-contrast imaging technique. Using the Advanced Photon Source of Argonne National Laboratory, this method allowed direct imaging of irreversible reactions in the W-Si reactive system at frame rates up to 36 000 frames per second with 4 {mu}s exposure and spatial resolution of 10 {mu}m. Details of the Si melt and reactions between W and Si, that are unable to be viewed with visible-light imaging, were revealed. These include processes such as the initiation of nucleated melting and other physical phenomena that provide insight into the mixing of reactants and subsequent reaction. Through the use of this imaging technique and future optimization in the imaging process, a model for accurately identifying kinetics of chemical reactions, both spatially and temporally, is also proposed.

36 MATERIALS SCIENCE↗