Search NASA⌕ Search

SEARCH · Search NASA

Results for “Design Parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Thickness and orientational design for a maximum stiff membrane

Recent results from sensitivity analysis for strain energy with anisotropic elasticity are applied to thickness and orientational design of laminated membranes. Primarily, the first order gradients of the total elastic energy are used in an optimality criteria based method. This traditional method is shown to give slow convergence with respect to design parameters, although the convergence of strain energy is very good. To get a deeper insight into this rather general characteristic, second order derivatives are included and it is shown how they can be obtained by first order sensitivity analysis. Examples of only thickness design, only orientational design, and combined thickness--orientational design are presented.

Pedersen, Pauli↗

Multidisciplinary Optimization of A Transonic Truss-Braced Wing Aircraft Using Aviary

The continuous push to decrease fuel burn of single-aisle commercial aircraft has led to interest in a Transonic Truss-Braced Wing (TTBW) concept vehicle. Sporting high-slung wings that are long and slender to increase aerodynamic efficiency, a TTBW can also accommodate higher-bypass turbine engines. The combination of these two changes potentially leads to an overall decrease in fuel consumption. In this paper, a TTBW concept vehicle is assembled in the Aviary open-source tool for conceptual aircraft design. The conceptual-level aerodynamics and propulsion systems that come prepackaged with Aviary are replaced with higher-fidelity vortex lattice method for aerodynamics (VSPAERO) and a one-dimensional cycle analysis tool for propulsion (pyCycle). The vehicle is then optimized to minimize fuel burn for a representative commercial mission. Design parameters for the vehicle include the electrified turbine size, the size of the electric motors which are used for takeoff and climb assist, and battery capacity. The TTBW concept vehicle presented in this paper represents the first application of Aviary to an aircraft design problem.

Optimization↗

ASME Section III, Division 5, High Temperature Reactors

Section III, Division 5 stands ready to support near-term deployment of advanced reactors. Progress on improving design rules, extending design lifetimes, adding more materials, and adding advanced component fabrication methods. Lessons-learned from Alloy 617 Code Case effort have streamlined the balloting workflow for Class A material code cases. After requester submitted material design parameters and supporting data package to ASME, Division 5 could turn around a material code case in about three Code Week cycles (less than a year). Data requirements for new materials are described in Division 5, “Nonmandatory Appendix HBB-Y, Guidelines For Design Data Needs For New Materials”.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An efficient optimization of well placement and control for a geothermal prospect under geological uncertainty

This work applies an efficient optimization technique based on a multivariate adaptive regression spline (MARS) technique to determine the optimal design and engineering of a potential geothermal production operation at a prospect near Superstition Mountain in Southern California, USA. The faster MARS-based statistical model is used as a surrogate for higher-fidelity physical models within the intensive optimization process. Its use allows for the exploration of the impacts of specific engineering design parameters in the context of geologic uncertainty as a means to both understand and maximize profitability of the production operation. The MARS model is initially developed from a training dataset generated by a finite set of computationally complex hydrothermal models applied to the prospect. Its application reveals that the optimal engineering design variables can differ considerably assuming different choices of hydrothermal flow properties, which, in turn, indicates the importance of reducing the uncertainty of key geologic properties. The major uncertainty sources in the natural-system are identified and ranked first by an efficient MARS-enabled total order sensitivity quantification, which is then used to assist evaluating the effect of geological uncertainties on optimized results. At the Southern California prospect, this parameter sensitivity analysis suggests that groundwater circulation through high permeable structures, rather than heat conduction through impermeable granite, is the primary heat transfer method during geothermal extraction. Reservoir histories simulated using optimal parameters with different constraints are analyzed and compared to investigate the longevity and maximum profit of the geothermal resources. The comparison shows that the longevity and profit are very likely to be overestimated by optimizations without appropriate constraints on natural conditions. In addition to geothermal energy production, this optimization approach can also be used to manage other geologic resource operations, such as hydrocarbon production or CO 2 sequestration, under uncertain reservoir conditions.

15 GEOTHERMAL ENERGY↗

Simulation of Thematic Mapper performance as a function of sensor scanning parameters

The investigation and results of the Thematic Mapper Instrument Performance Study are described. The Thematic Mapper is the advanced multispectral scanner initially planned for the Earth Observation Satellite and now planned for LANDSAT D. The use of existing digital airborne scanner data obtained with the Modular Multispectral Scanner (M2S) at Bendix provided an opportunity to simulate the effects of variation of design parameters of the Thematic Mapper. Analysis and processing of this data on the Bendix Multispectral Data Analysis System were used to empirically determine categorization performance on data generated with variations of the sampling period and scan overlap parameters of the Thematic Mapper. The Bendix M2S data, with a 2.5 milliradian instantaneous field of view and a spatial resolution (pixel size) of 10-m from 13,000 ft altitude, allowed a direct simulation of Thematic Mapper data with a 30-m resolution. The flight data chosen were obtained on 30 June 1973 over agricultural test sites in Indiana.

Johnson, R. H.↗

Many routes to ferroelectric HfO 2 : A review of current deposition methods

Although 10 years have passed since the initial report of ferroelectricity in hafnia (HfO 2 ), researchers are still intensely fascinated by this material system and the promise it holds for future applications. A wide variety of deposition methods have been deployed to create ferroelectric HfO 2 thin films such as atomic layer deposition, chemical solution deposition, and physical vapor deposition methods such as sputtering and pulsed laser deposition. Process and design parameters such as deposition temperature, precursor choice, target source, vacuum level, reactive gases, substrate strain, and many others are often integral in stabilizing the polar orthorhombic phase and ferroelectricity. We examine processing parameters across four main different deposition methods and their effect on film microstructure, phase evolution, defect concentration, and resultant electrical properties. The goal of this review is to integrate the process knowledge collected over the past 10 years in the field of ferroelectric HfO 2 into a single comprehensive guide for the design of future HfO 2 -based ferroelectric materials and devices.

36 MATERIALS SCIENCE↗

Compact toroidal ion-trap design and optimization

We present the design of a type of compact toroidal, or 'halo', ion trap. Such traps may be useful for mass spectrometry, studying small Coulomb cluster rings, quantum-information applications, or other quantum simulations where a ring topology is of interest. We present results from a Monte Carlo optimization of the trap design parameters using finite-element analysis simulations that minimize higher-order anharmonic terms in the trapping pseudopotential, while maintaining complete control over ion placement at the pseudopotential node in three dimensions using static bias fields. These simulations are based on a practical electrode design using readily available parts, yet can be easily scaled to any size trap with similar electrode spacings. We also derive the conditions for a crystal structure transition for two ions in the compact halo trap, the first nontrivial transition for Coulomb crystals in this geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Habitability design elements for a space station

Habitability in space refers to the components, characteristics, conditions, and design parameters that go beyond but include the basic life sustaining requirements. Elements of habitability covered include internal environment, architecture, mobility and restraint, food, clothing, personal hygiene, housekeeping, communications, and crew activities. All elements are interrelated and need to be treated as an overall discipline. Designing for a space station is similar to designing on earth but with 'space rules' instead of ground rules. It is concluded that some habitability problems require behavioral science solutions.

Dalton, M. C.↗

Combined design of structures and controllers for optimal maneuverability

Approaches to the combined design of structures and controllers for achieving optimal maneuverability are presented. A maneuverability index which directly reflects the minimum time required to perform a given set of maneuvers is introduced. By designing the flexible appendages, the maneuver time of the spacecraft is minimized under the constraints of structural properties, and post maneuver spillover is kept within a specified bound. The spillover reduction is achieved by making use of an appropriate reduced order model. The distributed parameter design problem is approached using assumed shape functions, and finite element analysis with dynamic reduction. Solution procedures have been investigated. Approximate design methods have been developed to overcome the computational difficulties. Some new constraints on the modal frequencies of the spacecraft are introduced in the original optimization problem to facilitate the solution process. It is shown that the global optimal design may be obtained by tuning the natural frequencies to satisfy specific constraints. Researchers quantify the difference between a lower bound to the solution for maneuver time associated with the original problem and the estimate obtained from the modified problem, for a specified application requirement. Numerical examples are presented to demonstrate the capability of this approach.

Ling, Jer↗

Distributed Wind Aeroelastic Modeling (dWAM)

Aeroelastic modeling is the primary method for the structural and performance assessment of any wind turbine. These tools provide an understanding of the impact of design parameters on turbine loading and power response before operating in the field. Despite these advantages, the use of aeroelastic modeling in the distributed wind energy industry is limited. This project aims to improve the aeroelastic modeling tools for distributed wind turbines to enable the design and certification of optimized turbine technology with a competitive cost of energy.

aeroelastic modeling tools↗

A novel machine learning-based optimization algorithm (ActivO) for accelerating simulation-driven engine design

A novel design optimization approach (ActivO) that employs an ensemble of machine learning algorithms is presented. The proposed approach is a surrogate-based scheme, where the predictions of a weak leaner and a strong learner are utilized within an active learning loop. The weak learner is used to identify promising regions within the design space to explore, while the strong learner is used to determine the exact location of the optimum within promising regions. For each design iteration, exploration is done by randomly selecting evaluation points within regions where the weak learner-predicted fitness is high. The global optimum obtained by using the strong learner as a surrogate is also evaluated to enable rapid convergence once the most promising region has been identified. First, the performance of ActivO was compared against five other optimizers on a cosine mixture function with 25 local optima and one global optimum. In the second problem, the objective was to minimize indicated specific fuel consumption of a compression-ignition internal combustion (IC) engine while adhering to desired constraints associated with in-cylinder pressure and emissions. In this work, the efficacy of the proposed approach is compared to that of a genetic algorithm, which is widely used within the internal combustion engine community for engine optimization, showing that ActivO reduces the number of function evaluations needed to reach the global optimum, and thereby time-to-design by 80%. Furthermore, the optimization of engine design parameters leads to savings of around 1.9% in energy consumption, while maintaining operability and acceptable pollutant emissions.

97 MATHEMATICS AND COMPUTING↗

Initial Assessment for a Generic Horizontal Fissile Solution Vessel with an Electron Beam-based Neutron Generator

The LANL NA-23 program office has provided an extensive design study for a medical isotope (i.e. Molybdenum-99) production facility based on a fissile solution vessel with various accelerator technologies. These concept designs and associated R&D have provided affordable pathways for system optimization for industry counter partner such as SHINE and Global Medial Isotope Supply (GMIS). A horizontal fissile solution vessel design with an electron beam (E-beam) accelerator is proposed and studied with modeling capabilities developed for previous concepts (i.e. a generic vertical fissile solution vessel with a deuterium-tritium (DT) accelerator). An initial system assessment is performed by estimating theoretical Molybdenum-99 production yield with MCNP6.2. A baseline system configuration is constructed based on early design discussions between LANL and GMIS. Since only an initial design concept is available at this stage, all associated system design parameters can be adjusted to fit the best system performance characteristics. In this work, unlike previous vertical system studies, the cooling configuration of the horizontal fissile solution vessel is not considered, and only fission reactions are used to quantify the theoretical product yield. Five parametric design studies are proposed, preliminary results are briefly reported, and extended design studies beyond what is proposed here are also discussed. It is concluded that a comprehensive system analysis via multiphysics coupled calculation developed by LANL should be further conducted for the final design.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Establishment of a Vertically Integrated Domestic Manufacturing Process for Production of Substrates Needed for Manufacture of Gas Diffusion Layers

In this project, AvCarb, LLC evaluated the baseline performance metrics of commercial carbon veils and their corresponding Gas Diffusion Layers (GDLs) with the goal of establishing an optimized, vertically integrated production system for wet-laid nonwoven substrates used in gas diffusion media for electrochemical energy storage and conversion devices. Mechanical testing and microstructural characterization were conducted and used to develop a multiscale computational model capable of simulating and predicting the performance of GDLs in fuel cells. Although the project successfully generated foundational transport and modeling data, it was terminated prior to identifying the critical GDL design parameters necessary for full optimization. The program aimed to improve carbon veil fabrication through enhanced fiber dispersion, fiber-fiber adhesion control, and improved web formation, enabling the production of high-quality, uniform substrates. Simulations were intended to guide mixing and solution delivery system design and process conditions, followed by production-scale trials to evaluate fiber dispersion, web uniformity, and mechanical robustness. At full deployment, the proposed production line would have been capable of producing approximately 650,000 m² of carbon veil annually. This capability remains strategically important, as the United States currently lacks a domestic source of wet-laid nonwoven carbon substrates that satisfy the stringent quality requirements for fuel-cell GDLs and electrolyzers representing an ongoing supply-chain vulnerability. Beyond supply-chain benefits, the project established a robust benchmarking dataset for existing commercial carbon veils while advancing next-generation material concepts targeting improved performance and manufacturing consistency.

Olson, Cynthia Lemay↗

Feasibility Study of a Pressure-fed Engine for a Water Recoverable Space Shuttle Booster

Detailed mass properties are presented for a gimbaled, fixed thrust, regeneratively cooled engine having a coaxial pintle injector. The baseline design parameters for this engine are tabulated. Mass properties are also summarized for several other engine configurations i.e., a hinge nozzle using a Techroll seal, a gimbaled duct cooled engine and a regeneratively cooled engine using liquid injection thrust vector control (LITVC). Detailed engine analysis and design trade studies leading to the selection of a regeneratively cooled gimbaled engine and pertaining to the selection of the baseline design configuration are also given.

Gerstl, E.↗

Passive damping augmentation of flexible beam-like lattice trusses for large space structures

A Timoshenko beam continuum model is developed to determine the transient response of a beam-like latticed large space structure, subjected to a unit impulse. It is demonstrated that an increase in diagonal stiffness, on account of the stiffness of the vertical girder, leads to a rise in the transverse shear rigidity. This results in higher natural frequencies and reduction in peak displacement. In addition, in an asymmetrical truss configuration, coupling between the extensional and shear modes raises the maximum peak displacement compared with that obtained for a symmetrical truss. The model is modified to investigate the introduction of passive damping in the form of several dynamic vibration absorbers. A unique absorber parameter optimization procedure, based on the classical steady-state criteria, is used to tune the absorbers, having a total allocated mass budget of 10%, to the first two frequencies of the latticed structure. It is found that inclusion of transverse shear rigidity as a design parameter in damping augmentation studies reduces settling time for predetermined maximum peak displacements.

Cohen, K.↗

Flow-Boiling Critical Heat Flux Experiments Performed in Reduced Gravity

Poor understanding of flow boiling in microgravity has recently emerged as a key obstacle to the development of many types of power generation and advanced life support systems intended for space exploration. The critical heat flux (CHF) is perhaps the most important thermal design parameter for boiling systems involving both heatflux-controlled devices and intense heat removal. Exceeding the CHF limit can lead to permanent damage, including physical burnout of the heat-dissipating device. The importance of the CHF limit creates an urgent need to develop predictive design tools to ensure both the safe and reliable operation of a two-phase thermal management system under the reduced-gravity (like that on the Moon and Mars) and microgravity environments of space. At present, very limited information is available on flow-boiling heat transfer and the CHF under these conditions.

Hasan, Mohammad M.↗

Cylindrical battery design app

Software that delivers optimal design parameters and performance predictions for cylindrical cells, which can range in size from microbatteries to EV batteries, is developed. The software utilizes machine learning and includes a graphical user interface to enable rapid prototyping and to accelerate energy storage research, development, and manufacturing. The Cylindrical battery design V1.0 comprises of three types of cylindrical batteries, Microbattery (Primary), Microbattery (Secondary) and 18650/21700/xxxxx Cylindrical battery. The software was developed in MATLAB. The software has the capability to output the cell design with the capacity ranges from several mAh to several million Ah.

Xiao, Jie↗