Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct Processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Preparation and Characterization of Various Kraft Lignins and Impact on Their Pyrolysis Behaviors

Lignin-derived chemicals and fuel products have received much attention in the context of bio-refinery. In this study we prepared and characterized various lignin samples from black liquor (BL), a major byproduct from the pulp and paper manufacturing processes, and studied the pyrolysis behaviors of these isolated lignin samples at 600 °C under a N2 atmosphere. Three lignin samples were isolated from the Kraft pulping BL of Loblolly pine linerboard grade process (KL, obtained by direct evaporation; L10, obtained by precipitation at pH 10; L3, obtained by precipitation at pH 3), while another three were from the Kraft pulping BL of Loblolly pine bleach grade process (KB, B10, B3). The inorganic elements present in lignin samples were analyzed using an inductively coupled plasma (ICP) analyzer. The KL and KB samples contained a larger amount of inorganic elements, especially Na and S, than did the other lignin samples. Owing to large quantities of inorganic elements, the ash contents in KL and KB were higher than in the precipitated lignin samples (L10, B10, L3, and B3). These inorganic elements have a significant effect on the subsequent pyrolysis process, as a result, more extensive depolymerization of lignin occurred in KL and KB samples, leading to the formation of fewer pyrolysis oils, with lower molecular weights. NMR analyses of pyrolysis oils show that more methoxyl groups and ether bonds were cleaved, resulting in fewer methoxyl groups and aromatic C–O bonds for the KL and KB heavy oil than for the precipitated lignin heavy oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

OSU/NETL/Sandia/LBNL IDAES (CRADA Final Report)

The objective of this CRADA is to facilitate the cooperation among the Ohio State Univesity and the collaborators for the Institute for the Design of Advanced Energy Systems (IDAES). The goal is to develop, validate, and use a suite of process models based on the Ohio State's Fe-based coal direct chemical looping (CDCL) combustion process. This collaboration will provide Ohio State with a greater fundamental understanding of their chemical looping process, will help to improve the process efficiency, and will thus enable a greater probability of developing a commercial success. This collaboration will provide the IDAES team with detailed real-world process data to validate and demonstrate the effectiveness of its toolset.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1974

Study of process variables associated with manufacturing hermetically-sealed nickel-cadmium cells

A two year study of the major process variables associated with the manufacturing process for sealed, nickel-cadmium, areospace cells is summarized. Effort was directed toward identifying the major process variables associated with a manufacturing process, experimentally assessing each variable's effect, and imposing the necessary changes (optimization) and controls for the critical process variables to improve results and uniformity. A critical process variable associated with the sintered nickel plaque manufacturing process was identified as the manual forming operation. Critical process variables identified with the positive electrode impregnation/polarization process were impregnation solution temperature, free acid content, vacuum impregnation, and sintered plaque strength. Positive and negative electrodes were identified as a major source of carbonate contamination in sealed cells.

Miller, L.↗
NASA NTRS1981

Hot forming graphite/polyimide structures

Hot forming process has been developed in which structural shapes and panels are fabricated directly from stabilized graphite/polyimide preforms. Process can be used with thermosetting polymers that have high-temperature melt phase just before final cure. This phase allows fibers to move without destroying matrix-to-fiber adhesion. One of key advantages of this process is that prestages preforms are very stable and do not require refrigerated storage.

Baucom, R. M.↗
NASA NTRS2006

Using Dissimilarity Metrics to Identify Interesting Designs

A computer program helps to blend the power of automated-search software, which is able to generate large numbers of design solutions, with the insight of expert designers, who are able to identify preferred designs but do not have time to examine all the solutions. From among the many automated solutions to a given design problem, the program selects a smaller number of solutions that are worthy of scrutiny by the experts in the sense that they are sufficiently dissimilar from each other. The program makes the selection in an interactive process that involves a sequence of data-mining steps interspersed with visual displays of results of these steps to the experts. At crucial points between steps, the experts provide directives to guide the process. The program uses heuristic search techniques to identify nearly optimal design solutions and uses dissimilarity metrics defined by the experts to characterize the degree to which solutions are interestingly different. The search, data-mining, and visualization features of the program were derived from previously developed risk-management software used to support a risk-centric design methodology

Feather, Martin↗
DOE OSTI2023

Environmental Impact Assessment of Lithium Recovery from Geothermal Brines in the SS-KGRA: An Overview

There is increasing interest in securing a reliable, domestic source of lithium in the United States to support an electrified grid and energy secure future. The Salton Sea Known Geothermal Resource Area (SS-KGRA) has garnered attention for this purpose due to the abundance of lithium in brines brought to the surface for geothermal energy production in this region. Geothermal production from this field is already expected to grow from the current 400 MWe to 920 MWe in the next 3-4 years with a potential total geothermal capacity in the region estimated at nearly 2,950 MWe. With this growth, there is potential for construction and operation of new direct lithium recovery and processing facilities to meet domestic demands for lithium. In this work, we estimate the potential impact of geothermal expansion and lithium extraction in the SS-KGRA on water use, direct air emissions from facilities, and solid waste production and management.

Busse, MM↗
DOE OSTI2026

Achieving high rate performance in hybrid pristine-recycled cathodes using model-informed electrode designs

Direct recycling lithium-ion battery cathodes, a process that retains the engineered oxide structures from end-of-life materials, presents a cost-effective and energy-efficient alternative to other battery recycling methods. However, while direct-recycled cathodes have demonstrated performance comparable to that of pristine materials at low cycling rates, their high-rate performance remains uncertain. Morphology changes in cathode particles, a main mode of degradation, directly impact rate performance by limiting surface kinetics and solid-phase diffusion. If direct recycling processes do not sufficiently restore pristine-like morphologies, the recycled materials may retain structural defects that hinder high-rate performance. The present work uses a physics-based pseudo-2D model to simulate hybrid electrodes with pristine and artificially “aged/recycled” NMC materials to investigate potential impacts of incorporating performance-limited aged cathode materials into cells. The study highlights how differences in transport and kinetic properties can influence rate capabilities in mixed electrodes — particularly in high-loading cells in high-demand applications. However, model results also reveal a possible mitigation strategy via dual-layer electrode architectures with lower-performing materials positioned near the current collector. Simulations of 4.0 mAh cm −2 cells cycled at 4C using a dual-layer architecture provided approximately 5%–30% more capacity in constant-current protocols compared to homogeneously blended electrode architectures with the same loadings and mixed-material compositions. These findings highlight the importance of strategic electrode design in minimizing potential performance losses and facilitating the integration of recycled materials into high-performance batteries, advancing sustainable and cost-effective battery manufacturing.

25 ENERGY STORAGE↗
DOE OSTI2025

Rate expressions and kinetic parameters for metal ferrites in relation to applications of fossil fuel conversion to hydrogen: Part 1 of 2

Here, the goal of the present work was to provide the necessary reaction emulation information to enable detailed process simulation of a chemical looping H 2 production system from fossil fuels using CaFe 2 O 4 . This specifically pertained to the necessary kinetic data, reaction model development, and model rate parameters required for reaction emulation in both reducing and oxidizing environments. A logical methodology was defined, which included discretization of the reaction network, establishing a core model for reaction emulation that could be adapted based on the system phenomena, and development of a rate parameter regression tool designed around the core model. An extensive array of data sets was acquired by which parametric regressions were performed. The work presented and tabulated a comprehensive set of rate parameters for the reduction and oxidation reactions of CaFe 2 O 4 and descendent phases of Ca 2 Fe 2 O 5 , FeO, Fe 3 O 4 , Fe, and CaO to emulate reaction behavior in a looping-based process environment. This included direct reduction using CH 4 , H 2 , and CO, and direct oxidation reactions with steam, CO 2 and O 2 . Dynamic equilibrium was quantified for reactions that could utilize H 2 O and CO 2 as soft oxidants to re-saturate lattice oxygen in the depleted structure/phases. The kinetics associated with the oxidative mechanisms with the soft oxidants were quantified and compared to those of the reducing counterparts. The analysis provided critical insight to emulate reactions for a process that seeks to use natural gas (NG) or other fossil fuels as a direct reductant for the end goal of H 2 production.

calcium ferrite oxygen carriers↗
DOE OSTI2023

Design, modeling and simulation of nuclear-powered integrated energy systems with cascaded heating applications

Nuclear-renewable integrated energy systems (IES) consist of a variety of energy generation and conversion technologies and can be used to meet heterogeneous end uses (e.g., electricity, heat, and cooling demands). In addition to supply-demand balance, end-use heat demands usually require heat supply of certain temperature ranges. The effective and efficient utilization of heat produced within an IES is, therefore, a critical challenge. Here, this paper examines design options of an IES that includes heating processes of multiple temperature grades. We investigate a cascaded design configuration, where the remaining residual heat after high-grade heating processes [e.g., hydrogen production through high-temperature steam electrolysis (HTSE)] is recovered to meet the low-grade heating needs [e.g., district heating (DH)]. Additionally, a thermal energy storage system is integrated into the DH system to address the imbalance between heat supply and demand. This paper primarily focuses on the design and modeling of the proposed system and evaluates its operation with a 24-h transient process simulation using a DH demand profile with hourly resolution. The results indicate that the residual heat from the HTSE exhaust is insufficient for the DH demand, and additional topping heat directly from the reactor process steam is needed. Furthermore, the inclusion of thermal energy storage within the DH system provides the necessary balance between thermal generation and demand, thereby ensuring a consistent rated temperature of the DH supply water. This approach helps minimize the control actions needed on the reactor side.

08 HYDROGEN↗
DOE OSTI2023

Hybrid Al Casting + AM Components for Automotive Applications

Although casting Aluminum (Al) alloys is widely used for automotive application, the conventional casting process is showing limitations for modern vehicle production. A hybrid manufacturing method that is capable of fabricating automotive structures with tailored functionality and tuned attributes at a high production rate is proposed in this project, utilizing the merits of conventional casting methods and additive manufacturing (AM) methods. Ford is interested in supplementing conventional casting processes (e.g., shape casting, high pressure die casting) with local modifications to geometry and microstructure using additive manufacturing techniques. Two additive manufacturing methods, wire-arc and laser hot-wire directed energy deposition AM process, were evaluated by deposition of 4043 filler wire onto high-pressure die cast and permanent mold cast Al-Si alloys. The feasibility of this hybrid manufacturing method was determined through trial deposition and evaluation of defects, microstructure, and mechanical properties. Laser hot-wire deposition was found to be beneficial for this application with low porosity, a refined microstructure, and mechanical properties similar to those reported in the literature for 4043. The mechanical properties of the interface between the A356 casting and deposited 4043 were found to be controlled by the weaker deposit material.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Innovative Design and Manufacturing of 2.5D Battery with High Energy and Power Density (Final Report)

The goal of this project is to develop cathode inks, to be used in additive manufacturing (AM), that lead to a low-cost, fast manufacturing processes for a new type of non-planar, 2.5D lithium-ion battery (LIB). 2.5D batteries, comprised of a high-aspect-ratio 3D electrode combined with a 2D planar electrode, can simplify the fabrication process because there is no need for the alignment steps seen in traditional 3D batteries. For the success of the two AM processes identified in this project, development of cathode inks is key component because it allows for both platforms to be evaluated in achieving high performance batteries and ease of manufacturing. The two AM processes explored in this project are direct ink writing (DIW) and templating. Both of these processes have been shown to be successful in depositing materials for traditional LIBs and will be used now for the 3D array electrode configuration as part of the 2.5D battery.

25 ENERGY STORAGE↗
NASA NTRS1994

(abstract) Application of Neural Networks to Hyperspectral Unmixing

The emergence, in recent years, of hyperspectral sensors provides a tremendous opportunity for advancing the process of detailed and direct remote detection and identification from space of targets or surface materials. Such sensors exploit the uniqueness of the corresponding spectral reflectance signatures, which enables high resolution imaging spectrometer data to be processed on a pixel-by-pixel basis. This has implications both for defense-related applications (e.g., surveillance tasks) and in the civilian domain (e.g., for science applications). The purpose of this talk is to discuss a number of strong arguments that support neural networks as a choice for the generalized analysis (e.g., unmixing) of remotely sensed hyperspectral data.

signatures moving object detection surveillance co↗
DOE OSTI2019

Direct determination of mode-projected electron-phonon coupling in the time domain

Ultrafast spectroscopies have become an important tool for elucidating the microscopic description and dynamical properties of quantum materials. In particular, by tracking the dynamics of nonthermal electrons, a material’s dominant scattering processes can be revealed. In this paper, we present a method for extracting the electron-phonon coupling strength in the time domain, using time- and angle-resolved photoemission spectroscopy (TR-ARPES). This method is demonstrated in graphite, where we investigate the dynamics of photoinjected electrons at the $\overline{K}$ point, detecting quantized energy-loss processes that correspond to the emission of strongly coupled optical phonons. We show that the observed characteristic time scale for spectral weight transfer mediated by phonon-scattering processes allows for the direct quantitative extraction of electron-phonon matrix elements for specific modes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1967

Continued investigation of solid propulsion economics. Task 1B: Large solid rocket motor case fabrication methods - Supplement process complexity factor cost technique

This supplement to Task lB-Large Solid Rocket Motor Case Fabrication Methods supplies additional supporting cost data and discusses in detail the methodology that was applied to the task. For the case elements studied, the cost was found to be directly proportional to the Process Complexity Factor (PCF). The PCF was obtained for each element by identifying unit processes that are common to the elements and their alternative manufacturing routes, by assigning a weight to each unit process, and by summing the weighted counts. In three instances of actual manufacture, the actual cost per pound equaled the cost estimate based on PCF per pound, but this supplement, recognizes that the methodology is of limited, rather than general, application.

Baird, J.↗
DOE OSTI2021

Fundamental Processes and Practical Considerations of Lead Chalcogenide Mesocrystals Formed via Self-Assembly and Directed Attachment of Nanocrystals at a Fluid Interface

Significant advances in the synthesis and processing of colloidal nanocrystals have given scientists and engineers access to a vast library of building blocks with precisely defined size, shape, and composition. These materials have inspired exciting prospects to enable bottom-up fabrication of programmable materials with properties by design. Successfully assembling and connecting the building blocks into superstructures in which constituent nanocrystals can purposefully interact requires robust understanding of and control over a complex interplay of dynamic physicochemical processes. Fluid interfaces provide an advantageous experimental workbench to both probe and control these processes. Despite the ostensible simplicity of fabricating nanocrystal assemblies at a fluid interface, sensitivity to processing conditions and limited reproducibility have underscored the complexity of this process. In situ studies have provided mechanistic insights into the competing dynamics of key subprocesses including solvent spreading and evaporation, superlattice formation, ligand detachment kinetics, and nanocrystal attachment. Understanding how these subprocesses influence the complex choreography of self-assembly, structure transformation, and oriented attachment processes presents a rich research challenge. In this context, we present a detailed methodology for self-assembly and attachment of lead chalcogenide nanocrystals at a liquid–gas interface as a model system for the fabrication of mono- and multilayer cubic connected superlattices. We discuss key experimental parameters such as the characteristics of the building blocks and processing conditions and detailed steps from colloidal nanocrystal injection to superlattice transfer. Furthermore, we hope that this Methods/Protocols paper will provide guidance for future advances in the exciting path toward bringing the prospect of nanocrystal-based programmable materials to fruition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

A comparison of microwave versus direct solar heating for lunar brick production

Two processing techniques considered suitable for producing bricks from lunar regolith are examined: direct solar heating and microwave heating. An analysis was performed to compare the two processes in terms of the amount of power and time required to fabricate bricks of various sizes. Microwave heating was shown to be significantly faster than solar heating for rapid production of realistic-size bricks. However, the relative simplicity of the solar collector(s) used for the solar furnace compared to the equipment necessary for microwave generation may present an economic tradeoff.

Yankee, S. J.↗
NASA NTRS2018

Nucleosynthetic Heterogeneity Controls Vanadium Isotope Variations in Bulk Chondrites

The vanadium (V) isotope composition of early solar system materials have been hypothesized to be sensitive to high energy irradiation that originated from the young Sun. Vanadium has two isotopes with masses 50 and 51 that have (51)V/(50)V ratio of approximately 410. High energy irradiation produces (50)V from various target isotopes of Ti, Cr and Fe, which would result in light V isotope compositions (expressed as delta (51)V in per mille = 1000 x (((51)V/(50)V(sub sample)/(51)V/(50)V(sub AlfaAesar)) - 1)) relative to a presumably chondritic starting composition. Recently published V isotope data for calcium aluminium inclusions (CAIs) has revealed some very negative values relative to chondrites (by almost -4 per mille) that were indeed interpreted to reflect irradiation processes despite the fact that the studied CAIs all exhibited significant initial abundances of (10)Be, while only a few CAIs displayed light V isotope compositions. It is difficult to relate V isotope variations directly to a singular process because V only possesses two isotopes. Therefore, V isotope variations can principally be produced both mass dependent and independent processes. Mass dependent kinetic stable isotope fractionation is common in CAIs for refractory elements due to partial condensation/evaporation processes. The element strontium (Sr) has an almost identical condensation temperature to V and studies of stable Sr isotope compositions in CAIs reveal both heavy and light values relative to chondrites of several permil. These variations are similar in magnitude to those reported for V isotopes in CAIs, which suggests it is possible that some of the V isotope variation in CAIs could be due to kinetic stable isotope fractionation during condensation/evaporation processes.

Nielsen, S. G.↗
DOE OSTI2018

Exit Flow Field of Methane-Fueld Rotating Detonation Engine Measured by Time Resolved Particle Image Velocimetry

Pressure gain combustion (PGC) seeks to convert fuel’s chemical energy simultaneously into thermal energy and mechanical energy, thereby reducing the entropy production in the process. Recent research has shown that the rotating detonation combustion or combustor (RDC) can provide excellent specific thrust, specific impulse, and large pressure gain through rapid energy release by continuous detonation in the circumferential direction. However, few past studies have employed fuels relevant to power generation gas turbines, since RDC research has focused mainly on aerospace applications. In this study, we present experimental results from RDC operated on methane and oxygen-enriched air to represent reactants used in gas turbines for land-based power generation. The RDC is operated at high pressures by placing a back-pressure plate downstream of the annular combustor. We apply time-resolved particle image velocimetry (PIV) technique, for the first time, to quantify the RDC exit flow at framing rate of 30 kHz. Results show that even though the exit flow is dominantly axial, a significant circumferential velocity component is also present, highlighting the need to condition the flow between RDE exit and turbine inlet. The flow field undergoes cyclic fluctuations, and the key features of the flow field repeat during each cycle. Interestingly, the circumferential velocity shows a reversal in the direction during the cyclic process. Results also show noticeable cycle-to-cycle variations, related to changes in the detonation wave speed, ultimately caused by the rapid fuel-air mixing process at the RDC inlet prior to detonation.

03 NATURAL GAS↗