Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Intensive Processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Nuclear astrophysics with intense photon beam

Quasi-monochromatic photon beams generated by inverse Compton scattering of laser light with high energy electrons can be used for precise measurements of photoneutrons and resonant scattered {gamma} rays. Extremely high intensity and small energy spreading width of the photon beam expected at the ELI Nuclear Physics facility would increase the experimental sensitivities considerably. Possible photonuclear reaction measurements relevant to the p-process nucleosynthesis are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Four-photon parametric mixing and interaction between filaments

Recently energy exchange between two filaments crossing at small angle and with power slightly above the critical for self-focusing P{sub cr} was experimentally demonstrated. In this paper we present a model describing the process of this transfer through degenerate four-photon parametric mixing. Our model confirms the experimental results that the direction of energy exchange depends on the relative transverse velocity (incident angle), laser intensity and initial distance between the pulses (relative initial phase)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cascade random-quasi-phase-matched harmonic generation in polycrystalline ZnSe

Here, we experimentally and numerically investigated the cascade random-quasi-phase-matched harmonic generation in polycrystalline zinc selenide with tightly focused mid-infrared nanosecond laser pulses. We observed a sharp transition between two distinct intensity scaling regimes as a function of pump energy from sub I N to super I N , where I is the pump intensity and N is the harmonic order. To gain an understanding of the observations of this complex nonlinear process, we carried out simulations of the coupled three-wave mixing equations with random grain sizes and orientations. We found a grain size dependence of the effective phase-matching condition, suggesting that manipulation of grain size can be an effective pathway to phase-matching optimization. This approach may provide a framework for effectively enhancing high harmonic generation and other wave mixing effects in polycrystalline materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of low-temperature annealing on photoluminescence of silicon nanocluster structures

Experimental data on the photoluminescence spectra of Si nanocluster structures obtained after high-temperature annealing (1150 deg. C) of SiO{sub x} films deposited onto Si and subsequent low-temperature annealing of the films at the temperature 450 deg. C in different ambient are reported. It is shown that the photoluminescence intensity substantially increases after low-temperature annealing and the most-pronounced effect is observed after annealing in the oxygen-nitrogen mixture. In this case, the photoluminescence spectrum is shifted to longer wavelengths and shaped as a broad band with a peak around 800 nm. The processes responsible for the increase in the PL intensity on low-temperature annealing in the oxygen-nitrogen mixture are defined by reconstruction of the Si/SiO{sub 2} interfaces and by energy levels formed at the interfaces and involved in recombination of nonequilibrium charge carriers. The quasichemical reactions that bring about the formation of such levels involve oxygen and nitrogen atoms, and the centers, at which the reactions are initiated, are unsaturated valence bonds at the interfaces between Si nanoclusters and the SiO{sub 2} matrix.

36 MATERIALS SCIENCE↗

Experimental Unevaluated Nuclear Data List (XUNDL)

Contains nuclear structure and decay data from published articles. Data include nuclear level properties, such as energy, half-life, decay modes, spin and parity, as well as energy and intensity for radiation types such as gammas, alphas, betas and neutrons. For articles published in Physical Review C and the European Physical Journal, compilation takes place during the article submission process. Data from approximately 250 articles are added per year. All the compilation effort is supported by the US Nuclear Data Program and coordinated by the National Nuclear Data Center at Brookhaven National Laboratory, which is also responsible for its web dissemination.

Basic Nuclear Research, nuclear structure and deca↗

Solid Phase Processing at the Extreme

The effective application of high-flow-stress materials in the realm of Solid Phase Processing frequently necessitates operating at elevated temperatures and substantially high force. These rigorous processing conditions give rise to intricate predicaments concerning the durability of the tools and dies involved, as well as the efficient utilization of process energy. This project is centered on the investigation of the fundamental scientific aspects inherent to these challenges. We aim to delve into the details of how materials react when subjected to intense shear forces at die interfaces, determine the metallurgical interactions occurring at the interfaces with the dies, and investigate the consequences of extreme temperatures on material flow, microstructural evolution, and resultant properties.

36 MATERIALS SCIENCE↗

Collisionless coupling in the AMPTE artificial comet

Analysis of previously reported observations of the solar wind-barium interaction associated with the AMPTE artificial comet release of Dec. 27, 1984, is presented. On the basis of these results it is argued that solar wind couples momentum (and energy) to the barium ions through both laminar and turbulent processes. The laminar forces acting on the particles are the laminar electric and magnetic fields; the turbulent forces are associated with the intense electrostatic wave activity. This wave activity is shown to be caused by a cross-field solar wind proton-barium ion streaming instability. The observed wave frequencies and saturated amplitudes are consistent with the theoretical analysis.

Papadopoulos, K.↗

Energetic and magnetosheath energy particle signatures of the low-latitude boundary layer at low altitudes near noon

The low-latitude boundary layer (LBL) and its separation from the cusp have previously been identified using observations of particle precipitation at magnetosheath energies. Using S3-3 satellite observations, we have determined that these identifications can also be made from energetic particle observations on polar-orbiting satellites. It is found that the equatorward boundary of the LBL is identifiable as an approximately discontinuous decrease in 33-keV electron fluxes from low to high latitudes. Both the energetic ion and electron fluxes decrease discontinuously at the boundary between the LBL and the cusp or polar cap. A distinct LBL is nearly always identifiable in energetic particle measurements in the 10-14 MLT region when counting rates are statistically significant. The identifications obtained using the energetic particle measurements have been compared to those obtained using criteria developed by Newell and Meng (1988, 1989) for magnetosheath energy particle precipitation. In this way, we have evaluated the accuracy of both techniques and used the energetic particle measurements to supplement the identifications obtained using the Newell and Meng criteria. We propose that the Newell and Meng threshold on ion energy flux can be reduced by a factor of 6. This modification provides identification of the LBL for lower ion intensity levels than has previously been thought possible. Source, acceleration, and scattering processes have also been studied within and in the vicinity of the LBL. Observed trapped pitch angle distributions of energetic electrons imply that the LBL is at least partially on closed field lines. Strong scattering of energetic protons is found within and equatorward of the LBL and thus must occur at least partially along closed field lines. Field-aligned electron acceleration by parallel electric fields can be discerned within and poleward of the LBL, but a more detailed analysis is necessary for a statistical study. Conical ion acceleration was seen relatively frequently within the LBL and about half as often poleward of the LBL. Neither acceleration process could be identified anywhere equatorward of the LBL.

Roeder, J. L.↗

Comparing Scales of Environmental Effects from Gasoline and Ethanol Production

Understanding the environmental effects of alternative fuel production is critical to characterizing the sustainability of energy resources to inform policy and regulatory decisions. The magnitudes of these environmental effects vary according to the intensity and scale of fuel production along each step of the supply chain. We compare the scales (i.e., spatial extent and temporal duration) of ethanol and gasoline production processes and environmental effects based on a literature review, and then synthesize the scale differences on space-time diagrams. Comprehensive assessment of any fuel-production system is a moving target, and our analysis shows that decisions regarding the selection of spatial and temporal boundaries of analysis have tremendous influences on the comparisons. Effects that strongly differentiate gasoline and ethanol supply chains in terms of scale are associated with when and where energy resources are formed and how they are extracted. Although both gasoline and ethanol production may result in negative environmental effects, this study indicates that ethanol production traced through a supply chain may impact less area and result in more easily reversed effects of a shorter duration than gasoline production.

biofuel↗

Non-Loudon-Fleury Raman scattering in spin-orbit coupled Mott insulators

In this work we revisit the theory of magnetic Raman scattering in Mott insulators with strong spin-orbit coupling, with a major focus on Kitaev materials. We show that Kitaev materials with bond-anisotropic interactions are generally expected to show both one- and two-magnon responses. It is further shown that, in order to obtain the correct leading contributions to the Raman vertex operator R, one must take into account the precise, photon-assisted microscopic hopping processes of the electrons and that, in systems with multiple hopping paths, R contains terms beyond those appearing in the traditional Loudon-Fleury theory. Most saliently, a numerical implementation of the revised formalism to the case of the three-dimensional hyperhoneycomb Kitaev material β– Li 2 Ir O 3 reveals that the non-Loudon-Fleury scattering terms actually dominate the Raman intensity. In addition, they induce a qualitative modification of the polarization dependence, including, e.g., the emergence of a sharp one-magnon peak at low energies, which is not expected in the traditional Loudon-Fleury theory. This peak is shown to arise from microscopic photon-assisted tunneling processes that are of similar type with the ones leading to the symmetric off-diagonal interaction Γ (known to be present in many Kitaev materials), but take the form of a bond-directional magnetic dipole term in the Raman vertex. These results are expected to apply across all Kitaev materials and mark a drastic change of paradigm for the understanding of Raman scattering in materials with strong spin-orbit coupling and multiple exchange paths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Step towards Energy Efficient Computing: Redesigning a Hydrodynamic Application on CPU-GPU, In: 2014 IEEE 28th International Parallel and Distributed Processing Symposium

Power and energy consumption are becoming an increasing concern in high performance computing. Compared to multi-core CPUs, GPUs have a much better performance per watt. In this paper we discuss efforts to redesign the most computation intensive parts of BLAST, an application that solves the equations for compressible hydrodynamics with high order finite elements, using GPUs BLAST, Dobrev. In order to exploit the hardware parallelism of GPUs and achieve high performance, we implemented custom linear algebra kernels. We intensively optimized our CUDA kernels by exploiting the memory hierarchy, which exceed the vendor's library routines substantially in performance. We proposed an auto tuning technique to adapt our CUDA kernels to the orders of the finite element method. Compared to a previous base implementation, our redesign and optimization lowered the energy consumption of the GPU in two aspects: 60% less time to solution and 10% less power required. Compared to the CPU-only solution, our GPU accelerated BLAST obtained a 2.5× overall speedup and 1.42× energy efficiency (green up) using 4th order (Q_4) finite elements, and a 1.9× speedup and 1.27× green up using 2nd order (Q2) finite elements.

Computer Science↗

Energy Reductions Using Next-Generation Remanufacturing Techniques

The goal of this project was to develop a radically new surface coating approach that greatly enhances the performance of thermal spray coatings. Rather than relying on a roughened grit blasted substrate surface for developing a mechanical bond between the coating and substrate, which is the normal practice with conventional thermal spraying, a hybrid approach of combining a focused laser beam to thermally treat the substrate surface in the vicinity of the rapidly approaching thermally-sprayed powder particles was developed. This new surface coating process is targeted primarily at enabling remanufacturing of components used in engines, drive trains and undercarriage systems; thereby providing a substantial global opportunity for increasing the magnitude and breadth of parts that are remanufactured through their life cycle, as opposed to simply being replaced by new components. The projected benefits of a new remanufacturing process that increases the quantity of components that are salvaged and reused compared to being fabricated from raw materials will clearly vary based on the specific industry and range of candidate components that are considered. At the outset of this project two different metal processing routes were considered, castings and forgings, and the prototypical components for each process were liners and crankshafts, respectively. The quantities of parts used in the analysis are based on our internal production of approximately 158,000 diesel engines in 2007. This leads to roughly 1,000,000 liners (assuming a mixture of 6- and 8-cylinder engines) and 158,000 crankshafts. Using energy intensity factors for casting and forgings, respectively, of 4450 and 5970 Btu-hr/lb along with the energy-induced CO 2 generation factor of 0.00038 lbs CO 2 /Btu, energy savings of over 17 trillion BTUs and CO 2 reductions of over 6.5 million lbs could potentially be realized by remanufacturing the above mentioned quantities of crankshafts and liners. This project supported the Industrial Technologies Program's initiative titled 'Industrial Energy Efficiency Grand Challenge.' To contribute to this Grand Challenge, we. pursued an innovative processing approach for the next generation of thermal spray coatings to capture substantial energy savings and green house gas emission reductions through the remanufacturing of steel and aluminum-based components. The primary goal was to develop a new thermal spray coating process that yields significantly enhanced bond strength. To reach the goal of higher coating bond strength, a laser was coupled with a traditional twin-wire arc (TWA) spray gun to treat the component surface (i.e., heat or partially melt) during deposition. Both ferrous and aluminum-based substrates and coating alloys were examined to determine what materials are more suitable for the laser-assisted twin-wire arc coating technique. Coating adhesion was measured by static tensile and dynamic fatigue techniques, and the results helped to guide the identification of appropriate remanufacturing opportunities that will now be viable due to the increased bond strength of the laser-assisted twin-wire arc coatings. The feasibility of the laser-assisted TWA (LATWA) process was successfully demonstrated in this current effort. Critical processing parameters were identified, and when these were properly controlled, a strong, diffusion bond was developed between the substrate and the deposited coating. Consequently, bond strengths were nearly doubled over those typically obtained using conventional grit-blast TWA coatings. Note, however, that successful LATWA processing was limited to ferrous substrates coated with steel coatings (e.g., 1020 and 1080 steel). With Al-based substrates, it was not possible to avoid melting a thin layer of the substrate during spraying, and this layer re-solidified to form a band of intermetallic phases at the substrate/coating interface, which significantly diminished the coating adhesion. The capability to significantly increase the bond strength with ferrous substrates and coatings may open new remanufacturing opportunities that were previously not considered due to concerns with the limits of the mechanical bonding of conventional TWA coatings. However, the limited results obtained within this one-year program are not sufficient to move the LATWA into a production environment. Additional work will be needed engineer the process to coat components with more complex geometries than the flat specimens studied in this work. In addition part-specific bench testing and relevant field tests will be required to fully establish the necessary confidence for introducing the LATWA process. These are typical constraints and requirements for most any new production process, and it is quite possible this new process will continue to be a viable approach for extending the usage of remanufacturing, and in turn capturing the resulting energy savings and green house gas emission reductions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Digitalization of an experimental electrochemical reactor via the smart manufacturing innovation platform

The exponential increase in data produced over the last two decades has revolutionized the way we collect, store, process, analyze, model, and interpret information to improve profitability. Manufacturing is no exception. How- ever, Smart Manufacturing, the digital practice, organization, workforce, and infrastructure transformation for collection and deployment of data and models at scale and at all levels of manufacturing, is a complex, costly, and labor-intensive journey that is still seeing slow adoption. The Clean Energy Smart Manufacturing Innovation Institute (CESMII), a national Manufacturing USA public-private partnership sponsored by the Department of Energy, is addressing this scaled use of data and modeling in manufacturing. CESMII has focused on how to col- lect and use operating data for numerous applications that improve productivity, precision, and performance of manufacturing operations from factory floor to supply chain using process simulation, predictive analytics, mon- itoring and control, and real-time optimization. Because contextualized data are key, CESMII has developed the Smart Manufacturing Innovation Platform (SMIP) to lower the barriers to the data that are needed to accelerate data-based model building, improve data visualization, and more quickly gain insights. Reusable, standards-based ways of doing data collection, ingestion, and contextualization are particularly important for scaling access and use of data. The SMIP uses a standards-based definition and construct for reusable information models called an SM Profile. When an SM Profile is used in conjunction with the SMIP, the SMIP ensures the availability of contextualized, operational data for model building. The present work demonstrates Smart Manufacturing and the application of the SMIP for building several data-centered models for the operation and control of an ex- perimental electrochemical reactor that reduces carbon dioxide (CO 2 ) gas to valuable liquid and gas chemicals, such as alcohols, olefins, and syngas. We describe how the SMIP plays a central role in more effective model building and we demonstrate how the electochemical reactor can be controlled and optimized for the desired products. Use of the SMIP involves the transmission of real-time sensor measurements to a cloud resource so that the operating data are available to all model building experts. The data collection and transmission process is fully automated to greatly reduce the need for manual manipulation of the data. Data-driven machine learning models are used for advanced real-time state estimation, real-time optimization, and model-based feedback control for the reactor. The application models are implemented as a system to monitor the data flow and control the electrochemical reactor with a single visualization interface. SM Profiles are used to demonstrate reusability of the information models for the reactor and the instrumentation. The application packages, algorithms, and user interfaces developed are cast as Docker images in a library to facilitate reusability of the application models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cast Metals Coalition Technology Transfer and Program Management Final Report

The Cast Metals Coalition (CMC) partnership program was funded to ensure that the results of the Department of Energy's (DOE) metalcasting research and development (R&D) projects are successfully deployed into industry. Specifically, the CMC program coordinated the transfer and deployment of energy saving technologies and process improvements developed under separately funded DOE programs and projects into industry. The transition of these technologies and process improvements is a critical step in the path to realizing actual energy savings. At full deployment, DOE funded metalcasting R&D results are projected to save 55% of the energy used by the industry in 1998. This closely aligns with DOE's current goal of driving a 25% reduction in industrial energy intensity by 2017. In addition to benefiting DOE, these energy savings provide metalcasters with a significant economic advantage. Deployment of already completed R&D project results and those still underway is estimated to return over 500% of the original DOE and industry investment. Energy savings estimates through December 2008 from the Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) portfolio of projects alone are 12 x 1012 BTUs, with a projection of over 50 x 1012 BTUs ten years after program completion. These energy savings and process improvements have been made possible through the unique collaborative structure of the CMC partnership. The CMC team consists of DOE's Office of Industrial Technology, the three leading metalcasting technical societies in the U.S: the American Foundry Society; the North American Die Casting Association; and the Steel Founders Society of America; and the Advanced Technology Institute (ATI), a recognized leader in distributed technology management. CMC provides collaborative leadership to a complex industry composed of approximately 2,100 companies, 80% of which employ less than 100 people, and only 4% of which employ more than 250 people. Without collaboration, new technologies enabling energy efficiencies and environment-friendly improvements are slow to develop, and have trouble obtaining a broad application. The CMC team was able to effectively and efficiently transfer the results of DOE's metalcasting R&D projects to industry by utilizing and delivering the numerous communication vehicles identified in the proposal. The three metalcasting technical associations achieved significant technology transition results under this program. In addition to reaching over 23,000 people per year through Modern Casting and 28,000 through Engineered Casting Solutions, AFS had 84 national publications and reached over 1,200 people annually through Cast Metals Institute (CMI) education courses. NADCA's education department reached over 1,000 people each year through their courses, in addition to reaching over 6,000 people annually through Die Casting Engineer, and publishing 58 papers. The SFSA also published 99 research papers and reached over 1,000 people annually through their member newsletters. In addition to these communication vehicles, the CMC team conducted numerous technical committee meetings, project reviews, and onsite visits. All of these efforts to distribute the latest metalcasting technologies contributed to the successful deployment of DOE's R&D projects into industry. The DOE/CMC partnership demonstrated significant success in the identification and review of relevant and easy-to-implement metalcasting energy-saving processes and technologies so that the results are quickly implemented and become general practice. The results achieved in this program demonstrate that sustained technology transfer efforts are a critical step in the deployment of R&D projects to industry.

36 MATERIALS SCIENCE↗

Irrigation in the Earth System

Irrigation accounts for ~70% of global freshwater withdrawals and ~90% of consumptive water use, driving myriad Earth system impacts. In this Review, we summarize how irrigation currently impacts key components of the Earth system. Estimates suggest that more than 3.6 million km 2 of currently irrigated land, with hot spots in the intensively cultivated US High Plains, California Central Valley, Indo-Gangetic Basin and northern China. Process-based models estimate that ~2,700 ± 540 km 3 irrigation water is withdrawn globally each year, broadly consistent with country-reported values despite these estimates embedding substantial uncertainties. Expansive irrigation has modified surface energy balance and biogeochemical cycling. A shift from sensible to latent heat fluxes, and resulting land–atmosphere feedbacks, generally reduce regional growing season surface temperatures by ~1–3 °C. Irrigation can ameliorate temperature extremes in some regions, but conversely exacerbates moist heat stress. Modelled precipitation responses are more varied, with some intensive cropping regions exhibiting suppressed local precipitation but enhanced precipitation downstream owing to atmospheric circulation interactions. Additionally, irrigation could enhance cropland carbon uptake; however, it can also contribute to elevated methane fluxes in rice systems and mobilize nitrogen loading to groundwater. Cross-disciplinary, integrative research efforts can help advance understanding of these irrigation–Earth system interactions, and identify and reduce uncertainties, biases and limitations.

Climate sciences↗

The contribution of microbunching instability to solar flare emission in the GHz to THz range of frequencies

Recent solar flare observations in the sub-terahertz range have provided evidence of a new spectral component with fluxes increasing for larger frequencies, separated from the well-known microwave emission that maximizes in the gigahertz range. Suggested interpretations explain the terahertz spectral component but do not account for the simultaneous microwave component. We present a mechanism for producing the observed 'double spectra'. Based on coherent enhancement of synchrotron emission at long wavelengths in laboratory accelerators, we consider how similar processes may occur within a solar flare. The instability known as microbunching arises from perturbations that produce electron beam density modulations, giving rise to broadband coherent synchrotron emission at wavelengths comparable to the characteristic size of the microbunch structure. The spectral intensity of this coherent synchrotron radiation (CSR) can far exceed that of the incoherent synchrotron radiation (ISR), which peaks at a higher frequency, thus producing a double-peaked spectrum. Successful CSR simulations are shown to fit actual burst spectral observations, using typical flaring physical parameters and power-law energy distributions for the accelerated electrons. The simulations consider an energy threshold below which microbunching is not possible because of Coulomb repulsion. Only a small fraction of the radiating charges accelerated to energies above the threshold is required to produce the microwave component observed for several events. The ISR/CSR mechanism can occur together with other emission processes producing the microwave component. It may bring an important contribution to microwaves, at least for certain events where physical conditions for the occurrence of the ISR/CSR microbunching mechanism are possible.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact-generated winds on Venus: Causes and effects

The pressure of the dense atmosphere of Venus significantly changes the appearance of ejecta deposits relative to craters on the Moon and Mercury. Conversely, specific styles and sequences of ejecta emplacement can be inferred to represent different intensities of atmospheric response winds acting over different timescales. Three characteristic timescales can be inferred from the geologic record: surface scouring and impactor-controlled (angle and direction) initiation of the long fluidized run-out flows; nonballistic emplacement of inner, radar-bright ejecta facies and radar-dark outer facies; and very late reworking of surface materials. These three timescales roughly correspond to processes observed in laboratory experiments that can be scaled to conditions on Venus (with appropriate assumptions): coupling between the atmosphere and earlytime vapor/melt (target and impactor) that produces an intense shock that subsequently evolves into blast/response winds; less energetic dynamic response of the atmosphere to the outward-moving ballistic ejecta curtain that generates nonthermal turbulent eddies; and late recovery of the atmosphere to impact-generated thermal and pressure gradients expressed as low-energy but long-lived winds. These different timescales and processes can be viewed as the atmosphere equivalent of shock melting, material motion, and far-field seismic response in the target. The three processes (early Processes, Atmospheric Processes, and Late Recovery Winds) are discussed at length.

Schultz, Pater H.↗

Neutrino pair emission off electrons in a strong electromagnetic wave field

The emission of {nu}{nu} pairs off electrons in a polarized ultraintense electromagnetic (e.g., laser) wave field is analyzed. We elaborate on the significance of nonlinear electrodynamics effects (i.e., multiphoton processes) and the peculiarities of neutrino production. Special attention is devoted to the convergence of the reaction probabilities as a function of the number of absorbed photons. Expressions for large field intensities are provided. The asymmetry between the probabilities of electron and {mu}+{tau} neutrino production depends on initial conditions such as energy of the wave field photons and the field intensity. These findings differ from the lowest-order perturbative calculation of the reaction {gamma}+e{yields}e{sup '}+{nu}{nu}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗