Search NASA⌕ Search

SEARCH · Search NASA

Results for “Excel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Properties of the thermally stable Al{sub 95}Cr{sub 3.1}Fe{sub 1.1}Ti{sub 0.8} alloy prepared by cold-compression at ultra-high pressure and by hot-extrusion

An Al{sub 95}Cr{sub 3.1}Fe{sub 1.1}Ti{sub 0.8} (in at.%) alloy was made into rapidly solidified powder by melt atomization. The powder was compacted by two processes: 1) uni-axial cold compression at an ultra-high pressure of 6 GPa and 2) hot extrusion at 480 Degree-Sign C. The structures, mechanical properties and thermal stability of both materials were compared with the commercial AlSi{sub 12}Cu{sub 1}Mg{sub 1}Ni{sub 1} (in wt.%) casting alloy, which is generally considered to be thermally stable. It was found that cold compression at ultra-high pressure created a compact and porosity-free material, which was similar to the material that was prepared with the commonly used hot extrusion method. The Vickers hardness, compressive strength and compressive yield strength of the cold-compressed alloy were 161 HV, 680 MPa and 547 MPa, respectively, which were higher than the values obtained for the hot-extruded and casting alloys. The thermal stability of the hot-extruded Al{sub 95}Cr{sub 3.1}Fe{sub 1.1}Ti{sub 0.8} alloy was excellent because its mechanical properties did not change significantly, even after 100 h of annealing at 500 Degree-Sign C. The mechanical properties and thermal stability of the investigated materials were discussed in relation to their structures and diffusivities of the alloying elements. - Highlights: Black-Right-Pointing-Pointer The Al{sub 95}Cr{sub 3.1}Fe{sub 1.1}Ti{sub 0.8} alloy was prepared by compression at an ultra-high pressure of 6 GPa. Black-Right-Pointing-Pointer The resulting material was dense and porosity-free. Black-Right-Pointing-Pointer The material had high hardness of 161 HV and a compressive strength of 680 MPa. Black-Right-Pointing-Pointer The material had excellent thermal stability at 500 Degree-Sign C.

36 MATERIALS SCIENCE↗

Photocatalytic studies of Ho–Zr–O nano-composite with controllable composition and defects

With the help of sol–gel method assisted by melting salt, a series of Ho–Zr–O nano-composite with controllable composition and defects have been successfully prepared. Characterization results show that the positions, intensity, and width of the X-ray diffraction peaks of the products have a regular variation with the increase of zirconium element which implies the gradual changes of crystal spacing and product size. At the same time, the molar ratios between holmium and zirconium ions are consistent with the chemical formula and both of them are uniformly distributed in products further showing the perfect formation of targeted materials. Optical properties reveal that diversified defect forms of Ho–Zr–O nano-composite lead to the different absorptions of visible light. Photocatalytic experiments demonstrate Zr{sub 0.8}Ho{sub 0.2}O{sub 2−δ} nano-crystals have excellent visible-light-responsive photocatalytic activities on some familiar dyes (e.g.: methylene blue and Rhodamine B) which results from the special defect structure, better absorption of visible light and larger specific surface area. It follows that Zr{sub 0.8}Ho{sub 0.2}O{sub 2−δ} nano-crystals are a new kind of visible-light-responsive photocatalysts with better prospects in conversion and utilization of solar energy. Also, the present melting salt assisted route might be generalized to synthesize other AxByOz composite oxide nano-crystals with more complicated structures. - Highlights: • Ho–Zr–O nano-composite with controllable composition and defects has been obtained. • Diversified defect forms of products lead to the different visible light absorption. • Zr{sub 0.8}Ho{sub 0.2}O{sub 2−δ} nano-crystals have excellent photocatalytic activities.

36 MATERIALS SCIENCE↗

EBSD characterization of twinning in cold-rolled CP-Ti

This work presents the use of a mechanical testing system and the electron backscatter diffraction technique to study the mechanical properties and twinning systems of cold-rolled commercial purity titanium, respectively. The dependence of twinning on the matrix orientation is analyzed by the distribution map of Schmid factor. The results showed that the commercial purity titanium experienced strong strain hardening and had excellent formability during rolling. Both the (112{sup ¯}2)<112{sup ¯}3{sup ¯}> compressive twins and (101{sup ¯}2)<101{sup ¯}1{sup ¯}> tensile twins were dependent on the matrix orientation. The Schmid factor of a grain influenced the activation of a particular twinning system. The specific rolling deformation of commercial purity titanium controlled the number and species of twinning systems and further changed the mechanical properties. - Highlights: • CP-Ti experienced strain hardening and had excellent formability. • Twins were dependent on the matrix orientation. • Schmid factor of a grain influenced the activation of a twinning system. • Rolling deformation controlled twinning systems and mechanical properties.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Urchin-like Mischcrystal TiO{sub 2} and Its Photocatalysis

The urchin-like mischcrystal TiO{sub 2} using acid attapulgite as an introducer was synthesized after a subsequent low-temperature hydrolyzation and crystallization followed by removal of acid attapulgite. The samples were characterized by transmission electron microscope, X-ray diffraction, Fourier transform infrared spectra and X-ray photoelectron spectroscopy. Acid attapulgite plays a critical role in the morphology and crystal structure of TiO{sub 2}. The results suggest that the perfect urchin-like mischcrystal TiO{sub 2} is fabricated when the mass ratio of TiO{sub 2} and acid attapulgite is 0.7:1. The single urchin-like TiO{sub 2} is comprised of a nanosphere and plentiful nanoneedles. The nanoneedles grow radially on the surface of the nanosphere. The urchin-like TiO{sub 2} is around 100 nm, and the nanoneedles have a diameter ranging from 2 to 5 nm. It has been confirmed that the chemical groups of acid attapulgite have a significant influence on the growth of TiO{sub 2}. In addition, the urchin-like mischcrystal TiO{sub 2} exhibits excellent activity to assist photodegradation of Rhodamine B aqueous solution under ultraviolet light, and the degradation rate is about 94.15% for 80 min. The photocatalytic kinetics can be well described by the pseudo-first rate equation. - Highlights: • Acid attapulgite (HATP) is acted as a sacrificial introducer. • The urchin-like mischcrystal TiO{sub 2} is produced by a low-temperature method. • The morphology and crystal are controllable with the dosage of HATP. • The fabricated TiO{sub 2} exhibits excellent photocatalysis for Rhodamine B.

36 MATERIALS SCIENCE↗

Calcium silicate ceramic scaffolds toughened with hydroxyapatite whiskers for bone tissue engineering

Calcium silicate possessed excellent biocompatibility, bioactivity and degradability, while the high brittleness limited its application in load-bearing sites. Hydroxyapatite whiskers ranging from 0 to 30 wt.% were incorporated into the calcium silicate matrix to improve the strength and fracture resistance. Porous scaffolds were fabricated by selective laser sintering. The effects of hydroxyapatite whiskers on the mechanical properties and toughening mechanisms were investigated. The results showed that the scaffolds had a uniform and continuous inner network with the pore size ranging between 0.5 mm and 0.8 mm. The mechanical properties were enhanced with increasing hydroxyapatite whiskers, reached a maximum at 20 wt.% (compressive strength: 27.28 MPa, compressive Young's modulus: 156.2 MPa, flexural strength: 15.64 MPa and fracture toughness: 1.43 MPa·m{sup 1/2}) and then decreased by addition of more hydroxyapatite whiskers. The improvement of mechanical properties was due to whisker pull-out, crack deflection and crack bridging. Moreover, the degradation rate decreased with the increase of hydroxyapatite whisker content. A layer of bone-like apatite was formed on the scaffold surfaces after being soaked in simulated body fluid. Human osteoblast-like MG-63 cells spread well on the scaffolds and proliferated with increasing culture time. These findings suggested that the calcium silicate scaffolds reinforced with hydroxyapatite whiskers showed great potential for bone regeneration and tissue engineering applications. - Highlights: • HA whiskers were incorporated into CS to improve the properties. • The scaffolds were successfully fabricated by SLS. • Toughening mechanisms was whisker pull-out, crack deflection and bridging. • The scaffolds showed excellent apatite forming ability.

36 MATERIALS SCIENCE↗

Interfacial characteristics of diamond/aluminum composites with high thermal conductivity fabricated by squeeze-casting method

In this work, aluminum matrix composites reinforced with diamond particles (diamond/aluminum composites) were fabricated by squeeze casting method. The material exhibited a thermal conductivity as high as 613 W / (m · K). The obtained composites were investigated by scanning electron microscope and transmission electron microscope in terms of the (100) and (111) facets of diamond particles. The diamond particles were observed to be homogeneously distributed in the aluminum matrix. The diamond{sub (111)}/Al interface was found to be devoid of reaction products. While at the diamond{sub (100)}/Al interface, large-sized aluminum carbides (Al{sub 4}C{sub 3}) with twin-crystal structure were identified. The interfacial characteristics were believed to be responsible for the excellent thermal conductivity of the material. - Graphical abstract: Display Omitted - Highlights: • Squeeze casting method was introduced to fabricate diamond/Al composite. • Sound interfacial bonding with excellent thermal conductivity was produced. • Diamond{sub (111)}/ aluminum interface was firstly characterized by TEM/HRTEM. • Physical combination was the controlling bonding for diamond{sub (111)}/aluminum. • The growth mechanism of Al{sub 4}C{sub 3} was analyzed by crystallography theory.

36 MATERIALS SCIENCE↗

Residual-stress-induced grain growth of twinned grains and its effect on formability of magnesium alloy sheet at room temperature

A magnesium alloy sheet was subjected to in-plane compression along with a vertical load to avoid buckling during compression. Pre-compressed specimens machined from the sheet were annealed at different temperatures and the changes in microstructure and texture were observed using electron back scattered diffraction (EBSD). Twinned grains preferentially grew during annealing at 300 °C, so that a strong texture with the < 0001 > direction parallel to the transverse direction developed. EBSD analysis confirmed that the friction caused by the vertical load induced inhomogeneous distribution of residual stress, which acted as an additional driving force for preferential grain growth of twinned grain during annealing. The annealed specimen showed excellent formability. - Highlights: • A magnesium alloy sheet subjected to in-plane compression under a vertical load • The vertical load induced inhomogeneous distribution of the residual stress. • The residual stress acted as an additional driving force for grain growth. • The annealed specimen with strong non-basal texture showed excellent formability.

36 MATERIALS SCIENCE↗

Controlled synthesis of MnOOH multilayer nanowires as anode materials for lithium-ion batteries

MnOOH multilayer nanowires have been successfully synthesized by a hydrothermal method. It is found that the uniform multilayer structure of nanowires ran through the entire nanowire, which is formed via a layer by layer. The electrochemical properties of MnOOH multilayer nanowires as an anode material for Li-ion batteries (LIB) were investigated, and excellent capacity retention, superior cycling performance, and high rate capability were achieved. Specifically, the reversible capacity of MnOOH multilayer nanowires is 521 mAh/g after 500 cycles at 0.1 C, with excellent electrochemical stability. The multilayer nanowire electrodes exhibit short electron path lengths, high internal dislocation densities and large surface to volume ratio, resulting in increased specific capacity, cycling stability and rate performance in the energy storage devices, which serves as an indication of their potential application in LIBs. - Highlights: •MnOOH multilayer nanowires were synthesized by a hydrothermal method. •The uniform multilayer structure of nanowires was formed via layer by layer. •The reversible capacity of product shows 521 mAh/g after 500 cycles at 0.1 C. •MnOOH multilayer nanowires showed higher property as anode material in LIB.

36 MATERIALS SCIENCE↗

Preparation and thermal insulation analysis of SiCw-SiC foam with hollow skeletons via carbon foam template CVI method

Highlights: • SiC{sub w}-SiC foams with hollow skeleton were synthesized by chemical vapor infiltration of SiC film and SiC whiskers using flexible carbon foam as template. • The SiC{sub w}-SiC foams possess a large number of smaller pores due to the segmentation effect of the SiC whiskers. • SiC{sub w}-SiC foam exhibits an excellent thermal insulation property at high temperature. - Abstract: SiC{sub w}-SiC foams with hollow skeleton were synthesized by a simple procedure that consisted of the chemical vapor infiltration (CVI) and oxidation process. Flexible carbon foam was employed as CVI template. A typical structure of SiC{sub w}-SiC foams consisting of SiC supporter with hollow skeleton structure accompanying numerous crooked SiC whiskers was obtained after burning out carbon skeleton of the carbon foam during oxidation process. SiC{sub w}-SiC foams have a density of 0.11 ≤ ρ ≤ 0.12 g/cm{sup 3}, porosity ≥ 96% and a thermal conductivity at room temperature between 0.040 and 0.075 W/m·K. Thermal conductivity of the SiC{sub w}-SiC foams moderately increased with elevation of temperature, indicating that these foams with larger amount of whiskers exhibit excellent thermal insulation property at elevated temperature.

36 MATERIALS SCIENCE↗

Mechanical properties, deformation behavior and microstructure evolution of Ti-43Al-6Nb-1Mo-1Cr alloys

Highlights: • The alloys exhibit excellent high-temperature tensile properties. • Activation energy of deformation (Q) and n are 571 KJ/mol and 2.765, respectively. • The hot processing maps of strain 0.5 and 0.6 are displayed. • Phase transformations and microstructure evolution are explained in different conditions. • Three types of deformation mechanisms are exhibited at different temperature. - Abstract: The high-temperature properties, microstructure evolution and deformation behavior of a novel Ti-43Al-6Nb-1Mo-1Cr(at.%) alloy were studied in this paper. The ultimate tensile strength (UTS) and elongation (δ) were tested at 800, 850, and 900 °C, in which the excellent strength 551 MPa, 510 MPa, and 382 MPa, and elongation 2.9%, 12.7%, and 16.8% were exhibited, respectively. Isothermal compression tests were carried out in the temperature range of 1100–1250 °C and strain rate range of 0.001–1.0 s{sup − 1}. Based on dynamic materials model (DMM) and phase diagram, dynamic recrystallization mechanism and phase transformation during thermal deformation were clarified and the hot processing maps were calculated. The experimental results show that the values of stress exponent (n) and the apparent deformation activation energy (Q) of Ti-43Al-6Nb-1Mo-1Cr(at.%) were calculated to be 2.77 and 571 KJ/mol. Meanwhile, three various types of microstructure evolution in different deformation conditions were discussed and concluded.

36 MATERIALS SCIENCE↗

Fabrication and characterization of a novel β metastable Ti-Mo-Zr alloy with large ductility and improved yield strength

Highlights: • Ti-12Mo-5Zr alloy exhibits excellent combination of improved yielding strength (>650 MPa), high ductility (uniform elongation ≈30%) and work-hardening behaviour. • The superior performances arise from the synergic effects between phase transformation induced plasticity and twinning induced plasticity. • The ‘d-electron’ alloy design approach in Ti-12Mo-5Zr alloy, i.e. Zr substitution to Ti, validates the feasibility of yielding stress improvement of TWIP/TRIP titanium alloys. - Abstract: In this paper, a novel ternary β-metastable titanium alloy, Ti-12Mo-5Zr (wt%), was designed based on the “d-electron” alloy design theory. The Ti-12Mo-5Zr alloy displays excellent combination of improved yielding stress (>650 MPa), high ductility (uniform elongation ≈30%) and work-hardening behaviour. The detailed microstructural analysis indicates that the superior performances arise from the synergic effects between phase transformation induced plasticity (TRIP) and twinning induced plasticity (TWIP). Conforming to the design strategy, the improvement of mechanical performance results from the addition of Zr alloying element in substituting Ti, attributing to solution hardening effect and the increasing of critical resolved shear stress (CRSS) of stress induced martensitic transformation (SIM α″).

36 MATERIALS SCIENCE↗

Structural, optical and gas sensing properties of vertically well-aligned ZnO nanowires grown on graphene/Si substrate by thermal evaporation method

Highlights: • Vertically well-aligned ZnO NW arrays with high aspect ratio and extremely large-surface-volume ratio were synthesized on graphene/Si substrate without the aid of metal catalyst by a simple thermal evaporation. • The gas sensor based on the vertical ZnO NW arrays-graphene structure exhibited high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200oC, and could be used to detect NO{sub 2} gas at very low levels (2, 6, 10 ppm). • The excellent sensing performance is mainly because of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. • The common defects and optical properties of the ZnO NW arrays-graphene structure were studied in detail. • The possible growth mechanism of vertically well-aligned ZnO NWs on graphene and the gas-sensing mechanism of sensors were proposed. - Abstract: We report catalyst-free vertical growth of high-density ZnO nanowire (NW) arrays on Si substrate with a graphene buffer layer by thermal evaporation method. Structural, surface morphology, chemical composition and optical properties of ZnO NWs were studied by Field emission scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL) and Raman spectroscopy. The results indicate that the grown ZnO NWs are single-crystalline and exhibit the hexagonal wurtzite crystal structure with a preferred orientation along the [0001] direction; all of the ZnO NWs vertically grow on the graphene/Si substrate. The majority of the as-grown NWs have diameters in the range of 250–300 nm and length up to several tens of micrometers, whereas a small portion of NWs have a diameter of approximately of 9–12 nm. Room temperature PL spectrum of the ZnO NWs exhibits a sharp and strong ultraviolet emission at 380 nm and a weak visible emission at around 516 nm. The role of graphene buffer layer in the vertical-aligned ZnO NW arrays growth and its improved optical properties is demonstrated. Importantly, the gas sensor based on these ZnO NWs exhibits high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200 °C, and can detect NO{sub 2} concentration as low as 2, 6 and 10 ppm. The excellent sensing performance is mainly due to the combination of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. Such a ZnO NW/graphene structure is very promising for various applications, such as photonic, optoelectronic and sensor devices. In addition, the possible growth mechanism and the NO{sub 2} sensing gas mechanism of the ZnO NWs-graphene structure have been discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of duplex ageing on secondary α precipitates and mechanical properties of the near β-Ti alloy Ti-55531

Highlights: • High strength β-Ti alloys are widely used for their excellent properties. • To reach an excellent combination of strength and ductility, it is attractive to explore the right heat treatment system. • While compared to the conventional single-step ageing process, duplex ageing could change the development and refinement of secondary α precipitations in near/metastable β-Ti alloys resulting varying in performance. • Therefore it is of scientific significance and engineering value to understand the influence of duplex ageing on the formation of secondary α precipitates and mechanical properties for this type of alloy. - Abstract: This paper presents the results of studies on the microstructure and mechanical properties of a near β-Ti alloy processed with different ageing approaches. Influences of intragranular ultrafine α precipitates and grain boundary α layer on mechanical properties in Ti-55531 alloy were analyzed. The results indicate that the precipitation microstructure of the duplex aged alloy exhibits a uniform size and acicular α precipitated orientation shows an angle of approximately 60°. While the morphology of secondary α precipitates in single-step aged samples appear the irregular distribution and heterogeneous size. With the final ageing time increasing, the morphology of intragranular α precipitates and grain boundary α phase brings out a distinct coarsening. The single-step aged alloy can yield a better combination of the ultimate tensile strength (1265 MPa) and ductility (9%). However, the ultimate tensile strength of the duplex aged alloy even reaches 1368 MPa but it breaks at the stage of elastic deformation. The fracture mode of Ti-55531 alloy changes from predominantly dimple fracture in single-step aged samples to predominantly faceted and cleavage type fracture in duplex aged samples causing by the differences of intragranular α precipitates and the interface between grain boundary α layer and intragranular microstructure.

36 MATERIALS SCIENCE↗

Preparation and characterization of biodegradable Mg-Zn-Ca/MgO nanocomposites for biomedical applications

Highlights: • Novel biodegradable Mg-Zn-Ca/MgO matrix composites, were devised and prepared using high shear melt conditioning. • The excellent interfacial bonding between MgO particles and α-Mg matrix was observed via HRTEM and FFT pattern analysis. • The optimum solution treatment and the addition of MgO nanoparticles hugely enhanced corrosion resistance of nanocomposites. • The yield tensile strength (YTS) increased by 22.81% with 0.5% MgO addition, while the ductility did not mainly deteriorate. - Abstract: In order to improve the corrosion resistance and mechanical properties of magnesium alloys for biomedical implant applications, novel biodegradable Mg-3Zn-0.2Ca (wt%) matrix composites, reinforced by adding various contents of MgO nanoparticles (0.1, 0.2, 0.3, 0.5 wt%), were devised and prepared using high shear melt conditioning. An optimum solution treatment (450 °C, 48 h) and subsequent hot extrusion was carried out to produce the Mg-3Zn-0.2Ca/MgO composites. It was found that the as-extruded composite exhibited a fine grain structure with relatively uniformly distributed MgO particles. The orientation relationships (ORs) of (1 1 1){sub MgO} ~ 2.62° from (0 0 0 2){sub α-Mg} and [0 −1 1]{sub MgO} // [2 −1 −1 0]{sub α-Mg}, were observed between the MgO particles and the α-Mg matrix via high resolution transmission electron microscopy (HRTEM) investigation and fast Fourier transform (FFT) pattern analysis, verifying the excellent interfacial bonding between the phases. Additionally, a substantial reduction in the secondary phase content was found in the solution treated sample. In vitro immersion, electrochemical, and mechanical tensile tests were used to characterize the corrosion behavior and mechanical properties. The ultimate tensile strength (UTS) increased to 329.03 ± 2.01 MPa and the yield tensile strength (YTS) increased by 22.81% with 0.5 wt% MgO loading, while the ductility did not substantially deteriorate. The polarization resistance (R{sub p}) of the composite was shown to increase from 0.95 kΩ cm{sup 2} to 2.02 kΩ cm{sup 2} with the addition of 0.2 wt% MgO. With increasing MgO content, agglomeration of the MgO particles was detected in the analyzed composite, resulting in decreased ductility and the occurrence of pitting corrosion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication and properties of biodegradable ZnO nano-rods/porous Zn scaffolds

Highlights: • ZnO nano-rods/porous Zn scaffolds were fabricated successfully. • Compressive property of ZnO nano-rods/porous Zn scaffolds is not decrease obviously. • The ZnO nano-rods/porous Zn scaffolds have a good corrosion resistance in SBF. • The ZnO nano-rods/porous Zn scaffolds can efficiently induce Ca-P precipitation. • The ZnO nano-rods/porous Zn scaffolds have an excellent antibacterial activity. - Abstract: Biodegradable ZnO nano-rods/porous Zn scaffolds were successfully fabricated by treating the porous Zn scaffolds in NaCl solution at 80 °C. X-ray diffraction (XRD) analysis shows that the nano-rods in situ fabricated on the porous Zn scaffolds in NaCl solution are hexagonal ZnO phase. This result is also confirmed by the image of high resolution transmission electron microscope (HRTEM) and the analysis of X-ray photoelectron spectroscopy (XPS). Compressive tests suggest that the compressive mechanical properties of the ZnO nano-rods/porous zinc scaffolds do not decrease significantly compared with that of the porous Zn scaffolds without treating in NaCl solution. Immersion tests in simulated body fluid (SBF) show that the ZnO nano-rods/porous zinc scaffolds slightly gain in weight after 16 days of immersion. Moreover, these ZnO nano-rods/porous zinc scaffolds can efficiently induce Ca-P precipitation during immersion tests and show a good bioactivity. In addition, antibacterial tests imply that the ZnO nano-rods/porous zinc scaffolds have an excellent antibacterial ability against Escherichia coli and Staphylococcus aureus. However, the results of cytotoxicity tests of ZnO nano-rods/porous Zn scaffolds are not satisfactory.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fine particle Sr{sub 2}SiO{sub 4}:Tb phosphor for the plasma display panel prepared by a combined approach

Sol-gel with microwave heating was employed to prepare fine particles Sr{sub 2}SiO{sub 4}:Tb phosphor. X-ray diffractometer was used to characterize the structural of the samples. The Scanning Electron Microscope image shows that the particle size is about 300 nm. The phosphor particles have several advantages in the morphology, such as excellent surface quality, spherical shape, and narrow size distribution with no aggregation. The VUV luminescence measurements indicate that the phosphor presents an intense excitation band at 173 nm. Because the wavelength of excitation source in PDP is mainly at 147 and 172 nm, it makes Sr{sub 2}SiO{sub 4}:Tb a potential candidate for green emitting phosphor for plasma display panel (PDP) application. Photoluminescence (PL) measurements indicate that the Sr{sub 2}SiO{sub 4}:Tb particles present excellent green emission at 542 and 547 nm excitated at 236 and 172 nm, respectively.

36 MATERIALS SCIENCE↗

A facile method to prepare stable noncovalent functionalized graphene solution by using thionine

Research highlights: {yields} We prepared two kinds of noncovalent functionalized graphene by using the thionine as a stabilizer. {yields} The synthesized functionalized graphenes aqueous solution was very stable because of the presence of {pi}-{pi} interactions, and the resultant products were single- and double-layer graphene. {yields} The modified graphene possesses excellent conductivity property. -- Abstract: A novel noncovalent functionalization approach was presented here to exfoliate and stabilize the chemical converted graphene and the low-temperature exfoliated graphene in aqueous solution by using thionine. It was found that the thionine exhibited the {pi}-{pi} stacking force with the graphene sheets, and the attachment of thionine molecules onto the graphenes' surfaces could obviously improve their solubility in water. The AFM observation further verified that the graphene sheets with single-layer to double-layer were existed in the dispersions. The electronic test indicated that the modified graphene sheets possessed excellent electronic properties.

36 MATERIALS SCIENCE↗

Novel solar light driven photocatalyst, zinc indium vanadate for photodegradation of aqueous phenol

Graphical abstract: Novel photocatalyst, zinc indium vanadate (ZnIn{sub 2}V{sub 2}O{sub 9}) demonstrated and showed an excellent photocatalytic activity for phenol degradation under visible light. Research highlights: {yields} Designing and identification of a photocatalyst having prospective potential application to be used in visible light (400-800 nm). {yields} Successful synthesis of novel ZnIn{sub 2}V{sub 2}O{sub 9} by solid state route. {yields} Confirmation of the designed product using characterization techniques. {yields} Application study comprising photodegradation of aqueous phenol at visible light despite of UV radiations. -- Abstract: In the present investigation, we have demonstrated the synthesis of novel photocatalyst, zinc indium vanadate (ZIV) by solid-solid state route using respective oxides of zinc, indium and vanadium. This novel photocatalyst was characterized using XRD, FESEM, UV-DRS and FTIR in order to investigate its structural, morphological and optical properties. XRD clearly shows the formation of phase pure ZIV of triclinic crystal structure with good crystallinity. FESEM micrographs showed the clustered morphology having particle size between 0.5 and 1 {mu}m. Since, optical study showed the band gap around 2.8 eV, i.e. in visible region, we have performed the photocatalytic activity of phenol degradation under visible light irradiation. The photodecomposition of phenol by ZIV is studied for the first time and an excellent photocatalytic activity was obtained using this novel photocatalyst. Considering the band gap of zinc indium vanadate in visible region, it will also be the potential candidate for water splitting.

36 MATERIALS SCIENCE↗