Search NASA⌕ Search

SEARCH · Search NASA

Results for “FEED study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Combining Random Mutagenesis and Metabolic Engineering for Enhanced Tryptophan Production in Synechocystis sp. Strain PCC 6803

Tryptophan (Trp) is an essential aromatic amino acid that has value as an animal feed supplement, as the amount found in plant-based sources is insufficient. An alternative to production by engineered microbial fermentation is to have tryptophan biosynthesized by a photosynthetic microorganism that could replace or supplement both the plant and industrially used microbes. We selected Synechocystis sp. strain PCC 6803, a model cyanobacterium, as the host and studied metabolic engineering and random mutagenesis approaches. Previous work on engineering heterotrophic microbes for improved Trp titers has targeted allosteric feedback regulation in enzymes 3-deoxy-d-arabinoheptulosonate 7-phosphate synthase (DAHPS) and anthranilate synthase (AS) as major bottlenecks in the shikimate pathway. In this work, the genes encoding feedback-resistant enzymes from Escherichia coli, aroG fbr and trpE fbr , were overexpressed in the host wild-type (WT) strain. Separately, the WT strain was subjected to random mutagenesis and selection using an amino acid analog to isolate tryptophan-overproducing strains. The randomly mutagenized strains were sequenced in order to identify the mutations that resulted in the desirable phenotypes. Interestingly, the tryptophan overproducers had mutations in the gene encoding chorismate mutase (CM), which catalyzes the conversion of chorismate to prephenate. The best tryptophan overproducer from random mutagenesis was selected as a host for metabolic engineering where aroG fbr and trpE fbr were overexpressed. The best strain developed produced 212 ± 23 mg/liter of tryptophan after 10 days of photoautotrophic growth under 3% (vol/vol) CO2. We demonstrated that a combination of random mutagenesis and metabolic engineering was superior to either individual approach.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Cyclic dynamics of misfires and partial burns in a dilute spark-ignition engine

Here, this study investigates the cyclic dynamics of cumulative heat release data past the edge of stability in a dilute spark-ignition engine. Emphasis is placed on analyzing the cyclic dynamics near the dilute limit where partial burns and misfires are frequent. These events are often followed by a higher-energy cycle due to the feed-forward mechanism present in the residual gases. These patterns are deterministic and increase the coefficient of variation to undesirable levels. Symbol sequence analysis was used to investigate the cyclic dynamics of these low–high patterns. The heat release was partitioned on an energy basis to give physical meaning to each partition and each sequence created when analyzing the symbol sequence results. This partitioning method provided insight into the differences in the dynamics when operating in the misfire or partial burn regime. These differences could impact the control method used.

42 ENGINEERING↗
DOE OSTI2023

Seeking Self-regulating Simulations of Idealized Milky Way–like Galaxies

Abstract Precipitation is potentially a mechanism through which the circumgalactic medium (CGM) can regulate a galaxy’s star formation. Here, we present idealized simulations of isolated Milky Way–like galaxies intended to examine the ability of galaxies to self-regulate their star formation, in particular via precipitation. We also examine the impact of rotation in the CGM. Using six simulations, we explore variations in the initial CGM t cool / t ff ratio and rotation profile. Those variations affect the amount of gas accretion and star formation within the galactic disk. To encourage this accretion and better study its dependence on CGM structure, we gradually increase the efficiency of stellar feedback during the first half of our simulations. Yet despite this gradual increase, the resulting outflows quickly evacuate large, hot cavities within the CGM and even beyond r 200 . Some of the CGM gas avoids interacting with the cavities and is able to feed the disk along its midplane, but the cooling of feedback-heated gas far from the midplane is too slow to supply the disk with additional gas. Our simulations illustrate the importance of physical mechanisms in the outer CGM and IGM for star formation regulation in Milky Way–scale halos.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1974

Aperture excited dielectric antennas

The results of a comprehensive experimental and theoretical study of the effect of placing dielectric objects over the aperture of waveguide antennas are presented. Experimental measurements of the radiation patterns, gain, impedance, near-field amplitude, and pattern and impedance coupling between pairs of antennas are given for various Plexiglas shapes, including the sphere and the cube, excited by rectangular, circular, and square waveguide feed apertures. The waveguide excitation of a dielectric sphere is modeled using the Huygens' source, and expressions for the resulting electric fields, directivity, and efficiency are derived. Calculations using this model show good overall agreement with experimental patterns and directivity measurements. The waveguide under an infinite dielectric slab is used as an impedance model. Calculations using this model agree qualitatively with the measured impedance data. It is concluded that dielectric loaded antennas such as the waveguide excited sphere, cube, or sphere-cylinder can produce directivities in excess of that obtained by a uniformly illuminated aperture of the same cross section, particularly for dielectric objects with dimensions of 2 wavelengths or less. It is also shown that for certain configurations coupling between two antennas of this type is less than that for the same antennas without dielectric loading.

Crosswell, W. F.↗
NASA NTRS1975

A Thruster Sub-System Module (TSSM) for solar electric propulsion

Solar Electric Propulsion (SEP) is currently being studied for possible use in a number of near-earth and planetary missions. Thruster systems for these missions could be integrated directly into a spacecraft or modularized into a Thruster Sub-System Module (TSSM). A TSSM for electric propulsion missions would consist of a 30-cm ion thruster, thruster gimbal system, propellant storage and feed system, associated Power Processing Unit (PPU), thermal control system and complete supporting structure. The TSSM would be wholly self-contained and be essentially a plug-in or strap-on electric stage with simple mechanical, thermal, electrical and propellant interfaces. The TSSM described in this report is designed for a broad range of missions requiring from two to ten TSSM's mounted in a 2 by x configuration. The thermal control system is designed to accommodate waste heat from the power processor based on realistic efficiencies when the TSSM is operating from 0.7 to 3.5 AU's. The modules are 0.61 M (2 ft) wide by 2.29 M (7.5 ft) long and have a dry weight including propellant tank of 54.4 kg (120 lb). The propellant tank will hold 145.1 kg (320 lb) of mercury.

Sharp, G. R.↗
NASA NTRS1984

Aircraft automatic digital flight control system with inversion of the model in the feed-forward path

A full-flight-envelope automatic trajectory control system concept is being investigated at Ames Research Center. This concept was developed for advanced aircraft configurations with severe nonlinear characteristics. A feature of the system is an inverse of the complete nonlinear aircraft model as part of the feed-forward control path. Simulation and flight tests have been reported at previous Digital Avionics Systems conferences. A new method for the continuous real-time inversion of the aircraft model using a Newton-Raphson trim algorithm instead of the original inverse table look-up procedure has been developed. The results of a simulation study of a vertical attitude takeoff and landing aircraft using the new inversion technique are presented. Maneuvers were successfully carried out in all directions in the vertical-attitude hover mode. Transition runs from conventional flight through the region of lift-curve-slope reversal at an angle of attack of about 32 deg and to hover at zero speed in the vertical attitude showed satisfactory transient response. Simulations were also conducted in conventional flight at high subsonic speed in steep climb and with turns up to 4 g. Successful flight tests of the system with the new model-inversion technique in a UH-1H helicopter have recently been carried out.

Smith, G. A.↗
NASA NTRS1986

Performance of the high speed anechoic wind tunnel at Lyon University

The characteristics of the feed duct, the wind tunnel, and the experiments run in the convergent-divergent anechoic wind tunnel at Lyon University are described. The wind tunnel was designed to eliminate noise from the entrance of air or from flow interactions with the tunnel walls so that noise caused by the flow-test structure interactions can be studied. The channel contains 1 x 1 x 0.2 m glass and metal foil baffles spaced 0.2 m apart. The flow is forced by a 350 kW fan in the primary circuit, and a 110 kW blower in the secondary circuit. The primary circuit features a factor of four throat reductions, followed by a 1.6 reduction before the test section. Upstream and downstream sensors permit monitoring of the anechoic effectiveness of the channel. Other sensors allow modeling of the flow structures in the tunnel. The tunnel was used to examine turbulent boundary layers in flows up to 140 m/sec, tubulence-excited vibrations in walls, and the effects of laminar and turbulent flows on the appearance and locations of noise sources.

Sunyach, M.↗
NASA NTRS1996

Modeling and Simulation of the Direct Methanol Fuel Cell

From intro.: The direct methanol liquid feed fuel cell uses aqueous solutions of methanol as fuel and oxygen or air as the oxidant and uses an ionically conducting polymer membrane such as Nafion(sup r)117 and the electrolyte. This type of direct oxidation cell is fuel versatile and offers significant advantages in terms of simplicity of design and operation...The present study focuses on the results of a phenomenological model based on current understanding of the various processed operating in these cells.

fuel cell methanol fuel cell methanol↗
NASA NTRS2009

Spacecraft Electrical Connector Selection and Application Processes

This assessment was initiated by the NASA Engineering & Safety Center (NESC) after a number of recent "high profile" connector problems, the most visible and publicized of these being the problem with the Space Shuttle's Engine Cut-Off System cryogenic feed-thru connector. The NESC commissioned a review of NASA's connector selection and application processes for space flight applications, including how lessons learned and past problem records are fed back into the processes to avoid recurring issues. Team members were primarily from the various NASA Centers and included connector and electrical parts specialists. The commissioned study was conducted on spacecraft connector selection and application processes at NASA Centers. The team also compared the NASA spacecraft connector selection and application process to the military process, identified recent high profile connector failures, and analyzed problem report data looking for trends and common occurrences. The team characterized NASA's connector problem experience into a list of top connector issues based on anecdotal evidence of a system's impact and commonality between Centers. These top issues are as follows, in no particular rank order: electrically shorted, bent and/or recessed contact pins, contact pin/socket contamination leading to electrically open or intermittencies, connector plating corrosion or corrosion of connector components, low or inadequate contact pin retention forces, contact crimp failures, unmated connectors and mis-wiring due to workmanship errors during installation or maintenance, loose connectors due to manufacturing defects such as wavy washer and worn bayonet retention, damaged connector elastomeric seals and cryogenic connector failure. A survey was also conducted of SAE Connector AE-8C1 committee members regarding their experience relative to the NASA concerns on connectors. The most common responses in order of occurrence were contact retention, plating issues, worn-out or damaged coupling mechanisms, bent pins, contact crimp barrel cracking and torn seals. In addition to these common themes, responses included issues with markings, dimensional errors on the build, contact/socket damage (handling), manufacturing defects and customer misapplication and mishandling. The NESC team concluded that considering the large quantity and wide variety of connectors successfully flown on human and robotic space applications, the number of failures is quite low. However, "high profile" failures with significant cost, schedule, safety, and/or mission success impacts continue to occur. It was also concluded that connector failures occur throughout a system's life-cycle with the majority of connector issues application related. A number of recommendations were identified for improving NASA connector selection processes and overall space connector reliability and performance.

Iannello, Chris↗
DOE OSTI2024

Pairing Ga/Al-Zeolites with tailored acidity as tandem catalysts for the conversion of alcohols to olefins

Zeolites are versatile catalysts owing to their tunable acidity where the active site(s) can be placed within the crystal framework or as extra-framework species in confined pores. A common approach to tailor Brønsted acidity is heteroatom exchange involving the replacement of framework aluminum with alternative elements. Introduction of heteroatoms often results in less acidic catalysts that can be used in tandem reactions for targeted reactive intermediates. Here, in this study, we prepare a series of three different zeolites with MWW, CHA, and MFI frameworks as aluminosilicates and gallosilicates to demonstrate their performance in alcohol dehydration reactions. The two reactions examined in this study are methanol conversion to dimethyl ether and ethanol conversion to ethylene. Our findings reveal that Ga-zeolites exhibit superior performance with Ga-MCM-22 (MWW) achieving nearly 100% alcohol conversion and selectivity to desired products at contact times that are significantly less than most dehydration catalysts reported in literature. The unique properties of Ga-zeolites are attributed to their reduced acid site strength via a direct (one-pot) synthesis that avoids conventional time-intensive, multi-step post-synthesis modifications of Al-zeolites. Here we demonstrate the use of Ga-zeolites as tandem catalysts when paired with a downstream Al-zeolite in a dual-bed reactor configuration to convert cheaper reagents (alcohols) upstream to more desired intermediates as feeds for downstream catalysts to produce light olefins. We demonstrate that dual beds using Ga-zeolite – Al-ZSM-5 (upstream–downstream) pairings outperform single bed configurations with Al-ZSM-5 or a physical mixture (Ga-/Al-zeolite) for methanol to hydrocarbons reactions, with notable improvements in catalyst lifetime and increased light olefins selectivity. Similarly, dual beds using Ga-zeolite – Al-SSZ-13 (upstream–downstream) pairings result in improved performance for ethanol to propylene reactions with significant increases in propylene selectivity (>20 %) compared to a conventional single bed configuration of Al-SSZ-13. Overall, this study offers a new perspective on the use of heteroatom-exchanged zeolite catalysts in tandem reactions as a means of capitalizing on their reduced acid site strength and suggests differences in the intrinsic acidity of zeolite crystal structures.

42 ENGINEERING↗
DOE OSTI2020

NH 4 OH Looping with Membrane CO 2 Absorber and Distributed Stripper for Enhanced Algae Growth

The University of Kentucky Center for Applied Energy (UK CAER) has devised a unique, integrated CO2 capture and utilization technology. CO2 from coal-fired power generation flue gas is first captured at half the operating cost of a typical aqueous CO2 capture system (CCS), distributed in an aqueous stream and then fixed by algae in bioreactors where the algae production is increased by 50% over that with a typical intermittent nutrient feeding system. Lower CCS operating cost is achieved by eliminating the flue gas pretreatment step for cooling and SO2 removal, eliminating steam extraction from the power generation steam cycle for solvent regeneration, and eliminating CO2 compression. Higher algae production is achieved by continuous, just-in-time nutrient feed to the bioreactors directly from a distributed solvent regenerator, which maintains the bioreactor pH for optimum growth. The process starts with a uniquely configured membrane absorber, where the flue gas is indirectly contacted with an ammonium hydroxide (NH4OH) solvent. Dissolved NH3 is attractive for both CO2 capture and as an algae nutrient. For CO2 capture it is inexpensive, has a low regeneration energy, is thermally- and oxidatively-stable and has a viscosity near that of water, which makes is easy to transport. Numerous studies have shown that the scrubbing capacity of NH3 is approximately 0.9-1.2 kg of CO2/kg of NH3, with a CO2 removal efficiency of ~99% and half the solvent regeneration energy than that of 30 wt% MEA[1, 2, 3]. NH3 is attractive as an algae nutrient due to its low cost. The rich NH4OH solvent is pumped to a set of distributed regenerators which are co-located with the algae bioreactors. Solvent pumping, transport and distribution reduces the balance of plant (BOP) cost compared to a typical aqueous CCS related to the flue gas duct and boost fan required to transport the flue gas. The energy required for the distributed solvent regeneration is supplied by solar-thermal panels eliminating the need for steam extraction from the power generation steam cycle. After solvent regeneration, the product stream contains both the CO2 captured from the flue gas and volatized NH3 from the solvent. This product stream is fed directly to the bioreactors, eliminating the need for compression of the CO2 stream. The relative amounts of CO2 and NH3 in the product stream are adjusted and controlled by a controlling the regeneration conditions (pressure and temperature). The continuous feed of the right ratio of nutrients overcomes the typical inhibition of algae growth resulting from frequent pH swings in the bioreactor due to unbalanced (intermittent) feeding systems for CO2 and N. Also, because the regenerators will operate at pressure and be located in close proximity to the bioreactors, there is no worry about pressure drop when sparging the gas into the algae. Sparging produces small bubbles which is beneficial for mass transfer efficiency. One known challenge when using an NH4OH solvent is high NH3 emission. Hydrophobic membranes are used for CO2 capture using an aqueous NH3 solution[4, 5] without the direct contact between flue gas and aqueous solution. Additionally, UK CAER CO2 capture and utilization process manages NH3 slip in three extra measures. First, NH3 slip is minimized by working with minimal species partial pressure, which is proportional to the concentration in the liquid. Hence, lowering the capture solvent concentration will lower the NH3 partial pressure. Second, UK CAER’s previous work has demonstrated that the addition of Zn2+ into NH3 solutions to chelate the NH3 can reduce NH3 volatility. Third, the configuration of the membrane CO2 absorber utilizes condensed water from the flue gas to continually wash the gas-side of the membrane to reduce fouling and recapture NH3 slip. Additional details about the UK CAER unique, integrated CO2 capture and utilization technology will be presented along with technology development plans. Diao, N., Q. Li, and Z. Fang. 2004. Heat transfer in ground heat exchangers with groundwater advection. International Journal of Thermal Sciences. 43: 1203-1211, He, Q., M. Chen, L. Meng, K. Liu, and W. Pan. 2004. Study on Carbon Dioxide Removal from Flue Gas by Absorption of Aqueous Ammonia. Western Kentucky University. Yeh, A.C., and H. Bai. 1999. Comparison of ammonia and monoethanolamine solvents to reduce CO2 greenhouse gas emissions. The Science of the Total Environment. 228: 121-133, Villeneuve, K., D. Roizard, J.C. Remigy, M. Iacono, and S. Rode. 2018. CO2 capture by aqueous ammonia with hollow fiber membrane contactors: Gas phase reactions and performance stability. Separation and Purification Technology, 199: 189-197, Toro Molina, C., and C. Bouallou. 2016. Carbon dioxide absorption by ammonia intensified with membrane contactors. Clean Techn Environ Policy 18, 2133–2146 (2016)

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Experimental validation of multiphysics model simulations of the thermal response of a cement clinker rotary kiln at laboratory scale

Abstract An increasing demand for buildings, transportation systems and civil infrastructure development has driven expansion of cement consumption world‐wide, producing a significant increase in related global energy demand. With approximately 7% of the world‐wide industrial energy consumption (10.7 exajoules [EJ]), the cement industry is the third most energy intensive industrial processes and a key component for concrete, the most consumed composite material in the global construction industry. In cement manufacturing, the cement kiln accounts for most of the energy consumption in the production process. As the heart of a cement plant, the cement kiln is where the kiln feed primarily containing calcium oxide (CaO), silica (SiO 2 ), alumina (Al 2 O 3 ), and iron (Fe 2 O 3 ) are thermally and chemically transformed into clinker minerals. The presented work developed a multiphysics model, designed and built a laboratory‐scale rotary cement clinker kiln, and produced cement clinker at laboratory‐scale. The model was developed to study the interaction between the various thermal, fluid dynamic and chemical interactions involved in the sintering process used to form Portland cement clinker in an effort to reduce energy use. The analytical model was validated through experimental testing using a unique laboratory‐scale rotary cement kiln developed during the investigation. Also demonstrated was the feasibility of producing clinker at laboratory scale. This modeling and lab scale tests were designed to better understand the clinker sintering process so that operational and quality decisions can be made to optimize energy consumption without compromising cement clinker quality. The computational fluid dynamics modeling was developed in COMSOL Multiphysics 6.0. The characteristics of the combustion fluid flow, concentration of species, temperature and heat transfer were studied for a turbulent flow of methane (CH 4 ) gas and oxygen (O 2 ). Theory suggests that heat transfer impacts the cement production process but the multiphysics model more accurately describes the convection, conduction, and radiant heat transfer in the kilning process and thus allows for a better understanding of the energy exchange driving the chemical reactions that produce Portland cement. Clinker minerals were formed because of appropriate burning conditions implemented during experimental model validation.

Tabares, Juan David↗
DOE OSTI2022

Machine learning prediction on the fractional free volume of polymer membranes

Fractional free volume (FFV) characterizes the microstructural level features of polymers and affects their properties including thermal, mechanical, and separation performance. Experimental measurements and theoretical analyses have been used to quantify the FFV of polymers, but challenges remain because of their limitations. Experimental measurements are laborious and based on semi empirical equations, while Bondi’s group contribution theory involves ambiguities like the determination of van der Waals volume and the choice of factor values in the theoretical equation. To efficiently evaluate the FFV of polymers, this study utilizes high-throughput molecular dynamics (MD) simulations to build a large dataset regarding polymer’s FFV. Based on this large dataset, we further build machine learning (ML) models to establish the composition-structure relation. Inspired by group contribution theory which correlates polymer’s functional groups to FFV, our ML models correlate polymer’s substructures or physico-chemical indexes to FFV. Here, our study first benchmarks the MD simulation protocol to obtain reliable FFV of polymers and then carries out high-throughput MD simulations for more than 6,500 homopolymers and 1,400 polyamides. Such a large and diverse dataset makes the well-trained ML models more generalizable, compared with the group contribution theory. The efficiency of a feed forward neural network model is further demonstrated by applying it to a hypothetical polyimide dataset of more than 8 million chemical structures. The predicted FFVs of hypothetical polyimides are further validated by MD simulations. The obtained FFVs of the 8 million polymers, plus their previously reported gas separation performances, demonstrate the promising capability of ML virtual screening for the discovery of polymer membranes with exceptional permeability/selectivity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Life-Cycle Emissions and Human Health Implications of Multi-Input, Multi-Output Biorefineries

To meaningfully broaden the supply of fuels for the transportation sector, biofuel production must be scaled up and this requires a wider array of biomass feedstocks, including agricultural residues and organic waste. Rather than pursuing conversion of lignocellulosic biomass to fuels and anaerobic digestion of wastes as separate pathways, there are economic and environmental advantages associated with integrating these processes in a single facility. However, existing research rarely goes beyond carbon footprints in quantifying the effects of such a shift in bioenergy production. In addition to CO2, CH4, and N2O, this study explores the life-cycle air pollution (NH3, volatile organic compounds, NOx, SO2, and PM2.5), marine eutrophication, acidification, and local external cost implications of biorefineries capable of taking in crop residues, food waste, and manure to produce liquid fuel, electricity, and/or other options such as renewable natural gas (RNG), hydrogen, bioplastics, and protein-rich livestock feed. Relative to a single-input, single-output baseline, biorefineries integrated with organic waste codigestion to coproduce electricity or RNG can reduce life-cycle CO2-equivalent emissions by 84-149%, and the monetized external impacts across all scenarios range from $1.07/gallon to -$0.75/gallon ethanol.

Air pollution↗
DOE OSTI2025

One-Step Radical-Induced Synthesis of Graft Copolymers for Effective Compatibilization of Polyethylene and Polypropylene

The synthesis of copolymers from high-density polyethylene (HDPE) and isotactic polypropylene (iPP) has gained increasing attention due to their ability to improve the recycling of incompatible mixed polyolefin waste feed streams. Herein, we report a new radical grafting process that yields HDPE-g-iPP copolymers from HDPE and iPP by using a commercially available peroxide. Tensile testing of brittle 70/30 HDPE/iPP mixtures with these graft copolymers added showed promising compatibilization, improving the elongation at break of the blends from 20% up to 1080%. Detailed kinetic studies coupled with thermal and rheological characterization revealed optimized conditions for HDPE and iPP macroradical coupling and a deeper understanding of the grafting reaction. This optimization yielded HDPE-g-iPP copolymers that compatibilize HDPE and iPP blends at loadings as low as 2.5 wt %. In conclusion, the versatility of this macroradical grafting reaction was demonstrated by preparing an effective compatibilizer from untreated postconsumer waste plastics.

compatibilization↗
DOE OSTI2023

Optimization of nutrient utilization efficiency and productivity for algal cultures under light and dark cycles using genome-scale model process control

Abstract Algal cultivations are strongly influenced by light and dark cycles. In this study, genome-scale metabolic models were applied to optimize nutrient supply during alternating light and dark cycles of Chlorella vulgaris . This approach lowered the glucose requirement by 75% and nitrate requirement by 23%, respectively, while maintaining high final biomass densities that were more than 80% of glucose-fed heterotrophic culture. Furthermore, by strictly controlling glucose feeding during the alternating cycles based on model-input, yields of biomass, lutein, and fatty acids per gram of glucose were more than threefold higher with cycling compared to heterotrophic cultivation. Next, the model was incorporated into open-loop and closed-loop control systems and compared with traditional fed-batch systems. Closed-loop systems which incorporated a feed-optimizing algorithm increased biomass yield on glucose more than twofold compared to standard fed-batch cultures for cycling cultures. Finally, the performance was compared to conventional proportional-integral-derivative (PID) controllers. Both simulation and experimental results exhibited superior performance for genome-scale model process control (GMPC) compared to traditional PID systems, reducing the overall measured value and setpoint error by 80% over 8 h. Overall, this approach provides researchers with the capability to enhance nutrient utilization and productivity of cell factories systematically by combining genome-scale models and controllers into an integrated platform with superior performance to conventional fed-batch and PID methodologies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Netting and pan traps fail to identify the pollinator guild of an agricultural crop

Pollinator decline is expected to cause significant reductions in food production and plant reproduction. Quantifying the impact of pollinator decline on food production requires survey methods that can identify insect and bee species responsible for pollination of specific crops. To address this issue, we compared the effectiveness of two survey methods, netting and pan traps, at capturing the pollinators of alfalfa, Medicago sativa. Alfalfa is a major component of forage for cows and an important ingredient in chicken feed. We also examined bee species richness and diversity with these two survey methods, and compared these measures among three different colors of pan traps. Netting was more effective at capturing known pollinators of alfalfa, especially those belonging to the Bombus and Apis genera. Pan traps captured a higher bee diversity relative to netting and, like previous studies, each survey method and each trap color was more efficient at capturing certain bee genera. However, without a priori knowledge of pollinators, neither survey method could identify which of the bee species captured could pollinate alfalfa. We therefore recommend direct observations when the goal of a study is to identify pollinators or link pollinator decline to food production.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

Task three: Report: STDN Antenna and preamplifier cost tradeoff study

The general goal of this task, STDN Antenna and Preamplifier G/T Study, was to determine cost-effective combinations of antennas and preamplifiers for several sets of conditions for frequency, antenna elevation angle, and rain. The output of the study includes design curves and tables which indicate the best choice of antenna size and preamplifier type to provide a given G/T performance. The report indicates how to evaluate the cost effectiveness of proposed improvements to a given station. Certain parametric variations are presented to emphasize the improvement available by reducing RF losses and improving the antenna feed.

Source record↗