Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flow separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Three-dimensional flow calculations inside SSME GGGT first stage blade rows

A numerical analysis of the first stage of the Space Shuttle Main Engine (SSME) GGGT was conducted using a 3-D Reynolds averaged Navier-Stokes flow solver. This turbine stage was designed to improve both aerodynamic efficiency and durability. The blade has an unconventional shape with a large blade thickness. No experimental data is available to verify the computational results. The objective of the current study is to analyze this turbine blade stage with a well established Navier-Stokes computational method in order to determine if the turbine is operating in the subsonic flow regime and if these are any significant separated flow regions. The stage was analyzed in a steady state flow condition. The inlet vane was analyzed with the flow conditions from the axisymmetric entire stage solution. The viscous flow solution of the first vane is used as the inlet flow condition for the rotor.

Hah, Chunill↗

Transport Phenomena in Stratified Multi-Fluid Flow in the Presence and Absence of Gravity

Experiments are being conducted to study the effects of buoyancy on planar density-stratified shear flows. A wind tunnel generates planar flows separated by an insulating splitter plate, with either flow heated, which emerge from a two-dimensional nozzle. The objective is to isolate and define the effect of gravity and buoyancy on a stratified shear layer. To this end, both stably and unstably stratified layers will be investigated. This paper reports on the results of temperature and velocity measurements across the nozzle exit plane and downstream along the nozzle center plane.

Chigier, Norman↗

Off-Design Performance of a Multi-Stage Supersonic Turbine

The drive towards high-work turbines has led to designs which can be compact, transonic, supersonic, counter rotating, or use a dense drive gas. These aggressive designs can lead to strong unsteady secondary flows and flow separation. The amplitude and extent of these unsteady flow phenomena can be amplified at off-design operating conditions. Pre-test off-design predictions have been performed for a new two-stage supersonic turbine design that is currently being tested in air. The simulations were performed using a three-dimensional unsteady Navier-Stokes analysis, and the predicted results have been compared with solutions from a validated meanline analysis.

Dorney, Daniel J.↗

An Autonomous Sensor System Architecture for Active Flow and Noise Control Feedback

Multi-channel sensor fusion represents a powerful technique to simply and efficiently extract information from complex phenomena. While the technique has traditionally been used for military target tracking and situational awareness, a study has been successfully completed that demonstrates that sensor fusion can be applied equally well to aerodynamic applications. A prototype autonomous hardware processor was successfully designed and used to detect in real-time the two-dimensional flow reattachment location generated by a simple separated-flow wind tunnel model. The success of this demonstration illustrates the feasibility of using autonomous sensor processing architectures to enhance flow control feedback signal generation.

Humphreys, William M, Jr.↗

Calculation of oblique-shock-wave laminar-boundary-layer interaction on a flat plate

A finite difference solution to the problem of the interaction between an impinging oblique shock wave and the laminar boundary layer on a flat plate is presented. The boundary layer equations coupled with the Prandtl-Meyer relation for the external flow are used to calculate the flow field. A method for the calculation of the separated flow region is presented and discussed. Comparisons between this theory and the experimental results of other investigators show fairly good agreement. Results are presented for the case of a cooled wall with an oncoming flow at Mach number 2.0 without and with suction. The results show that a small amount of suction greatly reduces the extent of the separated region in the vicinity of the shock impingement location.

Goldberg, U.↗

Wind Tunnel Testing of AFC over a Deflected Aileron on the High-Lift Common Research Model

Active flow control (AFC) using discrete fluidic actuators distributed along the span, just upstream of the deflected aileron of the 10% scale high-lift version of the Common Research Model (CRM-HL), was evaluated during a wind tunnel test in the NASA Langley 14- by 22-Foot Subsonic Tunnel. For this set of experiments, a new outboard section was fabricated incorporating a deflectable aileron. Aileron deflection angles of 0, 7.5, 16, and 25 were investigated. This experimental investigation is in response to a recent study by Boeing potential to use AFC with a drooped aileron during takeoff to improve lift-to-drag ratio (L/D) by as much as 5%, depending on AFC mass flow rate. AFC is used at deflection angles above the nominal deflection of 7.5 to control the resulting flow separation that occurs and potentially improve L/D. Improvements in aircraft low-speed L/D can affect vehicle range and/or payload. Tuft flow visualization data, steady and unsteady surface pressure data, and force and moment data are used to compare the flowfields with and without AFC. Parameters varied include actuator momentum coefficient and aileron deflection angle. The surface pressure and tuft flow visualization results indicate that without AFC, the flow over a majority of the aileron upper surface is separated for aileron deflection angles larger than 7.5. When AFC is applied, the flow is reattached to the aileron. Force and moment results show that a local increase in lift leads to an increase in L/D of at least 3.5% using mass flow rates thought to be available from air sources onboard a commercial transport.

AFC↗

Wind Tunnel Testing of AFC over a Deflected Aileron on the High-Lift Common Research Model

Active flow control (AFC) using discrete fluidic actuators distributed along the span, just upstream of the deflected aileron of the 10% scale high-lift version of the Common Research Model (CRM-HL), was evaluated during a wind tunnel test in the NASA Langley 14- by 22-Foot Subsonic Tunnel. For this set of experiments, a new outboard section was fabricated incorporating a deflectable aileron. Aileron deflection angles of 0, 7.5, 16, and 25 were investigated. This experimental investigation is in response to a recent study by Boeing potential to use AFC with a drooped aileron during takeoff to improve lift-to-drag ratio (L/D) by as much as 5%, depending on AFC mass flow rate. AFC is used at deflection angles above the nominal deflection of 7.5 to control the resulting flow separation that occurs and potentially improve L/D. Improvements in aircraft low-speed L/D can affect vehicle range and/or payload. Tuft flow visualization data, steady and unsteady surface pressure data, and force and moment data are used to compare the flowfields with and without AFC. Parameters varied include actuator momentum coefficient and aileron deflection angle. The surface pressure and tuft flow visualization results indicate that without AFC, the flow over a majority of the aileron upper surface is separated for aileron deflection angles larger than 7.5. When AFC is applied, the flow is reattached to the aileron. Force and moment results show that a local increase in lift leads to an increase in L/D of at least 3.5% using mass flow rates thought to be available from air sources onboard a commercial transport.

AFC↗

Three-dimensional flows about simple components at angle of attack

The structures of three dimensional separated flow about some chosen aerodynamic components at angle of attack are synthesized, holding strictly to the notion that streamlines in the external flow (viscous plus inviscid) and skin friction lines on the body surface may be considered as trajectories having properties consistent with those of continuous vector fields. Singular points in the fields are of limited number and are classified as simple nodes and saddles. Analogous flow structures at high angles of attack about blunt and pointed bodies, straight and swept wings, etc., are discussed, highlighting the formation of spiral nodes (foci) in the pattern of the skin friction lines. How local and global three dimensional separation lines originate and form is addressed, and the characteristics of both symmetric and asymmetric leeward wakes are described.

Peake, D. J.↗

Three-dimensional flows about simple components at angle of attack

The structures of three dimensional separated flow about some chosen aerodynamic components at angle of attack are synthesized, holding strictly to the notion that streamlines in the external flow (viscous plus inviscid) and skin friction lines on the body surface may be considered as trajectories having properties consistent with those of continuous vector fields. Singular points in the fields are of limited number and are classified as simple nodes and saddles. Analogous flow structures at high angles of attack about blunt and pointed bodies, straight and swept wings, etc., are discussed, highlighting the formation of spiral nodes (foci) in the pattern of the skin friction lines. How local and global three dimensional separation lines originate and form is addressed, and the characteristics of both symmetric and asymmetric leeward wakes are described.

Peake, D. J.↗

A numerical study of separation on a spheroid at incidence

The three-dimensional incompressible, steady and laminar flow field around a prolate spheroid at incidence is considered. The parabolized Navier-Stokes equations are solved numerically. The method can handle vortex types as well as bubble type flow separation because the pressure is one of the dependent variables. Here, the distribution of the skin friction is reported for two test cases. The first test case is a prolate spheroid of aspect ratio of 4:1 at 6 degrees incidence and Reynolds number of 1 million (based on half the major axis). The second case is a spheroid with a 6:1 aspect ratio at 10 degrees incidence and Reynolds number of 0.8 x 1 million. The properties of the flow field near the body are discussed on the basis of the pattern of the skin friction lines, and the shape of the separation lines. Favorable agreement with experimental results is obtained.

Rosenfeld, M.↗

Navier-Stokes analysis and experimental data comparison of compressible flow within ducts

Many aircraft employ ducts with centerline curvature or changing cross-sectional shape to join the engine with inlet and exhaust components. S-ducts convey air to the engine compressor from the intake and often decelerate the flow to achieve an acceptable Mach number at the engine compressor by increasing the cross-sectional area downstream. Circular-to-rectangular transition ducts are used on aircraft with rectangular exhaust nozzles to connect the engine and nozzle. To achieve maximum engine performance, the ducts should minimize flow total pressure loss and total pressure distortion at the duct exit. Changes in the curvature of the duct centerline or the duct cross-sectional shape give rise to streamline curvature which causes cross stream pressure gradients. Secondary flows can be caused by deflection of the transverse vorticity component of the boundary layer. This vortex tilting results in counter-rotating vortices. Additionally, the adverse streamwise pressure gradient caused by increasing cross-sectional area can lead to flow separation. Vortex pairs have been observed in the exit planes of both duct types. These vortices are due to secondary flows induced by pressure gradients resulting from streamline curvature. Regions of low total pressure are produced when the vortices convect boundary layer fluid into the main flow. The purpose of the present study is to predict the measured flow field in a diffusing S-duct and a circular-to-rectangular transition duct with a full Navier-Stokes computer program, PARC3D, and to compare the numerical predictions with new detailed experimental measurements. The work was undertaken to extend previous studies and to provide additional CFD validation data needed to help model flows with strong secondary flow and boundary layer separation. The S-duct computation extends the study of Smith et al, and Harloff et al, which concluded that the computation might be improved by using a finer grid and more advanced turbulence models. The present study compares results for both the Baldwin-Lomas and k-epsilon turbulence models and is conducted with a refined grid. For the transition duct, two inlet conditions were considered, the first with straight flow and the second with swirling flow. The first case permits examination of the effects of the geometric transition on the flow field, while the second case includes the rotational flow effect characteristic of a gas turbine engine.

Harloff, G. J.↗

Effect of geometry on the nose-region flow-field of shuttle entry-configurations

In order to determine the convective heat-transfer distribution for the nose region of the space shuttle entry configurations, a three-dimensional flow-field is described which may include extensive regions of separated flow. Because of the complexity of the flow field for the nose region, experimental data are needed to define the relation between the nose geometry and the resultant flow field. According to theoretical solutions of the three-dimensional boundary layer, the boundary layer separates from the leeward generator of a blunted cone at an alpha equal to the cone half-angle. Separation results from the transverse pressure gradient, i.e., the velocity derivative due to crossflow. The boundary layer limiting streamlines converge toward the singular point of sep aration. The separated region is bounded by an ordinary line of separation.

Bertin, J. J.↗

Experimental study of two separating turbulent boundary layers

A detailed study of two strong adverse pressure gradient flows, one with a free-stream velocity of 35 m/sec, at throat (producing a Re sub theta of 27000 at detachment) and another with free-stream velocity of 22 m/sec, at throat (producing a Re sub theta of 19000 at detachment) is presented. In these examples flows separate slowly and reattach very rapidly over a very short distance in a streamwise direction. In the backflow region, there appears to be a semi-logarithmically flat region in the streamwise fluctuating velocity component, u', which spreads over a definite range of y/delta. In power spectra, the flow variables phi sub upsilon upsilon (kappa sub 1 delta)/ -uv bar sub max vs. kappa sub 1 delta forms a unique set of scaling parameters for adverse pressure gradient flows. Experimental results show good agreement with previous studies.

Nagabushana, K. A.↗

Separated trailing-edge flow at a transonic Mach number

Results from an experimental investigation of a small-scale separated flow at a sharp trailing edge are presented. The separated flow was a result of sustained adverse pressure gradients. Experiments were carried out at a transonic Mach number, without any shock wave in the flow, and at a high Reynolds number. Measurements include surface pressure distributions, mean velocity, turbulent shear stress, turbulent kinetic energy, and some streamwise turbulence intensity profiles in the region from just upstream of separation to downstream into the near-wake, following wake-closure. The results show noticeable changes in the mean and turbulent quantities in the separated region although the wall adverse pressure gradients are relatively weak. Turbulent normal stress becomes important in the vicinity of separation and in the separated zone with regard to both mean-flow development and turbulence-energy production. The experimental data are used to assess the performance of two boundary-layer calculation methods.

Viswanath, P. R.↗

A dynamic stall model for analysis of cross-flow turbines using discrete vortex methods

Cross-flow turbine blades operate in an unsteady environment over large ranges of angle of attack and Reynolds number, often enduring dynamic stall. The hydrodynamics are further complicated because the circular orbit of the blades changes their effective curvature. In order to address these technical challenges with modeling cross-flow turbines, here this article presents a novel dynamic stall model with flow curvature correction. The dynamic stall model extends Beddoes-Leishman dynamic stall theory, including several effects such as proper asymptotic behavior at large (~90°) angles of attack, influence of reduced-pitch rate on the stall angle, dynamics of the flow separation point, and changes in effective camber due to flow curvature. Further, the model enables rapid hydrodynamic analysis of cross-flow turbines using free vortex methods. Important design parameters such as blade thickness and camber are explicitly accounted for in the model, which enables parametric study of turbine configurations and therefore makes the model useful for system-level turbine optimization. Numerical predictions are validated by experimental data for several cases, including ranges of blade profile, toe angle, solidity, and tip speed ratio.

16 TIDAL AND WAVE POWER↗

The application of a second generation low-order panel method - program 'Vsaero' - to powerplant installation studies

Results from the application of a second generation low-order panel method to a number of powerplant installations are presented. The method, which retains the advantages of ease of use and low operating cost of earlier panel methods while retaining the aerodynamic modelling rigor of higher-order methods was used to predict the flow in and around typical nacelles and aircraft for a wide range of conditions. The ability of the second generation low-order analysis to calculate internal flows without the leakage problems associated with earlier programs is demonstrated and correlation between calculated and measured surface pressures and flow behavior, including predicting streamlines and locating regions of separated flow, is presented.

Clark, D. R.↗

Pressure-distribution measurements on a transonic low-aspect ratio wing

Experimental surface pressure distributions and oil flow photographs are presented for a 0.90 m semispan model of NASA/Lockheed Wing C, a generic transonic, supercritical, low aspect ratio, highly 3-dimensional configuration. This wing was tested at the design angle of attack of 5 deg over a Mach number range from 0.25 to 0.96, and a Reynolds number range from 3.4 x 1,000,000 to 10 x 1,000,000. Pressures were measured with both the tunnel floor and ceiling suction slots open for most of the tests but taped closed for some tests to simulate solid walls. A comparison is made with the measured pressures from a small model in high Reynolds number facility and with predicted pressures using two three dimesional, transonic full potential flow wing codes: design code FLO22 (nonconservative) and TWING code (conservative). At the given design condition, a small region of flow separation occurred. At a Mach number of 0.82 the flow was unseparated and the surface flow angles were less than 10 deg, indicating that the boundary layer flow was not 3-D. Evidence indicate that wings that are optimized for mild shock waves and mild pressure recovery gradients generally have small 3-D boundary layer flow at design conditions for unseparated flow.

Keener, E. R.↗

An experimental study of the aerodynamic characteristics of planar and non-planar outboard wing planforms

A series of wind tunnel experiments have been conducted to investigate the aerodynamic characteristics of several planar and nonplanar wingtip planforms. Seven different configurations: base-line rectangular, elliptical, swept and tapered, swept and tapered with dihedral, swept and tapered with anhedral, rising arc, and drooping arc, were investigated for two different spans. The data are available in terms of coefficient plots of force data, flow visualization photographs, and velocity and pressure flowfield surveys. All planforms, particularly the nonplanar, have some advantages over the baseline rectangular planform. Span efficiencies up to 20-percent greater than baseline are a possibility. However, it is suggested that the span efficiency concept might need refinement for nonplanar wings. Flow survey data show the change in effective span with vortex roll-up. The flow visualization shows the occurrence of mushroom-cell-separation flow patterns at angles of attack corresponding to stall. These grow with an increase in post-stall angle of attack. For the larger aspect ratios, the cells are observed to split into sub-cells at the higher angles of attack. For all angles of attack, some amount of secondary vortex flow is observed for the planar and nonplanar out-board planforms with sweep and taper.

Naik, D. A.↗