Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geared”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Boron-epoxy-reinforced titanium aircraft landing-gear drag strut

The structural performance of a boron-epoxy-reinforced titanium drag strut, containing a bonded scarf joint and designed to the criteria of a large commercial transport, has been evaluated experimentally and analytically. The strut was exposed to two lifetimes of fatigue loading and was statically loaded to the tensile and compressive design ultimate loads. Throughout the test program no evidence of any damage in the drag strut was detected by strain-gage measurements, ultrasonic inspection, or visual observation. The bonded joint was analyzed using the NASTRAN computer program. A comparison of the strains predicted by the NASTRAN computer program with the experimentally determined values shows excellent agreement. An analytical study indicated that the nonlinear behavior of a structural spacer at each end of the strut could be explained by the inelastic behavior and possible creep of the adhesive.

Howell, W. E.↗
NASA NTRS1977

Preliminary design of a flight control system for a V/STOL airplane with geared variable pitch fans

A flight control system designed for an aircraft powered by three variable pitch fans, interconnected by shafts to provide lifting system redundancy is considered for application to a Navy Type A V/STOL aircraft with similar configurational features. The differences and similarities in the applications are discussed with emphasis on a design approach for safety in the event of failures in the propulsion and flight control systems. Differences in flying qualities and system design criteria are considered.

Gotleib, P.↗
NASA NTRS1978

Rolling element fatigue testing of gear materials

Rolling element fatigue lives of eleven alloys were evaluated. The eleven alloys studied were three nitriding alloys (Super Nitralloy, Nitralloy 135, and Nitralloy N), four case carburizing alloys (AISI 9310, CBS 600, CBS 1000M and Vasco X-2), and four throughhardening alloys (Vasco Matrix II,AISI W-1, AISI S-2 and AISI O-2). Several different heat treatments and/or melting processes were studied on the three carburizing alloy steels. Metallurgical analyses were made before and after the RC rig tests. Test data were statistically analyzed using the Weibull distribution function. B-10 lives were compared versus VIM-VAR AISI M-50 and carburized VAR AISI 9310, as reference alloys.

Nahm, A. H.↗
NASA NTRS1978

Rolling element fatigue testing of gear materials

Rolling element fatigue lives of nine alloys were evaluated in Rolling Contact (RC) rigs. Test conditions included a Hertzian stress at 4,826 MPa (700 ksi), a rolling speed of 6.23 m/sec (245 in/sec.). Tests were run with a Type I oil (MIL-L-7808G) at room temperature. B-10 lives (10% failure rate) of alloys were compared versus reference alloys, VIM-VAR AISI M-50 and VAR AISI 9310. Six case carburizing alloys (AISI 9310, CBS600, CBS1000M, EX00014, Vasco X-2 and EX00053) and three through-hardening alloys (AISI M-50, VascoMax 350 and Vasco Matrix 2 evaluated, showed RCF performance inferior or equivalent to that of AISI 9310 and AISI M-50. It was also found that the effects of vacuum melting processes, different tempering temperatures, freezing cycle during heat treating, shot peening, gold plating and chrome plating employed in the present investigation did not significantly affect RCF life.

Nahm, A. H.↗
NASA NTRS1981

A computer-aided design system geared toward conceptual design in a research environment

A computer-aided design system has recently been developed specifically for the small research group environment. The system is implemented on a Prime 400 minicomputer linked with a CDC 6600 computer. The goal was to assign the minicomputer specific tasks, such as data input and graphics, thereby reserving the large mainframe computer for time-consuming analysis codes. The basic structure of the design system consists of GEMPAK, a computer code that generates detailed configuration geometry from a minimum of input; interface programs that reformat GEMPAK geometry for input to the analysis codes; and utility programs that simplify computer access and data interpretation. The working system has had a large positive impact on the quantity and quality of research performed by the originating group. This paper describes the system, the major factors that contributed to its particular form, and presents examples of its application.

STACK S. H.↗
NASA NTRS1983

Redundant Gear Train

Tandem harmonic drives are immune to single-point failure. One mechanism continues transmitting power regardless of how other fails. Harmonic drive mechanism, combination of elliptical wave generator and tooth differential between flexible spline and circular spline produces rotational speed reduction in compact volume.

Packard, D. T.↗
NASA NTRS1983

Design study of Self-Alining Bearingless Planetary (SABP) gear

The feasibility of using the self alining, bearingless planetary (SABP) transmission in an uprated version of the OH-58 helicopter was evaluated, specific performance comparisons of this new transmission with contemporary helicopter transmission systems and with the uprated version of the OH-58 power transmission were made.

Folenta, D. J.↗
NASA NTRS1986

Scuffing and Lubrication of Gears and Bearings

New Reynolds equation developed for elastohydrodynamic-lubrication analysis. Method developed to study macro- and micro-EHL, without restriction on load applied to contact. Macro-EHL refers to lubricantfilm thickness developed in inlet zone of EHL conjunction. Powerful tool used to study scuffing. Using new approach, researchers have analyzed stress concentrations near both bump and groove in bearing surface.

Hamrock, B.↗
NASA NTRS1988

Determination of settings of a tilted head-cutter for generation of hypoid and spiral bevel gears

Kinematics of Gleason mechanisms of hypoid and spiral bevel cutting machines are considered. These mechanisms are designated to install the position and tilt of the head cutter. The tilt of the head cutter with standard blades provides the required pressure angle. The authors have developed the matrix presentation of kinematics of these meachanisms and basic equations for the required settings. An example is presented based on the developed computation procedure.

Litvin, F. L.↗