Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Silicon-rich SiO{sub 2}/SiO{sub 2} multilayers: A promising material for the third generation of solar cell

Si-rich-SiO{sub 2}(SRSO)/SiO{sub 2} multilayers (MLs) have been grown by reactive magnetron sputtering. The presence of silicon nanoclusters (Si-ncls) within the SRSO sublayer and annealing temperature influence optical absorption as well as photoluminescence. The optimized annealing temperature has been found to be 1100 deg. C, which allows the recovery of defects and thus enhances photoluminescence. Four MLs with Si-ncl size ranging from 1.5 to 8 nm have been annealed using the optimized conditions and then studied by transmission measurements. Optical absorption has been modeled so that a size effect in the linear absorption coefficient alpha (in cm{sup -1}) has been evidenced and correlated with TEM observations. It is demonstrated that amorphous Si-ncl absorption is fourfold higher than that of crystalline Si-ncls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial growth of Heusler alloy Co{sub 2}MnSi/MgO heterostructures on Ge(001) substrates

We prepared Heusler alloy Co{sub 2}MnSi/MgO heterostructures on single-crystal Ge(001) substrates through magnetron sputtering for Co{sub 2}MnSi and electron beam evaporation for MgO as a promising candidate for future generation spin-based functional devices. Structural investigations showed that the Co{sub 2}MnSi/MgO heterostructure was grown epitaxially on a Ge(001) substrate with extremely smooth and abrupt interfaces and showed the L2{sub 1} structure for the Co{sub 2}MnSi film. Furthermore, a sufficiently high saturation magnetization ({mu}{sub s}) value of 5.1 {mu}{sub B}/f.u. at 10 K, which is close to the theoretically predicted {mu}{sub s} of 5.0 {mu}{sub B}/f.u. for half-metallic Co{sub 2}MnSi, was obtained for prepared Co{sub 2}MnSi films.

36 MATERIALS SCIENCE↗

Large three-photon absorption in Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} films studied using Z-scan technique

Large picosecond nonlinearities in Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films, grown at different temperatures in situ on (100) MgO substrates using rf magnetron sputtering technique, were studied using the Z-scan technique. The nonlinear absorption mechanism, studied near 800 nm using approx2 and 25 ps pulses, switched from reverse saturable absorption type in the films deposited at temperature<600 deg. C to three-photon absorption (3PA) in the films deposited at temperature>600 deg. C. The magnitude of the 3PA coefficient was estimated to be approx10{sup -21} cm{sup 3}/W{sup 2}. Two-photon absorption (2PA) was the dominant mechanism recorded with approx6 ns pulses. The observed behavior is correlated with morphological and crystallographic texture of the films. The linear refractive index and optical band gap of the films have also been calculated and these show a strong dependence on the substrate temperature.

36 MATERIALS SCIENCE↗

Plasmonic excitations in ZnO/Ag/ZnO multilayer systems: Insight into interface and bulk electronic properties

Electron energy-loss spectroscopy experiments in transmission were carried out on silver-based multi-layer systems, consisting of a silver layer of various thicknesses (8, 10 and 50 nm) sandwiched between two Al-doped ZnO layers. The films were produced by magnetron sputtering using potassium bromide single crystals as substrates. The electronic structure of these systems was probed and analyzed with respect to their plasmonic excitations, which can be basically split up into excitations of the electrons in the bulk silver and excitations at the ZnO:Al/Ag interface. A detailed examination of the momentum dependence of the plasmon peaks revealed a positive dispersion for both, the volume and the interface plasmon, where only for the first one a quadratic behavior (as expected for a free electron gas) could be observed. Furthermore, the peak width was analyzed and set into relation to electrical conductivity measurements by calculating the plasmon lifetime and the electron scattering rate. Here, a good agreement between these different methods was obtained.

36 MATERIALS SCIENCE↗

Fabrication and physical properties of double perovskite SrLaVMoO{sub 6} thin films

SrLaVMoO{sub 6} thin films have been grown on various substrates by magnetron sputtering in Ar+H{sub 2} mixture gas. High-quality c-axis oriented SrLaVMoO{sub 6} films have been obtained in the growth temperature of 630 deg. C and Ar + 5% H{sub 2} mixture gas. The SrLaVMoO{sub 6} films showed low resistive metallic behavior, which is comparable to bulk SrLaVMoO{sub 6}. X-ray photoemission spectroscopy measurements indicate that the dominant valence state for Mo and V in the SrLaVMoO{sub 6} films is tetravalent (Mo{sup 4+}) and trivalent state (V{sup 3+}), respectively.

36 MATERIALS SCIENCE↗

Customizing electron confinement in plasma-assembled Si/AlN nanodots for solar cell applications

Size-uniform Si nanodots (NDs) are synthesized on an AlN buffer layer at low Si(111) substrate temperatures using inductively coupled plasma-assisted magnetron sputtering deposition. High-resolution electron microscopy reveals that the sizes of the Si NDs range from 9 to 30 nm. Room-temperature photoluminescence (PL) spectra indicate that the energy peak shifts from 738 to 778 nm with increasing the ND size. In this system, the quantum confinement effect is fairly strong even for relatively large (up to 25 nm in diameter) NDs, which is promising for the development of the next-generation all-Si tandem solar cells capable of effectively capturing sunlight photons with the energies between 1.7 (infrared: large NDs) and 3.4 eV (ultraviolet: small NDs). The strength of the resulting electron confinement in the Si/AlN ND system is evaluated and justified by analyzing the measured PL spectra using the ionization energy theory approximation.

36 MATERIALS SCIENCE↗

Double hysteresis loop induced by defect dipoles in ferroelectric Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} thin films

Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} (PZT80/20) thin films were deposited on the Pt(111)/Ti/SiO{sub 2}/Si(100) substrates by RF magnetron sputtering. Mainly perovskite crystalline phase with highly (202)-preferred orientation, determined by x-ray diffraction, was formed in the lead zirconate titanate (PZT)(80/20) thin films. Polarization measurements of the unannealed and aged films showed a clear double hysteresis loop. However, the double hysteresis loop phenomenon was greatly suppressed in the PZT thin films annealed under pure oxygen, and thus they exhibited larger remnant polarization (P{sub r} = 6.3 {mu}C/cm{sup 2}). The related mechanism for the appearance of constricted and double hysteresis loops was investigated to be associated with the realignment and disassociation of defect dipoles via oxygen octahedral rotations or oxygen vacancy diffusion. The butterfly-shaped C-V characteristic curve with a valley gave further evidence for double hysteresis loop characteristic in the unannealed and aged PZT thin films.

36 MATERIALS SCIENCE↗

p-type conduction induced by N-doping in {alpha}-Fe{sub 2}O{sub 3}

A p-type N-doped {alpha}-Fe{sub 2}O{sub 3} was developed by magnetron sputtering of a Fe{sub 2}O{sub 3} target in a plasma containing N{sub 2} and Ar followed by postannealing. Photoelectrochemical measurement under visible light irradiation (>410 nm) showed that N-Fe{sub 2}O{sub 3} exhibits a typical cathodic photocurrent originated from the p-type conduction. X-ray photoemission spectroscopy indicated that the atomic N incorporated substitutionally at O sites was responsible for the p-type conduction. The concentration of acceptors was very close to that for Zn-doped Fe{sub 2}O{sub 3}, a typical p-type {alpha}-Fe{sub 2}O{sub 3}. This finding would stimulate further research on p-type Fe{sub 2}O{sub 3} for solar fuel generation, etc.

36 MATERIALS SCIENCE↗

Optimization and Characterisation of Amorphous Iron Disilicide formed by Ion Beam Mixing of Fe/Si Multilayer Structures for Photovoltaic Applications

This study presents an optimization and characterization of amorphous Iron Disilicide (a-FeSi{sub 2}) synthesized using Ion Beam Mixing (IBM) of Fe/Si multilayer structures. The layers were deposited using RF magnetron sputtering, and subsequently irradiated with Ar{sup +} and Fe{sup +} beams of 150 and 200 keV. Rutherford Back Scattering (RBS) analysis was used to determine the structure and level of silicidation of the samples. The nature of the band-gap and the optical absorption coefficients were determined by optical transmission analysis. The results demonstrate that the synthesis of a-FeSi{sub 2} can be achieved using this technique, with the total level of silicidation being highly dependant upon the initial structure configuration and beam parameters. Direct band-gap energies of {approx}0.90 eV have been observed for those samples with the highest levels of silicidation, with optical absorption coefficients of {approx}10{sup 4} cm{sup -1}. Therefore this method of fabrication has been shown to produce a-FeSi{sub 2} layers without the need for post-synthesis treatment, using established technologies without compromising the optical properties that make this material such a promising semiconductor for the photovoltaics market.

36 MATERIALS SCIENCE↗

Electrical and optical properties of sputtered amorphous vanadium oxide thin films

Amorphous vanadium oxide (VO{sub x}) is a component found in composite nanocrystalline VO{sub x} thin films. These types of composite films are used as thermistors in pulsed biased uncooled infrared imaging devices when containing face centered cubic vanadium monoxide phase crystallites, and substantial fractions of amorphous material in the composite are necessary to optimize device electrical properties. Similarly, optoelectronic devices exploiting the metal-to-semiconductor transition contain the room-temperature monoclinic or high-temperature (>68 deg. C) rutile vanadium dioxide phase. Thin films of VO{sub x} exhibiting the metal-to-semiconductor transition are typically polycrystalline or nanocrystalline, implying that significant amounts of disordered, amorphous material is present at grain boundaries or surrounding the crystallites and can impact the overall optical or electronic properties of the film. The performance of thin film material for either application depends on both the nature of the crystalline and amorphous components, and in this work we seek to isolate and study amorphous VO{sub x}. VO{sub x} thin films were deposited by pulsed dc reactive magnetron sputtering to produce amorphous materials with oxygen contents {>=}2, which were characterized electrically by temperature dependent current-voltage measurements and optically characterized by spectroscopic ellipsometry. Film resistivity, thermal activation energy, and complex dielectric function spectra from 0.75 to 6.0 eV were used to identify the impact of microstructural variations including composition and density.

36 MATERIALS SCIENCE↗

The influence of A-site rare-earth for barium substitution on the chemical structure and ferroelectric properties of BZT thin films

Rare-earth (RE) doped Ba(Zr,Ti)O{sub 3} (BZT) thin films were prepared by rf-magnetron sputtering from a Ba{sub 0.90}Ln{sub 0.067}Zr{sub 0.09}Ti{sub 0.91}O{sub 3} (Ln=La, Nd) target. The films were deposited at a substrate temperature of 600 deg. C in a high oxygen pressure atmosphere. X-ray diffraction (XRD) patterns of RE-BZT films revealed a <001> epitaxial crystal growth on Nb-doped SrTiO{sub 3}, <001> and <011> growth on single-crystal Si, and a <111>-preferred orientation on Pt-coated Si substrates. Scanning electron microscopy (SEM) showed uniform growth of the films deposited, along with the presence of crystals of about half-micron size on the film's surface. Transmission electron microscopy (TEM) evidenced high crystalline films with thicknesses of about 100 nm for 30 min of sputtering. Electron-probe microanalysis (EPMA) corroborated the growth rate (3.0-3.5 nm/min) of films deposited on Pt-coated Si substrates. X-ray photoelectron spectroscopy (XPS), in depth profile mode, showed variations in photoelectron Ti 2p doublet positions at lower energies with spin-orbital distances characteristic of BaTiO{sub 3}-based compounds. The XPS analysis revealed that lanthanide ions positioned onto the A-site of the BZT-perovskite structure increasing the MO{sub 6}-octahedra distortion (M=Ti, Zr) and, thereby, modifying the Ti-O binding length. Polarization-electric field hysteresis loops on Ag/RE-doped BZT/Pt capacitor showed good ferroelectric behavior and higher remanent polarization values than corresponding non-doped system. - Graphical abstract: XPS narrow-scan spectra of Ti 2p doublets of the Nd-doped BZT films deposited on Pt-coated Si substrate.

36 MATERIALS SCIENCE↗

Physical and chemical characterization of combinatorial metal gate electrode Ta-C-N library film

This paper reports comprehensive structural and chemical analyses for the combinatorial Ta-C-N/HfO{sub 2} system, crucial data for understanding the electrical properties of Ta-C-N/HfO{sub 2}. Combinatorial Ta-C-N 'library' (composition spread) films were deposited by magnetron sputtering. Electron probe wavelength dispersive spectroscopy and x-ray fluorescence-yield near-edge spectroscopy were used to quantitatively determine the composition across these films. Scanning x-ray microdiffractometry determined that a solid solution of Ta(C,N){sub x} forms and extends to compositions (0.3<=Ta<=0.5 and 0.57<=Ta<=0.67) that were previously unknown. The thermal stability of the Ta-C-N/HfO{sub 2} library was studied using high resolution transmission electron microscopy, which shows Ta-C-N/HfO{sub 2}/SiO{sub 2}/Si exhibiting good thermal stability up to 950 deg. C.

36 MATERIALS SCIENCE↗

Characterization of rhenium oxide films and their application to liquid crystal cells

Rhenium trioxide exhibits high electronic conductivity, while its open cubic crystal structure allows an appreciable hydrogen intercalation, generating disordered solid phases, with protonic conductivity. Rhenium oxide thin films have been obtained by thermal evaporation of ReO{sub 3} powders on different substrates, maintained at different temperatures, and also by reactive magnetron sputtering of a Re metallic target. A comparative investigation has been carried out on these films, by using micro-Raman spectroscopy and x-ray diffraction. Two basic types of solid phases appear to grow in the films: a red metallic H{sub x}ReO{sub 3} compound, with distorted perovskite structures, like in the bulk material, and ordered HReO{sub 4} crystals based on tetrahedral perrhenate ions. Because of its conduction properties, the electrical and electro-optical behaviors of ReO{sub 3} films deposited on standard indium tin oxide/glass substrate have been tested inside asymmetric nematic liquid crystal cells, showing an appreciable capability of rectification of their electro-optical response, in similar way to tungsten trioxide.

36 MATERIALS SCIENCE↗

Degradation mechanisms of electron mobility in metal-oxide-semiconductor field-effect transistors with LaAlO{sub 3} gate dielectric

LaAlO{sub 3} is a promising candidate of gate dielectric for future very large scale integration devices. In this work, metal-oxide-semiconductor capacitors and transistors with LaAlO{sub 3} gate dielectric were fabricated and the electron mobility degradation mechanisms were studied. The LaAlO{sub 3} films were deposited by radio frequency magnetron sputtering. The LaAlO{sub 3} films were examined by x-ray diffraction, secondary ion mass spectroscopy, and x-ray photoelectron spectroscopy. The temperature dependence of metal-oxide-semiconductor field-effect transistors characteristics was studied from 11 K to 400 K. The rate of threshold voltage change with temperature (DELTAV{sub T}/DELTAT) is -1.51 mV/K. The electron mobility limited by surface roughness is proportional to E{sub eff}{sup -0.66} in the electric field of 0.93 MV/cm<E{sub eff}<2.64 MV/cm at 300 K and the phonon scattering is proportional to T{sup -5.6} between 300 and 400 K. Soft optical phonon scattering was used to explain the extra source of phonon scattering in LaAlO{sub 3}-gated n-channel metal-oxide-semiconductor field-effect transistors.

36 MATERIALS SCIENCE↗

Formation and Characterization of Silicon Self-assembled Nanodots

Silicon self-assembled quantum dots have been successfully prepared on corning glass (7059) substrate. The samples were fabricated using the common technique RF magnetron sputtering system depend on plasma excitation at varying growth parameters and high temperature of more than 500 deg. C. The measurements of average dots size estimated to be 36 nm is confirmed by using AFM. The PL peak located at 570 nm, informed band gap energy = 2.10 eV larger than bulk material band gap, that confirmed the miniaturized of the dots. To measure the Silicon atomic% deposit on corning glass (7059) substrate EDX has been used.

36 MATERIALS SCIENCE↗

Infrared characteristics of VO{sub 2} thin films for smart window and laser protection applications

Vanadium dioxide (VO{sub 2}) films with a low semiconductor-to-metal transition temperature of 45 Degree-Sign C were fabricated through direct current magnetron sputtering followed by a post-annealing. Atomic force microscopy measurements show that the VO{sub 2} grain size is about one hundred of nanometers. Infrared (IR) characteristic is well investigated by applying a He-Ne laser power intensity measurement, and the result reveals that the VO{sub 2} film exhibits excellent IR switching property. Furthermore, solar smart window and laser protection experiments demonstrate that the obtained VO{sub 2} thin film is a promising material for the application in related fields.

36 MATERIALS SCIENCE↗

Experimental and Theoretical Analyses of Zinc-Vacancy-Induced Room-Temperature Ferromagnetism in ZnO Films

Room-temperature ferromagnetism (RTFM) has been observed in RF magnetron sputtered ZnO films with O{sub 2} as an auxiliary gas after annealing. The films exhibit hexagonal wurtzite structure and observable ferromagnetism. A maximum of saturation magnetization of 4.75 emu/cm{sup 3} is obtained. The zinc vacancies are believed as the RTFM origin, and oxygen vacancies are not an incentive of magnetization of the ZnO films. Theoretical study based on first principles calculation is performed for better understanding of the RTFM in substance. The intrinsic physical mechanism of regulating the ferromagnetic of the ZnO film is analyzed in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗