Search NASA⌕ Search

SEARCH · Search NASA

Results for “MASK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Formation of tunable diamond micro- and nanopillars for field effect enhancement applications

Here, we developed a process for the fabrication of tunable single crystal diamond micro- and nanopillars, with tip widths ranging from 40 to 460 nm, densities ranging from 0.5 to 53.5 pillars/μm 2 , and heights greater than 4.5 μm. A self-assembled Au nanodot ensemble etch mask was formed from an annealed Au thin film. The nanodot diameter and density can be tuned using the initial film thickness. The pillars were etched from the nanodot mask using an RIE O 2 plasma, which has infinite selectivity for the diamond when applied at low RF powers (50 W). Finally, the pillars can be sharpened to ~40 nm tip widths by annealing in air at 650 °C. These pillars can be used for applications such as field effect enhancement of diamond photocathode devices, enhancement of optical emission from N-V centers, and antireflective coatings.

36 MATERIALS SCIENCE↗

Synchrotron Infrared Confocal Microspectroscopic Spatial Resolution or a Customized Synchrotron/focal Plane Array System Enhances Chemical Imaging of Biological Tissue or Cells

Spectroscopy and spatially resolved chemical imaging of biological materials using an infrared microscope is greatly enhanced with confocal image plane masking to 5-6 {mu} with a third generation microspectrometer and illumination with a synchrotron radiation source compared to globar illuminated and array detection or singly masked system. Steps toward this instrumental achievement are illustrated with spectra and images of biological tissue sections, including single cells, brain, aorta, and grain specimens. A recent, customized synchrotron infrared microspectrometer installation enables focal plane array detection to achieve both rapid and high definition chemical imaging. Localization of the ester carbonyl population in single modified starch granules was used to provide direct comparison of the two advanced imaging capabilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SORIS - A standoff radiation imaging system

The detection of radiological and special nuclear material within the country’s borders is a crucial component of the national security network. Being able to detect small amounts of radiological material at large distances is especially important for search applications. To provide this capability General Electric’s Research Center has developed, as a part of DNDO’s standoff radiation detection system advanced technology demonstration (SORDS-ATD) program, a standoff radiation imaging system (SORIS). This vehicle-based system is capable of detecting weak sources at large distances in relatively short times. To accomplish this, GE has developed a novel coded aperture detector based on commercial components from GE Healthcare. An array of commercial gamma cameras modified to increase the system efficiency and energy range are used as position sensitive detectors. Unlike typical coded aperture systems, however, SORIS employs a non-planar mask and thus does not suffer the typical limitations of partially encoded regions giving it a wide field of view. Source identification is done using both low-statistics anomaly indicators and conventional high-statistics algorithms being developed by Pacific Northwest National Laboratory. The results of scanned areas and threats identified are displayed to the user and overlaid on satellite imagery.commercial components from GE Healthcare. An array of commercial gamma cameras modified to increase the system efficiency and energy range are used as position sensitive detectors. Unlike typical coded aperture systems, however, SORIS employs a non-planar mask and thus does not suffer the typical limitations of partially encoded regions giving it a wide field of view. Source identification is done using both low-statistics anomaly indicators and conventional high-statistics algorithms being developed by Pacific Northwest National Laboratory. The results of scanned areas and threats identified are displayed to the user and overlaid on satellite imagery.

Coded aperture imager↗

Low-resolution gamma-ray spectrometry for an information barrier based on a multi-criteria template-matching approach

Gamma-ray spectrometry has been successfully employed to identify unique items containing special nuclear materials. Template information barriers have been developed in the past to confirm items as warheads by comparing their gamma signature to the signature of true warheads. Their development has, however, not been fully transparent, and they may not be sensitive to some relevant evasion scenarios. Here, we develop a fully open template information barrier concept, based on low-resolution measurements, which, by design, reduces the extent of revealed sensitive information. The concept is based on three signatures of an item to be compared to a recorded template. The similarity of the spectrum is assessed by a modification of the Kolmogorov–Smirnov test to confirm the isotopic composition. The total gamma count rate must agree with the template as a measure of the projected surface of the object. In order to detect the diversion of fissile material from the interior of an item, a polyethylene mask is placed in front of the detector. Neutrons from spontaneous and induced fission events in the item produce 2.223 MeV gamma rays from neutron capture by hydrogen-1 in the mask. This peak is detected and its intensity scales with the item's fissile mass. This analysis is based on MCNP Monte Carlo simulations of various plutonium configurations suggests that this concept can distinguish a valid item from a variety of invalid ones. The concept intentionally avoids any assumptions about specific spectral features, such as looking for specific gamma peaks of specific isotopes, thereby facilitating a fully unclassified discussion. Finally, by making all aspects public and allowing interested participants to contribute to the development and benchmarking, we enable a more open and inclusive discourse on this matter.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Micro-bunching for generating tunable narrow-band THz radiation at the FAST photoinjector

This paper presents expected THz radiation spectra emitted by micro-bunched electron beams produced using a slit-mask placed within a magnetic chicane in the FAST (Fermilab Accelerator Science and Technology) electron injector at Fermilab. Our purpose is to generate tunable narrow-band THz radiation with a simple scheme in a conventional photo-injector. Using the slit-mask in the chicane, we create a longitudinally micro-bunched beam after the chicane by transversely slicing an energy chirped electron bunch at a location with horizontal dispersion. In this paper, we discuss the theory related to the micro-bunched beam structure, the beam optics, the simulation results of the micro-bunched beam and the frequency spectra. Here, we also discuss the results of a simple method to observe the micro-bunching on a transverse screen monitor using a skew quadrupole placed in the chicane.

43 PARTICLE ACCELERATORS↗

SHarD: A beam dynamics simulation code for dielectric laser accelerators based on spatial harmonic field expansion

In order to demonstrate acceleration of electrons to relativistic scales by an on chip dielectric laser accelerator (DLA), a ponderomotive focusing scheme capable of capturing and transporting electrons through nanometer-scale apertures over extended interaction lengths has been proposed. Here we present a Matlab-based numerical code (SHarD) utilizing a spatial harmonic expansion of the fields within the dielectric structure to simulate the evolution of the beam phase space distribution in this scheme. The code can be used to optimize key-parameters for the accelerator performance such as the final energy, transverse spot size evolution and total number of electrons accelerated through currently fabricated structures. Eventually, the simulation model will be applied to inform the phase mask profile to be added to a pulse front tilt drive laser pulse using a liquid crystal mask in the experimental setup being assembled at UCLA Pegasus Laboratory.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A rotor-based multileaf collimator for beam shaping

We introduce a new style of multileaf collimator which employs rotors with angularly dependent radius to control the masking aperture: a rotor-based multileaf collimator (RMLC). Using a padlock-inspired mechanism, a single motor can set dozens of rotors, i.e. leaves, independently. This is especially important for an ultra-high vacuum (UHV) compatible MLC, since this reduces the number of actuators and vacuum feedthroughs required by more than an order of magnitude. This new RMLC will complement previous work employing a UHV compatible MLC with an emittance exchange beamline to create arbitrarily shaped beams on demand. A feed-forward control system which abstracts away the complexity of the RMLC operation, and is adaptable to real beamline conditions, is discussed and demonstrated in simulation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Observation of tantalum deposition and growth on TiB2 and ZrB2 from PISCES-RF deuterium and helium plasma exposures

Deuterium and helium plasma exposures on bulk TiB2 and ZrB2 samples were performed using the PISCES-RF linear plasma device. 40 and 90 eV deuterium ion plasma exposures were performed at 240 and 800 °C sample temperatures, and 80 eV helium ion plasma exposures were performed at 800 °C sample temperatures. Following plasma exposures, it was discovered that two plasma conditions (90 eV deuterium and 80 eV helium at 800 °C) resulted in thick (>200 nm) tantalum-rich (>10 at%) surface features on the targets, presumably from tantalum sourced from a tantalum adapter mask or cap used as part of the target holder. This work aims to characterize these tantalum-rich features and examine the mechanisms of impurity deposition.Plasma-induced surface morphology of the tantalum-rich surface layers depends on plasma properties and target temperature and chemistry. Greater titanium sputtering compared to zirconium resulted in more distinct surface features in the TiB2 samples compared to the ZrB2 samples via increased, prompt deposition onto tantalum surface impurities. There is still uncertainty as to why thick tantalum deposition only occurred under some plasma exposure conditions but not others; it is likely due to tantalum sputtering by a combination of boron molecules from the targets and carbon-impurities in the tantalum mask or targets. Impurity driven surface features are a well-documented phenomena in samples exposed to plasma from linear plasma device facilities—this work confirms the occurrence of this and emphasizes the need for chemistry characterization of isolated post-mortem surface features in plasma-exposed samples.

Nuckols, Lauren↗

Stress accommodation in nanoscale dolan bridges designed for superconducting qubits

Josephson junctions are the principal circuit element in numerous superconducting quantum information devices and can be readily integrated into large-scale electronics. However, device integration at the wafer scale necessarily depends on having a reliable, high-fidelity, and high-yield fabrication method for creating Josephson junctions. When creating Al/AlO x based superconducting qubits, the standard Josephson junction fabrication method relies on a sub-micron suspended resist bridge, known as a Dolan bridge, which tends to be particularly fragile and can often times fracture during the resist development process, ultimately resulting in device failure. In this work, we demonstrate a unique Josephson junction lithography mask design that incorporates stress-relief channels. Our simulation results show that the addition of stress-relief channels reduces the lateral stress in the Dolan bridge by more than 70% for all the bridge geometries investigated. In practice, our novel mask design significantly increased the survivability of the bridge during device processing, resulting in 100% yield for over 100 Josephson junctions fabricated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Seeing the whole picture: Methods for getting the most from micro X-ray computed tomography of TRISO nuclear fuel particles

Tristructural isotropic (TRISO) coated fuel particles are a nuclear fuel form under extensive study for use in advanced nuclear reactor concepts. TRISO fuels are subjected to high temperature neutron irradiations and then examined to assess their performance by determining fission product retention and studying morphological changes. Micro X-ray computed tomography is one method of nondestructively studying the effects of TRISO performance. This work addresses the need for image processing to remove X-ray tomographic reconstruction artifacts that prevent the study of TRISO features, as the TRISO particles’ high Z kernel can introduce metal artifacts that degrade the image quality in the surrounding low Z coating layers. These metal artifacts were reduced by imaging the TRISO particles with both high- and low-energy X-rays and applying a mask to the radiographs obtained with low-energy X-rays to digitally remove the dense fuel kernel region. These masked radiographs were then used to produce a tomographic reconstruction which was combined with the tomographic reconstruction of the high-energy data. This enabled the relatively-low-density TRISO buffer layer to be examined in more detail, providing information on irradiation induced dimensional changes of the coatings. This methodology, which helps see the full picture of a TRISO particle, is not limited to nuclear fuels but can be applied to systems that contain highly attenuating material surrounded by less dense materials.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Acquisition of STEM Images by Adaptive Compressive Sensing

Compressive Sensing (CS) allows a signal to be sparsely measured first and accurately recovered later in software [1]. In scanning transmission electron microscopy (STEM), it is possible to compress an image spatially by reducing the number of measured pixels, which decreases electron dose and increases sensing speed [2,3,4]. The two requirements for CS to work are: (1) sparsity of basis coefficients and (2) incoherence of the sensing system and the representation system. However, when pixels are missing from the image, it is difficult to have an incoherent sensing matrix. Nevertheless, dictionary learning techniques such as Beta-Process Factor Analysis (BPFA) [5] are able to simultaneously discover a basis and the sparse coefficients in the case of missing pixels. On top of CS, we would like to apply active learning [6,7] to further reduce the proportion of pixels being measured, while maintaining image reconstruction quality. Suppose we initially sample 10% of random pixels. We wish to select the next 1% of pixels that are most useful in recovering the image. Now, we have 11% of pixels, and we want to decide the next 1% of “most informative” pixels. Active learning methods are online and sequential in nature. Our goal is to adaptively discover the best sensing mask during acquisition using feedback about the structures in the image. In the end, we hope to recover a high quality reconstruction with a dose reduction relative to the non-adaptive (random) sensing scheme. In doing this, we try three metrics applied to the partial reconstructions for selecting the new set of pixels: (1) variance, (2) Kullback-Leibler (KL) divergence using a Radial Basis Function (RBF) kernel, and (3) entropy. Figs. 1 and 2 display the comparison of Peak Signal-to-Noise (PSNR) using these three different active learning methods at different percentages of sampled pixels. At 20% level, all the three active learning methods underperform the original CS without active learning. However, they all beat the original CS as more of the “most informative” pixels are sampled. One can also argue that CS equipped with active learning requires less sampled pixels to achieve the same value of PSNR than CS with pixels randomly sampled, since all the three PSNR curves with active learning grow at a faster pace than that without active learning. For this particular STEM image, by observing the reconstructed images and the sensing masks, we find that while the method based on RBF kernel acquires samples more uniformly, the one on entropy samples more areas of significant change, thus less uniformly. The KL-divergence method performs the best in terms of reconstruction error (PSNR) for this example [8].

Xie, Weiyi↗

Development of High-Efficiency GaAs Solar Cells Grown on Nanopatterned GaAs Substrates

One approach to reducing the cost of high-efficiency III–V devices involves adding patterned layers to heteroepitaxial or homoepitaxial substrates to facilitate substrate removal and reuse. However, few studies have focused explicitly on high-quality devices grown over patterned substrates, which is required for any cost saving to be beneficial. In this work, we demonstrate the growth of high-efficiency GaAs solar cells on GaAs substrates patterned with an array of nanoscale SiOX mask stripes. We show that reducing the pattern dimensions to submicron length scales with nanoimprint lithography enables defect-free coalescence. By varying the growth conditions, faceting of the epilayer material during overgrowth of the patterned mask was also controlled. A V/III ratio of 200 during MOVPE overgrowth produced smooth coalesced epilayers, which is desirable for the growth of subsequent device layers. Inverted GaAs front homojunction devices grown on patterned GaAs(001) substrates achieved threading dislocation densities below 5 × 10 5 cm –2 and maintained >23% solar cell efficiencies at one sun illumination, equivalent to control devices grown on unpatterned epi-ready substrates.

14 SOLAR ENERGY↗

Zirconium-Based Metal–Organic Frameworks as Reusable Antibacterial Peroxide Carriers for Protective Textiles

Countries around the world have sought efficient protective coverings, including masks, gowns, and fabrics, for air purification to protect people against infectious diseases. However, the demand for significant quantities of disposable protective textiles poses a global challenge, especially when the production of protective gear is suspended due to COVID-19 outbreaks in factories and along supply lines. Therefore, the development of reusable, self-decontaminating protective masks and coverings loaded with disinfectants, such as antibacterial peroxide species, presents an attractive strategy to fight against bacteria risks. In this work, we incorporated persulfate ions, which serve as stable active peroxide precursors, into two porous zirconium-based metal–organic frameworks (Zr-MOFs), enabling these materials to act as regenerable reservoirs for the slow release of biocidal hydrogen peroxide upon hydrolysis by contact with humid air. Single-crystal X-ray diffraction studies reveal the two different coordination motifs for the persulfate ions, which can either bridge between two adjacent nodes or coordinate to a single node depending on both the node connectivity and the distances between open metal sites. The active peroxide precursors within the porous Zr-MOF carriers are stable during storage and easily regenerated once consumed. Importantly, these persulfate-loaded Zr-MOFs can be integrated onto textiles using a facile aqueous in-situ growth procedure, and these composites demonstrate potent and reusable biocidal activity against both Gram-negative bacteria and Gram-positive bacteria. Altogether, this approach presents a viable strategy to develop robust protective textiles capable of rapidly deactivating pathogens.

36 MATERIALS SCIENCE↗

Interfacial Coupling-Induced Ferromagnetic Insulator Phase in Manganite Film

Interfaces with subtle differences in atomic and electronic structures in perovskite ABO 3 heterostructures often yield intriguingly different properties, yet their exact roles remain elusive. Here, we report an integrated study of unusual transport, magnetic, and structural properties of Pr 0.67 Sr 0.33 MnO 3 film on SrTiO 3 substrate. The variations in the out-of-plane lattice constant and BO 6 octahedral rotation across the Pr 0.67 Sr 0.33 MnO 3 /SrTiO 3 interface strongly depend on the thickness of the Pr 0.67 Sr 0.33 MnO 3 film. In the 12-nm film, a new interface-sensitive ferromagnetic polaronic insulator (FI') phase is formed during the cubic-to-tetragonal phase transition of SrTiO 3 , apparently due to the enhanced electron–phonon interaction and atomic disorder in the film. The transport properties of the FI' phase in the 30-nm film are masked because of the reduced interfacial coupling and smaller interface-to-volume ratio. In conclusion, this work demonstrates how thickness-dependent interfacial coupling leads to the formation of a theoretically predicted ferromagnetic–polaronic insulator, as illustrated in a new phase diagram, that is otherwise ferromagnetic metal (FM) in bulk form.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nucleation Selectivity and Lateral Coalescence of GaAs over Graphene on Ge(111)

Here we use epitaxial lateral overgrowth (ELO) to produce semimetallic graphene nanostructures embedded in a semiconducting GaAs matrix for potential applications in plasmonics, THz generation and detection, and tunnel junctions in multijunction solar cells. We show that (1) the combination of low sticking coefficient and fast surface diffusion on graphene enhances nucleation selectivity at exposed regions of the substrate and (2) high growth temperatures favor efficient lateral overgrowth, coalescence, and planarization of epitaxial GaAs films over the graphene nanostructures. Our work provides a more complete understanding of ELO using graphene masks, as opposed to more conventional dielectric masks, and enables new types of metal/semiconductor nanocomposites.

36 MATERIALS SCIENCE↗

Dopamine-Mediated Polymer Coating Facilitates Area-Selective Atomic Layer Deposition

Area-selective atomic layer deposition (ALD) has the potential to significantly improve current fabrication approaches by introducing a bottom-up process in which robust and conformal thin films are selectively deposited onto patterned substrates. This bottom-up approach requires selective areas of the substrates to be masked to inhibit deposition. Spontaneous self-assembly and organization of a mask, incorporating adhesion and other functions, are particularly attractive for this role as they do not require a separate patterning step. In this work, we make use of the pH/light tunability of catechol adhesion to develop a catechol-functionalized polymer that exhibits tunable adhesion strengths on different materials based on their specific chemistry. Tunable selective deposition was shown between metal/metal oxide substrates by controlling the local pH. Moreover, by controlling the adhesion strength through UV light, the deposition of hafnium oxide (HfO 2 ) during ALD was successfully inhibited.

36 MATERIALS SCIENCE↗

Cobalt-Group 13 Complexes Catalyze CO 2 Hydrogenation via a Co(-I)/Co(I) Redox Cycle

The Co(-I) dihydrogen complexes, [(η 2 -H 2 )CoML]-, where ML is the group 13 metalloligand, N(o-(NCH 2 PiPr 2 )C 6 H 4 ) 3 M, and M is Al, Ga, or In, were previously reported ( J. Am. Chem. Soc. 2017, 139, 6570-6573). In this work, the related Co(-I) end-on dinitrogen adducts, [(N 2 )CoML]-, were isolated and investigated as precatalysts for CO 2 hydrogenation. The Co–Ga catalyst was highly active, achieving 19,200 formate turnovers with an initial turnover frequency of 27,000 h –1 under 34 atm of 1:1 CO 2 /H 2 and using Verkade’s proazaphosphatrane as a base at ambient temperature. The Co–Al catalyst was moderately active, while the Co–In complex was inactive. Hence, tuning the group 13 ion greatly influences the catalytic activity at the Co site. To elucidate the role of the group 13 support, experimental and theoretical mechanistic studies of the Co–Ga and Co–Al catalysts were conducted. The Co(-I) H 2 species are potent hydride donors with estimated thermodynamic hydricities (ΔG° H– ) of 32.0(1) and 37.4(1) kcal/mol in CH 3 CN for M = Al and Ga, respectively. By acting as masked Co(I) dihydrides, the Co(-I) H 2 species operate via an unusual Co(-I)/Co(I) redox cycle. After hydride transfer to CO 2 , the resulting intermediate is the Co(I) hydride complex, HCoML, which was independently synthesized and structurally characterized for M = Al and Ga. The Gibbs free energy for H 2 binding, ΔG° bind (1 atm), to generate (η 2 -H 2 )HCoML was slightly more favorable for HCoGaL (-4.2(1) kcal/mol) than for HCoAlL (-2.7(1) kcal/mol). In the subsequent step, the deprotonation reaction to regenerate the initial catalyst was much more favorable for (η 2 -H 2 )HCoGaL (pK a of 31.4, CH 3 CN) than for (η 2 -H 2 )HCoAlL (pK a of 34.3). Finally, the straightforward substitution of Al with Ga perturbs the energy profile of the catalytic reaction (|ΔΔG° H– | = 5.4 kcal/mol, |ΔΔG° bind | = 1.5 kcal/mol, and |ΔΔG° K a | = 4.0 kcal/mol) and thus provides a thermodynamic rationale for the higher catalytic efficiency of Co–Ga over Co–Al.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlocal Metasurfaces with Lithographically Defined Vertical Symmetry Breaking

Nonlocal metasurfaces have garnered significant interest for applications that require customized and enhanced light–matter interactions in a flat form factor. These metasurfaces are distinctive for their ability to systematically control some of the fundamental properties of optical resonances by manipulating the in-plane symmetry of the lattice. Recent theoretical works have suggested that engineering the symmetry of a metasurface not just within the plane of the metasurface but also in the vertical or out-of-plane direction enables improved control of additional fundamental properties, especially chirality. However, standard nanofabrication processes cannot readily support elaborate vertical symmetry breaking such as nanostructure heights or slopes that deliberately vary across the footprint of a metasurface. Here, in this work, we experimentally demonstrate a scalable method to lithographically define the vertical symmetry of nonlocal metasurfaces by selectively eroding the etch mask during the etch process. Moreover, as the etch mask erosion rates depend on the in-plane size of individual nanostructures, we introduce and experimentally demonstrate a compatible design framework that enables versatile control over the properties of optical resonances. The results hold promise for chiral nonlocal metasurfaces with highly customized behavior.

metamaterial↗