Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Indexing amyloid peptide diffraction from serial femtosecond crystallography: new algorithms for sparse patterns

Special methods are required to interpret sparse diffraction patterns collected from peptide crystals at X-ray free-electron lasers. Bragg spots can be indexed from composite-image powder rings, with crystal orientations then deduced from a very limited number of spot positions. Still diffraction patterns from peptide nanocrystals with small unit cells are challenging to index using conventional methods owing to the limited number of spots and the lack of crystal orientation information for individual images. New indexing algorithms have been developed as part of the Computational Crystallography Toolbox (cctbx) to overcome these challenges. Accurate unit-cell information derived from an aggregate data set from thousands of diffraction patterns can be used to determine a crystal orientation matrix for individual images with as few as five reflections. These algorithms are potentially applicable not only to amyloid peptides but also to any set of diffraction patterns with sparse properties, such as low-resolution virus structures or high-throughput screening of still images captured by raster-scanning at synchrotron sources. As a proof of concept for this technique, successful integration of X-ray free-electron laser (XFEL) data to 2.5 Å resolution for the amyloid segment GNNQQNY from the Sup35 yeast prion is presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Blocks and residual stresses in sapphire rods of different crystallographic orientations grown by the Stepanov method

The formation of blocks in shaped sapphire rods of two crystallographic orientations has been investigated. It is shown that, when growth occurs in the direction of the optical c axis, blocks are formed with a higher probability than in the case of growth in the a direction. A model of formation of blocks in rods of different orientations is proposed. The distribution of residual stresses over sapphire rod cross sections is measured by conoscopy. It is found that stresses increase from the middle of a rod to its periphery and reach 20 MPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Ab Initio Study of Electronic and Magnetic Properties in ZnO-Doped and Co-doped by Vanadium and Silver

Based upon the ab initio of spin density functional calculation, the electronic and magnetic properties of Zn{sub 1−x}M{sub x}O (M = Ag or V) and Zn{sub 1−x−y}A{sub x}B{sub y}O (A = V; B = Ag) are investigated, using the Korringa-Kohn-Rostoker (KKR) method coupled with the coherent potential approximation (CPA). The total and partial densities of state are calculated. The effect of concentration values in Zn{sub 1−x}V{sub x}O and Zn{sub 1−x−y}V{sub x}Ag{sub y}O are deduced. Moreover, the magnetic disorder local moment (DLM) and the total energy are obtained for different concentration values of doped and co-doped zinc oxide (ZnO).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

The creation of high-temperature superconducting cables of megawatt range in Russia

Urgent problems of the power industry in the 21st century require the creation of smart energy systems, providing a high effectiveness of generation, transmission, and consumption of electric power. Simultaneously, the requirements for controllability of power systems and ecological and resource-saving characteristics at all stages of production and distribution of electric power are increased. One of the decision methods of many problems of the power industry is the development of new high-efficiency electrical equipment for smart power systems based on superconducting technologies to ensure a qualitatively new level of functioning of the electric power industry. The intensive research and development of new types of electrical devices based on superconductors are being carried out in many industrialized advanced countries. Interest in such developments has especially increased in recent years owing to the discovery of so-called high-temperature superconductors (HTS) that do not require complicated and expensive cooling devices. Such devices can operate at cooling by inexpensive and easily accessible liquid nitrogen. Taking into account the obvious advantages of superconducting cable lines for the transmission of large power flows through an electrical network, as compared with conventional cables, the Federal Grid Company of Unified Energy System (JSC FGC UES) initiated a research and development program including the creation of superconducting HTS AC and DC cable lines. Two cable lines for the transmitted power of 50 MVA/MW at 20 kV were manufactured and tested within the framework of the program.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Electronic structure study of TiB{sub 2} and Ti{sub 2}B

In this paper, the electronic properties of TiB{sub 2} and Ti{sub 2}B are computed within the framework of Density Functional Theory (DFT) based on Linear Combination of Atomic Orbitals (LCAO) method. In the present calculations, the generalized gradient approximation (GGA) proposed by Perdew-Burke-Erenzerhof (PBE) and Becke’s scheme are considered to treat the correlation and exchange effects respectively. TiB{sub 2} crystallizes in the hexagonal AlB{sub 2} type structure which is designated as C32 with the space group P6/mmm. While the crystal structure of Ti{sub 2}B described in this paper is isomorphous to the body centered tetragonal (Al{sub 2}Cu - type) structure with space group I4/mcm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Master equation emulation and coherence preservation with classical control of a superconducting qubit

Open quantum systems are a topic of intense theoretical research. The use of master equations to model a system's evolution subject to an interaction with an external environment is one of the most successful theoretical paradigms. General experimental tools to study different open system realizations have been limited, and so it is highly desirable to develop experimental tools which emulate diverse master equation dynamics and give a way to test open systems theories. In this paper we demonstrate a systematic method for engineering specific system-environment interactions and emulating master equations of a particular form using classical stochastic noise in a superconducting transmon qubit. We also demonstrate that non-Markovian noise can be used as a resource to extend the coherence of a quantum system and counteract the adversarial effects of Markovian environments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Parameter extraction for a SPICE model of an hTron superconducting thermal switch

Efficiently simulating large circuits is crucial to the development of superconducting nanowire-based electronics. However, current simulation tools for this technology are not adapted to the scaling of circuit size and complexity. We focus on the multilayered heater-nanocryotron (hTron), a promising superconducting nanowire-based switch used in applications such as superconducting nanowire single-photon detector readout. Previously, the hTron was modeled using traditional finite-element methods, which fall short in simulating systems at a larger scale. An empirical-based method would be better adapted to this task, enhancing both simulation speed and agreement with experimental data. In this work, we perform switching current and activation delay measurements on 17 hTron devices. We then develop a method for extracting physical fitting parameters used to characterize the devices. We build a SPICE behavioral model that reproduces the static and transient device behavior using these parameters, and validate it by comparing its performance to a model developed in prior work, showing an improvement in simulation time by several orders of magnitude. Furthermore, our model provides circuit designers with a tool to help understand the hTron’s behavior during all design stages, thus enabling broader use of the hTron across various new areas of application.

Caloritronics↗
DOE OSTI2023

Prediction of superconductivity in metallic boron–carbon compounds from 0 to 100 GPa by high-throughput screening

Boron–carbon compounds have been shown to have feasible superconductivity. In our earlier paper [Zheng et al., Phys. Rev. B, 2023, 107, 014508], we identified a new conventional superconductor of LiB 3 C at 100 GPa. Here, we aim to extend the investigation of possible superconductivity in this structural framework by replacing Li atoms with 27 different cations from periods 3, 4, and 5 under pressures ranging from 0 to 100 GPa. Using the high-throughput screening method of zone-center electron–phonon interaction, we found that ternary compounds like CaB 3 C, SrB 3 C, TiB 3 C, and VB 3 C are promising candidates for superconductivity. The consecutive calculations using the full Brillouin zone confirm that they have a T c of <31 K at moderate pressures. In conclusion, our study demonstrates that fast screening of superconductivity by calculating zone-center electron–phonon coupling strength is an effective strategy for high-throughput identification of new superconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Ground State Structure of BaFeO{sub 3}: Density Functional Theory Calculations

Using density functional theory calculations, the ground state structure of BaFeO{sub 3} (BFO) is investigated with local spin density approximation (LSDA). Cubic, tetragonal, orthorhombic, and rhombohedral types BFO are considered to calculate the formation enthalpy. The formation enthalpies reveal that cubic is the most stable structure of BFO. Small energy difference between the cubic and tetragonal suggests a possible tetragonal BFO. Ferromagnetic (FM) and anitiferromagnetic (AFM) coupling between the Fe atoms show that all the striochmetric BFO are FM. The energy difference between FM and AFM shows room temperature ferromagnetism in cubic BFO in agreement with the experimental work. The LSDA-calculated electronic structures are metallic in all studied crystallographic phases of BFO. Calculations including the Hubbard potential U, i.e. LSDA + U, show that all phases of BFO are half-metallic consistent with the integer magnetic moments. The presence of half-metallicity is discussed in terms of electronic band structures of BFO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Theoretical Study of Doped and Co-doped Gallium Nitride with (Cr, Ni): an LDA-SIC and Monte Carlo Study

Using a composition of first-principle density functional theory (DFT) calculations and Monte Carlo simulation with the calculation within the self-interaction-correction local-density approximation, the electronic, magnetic, and optical properties of doped and co-doped GaN (Ga{sub 1−x}Cr{sub x}N, Ga{sub 1−x}Ni{sub x}N) and GaN (Ga{sub 1−2x}Cr{sub x}Ni{sub x}N) (x = 0.03 and 0.06), respectively, have been investigated. Our results have proven that the half-metallic ferromagnetic state still persists of co-doped GaN. In comparing the total energies, ab initio calculations certify the magnetic-state stability of the ferromagnetic phase compared with the spin-glass state. The exchange interactions obtained from the ab initio calculations were used as input parameters in a classical Ising model by Monte Carlo simulation to confirm the half-metallic ferromagnetic states with high Neel temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

The First-Principle Study of the Electronic Structure, Ferromagnetic and Thermoelectric Properties of Spinel Alloy FeAl{sub 2}O{sub 4} Using mBJ Functional Approach

In this research work, the modified Becke and Johnson potential has been used to realize the actual electronic states and band gap properties of FeAl{sub 2}O{sub 4}. Ferromagnetism is illustrated in terms of John-Teller energy and exchange energies involved in the system due to electron spin. Moreover, the exchange constants also support the ferromagnetism in the studied compound. The reduction of the magnetic moment of Fe from its free space value and the shifting of the magnetic moment to nonmagnetic sites are the consequence of strong magnetization. In the end, the electrical conductivity and Seebeck coefficient incorporated to give a high value of the power factor and thermal efficiency for energy renewable devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Study of the Electronic Structure, Magnetic and Elastic Properties and Half-Metallic Stability on Variation of Lattice Constants for CoFeCrZ (Z = P, As, Sb) Heusler Alloys

Structural, elastic, magnetic and electronic properties of CoFeCrZ (Z = P, As, Sb) Heusler alloys in their YI-type structure have been computed by density functional theory-based WIEN2k code within generalized gradient approximation for exchange correlation functions. Values of formation energy and elastic constants verify the stability of these alloys. True half metallic ferromagnetic behaviour with 100% spin polarization and good band gap in the minority spin are obtained for all the alloys. Magnetic moment of these alloys is 4.00 μ{sub B}, which matches well with the value predicted from Slater-Pauling rule. Half-metallicity is maintained over a wide range of lattice constants making these alloys promising for spintronics device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Ab Initio Theoretical Prediction of Structural, Electronic, and Magnetic Properties in the 3d (Mn)-Doped Zinc-Blende MgSe: A DFT-mBJ Approach

In this paper, we have investigated the structural, electronic, and magnetic properties of magnesium selenium (MgSe) doped with transition metal manganese (Mn) impurity in the cubic diluted magnetic semiconductor (DMS) zinc blende structure. The compounds which we are interested are as Mg{sub 1−x}Mn{sub x}Se where x change between 0 and 1 by step 0.25. All properties are studied, using first-principles calculation of density functional theory under the framework of the full-potential linearized augmented plane waver (FP-LAPW). In our study, we employed the Wu-Cohen generalized approximation (WC-GGA) to optimize the crystal structure, whereas Tran-Blaha modified Becke-Johnson potential (TB-mBJ) as a new functional was applied to compute the electronic and magnetic properties in order to get some better degree of precision. The electronic band structures and density of state plots reveal ferromagnetic semiconducting behavior in these compounds, and the exchange constants N{sub 0}α and N{sub 0}β are calculated to validate the effects resulting from exchange splitting process. Moreover, for each concentration x, the value of total magnetic moment has been estimated to equal to 5 μ{sub B}. The important magnetic moments values obtained in these compounds indicate the potential for their use in spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Modulating the Electronic Properties and Magnetism of Bilayer Phosphorene with Small Gas Molecules Adsorbing

First-principles calculations based on the density functional theory have been performed to investigate the physisorption of small gas molecules, including CO, H{sub 2}, H{sub 2}O, NH{sub 3}, NO, NO{sub 2}, and O{sub 2}, on the surface of bilayer phosphorene. The calculated results show that (1) CO, NH{sub 3}, NO, and O{sub 2} molecules act as charge donors, whereas H{sub 2}O, H{sub 2}, and NO{sub 2} molecules serve as charge acceptors. (2) The interaction between O{sub 2} molecule and bilayer phosphorene is strongest among all the researched gas molecules.(3) The physisorption of gas molecules on bilayer phosphorene produces prominent charge transfer, which not only makes phosphorene a promising candidate as a gas sensor, but also provides a valid approach to changing the polarity of phosphorene. (4) The band structure of phosphorene is also modulated by decorating with gas molecules, the NO, O{sub 2}, and NO{sub 2} adsorbed bilayer phosphorene system exhibits magnetism, and NO (O{sub 2})-adsorbed phosphorene is a typical n(p)-type semiconductor. (5) In addition, the band gap of CO/H{sub 2}O adsorbed bilayer phosphorene decreases by exerting increasing external electric fields, which suggests that applying an external electric field would be an effective way to tune the electronic properties of phosphorene and broaden the way to the application of phosphorene in nanoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Effect of Intrinsic Defects on Electronic and Magnetic Properties in Tm-Doped GaN: First-Principles Calculations

Based on the density functional theory, we investigate the electronic and magnetic properties of various types of defect complexes formed by dopant Tm and Ga vacancies, N vacancies, or O interstitial in Tm-doped GaN. Formation energies are first calculated for all defect complexes to assess their stability. The single Tm dopant is found to introduce the local magnetic moment of about 2 μ{sub B}/Tm in GaN. However, in the case of defect complexes, the magnetic moments of Tm can be suppressed by the existence of Ga vacancies around it, while the presence of N vacancies or O interstitial does not influence the magnetic moment of Tm. In addition, each Ga vacancy in the neutral charge state induces the local magnetic moment of about 2.1 μ{sub B} and one octahedral O interstitial can lead to the local moment of about 1.6 μ{sub B}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Magnetic Properties and Electronic Structure of Ni/C Multilayer Films

The magnetic properties of Ni/C multilayers were investigated using vibrating sample magnetometer and ferromagnetic resonance (FMR). Spin wave resonances were seen in FMR and the spin wave was found to be sustained through whole layers. The interlayer coupling constant was small pointing out a weak exchange coupling between Ni films through C spacers. The FMR linewidth, in parallel geometry, of the uniform mode decreases with the increase in Ni thickness from 30 to 300 Å which can be understood by considering interfacial effects. The magnetization decreases with decreasing Ni thickness due to the structural imperfections associated with the presence of Ni{sub 1−x}C{sub x} alloys at the interface. Density functional theory (DFT) has been performed to shed light on the decrease in magnetic moment at the interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

First-Principles and Thermodynamic Simulation of Elastiс Stress Effect on Energy of Hydrogen Dissolution in Alpha Iron

Mobile hydrogen, when dissolving in metals, redistributes due to the density gradients and elastic stresses, and enables destruction processes or phase transformations in local volumes of a solvent metal. It is rather important in solid state physics to investigate these interactions. The first-principle calculations performed in terms of the density functional theory, are used for thermodynamic simulation of the elastic stress effect on the energy of hydrogen dissolution in α-Fe crystal lattice. The paper presents investigations of the total energy of Fe–H system depending on the lattice parameter. As a result, the relation is obtained between the hydrogen dissolution energy and stress. A good agreement is shown between the existing data and simulation results. The extended equation is suggested for the chemical potential of hydrogen atom in iron within the local stress field. Two parameters affecting the hydrogen distribution are compared, namely local stress and phase transformations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

A Quantum-Based Approach to Predict Primary Radiation Damage in Polymeric Networks

Initial atomistic-level radiation damage in chemically reactive materials is thought to induce reaction cascades that can result in undesirable degradation of macroscale properties. Ensembles of quantum-based molecular dynamics (QMD) simulations can accurately predict these cascades, but extracting chemical insights from the many underlying trajectories is a labor-intensive process that can require substantial a priori intuition. We develop here a general and automated graph-based approach to extract all chemically distinct structures sampled in QMD simulations and apply our approach to predict primary radiation damage of polydimethylsiloxane (PDMS), the main constituent of silicones. A postprocessing protocol is developed to identify underlying polymer backbone structures as connected components in QMD trajectories. Furthermore, these backbones form a repository of radiation-damaged structures. A scheme for extracting and updating a library of isomorphically distinct structures is proposed to identify the spanning set and aid chemical interpretation of the repository. The analyses are applied to ensembles of cascade QMD simulations in which the four element types in PDMS are selectively excited in primary knock-on atom events. Our approach reveals a much higher degree of combinatorial complexity in this system than was inferred through radiolysis experiments. Probabilities are extracted for radiation-induced network changes including formation of branch points, carbon linkages, cycles, bond scissions, and carbon uptake into the Si–O siloxane backbone network. The general analysis framework presented here is readily extendable to modeling chemical degradation of other polymers and molecular materials and provides a basis for future quantum-informed multiscale modeling of radiation damage.

36 MATERIALS SCIENCE↗