Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Bayesian performance evaluation of evapotranspiration models based on eddy covariance systems in an arid region

Abstract. Evapotranspiration (ET) is a major component of the land surface processinvolved in energy fluxes and energy balance, especially in the hydrologicalcycle of agricultural ecosystems. While many models have been developed aspowerful tools to simulate ET, there is no agreement on which model bestdescribes the loss of water to the atmosphere. This study focuses on twoaspects, evaluating the performance of four widely used ET models andidentifying parameters, and the physical mechanisms that havesignificant impacts on the model performance. The four tested models arethe Shuttleworth–Wallace (SW) model, Penman–Monteith (PM) model,Priestley–Taylor and Flint–Childs (PT–FC) model, and advection–aridity (AA)model. By incorporating the mathematically rigorous thermodynamicintegration algorithm, the Bayesian model evidence (BME) approach is adoptedto select the optimal model with half-hourly ET observations obtained at aspring maize field in an arid region. Our results reveal that the SW model has thebest performance, and the extinction coefficient is not merely partitioningthe total available energy into the canopy and surface but also includingthe energy imbalance correction. The extinction coefficient is wellconstrained in the SW model and poorly constrained in the PM model but notconsidered in PT–FC and AA models. This is one of the main reasons that theSW model outperforms the other models. Meanwhile, the good fitting of SWmodel to observations can counterbalance its higher complexity. In addition,the detailed analysis of the discrepancies between observations and modelsimulations during the crop growth season indicate that explicit treatmentof energy imbalance and energy interaction will be the primary way offurther improving ET model performance.

54 ENVIRONMENTAL SCIENCES↗

Conforming quadrilaterals meshes on the cubed sphere.

The cubed sphere geometry, obtained by inscribing a cube in a sphere and mapping points between the two surfaces using a gnomonic (central) projection, is commonly used in atmospheric models because it is free of polar singularities and is well-suited for parallel computing. Global meshes on the cubed-sphere typically project uniform (square) grids from each face of the cube onto the sphere, and if refinement is desired then it is done with non-conforming meshes - overlaying the area of interest with a finer uniform mesh, which introduces so-called hanging nodes on edges along the boundary of the fine resolution area. An alternate technique is to tile each face of the cube with quadrilaterals without requiring the quads to be rectangular. These meshes allow for refinement in areas of interest with a conforming mesh, providing a smoother transition between high and low resolution portions of the grid than non-conforming refinement. The conforming meshes are demonstrated in HOMME, NCAR's High Order Method Modeling Environment, where two modifications have been made: the dependence on uniform meshes has been removed, and the ability to read arbitrary quadrilateral meshes from a previously-generated file has been added. Numerical results come from a conservative spectral element method modeling a selection of the standard shallow water test cases.

99 GENERAL AND MISCELLANEOUS↗

Multiphase Flow Analysis in Hydra-TH

This talk presents an overview of the multiphase flow efforts with Hydra-TH. The presentation begins with a definition of the requirements and design principles for multiphase flow relevant to CASL-centric problems. A brief survey of existing codes and their solution algorithms is presented before turning the model formulation selected for Hydra-TH. The issues of hyperbolicity and wellposedness are outlined, and a three candidate solution algorithms are discussed. The development status of Hydra-TH for multiphase flow is then presented with a brief summary and discussion of future directions for this work.

97 MATHEMATICS AND COMPUTING↗

REVIEW OF RESULTS FOR THE OECD/NEA PHASE VII BENCHMARK: STUDY OF SPENT FUEL COMPOSITIONS FOR LONG TERM DISPOSAL

This paper summarizes the problem specification and compares participants results for the OECD/NEA/WPNCS Expert Group on Burn-up Credit Criticality Safety Phase VII Benchmark Study of Spent Fuel Compositions for Long-Term Disposal. The Phase VII benchmark was developed to study the ability of relevant computer codes and associated nuclear data to predict spent fuel isotopic compositions and corresponding keff values in a cask configuration over the time duration relevant to spent nuclear fuel (SNF) disposal. The benchmark was divided into two sets of calculations: (1) decay calculations out to 1,000,000 years for provided pressurized-water-reactor (PWR) UO2 discharged fuel compositions and (2) burnup credit criticality calculations for a representative cask model at selected time steps. Contributions from 15 organizations and companies in 10 countries were submitted to the Phase VII benchmark exercise. This paper provides a description of the Phase VII benchmark and detailed comparisons of the participants isotopic compositions and keff values that were calculated with a diversity of computer codes and nuclear data sets. Differences observed in the calculated time-dependent nuclide densities are attributed to different decay data or code-specific numerical approximations. The variability of the keff results is consistent with the evaluated uncertainty associated with cross-section data.

Radulescu, Georgeta↗

Apollo

Modern performance portability frameworks provide application developers with a flexible way to determine how to run application kernels, however, they provide no guidance as to the best configuration for a given kernel. Apollo provides a model-generation framework that, when integrated with the RAJA library, uses lightweight decision tree models to select the fastest execution configuration on a per-kernel basis

Beckingsal, David↗

A Knowledge Graph Approach for the Secondary Use of Cancer Registry Data

Population-based central cancer registries collect valuable structured and unstructured data primarily for cancer surveillance and research, enhancing insights into clinical features associated with cancer occurrence, cancer treatment, and cancer outcomes to guide interventions which reduce the cancer burden. Cancer registries primarily collect data on (1) cancer type (case or tumor); (2) patient demographics such as age, gender, and residential address at time of diagnosis; (3) planned first course of treatment; and (4) date of last contact, vital status, and cause of death. Cancer registry data is dynamic, structured data, which is extracted from many unstructured sources such as electronic healthcare records, and consolidated for reporting and other purposes. While available advanced analytic tools such as SEER*Stat have the ability to build SAS queries, we, however, explore an innovative knowledge graph approach to organizing cancer registry data for advanced analytics and visualization, which has unique advantages over approaches of existing tools. This innovative knowledge graph approach semantically enriches the data and easily enables linkage with third-party data, which can better explain variation in outcomes. We have developed a prototype knowledge graph based on data from the Louisiana Tumor Registry and other publicly available datasets including Behavioral Risk Factor Surveillance System, Clinical Trials, DBpedia, GeoNames, Rural-Urban Continuum Codes, and Semantic MEDLINE. The resource description framework (RDF) data model was selected to represent our knowledge graph, which contains more than 25 billion triples and is ~4TB in storage size. To exhibit the benefits of the knowledge graph approach, we used scenario specific queries, which find the relationships between cancer treatment sequences and outcomes. To illustrate its ease of use in iterative analysis, the knowledge graph was linked to external datasets for performing complex queries across multiple datasets. In addition, we used knowledge graphs to identify data discrepancies and to handle schema changes. Finally, we visualized the knowledge graph to discover data patterns. Our results demonstrate this graph-based solution enables cancer researchers to execute complex queries and more easily perform iterative analyses to improve understanding of cancer registry data. In the future, we would like to use high-performance computing (HPC) resources for faster-generating hypotheses with clinical potential from our knowledge graph.

Hasan, S M Shamimul↗

Detailed analysis of geothermal potential in Crescent Valley, north-central Nevada

This study has synthesized geological, geochemical, and geophysical data sets to elucidate the structural architecture and history of the Crescent basin in order to assess its geothermal potential. The Crescent basin is a complex composite basin, consisting primarily of multiple east-tilted half grabens and horst blocks bounded by several major faults of variable strike. Fault kinematic data indicate a present-day west-northwesttrending least principal stress, which in turn suggests that north-northeast-striking normal faults have relatively high slip and dilation tendency. However, a protracted history of changing Cenozoic extension directions has produced a mosaic of fault patterns, which has generated both segmented fault geometries and multiple fault intersections. These structural complexities have ultimately primed the basin for geothermal activity. Detailed analyses and application of the play fairway methodology have respectively denoted and ranked 12 favorable structural settings capable of hosting geothermal fluids in the Crescent basin. Of the 12 favorable structural settings, five were identified as having a higher likelihood of hosting a relatively high-temperature (>130°C) geothermal system, including Hand-Me-Down Creek, Hot Springs Point, and three other unnamed areas. The Hand-Me-Down Creek hybrid structural setting along the Crescent Valley fault is the only documented relatively high temperature geothermal system identified in the basin. It contains an active 87°C hot spring actively depositing sinter and geothermometry greater than 170°C (possibly >180°C). Future exploration efforts at Hand-Me-Down Creek would benefit from focusing on targeting high permeability zones at depth utilizing densely spaced electromagnetic surveys, fluid flow modeling, and selective drilling that targets specific fault intersections within the greater step-over at depth. The Hot Springs Point hybrid structural setting along the Dry Hills fault hosts a geothermal system, but geothermometry, spring temperatures, and well temperatures indicate that fluids do not exceed ~100°C. Three other relatively promising areas include a fault intersection in the central part of the basin and two step-overs (relay ramps) along the Crescent Valley fault, but additional exploration is needed at these sites, such as 2-m temperature surveys in the dry season, measuring deeper subsurface temperatures through temperature-gradient drilling, and collecting water samples through geoprobe drilling to estimate geothermometry.

15 GEOTHERMAL ENERGY↗

Deploying a Model Predictive Traffic Signal Control Algorithm - A Field Deployment Experiment Case Study: Preprint

This paper presents a field deployment experiment of a real-time traffic signal control algorithm. We implemented the Model Predictive Control (MPC) algorithm based on Virtual Phase-Link (VPL) model. We selected the deployment locations and times based on an energy saving potential concept. We developed a set of experiment systems to enable the deployment including sensing, processing, and actuating components. We tested the systems rigorously before the experiment days. We reported the key procedures on the experiment days including the steps took, real-time control procedure, and the monitoring of the experiment. We evaluated the impact of the deployment with the changes in delay and energy consumption.

deployment↗

Laser Processing on the Surface of Niobium Superconducting Radio-Frequency Accelerator Cavities

Superconducting Radio frequency (SRF) niobium cavities are at the heart of an increasing number of particle accelerators. Their performance is dominated by a several nm thick layer at the interior surface. Maximizing its smoothness is found to be critical and aggressive chemical treatments are employed to this end. We describe laser-induced surface melting as an alternative ?greener? approach. Modeling guided selection of parameters for irradiation with a Q-switched Nd:YAG laser. The resulting topography was examined by SEM, AFM and Stylus Profilometry. Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. The U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce this manuscript for U.S. Government purposes.

Singaravelu, Senthil↗

Geological Thermal Energy Storage (GeoTES) Charged with Solar Thermal Technology Using Depleted Oil/Gas Reservoirs and Carnot-Battery Technique Using Shallow Reservoirs: Preprint

Geological thermal energy storage (GeoTES) utilizes the underground reservoirs to storage and dispatch energy per given demand schedule over a time scale up to seasons of a year. The energy input can be of various sources/forms; in this paper, we investigate 1) the GeoTES technology with solar thermal hybridization and using depleted oil/gas reservoirs; 2) the GeoTES technology with heat pumps charged by excess renewable electricity and using low-temperature shallow reservoirs. For each GeoTES technology, we carry out the suitability analysis of candidate reservoirs, develop initial techno-economic models, and validate the model with selected case study. The paper provides an overview of our technical progress on the topics of concern and aims to promote a wider acceptance of the GeoTES technologies in the future energy market.

Carnot battery↗

Incremental Clustering Algorithm For Earth Science Data Mining

Remote sensing data plays a key role in understanding the complex geographic phenomena. Clustering is a useful tool in discovering interesting patterns and structures within the multivariate geospatial data. One of the key issues in clustering is the specication of appropriate number of clusters, which is not obvious in many practical situations. In this paper we provide an extension of G-means algorithm which automatically learns the number of clusters present in the data and avoids over estimation of the number of clusters. Experimental evaluation on simulated and remotely sensed image data shows the effectiveness of our algorithm.

58 GEOSCIENCES↗

Estimated Chemical Warfare Agent Surface Clearance Goals for Remediation Pre-Planning

Health-based surface clearance goals, in units of mg/cm2, have been developed for the persistent chemical warfare agents sulfur mustard (HD) and nerve agent VX as well as their principal degradation products. Selection of model parameters and critical receptor (toddler child) allow calculation of surface residue estimates protective for the toddler child, the general population and adult employees of a facilty that has undergone chemical warfare agent attack.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Reinforcement learning for online adaptation of model predictive controllers: Application to a selective catalytic reduction unit

Here we present a novel application of reinforcement learning (RL) for online dynamic tuning of model predictive controllers (MPC). Applying a state-action-reward-state-action (SARSA) algorithm for temporal difference learning with a control-specific reward function improves the error tracking performance of a standard MPC formulation. The proposed RL approach is also readily adaptable to other MPCs, or entirely different control approaches. Practical details for the implementation of the RL-MPC algorithm are also presented. The proposed algorithm is applied to a case study of controlling nitrogen oxide (NO x ) emissions in an industrial selective catalytic reduction (SCR) unit, a control problem characterized by significant nonlinearity and time delay. Along with an RL-MPC formulation for NOx control, another MPC is proposed to mitigate ammonia slip and decrease ammonia consumption in the SCR. Results showing the efficacy of the RL-MPC for NO x control through learning and implementation on the nonlinear SCR dynamic model are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Classification of Nuclear Reactor Operations Using Spatial Importance and Multisensor Networks

Distributed multisensor networks record multiple data streams that can be used as inputs to machine learning models designed to classify operations relevant to proliferation at nuclear reactors. The goal of this work is to demonstrate methods to assess the importance of each node (a single multisensor) and region (a group of proximate multisensors) to machine learning model performance in a reactor monitoring scenario. This, in turn, provides insight into model behavior, a critical requirement of data-driven applications in nuclear security. Using data collected at the High Flux Isotope Reactor at Oak Ridge National Laboratory via a network of Merlyn multisensors, two different models were trained to classify the reactor’s operational state: a hidden Markov model (HMM), which is simpler and more transparent, and a feed-forward neural network, which is less inherently interpretable. Traditional wrapper methods for feature importance were extended to identify nodes and regions in the multisensor network with strong positive and negative impacts on the classification problem. These spatial-importance algorithms were evaluated on the two different classifiers. The classification accuracy was then improved relative to baseline models via feature selection from 0.583 to 0.839 and from 0.811 ± 0.005 to 0.884 ± 0.004 for the HMM and feed-forward neural network, respectively. While some differences in node and region importance were observed when using different classifiers and wrapper methods, the nodes near the facility’s cooling tower were consistently identified as important—a conclusion further supported by studies on feature importance in decision trees. Node and region importance methods are model-agnostic, inform feature selection for improved model performance, and can provide insight into opaque classification models in the nuclear security domain.

Tibbetts, Jake↗

Nomograms for Prediction of Outcome With or Without Adjuvant Radiation Therapy for Patients With Endometrial Cancer: A Pooled Analysis of PORTEC-1 and PORTEC-2 Trials

Background: Postoperative radiation therapy for stage I endometrial cancer improves locoregional control but is without survival benefit. To facilitate treatment decision support for individual patients, accurate statistical models to predict locoregional relapse (LRR), distant relapse (DR), overall survival (OS), and disease-free survival (DFS) are required. Methods and Materials: Clinical trial data from the randomized Post Operative Radiation Therapy for Endometrial Cancer (PORTEC-1; N=714 patients) and PORTEC-2 (N=427 patients) trials and registered group (grade 3 and deep invasion, n=99) were pooled for analysis (N=1240). For most patients (86%) pathology review data were available; otherwise original pathology data were used. Trial variables which were clinically relevant and eligible according to data constraints were age, stage, given treatment (pelvic external beam radiation therapy (EBRT), vaginal brachytherapy (VBT), or no adjuvant treatment, FIGO histological grade, depth of invasion, and lymph-vascular invasion (LVSI). Multivariate analyses were based on Cox proportional hazards regression model. Predictors were selected based on a backward elimination scheme. Model results were expressed by the c-index (0.5-1.0; random to perfect prediction). Two validation sets (n=244 and 291 patients) were used. Results: Accuracy of the developed models was good, with training accuracies between 0.71 and 0.78. The nomograms validated well for DR (0.73), DFS (0.69), and OS (0.70), but validation was only fair for LRR (0.59). Ranking of variables as to their predictive power showed that age, tumor grade, and LVSI were highly predictive for all outcomes, and given treatment for LRR and DFS. The nomograms were able to significantly distinguish low- from high-probability patients for these outcomes. Conclusions: The nomograms are internally validated and able to accurately predict long-term outcome for endometrial cancer patients with observation, pelvic EBRT, or VBT after surgery. These models facilitate decision support in daily clinical practice and can be used for patient counseling and shared decision making, selecting patients who benefit most from adjuvant treatment, and generating new hypotheses.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Orbital-selective Mott phases of a one-dimensional three-orbital Hubbard model studied using computational techniques

A recently introduced one-dimensional three-orbital Hubbard model displays orbital-selective Mott phases with exotic spin arrangements such as spin block states [J. Rincón et al., Phys. Rev. Lett. 112, 106405 (2014)]. In this paper we show that the constrained-path quantum Monte Carlo (CPQMC) technique can accurately reproduce the phase diagram of this multiorbital one-dimensional model, paving the way to future CPQMC studies in systems with more challenging geometries, such as ladders and planes. The success of this approach relies on using the Hartree-Fock technique to prepare the trial states needed in CPQMC. In addition, we study a simplified version of the model where the pair-hopping term is neglected and the Hund coupling is restricted to its Ising component. The corresponding phase diagrams are shown to be only mildly affected by the absence of these technically difficult-to-implement terms. This is confirmed by additional density matrix renormalization group and determinant quantum Monte Carlo calculations carried out for the same simplified model, with the latter displaying only mild fermion sign problems. Lastly, we conclude that these methods are able to capture quantitatively the rich physics of the several orbital-selective Mott phases (OSMP) displayed by this model, thus enabling computational studies of the OSMP regime in higher dimensions, beyond static or dynamic mean-field approximations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗