Search NASA⌕ Search

SEARCH · Search NASA

Results for “Program characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Approach for the isotopic characterization of irradiated start-up sources for disposal at WIPP - 15674

The National Nuclear Security Administration, Global Threat Reduction Initiative (GTRI)/ Off-site Source Recovery Program (OSRP) requires an approved final disposition pathway for sealed irradiated startup sources with uncertain irradiation histories. To create this path a reliable method is required to determine yields of transmutation, fission and activation products contained within the source at the time of disposal. Because of the uncertain histories of these sources, a number of likely histories are modeled with the code ORIGEN in order to establish the bounds of the radioisotope yields. The ORIGEN simulations are confirmed with gamma spectroscopy, specifically examining the activities of several fission and transmutation isotopes. These calculations, coupled with other previously established characterization techniques for transuranic neutron sources, will be used to establish a waste profile that is in compliance with Waste Isolation Pilot Plant (WIPP) waste acceptance criteria. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Panel Session 62: Progress on Deep Repository Programs Around the World

This panel session focused on the progress of deep repository programs, worldwide. While efforts on a deep geological repository for SNF/UNF and HLW in the USA were terminated in 2010, several other repository programs continue to make considerable progress and deserve to be recognized. Panelists were invited from national, multi-national, and international repository programs and organizations to report upon the status and future as well as the perceived reasons underlying the success and the failure of components of their respective repository program. This panel provided a forum for interested parties to present, exchange, and take advantage of, as appropriate, repository progress, challenges, concepts/designs and other lessons learned around the world, including site characterization, site selection, research and development, licensing, construction, operation, and public acceptance and participation. Presentations proposed include: 1 - Cigeo (French Deep Geological Repository Project) update 2018 (Daniel Delort, Andra (France)); 2 - Progress on Deep Geological Repository Programs Around the World (Bruce McKirdy, Radioactive Waste Management (United Kingdom)); 3 - Geological disposal facility in Belgium (Didier Leonard, ONDRAF/NIRAS (Belgium))

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Efficient Cytosolic Delivery Using Crystalline Nanoflowers Assembled from Fluorinated Peptoids

The design and synthesis of biocompatible nanomaterials as cargoes for the intracellular delivery of therapeutic proteins or genes have attracted intense attention because of their promise for use in therapeutics. Despite the advances in this area, very few nanomaterials can be efficiently delivered to the cytosol. To address these challenges, we designed and synthesized crystalline nanoflower-like particles from fluorinated sequence-defined peptoids; the crystallinity and fluorination of these particles enabled highly efficient cytosolic delivery with minimal cytotoxicity. We delivered these particles, 80% appear to diffuse in the cytosol. Furthermore, these nanocrystals can carry mRNA for instance and effectively delivered into cytosol for gene transfection, demonstrating the generality of our nanocrystals. Our results indicate that self-assembly of crystalline nanomaterials from fluorinated peptoids paves a new way toward development of nanocargoes with efficient cytosol gene delivery. Y. Song and M. Wang contributed equally to this work. This work was supported by start-up funds from Washington State University. Peptoid synthesis work was supported by the Materials Synthesis and Simulation Across Scales (MS3) Initiative through the LDRD fund at Pacific Northwest National Laboratory (PNNL). Assembly of peptoid particles and their structural characterizations were supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Biomolecular Materials Program at PNNL. XRD work was conducted at the Advanced Light Source with support from the Molecular Foundry, at Lawrence Berkeley National Laboratory, both of which are supported by the Office of Science, under Contrast No. DE-AC02-05CH11231. PNNL is multi-program national laboratory operated for Department of Energy by Battelle under Contract No. DE-AC05-76RL01830.

peptoids, nanocrystal, cytosol delivery, endosome ↗

Sulfur-Reducing Additives Based on Aluminosilicates Al-SBA-15 and Al-SBA-16 for Cracking catalysts

Sulfur-reducing additives for fluid catalytic cracking (FCC) catalysts based on mesoporous aluminosilicates Al-SBA-15 and Al-SBA-16 were synthesized and characterized using FTIR spectroscopy, transmission electron microscopy, low-temperature N{sub 2} adsorption/desorption, and thermally programmed desorption of NH3. Catalytic experiments were performed using a commercial zeolite-containing FCC catalyst and the additives (10 wt.%). It was found that all synthesized materials were active for reducing sulfur in liquid catalytic cracking products. The S content in the liquid cracking products obtained using an additive of 3% La-Al-SBA-15/Al{sub 2}O{sub 3} (50:50) decreased by 36% as compared to the same parameter obtained using the commercial catalyst with no additive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined Meteorological and Hydrologic Uncertainties Shape Projections of Future Soil Moisture in the Eastern United States

Physical hazards pose risks to many critical systems. Designing adaptive measures to mitigate these risks is challenging due to large uncertainties in modeling future hazards and the associated sectoral responses. Here, we help address this challenge in a hydrologic context by examining the combined role of meteorological forcing and hydrologic parameter uncertainties in shaping projections of future soil moisture. By encoding a simple conceptual water balance model in a differentiable programming framework, we facilitate fast runtimes and an efficient calibration, enabling an improved uncertainty analysis. We characterize uncertainty in model parameters by calibrating against different target data sets and by using several loss functions. We then convolve the resulting parameter ensemble with a set of Earth system model projections to produce a large ensemble (2,340 members) of daily soil moisture simulations. Focusing on the eastern United States, we find that most ensemble members project a drying of soils across the region, although some simulate wetter conditions throughout this century. Our ensemble shows an increase in the frequency and intensity of dry extremes while there is less agreement for wet extremes. We conduct sensitivity analyses on several soil moisture signatures to measure the relative influence of meteorological and hydrologic uncertainties across space and time. Both meteorological and hydrologic factors contribute consistently to uncertainty surrounding long-term trends, while changes to both wet and dry soil extremes are typically more sensitive to hydrologic parameter uncertainty. Our results underscore the need to account for varied sources of uncertainty when developing long-term hydrometeorological projections.

Lafferty, David C. [University of Illinois Urbana‐↗

Visualizing novel connections and genetic similarities across diseases using a network-medicine based approach

Understanding the genetic relationships between human disorders could lead to better treatment and prevention strategies, especially for individuals with multiple comorbidities. A common resource for studying genetic-disease relationships is the GWAS Catalog, a large and well curated repository of SNP-trait associations from various studies and populations. Some of these populations are contained within mega-biobanks such as the Million Veteran Program (MVP), which has enabled the genetic classification of several diseases in a large well-characterized and heterogeneous population. Here we aim to provide a network of the genetic relationships among diseases and to demonstrate the utility of quantifying the extent to which a given resource such as MVP has contributed to the discovery of such relations. We use a network-based approach to evaluate shared variants among thousands of traits in the GWAS Catalog repository. Our results indicate many more novel disease relationships that did not exist in early studies and demonstrate that the network can reveal clusters of diseases mechanistically related. Finally, we show novel disease connections that emerge when MVP data is included, highlighting methodology that can be used to indicate the contributions of a given biobank.

59 BASIC BIOLOGICAL SCIENCES↗

Progress Toward Simulating Departure from Nucleate Boiling at High-Pressure Applications with Selected Wall Boiling Closures

Recently, a Eulerian-based two-fluid computational fluid dynamics (CFD) framework with a wall heat flux partitioning approach has been intensively investigated for departure from nucleate boiling (DNB) simulation under the U.S. Department of Energy–funded Consortium for Advanced Simulation of Light Water Reactors (CASL) program. Understanding of the DNB characteristics over a range of pressurized water reactor–like operating conditions and accurate prediction of boiling crisis in the nuclear power system have been grand challenges because of the large impact of DNB on reactor safety and operational economics. The ultimate goal of this task in the CASL program is to introduce a robust multiphase CFD–based DNB modeling framework that is capable of characterizing an entire boiling history in which the wall boiling mode experiences the following through multiple stages of heat transfer mode: (1) single-phase convective heat transfer, (2) nucleate boiling heat transfer, and (3) identification of the departure of nucleate boiling. To validate the CASL boiling model, we have benchmarked simulated DNB over three different flow channel configurations (pipe flow, 5 × 5 fuel bundle with mixing vane tests, and 5 × 5 fuel bundle without mixing vane tests) against experimental measurements, and the validation result with open literature is reported. The DNB detection criteria in the simulation are checked by monitoring the peak wall temperature, wall dryout factor, and net energy balance. In addition to the DNB performance test, some preliminary sensitivity results on closure model selection are reported to address the prediction capability of local void profile against measurements. The boiling simulation tested in this study exhibits a maximum deviation of 24% from the measured DNB value in a high-pressure (i.e., 138 bars) subcooled pipe flow test. The ranges of operating conditions are as follows: 1650 to 2650 kg/m 2 ·s for mass flux and 8.5 to 96 K for subcooled inlet temperature. The deviation is even reduced to 7% when the subcooled temperature is less than 40 K. Besides accuracy, base practice guidelines for DNB detection criteria are tested by monitoring three simulation variables: (1) maximum wall temperature, (2) wall dryout factor (i.e., K-value), and (3) energy balance. Numerical robustness of DNB simulation is largely achieved in most of the validation test except for a few high subcooled test cases.

42 ENGINEERING↗

Uncertainty Analysis of Consequence Management Data Products

An interlaboratory effort has developed a probabilistic framework to characterize uncertainty in data products that are developed by the US Department of Energy Consequence Management Program in support of the Federal Radiological Monitoring and Assessment Center. The purpose of this paper is to provide an overview of the probability distributions of input variables and the statistical methods used to propagate and quantify the overall uncertainty of the derived response levels that are used as contours on data products due to the uncertainty in input parameters. Uncertainty analysis results are also presented for several study scenarios. This paper includes an example data product to illustrate the potential real-world implications of incorporating uncertainty analysis results into data products that inform protective action decisions. Data product contours that indicate areas where public protection actions may be warranted can be customized to an acceptable level of uncertainty. Finally, the investigators seek feedback from decision makers and the radiological emergency response community to determine how uncertainty information can be used to support the protective action decision-making process and how it can be presented on data products.

61 RADIATION PROTECTION AND DOSIMETRY↗

Pressurized Slot Testing to Determine Thermo-Mechanical Properties of Lithophysal Tuff at Yucca Mountain Nevada.

The study described in this report involves heated and unheated pressurized slot testing to determine thermo-mechanical properties of the Tptpll (Tertiary, Paintbrush, Topopah Spring Tuff Formation, crystal poor, lower lithophysal) and Tptpul (upper lithophysal) lithostratigraphic units at Yucca Mountain, Nevada. A large volume fraction of the proposed repository at Yucca Mountain may reside in the Tptpll lithostratigraphic unit. This unit is characterized by voids, or lithophysae, which range in size from centimeters to meters, making a field program an effective method of measuring bulk thermal-mechanical rock properties (thermal expansion, rock mass modulus, compressive strength, time-dependent deformation) over a range of temperature and rock conditions. The field tests outlined in this report provide data for the determination of thermo-mechanical properties of this unit. Rock-mass response data collected during this field test will reduce the uncertainty in key thermal-mechanical modeling parameters (rock-mass modulus, strength and thermal expansion) for the Tptpll lithostratigraphic unit, and provide a basis for understanding thermal-mechanical behavior of this unit. The measurements will be used to evaluate numerical models of the thermal-mechanical response of the repository. These numerical models are then used to predict pre- and post-closure repository response. ACKNOWLEDGEMENTS The authors would like to thank David Bronowski, Ronnie Taylor, Ray E. Finley, Cliff Howard, Michael Schuhen (all SNL) and Fred Homuth (LANL) for their work in the planning and implementation of the tests described in this report. This is a reprint of SAND2004-2703, which was originally printed in July 2004. At that time, it was printed for a restricted audience. It has now been approved for unlimited release.

36 MATERIALS SCIENCE↗

Alkali-Activated Cement Composites for High Temperature Goethermal Wells

Under the Department of Energy, Energy Efficiency and Renewable Energy (DOE EERE) Geothermal Technologies Program (GTP), the scope of work at Brookhaven National Laboratory (BNL) was aimed at developing and characterizing multifunctional high-temperature geothermal well cement composites. These materials are suitable for both conventional hydrothermal reservoirs at temperature of 300°C and enhanced geothermal system (EGS) environments at heating temperatures up to 600°C. The multifunctional cements were being developed with the following five advanced properties: 1) thermal shock (TS) resistance under 5 cycle heatingcooling water quenching tests, where one cycle involved heating at 500 or 600°C for 24 h and then quenching in 25°C water; 2) improved compressive toughness; 3) enhanced protection of carbon steel (CS) against brine-induced corrosion; 4) superior durability of the bond between the CS and cement surfaces; and 5) good resistance to pH 0.5 H 2 SO 4 solution at 90°C, compared to two conventional geothermal well cements (Class G modified with SiO 2 and calcium aluminum phosphate (CaP)). The latter cement was originally formulated and developed at BNL as a CO 2 - resistant cement under the previous GTP project. Unlike Class G, CaP is classified as a chemically bonded cement; namely, chemical reactions are responsible for strengthening the cement at an earlier curing stage.

15 GEOTHERMAL ENERGY↗

Surveillance of Site A and Plot M Report (2019)

The environmental surveillance program discussed in this report is an ongoing activity that resulted from the 1976-1978 radiological characterization of the former site of Argonne National Laboratory and its predecessor, the University of Chicago's Metallurgical Laboratory. This site was part of the World War II Manhattan Engineer District Project and was located in a forested area southwest of Chicago, IL, owned by the Forest Preserve District of Cook County, now known as the Palos Area Preserves. Research was conducted at two locations in the Palos Area Preserves: Site A, a 19-acre area that contained experimental laboratories and nuclear reactor facilities; and Plot M, a 150 ft x 140 ft area used for the burial of radioactive waste. The location of the Palos Area Preserves is shown in Figure 2.1. The locations of Site A and Plot M are shown in Figure 2.2. Previous comprehensive reports on this subject provide additional detail and illustrations on sampling locations and provide descriptive material along with the results through 1981. Annual reports are available for 1982 through 2018. While earlier data will not be repeated in this report, reference is made to some of the results.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Uncertainty Analysis of Consequence Management (CM) Data Products: Extended Analyses.

The goal of this project, started in FY17, is to develop and execute methods of characterizing uncertainty in data products that are developed and distributed by the DOE Consequence Management (CM) Program. This report presents the results of uncertainty analyses performed in FY18 for additional scenarios of increased complexity, including different time phases and radionuclide source terms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

CarbonSAFE Phase II: Optimizing Alabama’s CO 2 Storage in Shelby County, Alabama (Project OASIS), Milestone M3 - Site Specific Drilling Report

The Phase II Storage Complex Feasibility project, entitled "Optimizing Alabama's CO 2 Storage in Shelby County, Alabama (Project OASIS)," is a part of the DOE/NETL's CarbonSAFE initiative. The Project is managed by the Southern States Energy Board (SSEB), and includes participation from Advanced Resources International, Inc. (ARI), Crescent Resource Innovation, Southern Company, Alabama A&M University, Auburn University, and Oklahoma State University. Project OASIS is working to establish the foundation for a commercial-scale geologic storage complex for CO 2 captured from Plant Gaston (home of the National Carbon Capture Center) and surrounding industrial sources of CO 2 located in Shelby County, Alabama. The Project objectives are: • Demonstrate that the subsurface saline formations at the storage complex can store commercial volumes of CO 2 safely and permanently. • Develop a comprehensive Community Benefits Plan. • Develop the infrastructure framework for a CO 2 storage hub. • Develop a rigorous risk registry and to conduct a comprehensive risk assessment. • Develop a monitoring plan. • Develop a comprehensive site characterization plan to support an Underground Injection Control Class VI Permit in a future Phase III program. • Evaluate the commercial viability of the project. Project OASIS is about 30 miles southeast of Birmingham, Alabama within a geologic province called the Valley and Ridge (Figure 1.1). The Valley and Ridge Province comprises a sequence of Paleozoic carbonate and clastic rocks that underwent structural deformation during the Alleghanian Orogeny. Storage prospects occur in relatively flat lying structural panels located between thrust faults. Available geologic studies related to hydrocarbon exploration suggest that Cambro-Ordovician carbonates and Cambrian clastic units offer multiple potential storage intervals, and that regional confining systems are present, such as the tectonically thickened Floyd-Parkwood Shale. The surface property is owned by a timber and land stewardship company, The Westervelt Company, Inc., who worked with the Project Team to select and prepare adequate sites for geologic assessment. The purpose of drilling the Westover Stratigraphic Test Well #2 was to collect geologic data to model the feasibility of commercial scale CO 2 injection and storage. This includes geological and geophysical evaluations, reservoir engineering analyses, and risk assessments.

20 FOSSIL-FUELED POWER PLANTS↗

Walker Branch Watershed: Effect of Dual Nitrogen and Phosphorus Additions on Nutrient Uptake and Saturation Kinetics, 2011-2012

This data set reports the results of field experiments investigating the effect of dual nutrient (nitrogen and phosphorus) additions on nutrient uptake and saturation kinetics in the West Fork of Walker Branch Watershed, a forested headwater stream on the Oak Ridge Reservation in east Tennessee. The experiments were carried out in the autumn of 2011 and spring of 2012 to examine seasonality in nutrient dynamics. The nutrient limitation status (N-limited, P-limited, co-limited for N and P, or neither N- nor P-limited) of Walker Branch was examined using nutrient diffusing substrata (NDS) in both autumn and spring. Next, a combination of instantaneous and steady-state nutrient releases were used to examine the effect of dual N and P releases on nutrient dynamics and saturation kinetics. Lastly, because the nutrient release results from autumn suggested a strong role of P sorption in P dynamics, laboratory assays were carried out in spring to quantify the importance of P sorption to sediments in Walker Branch. This dataset contains 5 data files in comma-separate (*.csv) format.

54 ENVIRONMENTAL SCIENCES↗

Preparation and Characterization of Materials for Low- to Intermediate-Temperature CO2 Adsorption

Global carbon dioxide emissions are rising and the use of fossil fuels in several sectors are the leading causes. As global population and economies continue to grow significantly, the most practical method of lowering such emissions is to capture CO2. Although other technologies are more developed, adsorption is very promising and has attracted much attention. To ensure this technology’s success, it is essential to have suitable CO2 adsorbent materials. In this work, several new hydrotalcites (HTs) with different initial concentrations of ion precursors were prepared for the first time by the co-precipitation method—it was possible to verify that the ion concentrations influence the characteristics of the materials. The prepared HTs were characterized by thermogravimetric analysis (TG), X-Ray diffraction (XRD), surface area measurements and temperature-programmed desorption of CO2 (TPD-CO2) to relate their CO2 capture capacity to their physicochemical properties; the CO2 adsorption equilibrium isotherms were determined at 35 and 300 °C for the prepared samples, as well as for some commercial materials: magnesium oxide, calcium oxide, aluminium oxide and Zeolite 13X. After determining which materials present the best CO2 adsorption capacity, these were submitted to adsorption-desorption cycles to study their stability. The main objective of the work was to prepare and study different CO2 adsorbents for processes that are carried out at low and intermediate temperatures. From the experimental results, it was possible to conclude that the Zeolite 13X showed the best capacity at 35 °C, 3.38 mmol·g−1 (@ pCO2 = 1 bar), and a prepared calcined HT (c-HT2) was the best at 300 °C, 0.97 mmol·g−1 (@ pCO2 = 1 bar). Moreover, it seems there is an optimum initial concentration of the ions’ solutions for the tested HTs, which depends on the final application—c-HT1 showed a better capacity at 35 °C and c-HT2 at 300 °C. From the adsorption-desorption cycles—performed at 35 and 300 °C with the best materials using a magnetic suspension microbalance at 1 bar of CO2 partial pressure —, a working cyclic capacity of 2.69 mmol∙g−1 was achieved by the Zeolite at 35 °C; in turn, c-HT2 showed a working cyclic capacity of 0.79 mmol∙g−1 at 300 °C.

Figueiredo, Anabela↗

NCT HE roadmap meeting/LANL capabilities and perspectives

The presentation is a summary of LANL capabilities and perspectives on high explosives. it describes our high explosives research capabilities (firing sites and diagnostics), a list of the extent to which high explosive materials have been characterized at LANL, as well as LANL's perspectives on potential research direction for the NCT program.

99 GENERAL AND MISCELLANEOUS↗

Properties of Alloy 617 for Heat Exchanger Design

Abstract – Alloy 617 is among the primary candidates for very high temperature reactor heat exchangers anticipated for use up to 950ºC. Elevated temperature properties of this alloy and the mechanisms responsible for the observed tensile, creep and creep-fatigue behavior have been characterized over a wide range of test temperatures up to 1000ºC. Properties from the current experimental program have been combined with archival information from previous VHTR research to provide large data sets for many heats of material, product forms, and weldments. The combined data have been analyzed to determine conservative values of yield and tensile strength, strain rate sensitivity, creep-rupture behavior, fatigue and creep- fatigue properties that can be used for engineering design of reactor components. Phenomenological models have been developed to bound the regions over which the engineering properties are well known or can be confidently extrapolated for use in design.

Alloy 617↗

On the utility of non thermal plasmas

Nonthermal plasmas have properties which can differ substantially even from thermal plasmas of the same density and energy. In practical applications, many of these differences have utility that can be exploited, often with waves. The goal of this thesis is to explore three such applications of nonthermal plasma for the purposes of wave amplification and, ultimately, controlled nuclear fusion. First, we discuss the outstanding potential for a shaped plasma technology that relies on ionizing a beam of aerosol particles. This ionization results in a Coulomb explosion, yielding a highly nonthermal distribution for the plasma in the target volume. Homogeneous, high aspect ratio plasma couplers such as these could be used in a Raman amplification scheme to attain the next generation of laser intensities. Such a powerful laser could be used to study radiation reaction and vacuum pair production, among many other applications. We describe the conditions under which sufficiently dense aerosol beams can be prepared and provide some experimental validation of these claims. Second, we survey the prospects for controlled p-11B fusion in both magnetic and inertial confinement schemes. Whereas most studies have focused on mitigating the bremsstrahlung loss channel, we focus on nonthermal manipulations of the bulk plasma which could improve the reactivity. In particular, we present upper bounds on the p-11B reactivity using alpha channeling to efficiently heat the proton distribution in both schemes. Finally, we place a sharp limit on the energy that can be extracted from a non-thermal particle distribution using waves. In the quasilinear regime of wave-particle interaction, waves rearrange the densities of states in phase space in a diffusive fashion. A salient consequence is that only certain, generally nonthermal, plasma states can be reached. We characterize this restricted state space and thereby reduce the problem of maximizing energy extraction to linear programming. Varying the connectedness of the phase space so that e.g. particles may only be diffused to parts of phase space close in energy, we describe the implications for the state space and the solution of the optimization problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗