Search NASA⌕ Search

SEARCH · Search NASA

Results for “Project Profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Laser-zone growth in a Ribbon-To-Ribbon (RTR) process. Silicon sheet growth development for the large area sheet task of the low-cost solar array project

A new calculation of the effects of thermal stresses during growth on silicon ribbon quality is reported. Thermal stress distributions are computed for ribbon growth under a variety of temperature profiles. A growth rate of 55 cu cm/min with a single ribbon was achieved. The growth of RTR ribbon with a fairly uniform parallel dendritic structure was demonstrated. Results with two approaches were obtained for reducing the Mo impurity level in polycrystalline feedstock. Coating the Mo substrate with Si3N4 does not effect thermal shear separation of the polyribbon; this process shows promise of improving cell efficiency and also increasing the useful life of the molybdenum substrate. A number of solar cells were fabricated on RTR silicon grown from CVD feedstock.

Baghdadi, A.↗

Lidar measurements of boundary layers, aerosol scattering and clouds during project FIFE

A detailed account of progress achieved under this grant funding is contained in five journal papers. The titles of these papers are: The calculation of area-averaged vertical profiles of the horizontal wind velocity using volume imaging lidar data; Volume imaging lidar observation of the convective structure surrounding the flight path of an instrumented aircraft; Convective boundary layer mean depths, cloud base altitudes, cloud top altitudes, cloud coverages, and cloud shadows obtained from Volume Imaging Lidar data; An accuracy analysis of the wind profiles calculated from Volume Imaging Lidar data; and Calculation of divergence and vertical motion from volume-imaging lidar data. Copies of these papers form the body of this report.

Eloranta, Edwin W.↗

Autonomous, In-Flight Crew Health Risk Management for Exploration-Class Missions: Leveraging the Integrated Medical Model for the Exploration Medical System Demonstration Project

The Integrated Medical Model (IMM) captures organizational knowledge across the space medicine, training, operations, engineering, and research domains. IMM uses this knowledge in the context of a mission and crew profile to forecast risks to crew health and mission success. The IMM establishes a quantified, statistical relationship among medical conditions, risk factors, available medical resources, and crew health and mission outcomes. These relationships may provide an appropriate foundation for developing an in-flight medical decision support tool that helps optimize the use of medical resources and assists in overall crew health management by an autonomous crew with extremely limited interactions with ground support personnel and no chance of resupply.

Butler, D. J.↗

Mapping Modeled Aerosol Species to Measured Lidar Ratios for the MIRA Project

Overarching goal: Create Climatological Lidar Ratio Maps for CALIPSO - Since CALIPSO is an elastic backscatter lidar, it is necessary to select a priori aerosol lidar ratios prior to computing extinction profiles. - Presently, the CALIPSO lidar ratio selection process uses a single lidar ratio for each of the 7 CALIPSO aerosol types in the troposphere. - Consequently, regional and seasonal variability of the lidar ratio is very limited in the present CALIPSO algorithm. - Here, we describe an approach for creating new climatological lidar ratio maps for each of the CALIPSO aerosol types using MODIS-CALIPSO constrained retrievals and global model simulations. - The purpose is to eventually replace the seven single-valued lidar ratios for the CALIPSO types with latitude- and longitude-dependent maps for each of the seven types.

G. L. Schuster↗

UEDGE simulation of edge plasmas in DIII-D double null configurations

Analysis of plasma flow in the edge of double null hybrid mode DIII-D plasmas is reported. The two dimension fluid plasma code UEDGE [T. Rognlien et al., J. Nucl. Mater. 196-198, 347 (1992)] is used for the analysis. The effect of impurity radiation from intrinsic carbon sputtered from plasma facing surfaces is included as is the effect of plasma drifts. Two discharges in which the flux surfaces through the poloidal field nulls (X-points) are separated by 1 cm at the outer midplane are analyzed. The discharges differ only in the direction of the ion {nabla}B drift. It is shown that the flow of both primary ions and intrinsic impurities is dominated by the effect of plasma drifts. Variations in the recycling of deuterium ions, as seen in D{sub {alpha}} emission profiles, are qualitatively consistent with experiment and are driven by the effect of ExB drifts associated with radial gradients of the electron temperature at the secondary separatrix. Trace argon impurity is introduced to simulate the transport of argon used in the experiment to enhance divertor radiation power. Penetration of the trace argon to the closed field lines depends on the direction of the ion {nabla}B drift, consistent with experiment. The analysis described here includes the effect of a deuterium gas puff to establish the ''puff and pump'' configuration. The poloidal flow of impurities is a balance between the projection of the parallel flow and poloidal drifts, primarily from ExB. It is shown that the effect of the gas puff is primarily to alter the electron temperature profile and thus affects impurity flow via alteration of ExB drifts, not via entrainment in deuterium ion parallel flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High Radiation Environment Nuclear Fragment Separator Magnet

Superconducting coils wound with HTS conductor can be used in magnets located in a high radiation environment. NbTi and Nb 3 Sn superconductors must operate at 4.5 K or below where removal of heat is less efficient. The HTS conductor can carry significant current at higher temperatures where the Carnot efficiency is significantly more favorable and where the coolant heat capacity is much larger. Using the HTS conductor the magnet can be operated at 40 K. This project examines the use of HTS conductor for the Michigan State University Facility For Rare Isotope Beams (FRIB) fragment separator dipole magnet which bends the beam by 30° and is located in a high radiation region that will not be easily accessible. Two of these magnets are needed to select the chosen isotope. There are a number of technical challenges to be addressed in the design of this magnet. The separator dipole is 2 m long and subtends a large angle. The magnet should keep a constant transverse field profile along its beam reference path. Winding coils with a curved inner segment is difficult as the conductor will tend to unwind during the process. In the Phase I project two approaches to winding the conductor were examined. The first was to wind the coils with curved sections on the inner and outer segments with the inner segment wound with negative curvature. The alternate approach was to use a straight segment on the inner segment to avoid negative curvature. In Phase I coils with a limited number of turns were successfully wound and tested at 77 K for both coil configurations. The Phase II program concentrated on the design, coil winding procedures, structural analysis, prototyping and testing of an HTS curved dipole coil at 40 K with a heat load representative of the radiation environment. One of the key criteria of the design of this magnet is to avoid the use of organic materials that would degrade rapidly in radiation. The Lorentz forces expected from the coils interacting with the magnetic field are large and in order minimize the deformation of the coils, mechanical support must be provided. Since the support structure cannot be made of organic materials with minimal thermal conductivity, an optimization was explored comparing the amount of coil deformation that can be tolerated and the amount of heat leakage that can be endured. A test coil containing 500 m of HTS was constructed to be tested at the 40 K operating temperature. The anticipated heat load was simulated with heater strips to demonstrate that the heat could be removed and that the coil can operate in a stable state. The FRIB project has decided that using HTS coils for this magnet was too risky considering their time and funding constraints and has opted for a more conservative approach with conventional coils. As an outcome of this STTR project, it is likely that HTS coils operating at higher temperatures will have beneficial applications for future accelerator projects.

40 K↗

Lattice-Mismatched III-V Epilayers for High-Efficiency Photovoltaics

The project focused on development of new approaches and materials combinations to expand and improve the quality and versatility of lattice-mismatched (LMM) III-V semiconductor epilayers for use in high-efficiency multijunction photovoltaic (PV) devices. To address these goals, new capabilities for materials synthesis and characterization were established at SDSM&T that have applications in modern opto- and nano-electronics, including epitaxial crystal growth and transmission electron microscopy. Advances were made in analyzing and controlling the strain profiles and quality of compositional grades used for these technologies. In particular, quaternary compositional grades were demonstrated, and a quantitative method for characteristic X-ray analysis was developed. The project allowed enhanced collaboration between scientists at NREL and SDSM&T to address closely related research goals, including materials exchange and characterization.

14 SOLAR ENERGY↗

Hyperlight Energy 7342 10-26-19 (Final Report)

One of the principal issues preventing the widescale deployment of Concentrating Solar Power (CSP) technologies for power and process heat generation is the high cost per unit energy produced. While the operating expenses of a solar plant are often far less than those of a comparable natural gas plant due to zero fuel costs, the increased capital costs of the system, and the collector field in particular, are a significant barrier to project feasibility. Hyperlight Energy has been funded under the DOE COLLECTS program to further develop its novel Linear Fresnel Reflector (LFR) design to meet the DOE’s programmatic goal of creating a solar collector that has an installed cost of less than $\$$99/m2 with a pathway towards a future price of $\$$50/m2. Hyperlight Energy has a unique, inexpensive design featuring four-inch-wide mirror slats mounted on 48 ft long extruded plastic D-profile tubes. By removing the steel and concrete of a traditional collectors Hyperlight is able to drastically decrease the materials and fabrication costs of the primary reflectors. The goal of this project was to prove the manufacturability of these reflectors, install a half-acre system of the collector, and test the performance of the field to determine the actual cost of the energy produced by the solar field. During the course of the project the half-acre system was successfully manufactured and deployed at the company’s demonstration site in Brawley, CA. The total collector cost came in under the desired $\$$99/m2 goal and proved the feasibility of this new type of solar field. With further planned cost reductions the DOE’s ultimate goal of $\$$50/m2 appears to be achievable. The data generated from this project has already been sufficient to secure Hyperlight Energy’s first commercial project, and continued operations will help to validate the product’s lifespan and performance over time. This will provide invaluable support for future installations. Hyperlight Energy has won a contract for a three-acre commercial project, but the company plans to aggressively pursue multiple similar and larger-scale projects in the near future. At present, these projects will serve to replace natural gas fired boilers in industrial processes, reducing the emissions of the associated plants. In the future, potential project sites will expand to include enhanced oil recovery (EOR) and other uses in the transportation fuel pathway, leading to fuels with a lower carbon intensity (CI). This path will allow renewable energy to begin to make an impact on the industrial process heat sector, which is one the primary consumers of natural gas and other fossil fuels in the country, and which is beyond the scope of other existing renewable technologies that exclusively generate electricity. Only by replacing the fossil fuels burned in industrial processes will the DOE’s emissions goals be achieved.

14 SOLAR ENERGY↗

Establishing advanced practice for medical imaging in New Zealand

Introduction: This article presents the outcome and recommendations following the second stage of a role development project conducted on behalf of the New Zealand Institute of Medical Radiation Technology (NZIMRT). The study sought to support the development of profiles and criteria that may be used to formulate Advanced Scopes of Practice for the profession. It commenced in 2011, following on from initial research that occurred between 2005 and 2008 investigating role development and a possible career structure for medical radiation technologists (MRTs) in New Zealand (NZ). Methods: The study sought to support the development of profiles and criteria that could be used to develop Advanced Scopes of Practice for the profession through inviting 12 specialist medical imaging groups in NZ to participate in a survey. Results: Findings showed strong agreement on potential profiles and on generic criteria within them; however, there was less agreement on specific skills criteria within specialist areas. Conclusions: The authors recommend that one Advanced Scope of Practice be developed for Medical Imaging, with the establishment of generic and specialist criteria. Systems for approval of the overall criteria package for any individual Advanced Practitioner (AP) profile, audit and continuing professional development requirements need to be established by the Medical Radiation Technologists Board (MRTB) to meet the local needs of clinical departments. It is further recommended that the NZIMRT and MRTB promote and support the need for an AP pathway for medical imaging in NZ.

61 RADIATION PROTECTION AND DOSIMETRY↗

Radiation hardness of the low gain avalanche diodes developed by NDL and IHEP in China

This paper presents a study on the radiation hardness of low gain avalanche detector (LGAD) developed by the Novel Device Laboratory (NDL) in Beijing and the Institute of High Energy Physics (IHEP) of Chinese Academy of Sciences, in the context of an upgrade project of the ATLAS detector for the high luminosity phase of LHC. NDL LGAD sensors with different layouts, epitaxial resistivity and doping profile were irradiated up to 1.02 × 10 15 n eq /cm 2 by 70 MeV protons at Cyclotron and Radioisotope Center (CYRIC). The timing resolution of NDL LGAD sensors reached 50 ps and the collected charge reached 3 - 4 fC after irradiation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Close companions to two high-redshift quasars

We report the serendipitous discoveries of companion galaxies to two high-redshift quasars. SDSS J025617.7+001904 is a z = 4.79 quasar included in our recent survey of faint quasars in the SDSS Stripe 82 region. The initial MMT slit spectroscopy shows excess Lyα emission extending well beyond the quasar's light profile. Further imaging and spectroscopy with LBT/MODS1 confirms the presence of a bright galaxy (i {sub AB} = 23.6) located 2'' (12 kpc projected) from the quasar with strong Lyα emission (EW{sub 0} ≈ 100 Å) at the redshift of the quasar, as well as faint continuum. The second quasar, CFHQS J005006.6+344522 (z = 6.25), is included in our recent HST SNAP survey of z ∼ 6 quasars searching for evidence of gravitational lensing. Deep imaging with ACS and WFC3 confirms an optical dropout ∼4.5 mag fainter than the quasar (Y {sub AB} = 25) at a separation of 0.''9. The red i {sub 775} – Y {sub 105} color of the galaxy and its proximity to the quasar (5 kpc projected if at the quasar redshift) strongly favor an association with the quasar. Although it is much fainter than the quasar, it is remarkably bright when compared to field galaxies at this redshift, while showing no evidence for lensing. Both systems may represent late-stage mergers of two massive galaxies, with the observed light for one dominated by powerful ongoing star formation and for the other by rapid black hole growth. Observations of close companions are rare; if major mergers are primarily responsible for high-redshift quasar fueling then the phase when progenitor galaxies can be observed as bright companions is relatively short.

79 ASTRONOMY AND ASTROPHYSICS↗

Role of transport versus fueling upon pedestal density

The edge pedestal is a vital component in achieving overall high confinement in a magnetic fusion device. Therefore, obtaining a physics understanding and predictive capability for the pedestal height and structure is a major goal of domestic and international fusion research. Great progress has been made in understanding the pressure limits imposed by MHD stability on pedestals in tokamaks. It is now clear, though, that the goal of predictive capability for the pedestal structure requires advances in the physics understanding of the separate structure of density and temperature profiles in the pedestal region. A key challenge is to understand the importance of particle sources in determining the density pedestal and project to burning plasma scenarios. Experiments on DIIID and archived data from C-Mod, DIII-D, and NSTX will be used to test how fueling, reduced recycling, and transport affect the density pedestal structure. The role of divertor geometry strongly affects ionization properties and thus its effect upon the pedestal structure will be investigated. US researchers involved in collaborative activities on international experiments and at university facilities may gather, analyze and contribute data to this research effort.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the Atmospheric Boundary Layer Structure during AWAKEN (Final Report)

The American Wake Experiment (AWAKEN, https://openei.org/wiki/AWAKEN) is a collaborative, international field campaign funded by the Department of Energy (DOE) to study the dynamic and turbulent properties of wind farm wakes. The scope of the project ranges from studying individual turbine wakes, wake interactions within wind farms, to downstream wake effects of wind farms on the atmospheric boundary layer (ABL) and mesoscale environment. The latter effects influence the performance of wind farms deployed downwind and modify the weather and climate in the region. The focus of our project is on studying the mesoscale and boundary-layer effects of wind farms in more detail using advanced boundary-layer profiling facilities.

17 WIND ENERGY↗

Final CRADA Report – NFE-21-08693

TAE Technologies is developing a magnetic fusion energy concept known as the beam-driven field-reversed configuration (FRC) with the ultimate goal of developing a reactor for commercial electricity production capable of burning aneutronic pB11 fuel. To achieve the high plasma temperatures this requires, auxiliary radiofrequency (RF) heating will likely be needed. High Harmonic Fast Wave (HHFW) heating has been identified as a candidate RF heating scheme to overcome the unique challenges posed to RF heating by the FRC, including the large distance from the plasma edge to the last closed flux surface and a magnetic field profile with strength decreasing from edge to core and reversing sign at a null point inside the plasma. The purpose of this project was to develop the experimental capabilities to test HHFW on TAE’s C-2W device through the design of a phased array antenna and accompanying matching network. The design was performed by ORNL and informed by experiments with a prototype four-strap phased antenna-array that was manufactured and installed on the LArge Plasma Device (LAPD) at UCLA and simulations conducted with the Petra-M code under the purview of a previous INFUSE grant. The ORNL team completed the conceptual design of the antenna and matching network which was then handed off to the TAE Mechanical Design team. The design was then iterated on to ensure changes to the mechanical design did not interfere with the RF performance. This process is now complete, and, with mechanical design in hand, TAE is proceeding with plans for final integration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling Distributed Generation in California

In support of analysis for the biennial Integrated Energy Policy Report, the California Energy Commission and the National Renewable Energy Laboratory have partnered to study the growth of distributed energy resources in California. This study involves the use of National Renewable Energy Laboratory's Distributed Generation Market Demand model, available at https://www.nrel.gov/analysis/dgen/, to project statewide adoption of distributed photovoltaics and paired storage. Key outcomes of the collaboration include: • Improved representation of California building stock, load profiles, historical adoption, and tariffs, including the net billing tariff, in the dGen model; • Trained CEC staff members to use and adapt the dGen model for their specific needs; • Developed a methodology for representing emerging consumer segments to potentially adopt distributed energy resources, including low-income, multifamily, and renter-occupied buildings; • Forecasted solar photovoltaic and paired storage growth in California using a common set of modeling parameters. This report describes the multiyear effort, which includes a discussion of: • Methodology and data employed in adapting the Distributed Generation Market Demand model for California to forecast solar photovoltaic and storage statewide through 2040; • Steps taken to modify the base model to forecast solar photovoltaic adoption in emerging market segments such as multifamily or renter-occupied homes or both; • Future enhancements of the model.

14 SOLAR ENERGY↗

Stellar Occultation by Comet 67P/Churyumov–Gerasimenko Observed with Rosetta's Alice Far-ultraviolet Spectrograph

Following our previous detection of ubiquitous H{sub 2}O and O{sub 2} absorption against the far-ultraviolet continuum of stars located near the nucleus of Comet 67P/Churyumov–Gerasimenko, we present a serendipitously observed stellar occultation that occurred on 2015 September 13, approximately one month after the comet’s perihelion passage. The occultation appears in two consecutive 10-minute spectral images obtained by Alice, Rosetta’s ultraviolet (700–2100 Å) spectrograph, both of which show H{sub 2}O absorption with column density >10{sup 17.5} cm{sup −2} and significant O{sub 2} absorption (O{sub 2}/H{sub 2}O ≈ 5%–10%). Because the projected distance from the star to the nucleus changes between exposures, our ability to study the H{sub 2}O column density profile near the nucleus (impact parameters <1 km) is unmatched by our previous observations. We find that the H{sub 2}O and O{sub 2} column densities decrease with increasing impact parameter, in accordance with expectations, but the O{sub 2} column decreases ∼3 times more quickly than H{sub 2}O. When combined with previously published results from stellar appulses, we conclude that the O{sub 2} and H{sub 2}O column densities are highly correlated, and O{sub 2}/H{sub 2}O decreases with the increasing H{sub 2}O column.

79 ASTRONOMY AND ASTROPHYSICS↗

Requirement for simulation in V/STOL research aircraft programs

The application of flight simulation to aircraft design and development is discussed. The general stages of aircraft development are defined. The application of flight simulation to the following projects is reported: (1) the development and flight research of the Augmented Jet-Flap STOL research aircraft and (2) design studies of advanced VTOL research aircraft. It is stated that the simulation projects proved significant in helping establish criteria for the aircraft design and in facilitating the study of problems associated with new flight profiles, new methods of control, and special emergency conditions.

Quigley, H. C.↗

Spectral and spatial properties of solar microflares

Solar microflares are studied using both hard ( 28 keV) and soft (3.5 to 8.0 keV) X-ray observations. The soft X-ray events have durations 3 m at 0.1x maximum intensity, and typically have similar rise and decay times. The fastest decay observed was 15 s (1/e). Soft and hard X-ray intensities are uncorrelated. The events are very compact, consistent with a projected area approximately 8 x 8 inches. They are normally not associated with H alpha or type 3 emissions and their time profiles suggest a thermal origin at the top of the chromosphere. If the primary energy release site is in the corona, an energy transfer agent consistent with the observations is a non-thermal proton beam.

Simnett, G. M.↗