Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Next Generation Nuclear Plant Methods Technical Program Plan -- PLN-2498

One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope of the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design and Performance Evaluation of Al{sub 2}O{sub 3}-SiC Composite for Direct-Bonded Copper Substrate

A computational material design approach is applied to propose a novel ceramic material for direct-bonded copper (DBC) substrate with enhanced thermal and structural performance. The material design inherently consists of many competing requirements that require careful decisions regarding key trade-offs in terms of material composition, inclusion size, shape, and distribution to achieve the target properties. The alumina-silicon (Al{sub 2}O{sub 3}-SiC) composite, as compared to commercial alumina, used in DBC is found to be the most suitable design among other candidates with improved thermal and structural properties. In order to study the performance characteristics and the effects of the new ceramic composite with improved properties in terms of structural behavior and fatigue life of the DBC substrate, the normal working and extreme thermal cycling conditions were simulated and analyzed using finite element method. The temperature, strain, and localized stress distribution within the substrate at a steady-state condition were analyzed, and the improved Coffin–Manson law was used to calculate the fatigue life of the substrate under extreme thermal cycling conditions. The proposed Al{sub 2}O{sub 3}-SiC composite is found to be more robust than the commercial alumina as DBC substrates considering the thermal–mechanical performance. The fatigue life cycle of the DBC substrate with the proposed material is predicted to be about two times longer than the commercial alumina DBC ceramic under transient thermal cycling test.

36 MATERIALS SCIENCE↗

Spectral-partitioned Kohn-Sham density functional theory

Here we introduce a general, variational scheme for systematic approximation of a given Kohn-Sham free-energy functional by partitioning the density matrix into distinct spectral domains, each of which may be spanned by an independent diagonal representation without requirement of mutual orthogonality. It is shown that by generalizing the entropic contribution to the free energy to allow for independent representations in each spectral domain, the free energy becomes an upper bound to the exact (unpartitioned) Kohn-Sham free energy, attaining this limit as the representations approach Kohn-Sham eigenfunctions. A numerical procedure is devised for calculation of the generalized entropy associated with spectral partitioning of the density matrix. The result is a powerful framework for Kohn-Sham calculations of systems whose occupied subspaces span multiple energy regimes. As a case in point, we apply the proposed framework to warm- and hot-dense matter described by finite-temperature density functional theory, where at high energies the density matrix is represented by that of the free-electron gas, while at low energies it is variationally optimized. We derive expressions for the spectral-partitioned Kohn-Sham Hamiltonian, atomic forces, and macroscopic stresses within the projector-augmented wave (PAW) and the norm-conserving pseudopotential methods. It is demonstrated that at high temperatures, spectral partitioning facilitates accurate calculations at dramatically reduced computational cost. Moreover, as temperature is increased, fewer exact Kohn-Sham states are required for a given accuracy, leading to further reductions in computational cost. Finally, it is shown that standard multiprojector expansions of electronic orbitals within atomic spheres in the PAW method lack sufficient completeness at high temperatures. Spectral partitioning provides a systematic solution for this fundamental problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of poloidal velocity in the tokamak plasma with allowance for density inhomogeneity and diamagnetic drift of ions

A one-dimensional evolution equation for the angle-averaged poloidal momentum of the tokamak plasma is derived in the framework of reduced magnetohydrodynamics with allowance for density inhomogeneity and diamagnetic drift of ions. In addition to fluctuations of the E Multiplication-Sign B drift velocity, the resulting turbulent Reynolds stress tensor includes fluctuations of the ion density and ion pressure, as well as turbulent radial fluxes of particles and heat. It is demonstrated numerically by using a particular example that the poloidal velocity calculated using the refined one-dimensional evolution equation differs substantially from that provided by the simplified model. When passing to the new model, both the turbulent Reynolds force and the Stringer-Winsor force increase, which leads to an increase in the amplitude of the ion poloidal velocity. This, in turn, leads to a decrease in turbulent fluxes of particles and heat due to the effect of shear decorrelation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of intrinsic axial flows in unsheared, uniform magnetic fields

A simple model for the generation and amplification of intrinsic axial flow in a linear device, controlled shear decorrelation experiment, is proposed. This model proposes and builds upon a novel dynamical symmetry breaking mechanism, using a simple theory of drift wave turbulence in the presence of axial flow shear. This mechanism does not require complex magnetic field structure, such as shear, and thus is also applicable to intrinsic rotation generation in tokamaks at weak or zero magnetic shear, as well as to linear devices. This mechanism is essentially the self-amplification of the mean axial flow profile, i.e., a modulational instability. Hence, the flow development is a form of negative viscosity phenomenon. Unlike conventional mechanisms where the residual stress produces an intrinsic torque, in this dynamical symmetry breaking scheme, the residual stress induces a negative increment to the ambient turbulent viscosity. The axial flow shear is then amplified by this negative viscosity increment. The resulting mean axial flow profile is calculated and discussed by analogy with the problem of turbulent pipe flow. For tokamaks, the negative viscosity is not needed to generate intrinsic rotation. However, toroidal rotation profile gradient is enhanced by the negative increment in turbulent viscosity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A quantitative quantum-chemical analysis tool for the distribution of mechanical force in molecules

The promising field of mechanochemistry suffers from a general lack of understanding of the distribution and propagation of force in a stretched molecule, which limits its applicability up to the present day. In this article, we introduce the JEDI (Judgement of Energy DIstribution) analysis, which is the first quantum chemical method that provides a quantitative understanding of the distribution of mechanical stress energy among all degrees of freedom in a molecule. The method is carried out on the basis of static or dynamic calculations under the influence of an external force and makes use of a Hessian matrix in redundant internal coordinates (bond lengths, bond angles, and dihedral angles), so that all relevant degrees of freedom of a molecule are included and mechanochemical processes can be interpreted in a chemically intuitive way. The JEDI method is characterized by its modest computational effort, with the calculation of the Hessian being the rate-determining step, and delivers, except for the harmonic approximation, exact ab initio results. We apply the JEDI analysis to several example molecules in both static quantum chemical calculations and Born-Oppenheimer Molecular Dynamics simulations in which molecules are subject to an external force, thus studying not only the distribution and the propagation of strain in mechanically deformed systems, but also gaining valuable insights into the mechanochemically induced isomerization of trans-3,4-dimethylcyclobutene to trans,trans-2,4-hexadiene. The JEDI analysis can potentially be used in the discussion of sonochemical reactions, molecular motors, mechanophores, and photoswitches as well as in the development of molecular force probes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intraband Radiation Absorption by Free Holes in GaAs/InGaAs Quantum Wells with Allowance for Nonsphericity of the kP Hamiltonian

A system of Kane’s equations has been derived and solved with allowance for elastic stresses and nonsphericity of the kP Hamiltonian. On this basis, analytic expressions for the energy spectra of charge carriers have been obtained and calculations of the optical absorption coefficient for heavy holes with transition to a spin-orbit-split hole band in GaAs/InGaAs quantum wells (QWs) have been performed for various polarization directions of the incident radiation. It is established that the maximum absorption in GaAs/InGaAs heterostructure takes place at a QW width of 4–6 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain rate sensitivity, microstructure variations, and stress-assisted β → α" phase transformation investigation on the mechanical behavior of dual-phase titanium alloys

In this study, the microstructures of three widely used dual-phase titanium alloys: Ti-6Al-4V, Ti-6Al-2Sn-4Zr-2Mo, and Ti-6Al-2Sn-4Zr-6Mo are characterized using backscatter electron imaging and the deformation behaviors in their individual α and β phases are investigated using in situ high-energy X-ray diffraction during uniaxial tension experiments. This is accompanied by calculation of the strain rate sensitivity (SRS) in these alloys, as a function of applied loading. The results of the calculated SRS and the mechanical response (in terms of lattice strains and hardening behaviors) are rationalized based on the local microstructure, composition, and texture of the alloy. A stress-induced β (BCC) to α" (orthorhombic) phase transformation is observed during the in-situ diffraction experiment, which permitted analysis of the lattice strain evolution during the phase transformation. Results from this study provide insights into the relationship between microstructure, composition, applied loading, and the deformation behavior, including effects on loading with time holds. Specifically, the results show that the microstructure, and not necessarily the chemical composition (Mo content), along with the applied loading have a dominant role in the observed SRS variation in titanium alloys. Further, the evolution of the α" (orthorhombic) phase is observed for the first time during deformation of an industrially relevant titanium alloy, Ti-6246.

36 MATERIALS SCIENCE↗

Four equation k-omega based turbulence model with algebraic flux for supercritical flows

Hydrocarbon and nuclear fuels will contribute substantially to the growing global energy portfolio for some time to come. At the same time atmospheric carbon levels and economic concerns are increasingly shaping the power generation environment. Supercritical fluid technologies are being investigated to address both concerns. For example, direct fired supercritical CO 2 power cycles offer key advantages for carbon capture and thermal efficiency. Additionally, the supercritical water reactor Generation IV nuclear reactor allows higher power densities and more efficient operation than current pressurized or boiling water reactors. As these technologies are developed, a need exists for accurate, yet cost-effective modeling and simulation solutions to assist with design and safety calculations. Supercritical fluid properties are strongly dependent on temperature which results in a number of unique flow features. Among these features are the complex buoyancy and buoyancy-turbulence interaction behaviors exhibited by supercritical flows that are not found in liquid or gas flows. Therefore, standard turbulence models with current model coefficient values are not likely to be applicable to supercritical fluid flows. The subject of this paper is efficient modeling and simulation of supercritical flows to support nascent technologies growing to maturation and operational deployment. We present a framework for developing Reynolds-Averaged Navier-Stokes turbulence models specifically equipped for the challenges of supercritical flows. A novel formulation of the algebraic heat flux model of the buoyancy production of turbulence term is used with a traditional shear stress transport model. To produce a new turbulence model for supercritical channel flows, the empirical coefficients of the resulting four equation model were calculated from data previously published by other authors regarding upward supercritical flow through heated pipes. The presented SST k t - ω t approach was validated against heated tube experiments to show predictive capabilities in moderate flow conditions, where buoyancy effects are important but not dominating of inertial effects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermodynamic and kinetic anisotropies in octane thin films

Confinement breaks the translational symmetry of materials, making all thermodynamic and kinetic quantities functions of position. Such symmetry breaking can be used to obtain configurations that are not otherwise accessible in the bulk. Here, we use computer simulations to explore the effect of substrate-liquid interactions on thermodynamic and kinetic anisotropies induced by a solid substrate. We consider n-octane nano-films that are in contact with substrates with varying degrees of attraction, parameterized by an interaction parameter ϵ{sub S}. Complete freezing of octane nano-films is observed at low temperatures, irrespective of ϵ{sub S}, while at intermediate temperatures, a frozen monolayer emerges at solid-liquid and vapor-liquid interfaces. By carefully inspecting the profiles of translational and orientational relaxation times, we confirm that the translational and orientational degrees of freedom are decoupled at these frozen monolayers. At sufficiently high temperatures, however, free interfaces and solid-liquid interfaces close to loose (low-ϵ{sub S}) substrates undergo “pre-freezing,” characterized by mild peaks in several thermodynamic quantities. Two distinct dynamic regimes are observed at solid-liquid interfaces. The dynamics is accelerated in the vicinity of loose substrates, while sticky (high-ϵ{sub S}) substrates decelerate dynamics, sometimes by as much as two orders of magnitude. These two distinct dynamical regimes have been previously reported by Haji-Akbari and Debenedetti [J. Chem. Phys. 141, 024506 (2014)] for a model atomic glass-forming liquid. We also confirm the existence of two correlations—proposed in the above-mentioned work—in solid-liquid subsurface regions of octane thin films, i.e., a correlation between atomic density and normal stress, and between atomic translational relaxation time and lateral stress. Finally, we inspect the ability of different regions of an octane film to explore the potential energy landscape by performing inherent structure calculations, and observe no noticeable difference between the free surface and the bulk in efficiently exploring the potential energy landscape. This is unlike the films of model atomic glass formers that tend to sample their respective landscape more efficiently at free surfaces. We discuss the implications of this finding to the ability of octane—and other n-alkanes—to form ultrastable glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic hysteretic sensing model of bending-mode Galfenol transducer

A dynamic hysteretic sensing model has been developed to predict the dynamic responses of the magnetic induction, the stress, and the output voltage for a bending-mode Galfenol unimorph transducer subjected simultaneously to acceleration and bias magnetic field. This model is obtained by coupling the hysteretic Armstrong model and the structural dynamic model of the Galfenol unimorph beam. The structural dynamic model of the beam is founded based on the Euler-Bernouli beam theory, the nonlinear constitutive equations, and the Faraday law of electromagnetic induction. Comparisons between the calculated and measured results show the model can describe dynamic nonlinear voltage characteristics of the device, and can predict hysteretic behaviors between the magnetic induction and the stress. Moreover, the model can effectively analyze the effects of the bias magnetic field, the acceleration amplitude, and frequency on the root mean square voltage of the device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Creep-Fatigue Life Prediction of Alloy 617 at 950 deg. C using an Effective Hold Time Approach - 18511

Time Fraction Rule for calculating creep damage fraction is suitable for predicting creep-fatigue life of Alloy 617 at 950 deg. C. However, purely strain-controlled loading waveforms cannot produce creep-dominant interaction due to rapid stress-relaxation of Alloy 617. This study employs a novel loading profile with a combination of strain and force-control to produce varying proportions of creep and fatigue damage. The Time Fraction Rule is found to be inaccurate for life prediction for this novel loading waveform. A new method for calculating the creep damage fraction is proposed with the objective of predicting creep-fatigue life for traditional purely strain-controlled and novel hybrid control loading waveforms. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Assessment of structural, thermal, and mechanical properties of portlandite through molecular dynamics simulations

The structural, thermal, and mechanical properties of portlandite, the primary solid phase of ordinary hydrated cement paste, are investigated using the molecular dynamics method. To understand the effects of temperature on the structural properties of portlandite, the coefficients of thermal expansion of portlandite are determined in the current study and validated with what reported from the experimental tests. The atomic structure of portlandite equilibrated at various temperatures is then subjected to uniaxial tensile strains in the three orthogonal directions and the stress-strain curves are developed. Based on the obtained results, the effect of the direction of straining on the mechanical properties of portlandite is investigated in detail. Structural damage analysis is performed to reveal the failure mechanisms in different directions. The energies of the fractured surfaces are calculated in different directions and compared to those of the ideal surfaces available in the literature. The key mechanical properties, including tensile strength, Young's modulus, and fracture strain, are extracted from the stress-strain curves. The sensitivity of the obtained mechanical properties to temperature and strain rate is then explored in a systematic way. This leads to valuable information on how the structural and mechanical properties of portlandite are affected under various exposure conditions and loading rates. - Graphical abstract: Fracture mechanism of portlandite under uniaxial strain in the z-direction. - Highlights: • The structural, thermal, and mechanical properties of portlandite are investigated. • The coefficients of thermal expansion are determined. • The stress-strain relationships are studied in three orthogonal directions. • The effects of temperature and strain rate on mechanical properties are examined. • The plastic energy required for fracture in the crystalline structure is reported.

36 MATERIALS SCIENCE↗

Displacement Fields and Self-Energies of Circular and Polygonal Dislocation Loops in Homogeneous and Layered Anisotropic Solids

There are large classes of materials problems that involve the solutions of stress, displacement, and strain energy of dislocation loops in elastically anisotropic solids, including increasingly detailed investigations of the generation and evolution of irradiation induced defect clusters ranging in sizes from the micro- to meso-scopic length scales. Based on a two-dimensional Fourier transform and Stroh formalism that are ideal for homogeneous and layered anisotropic solids, we have developed robust and computationally efficient methods to calculate the displacement fields for circular and polygonal dislocation loops. Using the homogeneous nature of the Green tensor of order -1, we have shown that the displacement and stress fields of dislocation loops can be obtained by numerical quadrature of a line integral. In addition, it is shown that the sextuple integrals associated with the strain energy of loops can be represented by the product of a pre-factor containing elastic anisotropy effects and a universal term that is singular and equal to that for elastic isotropic case. Furthermore, we have found that the self-energy pre-factor of prismatic loops is identical to the effective modulus of normal contact, and the pre-factor of shear loops differs from the effective indentation modulus in shear by only a few percent. These results provide a convenient method for examining dislocation reaction energetic and efficient procedures for numerical computation of local displacements and stresses of dislocation loops, both of which play integral roles in quantitative defect analyses within combined experimental–theoretical investigations.

36 MATERIALS SCIENCE↗

Measurement of elastic constants of monoclinic nickel-titanium and validation of first principles calculations

Polycrystalline, monoclinic nickel-titanium specimens were subjected to tensile and compressive deformations while neutron diffraction spectra were recorded in situ. Using these data, orientation-specific and macroscopic Young's moduli are determined from analysis of linear-elastic deformation exhibited by 13 unique orientations of monoclinic lattices and their relationships to each macroscopic stress and strain. Five of 13 elastic compliance constants are also identified: s{sub 11} = 1.15, s{sub 15} = -1.10, s{sub 22} = 1.34, s{sub 33} = 1.06, s{sub 35} = -1.54, all Multiplication-Sign 10{sup -2} GPa{sup -1}. Through these results, recent atomistic calculations of monoclinic nickel-titanium elastic constants are validated.

36 MATERIALS SCIENCE↗

Numerical and Experimental Analysis of Dissimilar Repair Welding Residual Stress in P91 Steel Considering Solid-State Phase Transformation

Repair welding is a popular method to repair the cracked zones of pipes in power plants. However, residual stresses induced by repair welding are inevitably generated and have a significant effect on the performance of repair-welded components during service. The purpose of this research is to investigate the effects of solid-state phase transformation (SSPT) on the repair welding residual stress distribution of multi-layer and multi-pass welding in P91 steel. Based on thermal elastic-plastic theory, a three-dimensional thermal–metallurgical–mechanical finite element model considering the SSPT is established, and shielded metal arc welding (SMAW) heat input is modelled as one double elliptical heat source. The effect of phase transformation on residual stress is investigated by considering effects with and without phase transformation in the database of materials. The results show that transverse compressive stress and a low longitudinal stress area are generated in the final pass due to martensite transformation. Compared with different zones along the thickness direction, the effect of SSPT is greater around the outer surface than around the internal fusion zone. The rationality of the developed finite element model is verified by the experimental method, and good agreement is obtained between those results from the numerical analysis and experimental methods.

36 MATERIALS SCIENCE↗

Effects of applied strain on nanoscale self-interstitial cluster formation in BCC iron

The effect of applied strains on the configurational evolution of self-interstitial clusters in BCC iron (Fe) is explored with atomistic simulations. A novel cluster configuration is discovered at low temperatures (<600 K), which consists of <110> dumbbells and <111> crowdions in a specific configuration, resulting in an immobile defect. The stability and diffusion of this cluster at higher temperatures is explored. In addition, an anisotropy distribution factor of a particular [hkl] interstitial loop within the family of < hkl > loops is calculated as a function of strain. Here, the results show that loop anisotropy is governed by the angle between the stress direction and the orientation of the <111> crowdions in the loop, and directly linked to the stress induced preferred nucleation of self-interstitial atoms.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluating design safety margins in the American Society of Mechanical Engineers graphite core components design-by-analysis assessments

Graphite is an important material being used for core components in next-generation high-temperature gas-cooled nuclear reactors. The selection of graphite grade for a specific Designer is a complex task, dependent on reactor conditions, component functionality, and required reliability. The American Society of Mechanical Engineers (ASME) provides two semi-probabilistic design-by-analysis assessments to evaluate graphite core components against design reliability targets. The simplified assessment uses a 2-parameter Weibull distribution to describe the graphite grade’s tensile-strength distribution to establish component stress limits. The full assessment uses the 3-parameter Weibull distribution and a modified Weakest-Link Theory approach to calculate a component design probability of failure. The paper defines recommended assessment rules, which are the as-written simplified assessment and the full assessment with parameter lower bounds, the modulus update with threshold reduction, and the 2027 grouping rules. Code rules are applied to three grades: 2114, IG-110, and NBG-18. The baseline margin calculation is developed using the experimental tensile dogbone specimen. Percent margin is defined as the percent reduction in the median experimental load to obtain the allowable load per ASME assessments. Under the recommended rules, the SRC–1 margin in the simplified assessment ranged from 40.2 % to 52.7 % among the grades in this study and from 36.1 % to 49.8 % in the full assessment. The full assessment only decreases the margins by 2.5–4.5 % for the SRC-1 components and 0–1.5 % for the SRC-2 components for this baseline case. Margin is inversely related to material median strength (i.e., the strongest grade, 2114, has the lowest margin).

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗