Search NASA⌕ Search

SEARCH · Search NASA

Results for “Short range order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Structure–property relations of sodium iron phosphate nuclear waste glasses: Effects of iron redox ratio and glass composition

Iron phosphate glasses, known for their exceptional chemical durability and potential applicability in nuclear waste management, have gained significant attention over the years. The structures of these glasses are complicated by the coexistence of Fe 3+ and Fe 2+ , which plays a crucial role in determining their structures and properties. Here, this work uses molecular dynamics simulations to study the structural changes in Na 2 O–Fe 2 O 3 –P 2 O 5 glasses with varying glass composition and Fe 2+ /Fe 3+ redox ratio. It was found that the redox ratio and modifier contents significantly affected the short-range and medium-range orders in the glasses. Significant changes in the local environments around P 5+ and Fe 3+ were observed, as reflected by the bond distances and coordination numbers. Na + cations are found to preferentially associate with Fe 3+ (rather than Fe 2+ ), whereas Fe 2+ has stronger association with P 5+ than Na + , confirming the structural role of Fe 2+ as a glass modifier. The disruptions in P–O–P linkages upon increasing FeO suggest that FeO causes glass depolymerization. These glasses achieved higher connectivity with increasing Fe 3+ / (Fe 3+ + Fe 2+ ) ratios, conerting phosphorous Q 2 to Q 3 units and iron Q 5 units to Q 4 units. The decrease of nonbridging oxygen fractions with increasing Fe 3+ / (Fe 3+ + Fe 2+ ) ratios, through creating P–O–Fe linkages, is the main reason of enhanced network connectivity. Quantitative structure–property relationship analyses with different structural descriptors were used to correlate with measured properties. The analyses provided valuable insights into structure–property relationships, emphasizing the importance of choosing relevant energy parameters and defining glass network connectivity, particularly in F net descriptors. It was found the Fe–O–P linkage density exhibits strong correlations to measured dissolution rates, supporting the importance of these linkages in improving the chemical durability in iron phosphate glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of dilution in the cobalt subsystem on phase transitions in rare-earth cobaltites RBaCo{sub 4–x}M{sub x}O{sub 7} (R = Dy–Er, Yb, Y; M = Al, Zn)

We have experimentally studied the structural and elastic characteristics of rare-earth cobaltites RBaCo{sub 4–x}M{sub x}O{sub 7} (R = Dy–Er, Yb, Y), in which cobalt ions are partly substituted by diamagnetic Al or Zn ions. It was found that small substitution of Co{sup 3+} ions by Al{sup 3+} ions in the YbRBaCo{sub 4–x}M{sub x}O{sub 7} system (x = 0.1, 0.2, 0.5) leads to a rapid decrease and smearing of ΔE(T)/E{sub 0} anomalies of the Young’s modulus in the region of the structural phase transition, which is accompanied by increasing hysteresis. Pure rare-earth cobaltites RBaCo{sub 4}O{sub 7} (R = Dy–Er, Y) exhibit a correlation between the room-temperature structure distortion and hysteresis on the ΔE(T)/E{sub 0} curve in a temperature interval of 80–280 K. In Zn-substituted cobaltites RBaCoZn{sub 3}O{sub 7}, both the hysteresis and ΔE(T)/E{sub 0} anomalies disappear, as do low-temperature sound absorption maxima. This behavior is evidence of the suppression of structural and magnetic phase transitions and the retention of only short-range correlations of the order parameter in Zn-substituted samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Liquid Structures and Physical Properties -- Ground Based Studies for ISS Experiments

Studies of electrostatically-levitated supercooled liquids have demonstrated strong short- and medium-range ordering in transition metal and alloy liquids, which can influence phase transitions like crystal nucleation and the glass transition. The structure is also related to the liquid properties. Planned ISS experiments will allow a deeper investigation of these results as well as the first investigations of a new type of coupling in crystal nucleation in primary crystallizing liquids, resulting from a linking of the stochastic processes of diffusion with interfacial-attachment. A brief description of the techniques used for ground-based studies and some results relevant to planned ISS investigations are discussed.

Kelton, K. F.↗

The 4th order GISS model of the global atmosphere

The new GISS 4th order model of the global atmosphere is described. It is based on 4th order quadratically conservative differences with the periodic application of a 16th order filter on the sea level pressure and potential temperature equations, a combination which is approximately enstrophy conserving. Several short range forecasts indicate a significant improvement over 2nd order forecasts with the same resolution (approximately 400 km). However the 4th order forecasts are somewhat inferior to 2nd order forecasts with double resolution. This is probably due to the presence of short waves in the range between 1000 km and 2000 km, which are computed more accurately by the 2nd order high resolution model. An operation count of the schemes indicates that with similar code optimization, the 4th order model will require approximately the same amount of computer time as the 2nd order model with the same resolution. It is estimated that the 4th order model with a grid size of 200 km provides enough accuracy to make horizontal truncation errors negligible over a period of a week for all synoptic scales (waves longer than 1000 km).

Kalnay-Rivas, E.↗

Strain engineered pyrochlore at high pressure

Strain engineering is a promising method for next-generation materials processing techniques. Here, we use mechanical milling and annealing followed by compression in diamond anvil cell to tailor the intrinsic and extrinsic strain in pyrochlore, Dy 2 Ti 2 O 7 and Dy 2 Zr 2 O 7 . Raman spectroscopy, X-ray pair distribution function analysis, and X-ray diffraction were used to characterize atomic order over short-, medium-, and long-range spatial scales, respectively, under ambient conditions. Raman spectroscopy and X-ray diffraction were further employed to interrogate the material in situ at high pressure. High-pressure behavior is found to depend on the species and concentration of defects in the sample at ambient conditions. Overall, we show that defects can be engineered to lower the phase transformation onset pressure by ~50% in the ordered pyrochlore Dy 2 Zr 2 O 7 , and lower the phase transformation completion pressure by ~20% in the disordered pyrochlore Dy 2 Zr 2 O 7 . These improvements are achieved without significantly sacrificing mechanical integrity, as characterized by bulk modulus.

36 MATERIALS SCIENCE↗

On the representation of many-body interactions in water

Recent work has shown that the many-body expansion of the interaction energy can be used to develop analytical representations of global potential energy surfaces (PESs) for water. In this study, the role of short- and long-range interactions at different orders is investigated by analyzing water potentials that treat the leading terms of the many-body expansion through implicit (i.e., TTM3-F and TTM4-F PESs) and explicit (i.e., WHBB and MB-pol PESs) representations. It is found that explicit short-range representations of 2-body and 3-body interactions along with a physically correct incorporation of short- and long-range contributions are necessary for an accurate representation of the water interactions from the gas to the condensed phase. Similarly, a complete many-body representation of the dipole moment surface is found to be crucial to reproducing the correct intensities of the infrared spectrum of liquid water.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observations of Long- and Short-Range Wakefield Efects on e-Beam Dynamics in TESLA-type SCRF Cavities [Slides]

The outline for this presentations is as follows: I. Introduction. II. Injector beamline and streak camera viewing optical transition radiation (OTR) screen at X121. -Strategy of beam steering off axis into TESLA Cavities to generate wakefields and beam effects. III. Previous long long-range wakefield test, Higher Higher-order Modes (HOMs). IV. Initial observations of short short-range wakefield effects. V. Summary.

43 PARTICLE ACCELERATORS↗

Entanglement and area law with a fractal boundary in a topologically ordered phase

Quantum systems with short-range interactions are known to respect an area law for the entanglement entropy: The von Neumann entropy S associated to a bipartition scales with the boundary p between the two parts. Here we study the case in which the boundary is a fractal. We consider the topologically ordered phase of the toric code with a magnetic field. When the field vanishes it is possible to analytically compute the entanglement entropy for both regular and fractal bipartitions (A,B) of the system and this yields an upper bound for the entire topological phase. When the A-B boundary is regular we have S/p=1 for large p. When the boundary is a fractal of the Hausdorff dimension D, we show that the entanglement between the two parts scales as S/p=gamma<=1/D, and gamma depends on the fractal considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exchange bias effect in epitaxial La{sub 0.67}Ca{sub 0.33}MnO{sub 3}/SrMnO{sub 3} thin film structure

Bilayers consisting of La{sub 0.67}Ca{sub 0.33}MnO{sub 3} (LCMO) and SrMnO{sub 3} (SMO) have been prepared by pulsed-laser deposition on SrTiO{sub 3} (001) substrates. Unconventional magnetic coupling was found after cooling in a small field. The LCMO/SMO bilayers exhibit an exchange bias field of 209 Oe, which vanishes as the temperature rises above 90 K. A small magnetization has been found above the Curie temperature of the pure LCMO thin films. Spin-cluster-like antiferromagnetic (AFM)/ferromagnetic (FM) clusters have been deduced to exist at the interface due to the competing types of magnetic order at the interface. The magnetic relaxation is found to follow a double-exponential equation and a slow relaxation process is observed due to the strong exchange coupling between AFM/FM clusters and the LCMO layer. We speculate that the short-range high-temperature FM order of the Mn{sup 3+} and Mn{sup 4+} moments above the Curie temperature at the interface gives rise to the magnetic regions that pin the FM LCMO layer as the temperature decreases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Perturbation theory for short-range weakly-attractive potentials in one dimension

We have obtained the perturbative expressions up to sixth order for the energy of the bound state in a one dimensional, arbitrarily weak, short range finite well, applying a method originally developed by Gat and Rosenstein Ref. [1]. The expressions up to fifth order reproduce the results already known in the literature, while the sixth order had not been calculated before. As an illustration of our formulas we have applied them to two exactly solvable problems and to a nontrivial problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reentrant glass transition leading to ultrastable metallic glass

Polyamorphs are often observed in amorphous matters, and a representative example is the reentrant glass transition in colloid systems. For metallic amorphous alloys, however, the cases reported so far are limited to metallic glasses (MGs) that undergo electronic transitions under gigapascal applied pressure, or the presence of two liquids at the same composition. In this paper, we report the first observation of a reentrant glass transition in MGs. This unusual reentrant glass transition transforms an MG from its as-quenched state (Glass I) to an ultrastable state (Glass II), mediated by the supercooled liquid of Glass I. Specifically, upon heating to above its glass transition temperature under ambient pressure, Glass I first transitions into its supercooled liquid, which then transforms into a new Glass II, accompanied by an exothermic peak in calorimetric scan, together with a precipitous drop in volume, electrical resistance and specific heat, as well as clear evidence of local structural ordering on the short-to-medium-range scale revealed via in-situ synchrotron X-ray scattering. Atomistic simulations indicate enhanced ordering of locally favored motifs to establish correlations in the medium range that resemble those in equilibrium crystalline compounds. The resulting lower-energy Glass II has its own glass transition temperature higher than that of Glass I by as much as 50 degrees. This route thus delivers a thermodynamically and kinetically ultrastable MG that can be easily retained to ambient conditions.

36 MATERIALS SCIENCE↗

Unique effects of thermal and pressure histories on glass hardness: Structural and topological origin

The properties of glass are determined not only by temperature, pressure, and composition, but also by their complete thermal and pressure histories. Here, we show that glasses of identical composition produced through thermal annealing and through quenching from elevated pressure can result in samples with identical density and mean interatomic distances, yet different bond angle distributions, medium-range structures, and, thus, macroscopic properties. We demonstrate that hardness is higher when the density increase is obtained through thermal annealing rather than through pressure-quenching. Molecular dynamics simulations reveal that this arises because pressure-quenching has a larger effect on medium-range order, while annealing has a larger effect on short-range structures (sharper bond angle distribution), which ultimately determine hardness according to bond constraint theory. Our work could open a new avenue towards industrially useful glasses that are identical in terms of composition and density, but with differences in thermodynamic, mechanical, and rheological properties due to unique structural characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning magnetic antiskyrmion stability in tetragonal inverse Heusler alloys

The identification of materials supporting complex, tunable magnetic order at ambient temperatures is foundational to the development of new magnetic device architectures. In this work, we report the design of Mn 2 XY tetragonal inverse Heusler alloys that are capable of hosting magnetic antiskyrmions whose stability is sensitive to elastic strain. Here We first construct a universal magnetic Hamiltonian capturing the short- and long-range magnetic order which can be expected in these materials. This model reveals critical combinations of magnetic interactions that are necessary to approach a magnetic phase boundary, where the magnetic structure is highly susceptible to small perturbations such as elastic strain. We then computationally search for quaternary Mn 2 (X 1 , X 2 ) Y alloys where these critical interactions may be realized and which are likely to be synthesizable in the inverse Heusler structure. We identify the Mn 2 Pt 1–z X z Ga family of materials with X = Au, Ir, Ni as an ideal system for accessing all possible magnetic phases, with several critical compositions where magnetic phase transitions may be actuated mechanically.

36 MATERIALS SCIENCE↗

Y 1-x La x VO 3 : Effects of doping on orbital ordering

For this research, the effects of isovalent doping on orbital ordering in the perovskite Y 1-x La x VO 3 were investigated using neutron diffraction and the pair distribution function analysis. YVO 3 is a prototype for orbital ordering, exhibiting two consecutive transitions to G-type and C-type ordering with decreasing temperature. Evidence for local orbital ordering above the transition temperature of T OO ~200 K is presented, obtained from the temperature dependence of the oxygen-oxygen octahedral correlations. This suggests that locally, G-type orbital ordering is present above the T OO temperature but it is short range. With doping, it is expected that orbital ordering disappears altogether. In conclusion, by 30% of doping, as in Y 0.7 La 0.3 VO 3 , even though no orbital ordering is expected, we find that locally, C-type orbital correlations are most likely present below the magnetic transition temperature T N , allowing for a direct paramagnetic to orbitally ordered/antiferromagnetic transition in this composition.

36 MATERIALS SCIENCE↗

Identifying barriers to charge-carriers in the bulk and surface regions of Cu 2 ZnSnS 4 nanocrystal films by x-ray absorption fine structures (XAFSs)

Solar cell performance is most affected by the quality of the light absorber layer. For thin-film devices, this becomes a two-fold problem of maintaining a low-cost design with well-ordered nanocrystal (NC) structure. The use of Cu 2 ZnSnS 4 (CZTS) NCs as the light absorber films forms an ideal low-cost design, but the quaternary structure makes it difficult to maintain a well-ordered layer without the use of high-temperature treatments. There is little understanding of how CZTS NC structures affect the photoconversion efficiency, the charge-carriers, and therefore the performance of the device manufactured from it. To examine these relationships, the measured photoresponse from the photo-generation of charge-carrier electron-hole pairs was compared against the crystal structure, as short-range and long-range crystal orders for the films. The photoresponse simplifies the electronic properties into three basic steps that can be associated with changes in energy levels within the band structure. These changes result in the formation of barriers to charge-carrier flow. In this work, the extent of these barriers was determined using synchrotron-based X-ray absorbance fine structure to probe the individual metal centers in the film, and comparing these to molecular simulations of the ideal extended xray absorbance fine structure scattering. This allowed for the quantification of bond lengths, and thus an interpretation of the distortions in the crystal lattice. The various characteristics of the photoresponse were then correlated to the crystallographic order and used to gain physical insight into barriers to charge-carriers in the bulk and surface regions of CZTS films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of cobalt mononitride thin films prepared using DC and high power impulse magnetron sputtering

In this work we studied cobalt mononitride (CoN) thin films deposited using dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS). A Co target was sputtered using pure N{sub 2} gas alone as the sputtering medium. Obtained long-range structural ordering was studies using x-ray diffraction (XRD), short-range structure using Co L{sub 2,3} and N K absorption edges using soft x-ray absorption spectroscopy (XAS) and the surface morphology using atomic force microscopy (AFM). It was found that HiPIMS deposited films have better long-range ordering, better stoichiometric ratio for mononitride composition and smoother texture as compared to dcMS deposited films. In addition, the thermal stability of HiPIMS deposited CoN film seems to be better. On the basis of different type of plasma conditions generated in HiPIMS and dcMS process, obtained results are presented and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular anisotropy effects in carbon K-edge scattering: depolarized diffuse scattering and optical anisotropy

Some polymer properties, such as conductivity, are very sensitive to short- and intermediate-range orientational and positional ordering of anisotropic molecular functional groups, and yet means to characterize orientational order in disordered systems are very limited. We demonstrate that resonant scattering at the carbon K-edge is uniquely sensitive to short-range orientation correlations in polymers through depolarized scattering at high momentum transfers, using atactic polystyrene as a well-characterized test system. Depolarized scattering is found to coexist with unpolarized fluorescence, and to exhibit pronounced anisotropy. We also quantify the spatially averaged optical anisotropy from low-angle reflectivity measurements, finding anisotropy consistent with prior visible, x-ray absorption, and theoretical studies. The average anisotropy is much smaller than that in the depolarized scattering and the two have different character. Both measurements exhibit clear spectral signatures from the phenyl rings and the polyethylene-like backbone. Discussion focuses on analysis considerations and prospects for using this depolarized scattering for studies of disorder in soft condensed matter.

25 ENERGY STORAGE↗

Periodic local MP2 method employing orbital specific virtuals

We introduce orbital specific virtuals (OSVs) to represent the truncated pair-specific virtual space in periodic local Møller-Plesset perturbation theory of second order (LMP2). The OSVs are constructed by diagonalization of the LMP2 amplitude matrices which correspond to diagonal Wannier-function (WF) pairs. Only a subset of these OSVs is adopted for the subsequent OSV-LMP2 calculation, namely, those with largest contribution to the diagonal pair correlation energy and with the accumulated value of these contributions reaching a certain accuracy. The virtual space for a general (non diagonal) pair is spanned by the union of the two OSV sets related to the individual WFs of the pair. In the periodic LMP2 method, the diagonal LMP2 amplitude matrices needed for the construction of the OSVs are calculated in the basis of projected atomic orbitals (PAOs), employing very large PAO domains. It turns out that the OSVs are excellent to describe short range correlation, yet less appropriate for long range van der Waals correlation. In order to compensate for this bias towards short range correlation, we augment the virtual space spanned by the OSVs by the most diffuse PAOs of the corresponding minimal PAO domain. The Fock and overlap matrices in OSV basis are constructed in the reciprocal space. The 4-index electron repulsion integrals are calculated by local density fitting and, for distant pairs, via multipole approximation. New procedures for determining the fit-domains and the distant-pair lists, leading to higher efficiency in the 4-index integral evaluation, have been implemented. Generally, and in contrast to our previous PAO based periodic LMP2 method, the OSV-LMP2 method does not require anymore great care in the specification of the individual domains (to get a balanced description when calculating energy differences) and is in that sense a black box procedure. Discontinuities in potential energy surfaces, which may occur for PAO-based calculations if one is not careful, virtually disappear for OSV-LMP2. Moreover, due to much increased compactness of the pair-specific virtual spaces, the OSV-LMP2 calculations are faster and require much less memory than PAO-LMP2 calculations, despite the noticeable overhead of the initial OSV construction procedure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗