Search NASA⌕ Search

SEARCH · Search NASA

Results for “Signal generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High-Performance Piezo-Electrocatalytic Sensing of Ascorbic Acid with Nanostructured Wurtzite Zinc Oxide

We report nanostructured piezoelectric semiconductors offer unprecedented opportunities for high-performance sensing in numerous catalytic processes of biomedical, pharmaceutical, and agricultural interests, leveraging piezocatalysis that enhances the catalytic efficiency with the strain-induced piezoelectric field. Here, we design and demonstrate for the first time a cost-efficient, high-performance piezo-electrocatalytic sensor for detecting L-ascorbic acid (AA), a critical chemical for many organisms, metabolic processes, and medical treatments. We prepared ZnO nanorods and nanosheets to characterize and compare their efficacy for the piezo-electrocatalysis of AA. The electrocatalytic efficacy of AA was significantly boosted by the piezoelectric polarization induced in the nanostructured semiconducting ZnO catalysts. We elucidated the charge transfer between the strained ZnO nanostructures and AA to reveal the mechanism for the related piezo-electrocatalytic process. The low-temperature synthesis of high-quality ZnO nanostructures allows the low-cost, scalable production and integration directly into wearable electrocatalytic sensors whose performance could be boosted by otherwise wasted mechanical energy from the working environment, e.g., the human-generated mechanical signals.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Rapid RASER MRI

Conventional Magnetic Resonance Imaging (MRI) relies on high-power Radio-Frequency (RF) pulses to excite nuclear spins and in turn generate NMR signals. These pulses require large high-power RF-amplifiers and cause heat deposition in the tissue, which must be minimized for safety, presenting a growing problem when moving toward ever-higher field MRI. An alternative to RF-pulse excitation is self-excitation of nuclear spins using Radiofrequency Amplification by Stimulated Emission of Radiation (RASER), where the nuclear spins undergo spontaneous transition, without RF excitation, from an over-populated state to a ground state. Here, the feasibility of recording rapid proton RASER MRI images of pyrazine at low concentration (120 mM) with large matrix (128x128 pixels) in as little as 78 ms is demonstrated at 500 MHz (11.7 T). We also recorded a time-series of images using a single bolus hyperpolarized pyrazine highlighting the feasibility of dynamic tracking. Here, the demonstrated approach allows recording MRI scans without transmit-receive electronics of the MRI scanner, which is highly desirable for portable MRI as well as the emerging field of hyperpolarized MRI using, e.g., HP protons, 129 Xe gas or HP 13 C labeled biomolecules as molecular tracers and imaging agents.

MRI↗
DOE OSTI2018

Acoustic Emission-Based Methodology to Evaluate Delamination Crack Growth Under Quasi-static and Fatigue Loading Conditions

The aim of this study was to investigate the applicability of acoustic emission (AE) technique to evaluate delamination crack in glass/epoxy composite laminates under quasi-static and fatigue loading. To this aim, double cantilever beam specimens were subjected to mode I quasi-static and fatigue loading conditions and the generated AE signals were recorded during the tests. By analyzing the mechanical and AE results, an analytical correlation between the AE energy with the released strain energy and the crack growth was established. It was found that there is a 3rd degree polynomial correlation between the crack growth and the cumulative AE energy. Using this correlation the delamination crack growth was predicted under both the static and fatigue loading conditions. The predicted crack growth values was were in a good agreement with the visually recorded data during the tests. The results indicated that the proposed AE-based method has good applicability to evaluate the delamination crack growth under quasi-static and fatigue loading conditions, especially when the crack is embedded within the structure and could not be seen visually.

42 ENGINEERING↗
DOE OSTI2021

Manipulating cobalt oxide on N-doped aligned electrospun carbon nanofibers towards instant electrochemical detection of dopamine secreted by living cells

A demand exists for the development of miniaturized biosensors with high sensitivity and a wide dynamic range for rapid detecting dopamine (DA) levels. Here, an electrochemical sensor is created by decorating closely packed cobalt oxide (Co 3 O 4 ) nanograins on nitrogen-doped electrospun carbon nanofibers (NECNFs) via a facile electrodeposition method. The carbon nanofiber matrix provides both a scaffold with ultrahigh surface area for homogeneous dispersion of cobalt oxide nanostructures and facilitates the electrochemical conductivity for the hybrid electrode. The sensing principle is based on the redox reaction between DA and DA quinone that generates electrical signal, which is detectable via differential pulse voltammetry (DPV) and chronoamperometry (CA). Owing to a high electroactive surface area and facilitating electron transfer between electrode surface and the target molecule, the electrical sensing platform exhibits superior sensitivity and selectivity toward DA, with an excellent limit of detection (9 nM) over a wide range of concentrations (0.01 to 100 μM). Moreover, based on its excellent sensing properties and biocompatibility, the sensor has been used for the real-time monitoring exogeneous DA released from pheochromocytoma (PC12) cells. This work demonstrates promise of a novel sensor technology that may render rapid point-of-care testing of DA towards early clinical diagnosis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Detailed analysis of the effects of stencil spatial variations with arbitrary high-order finite-difference Maxwell solver

Due to discretization effects and truncation to finite domains, many electromagnetic simulations present non-physical modifications of Maxwell's equations in space that may generate spurious signals affecting the overall accuracy of the result. Such modifications for instance occur when Perfectly Matched Layers (PMLs) are used at simulation domain boundaries to simulate open media. Another example is the use of arbitrary order Maxwell solver with domain decomposition technique that may under some condition involve stencil truncations at subdomain boundaries, resulting in small spurious errors that do eventually build up. In each case, a careful evaluation of the characteristics and magnitude of the errors resulting from these approximations, and their impact at any frequency and angle, requires detailed analytical and numerical studies. To this end, we present a general analytical approach that enables the evaluation of numerical discretization errors of fully three-dimensional arbitrary order finite-difference Maxwell solver, with arbitrary modification of the local stencil in the simulation domain. The analytical model is validated against simulations of domain decomposition technique and PMLs, when these are used with very high-order Maxwell solver, as well as in the infinite order limit of pseudo-spectral solvers. Results confirm that the new analytical approach enables exact predictions in each case. It also confirms that the domain decomposition technique can be used with very high-order Maxwell solver and a reasonably low number of guard cells with negligible effects on the whole accuracy of the simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Multi-arrival infrasound from meteoroids: Fragmentation signatures versus propagation effects in a fine-scale layered atmosphere

Infrasonic signatures of meteoroid fragmentation are frequently ambiguous: do multiple arrivals signify a complex breakup or merely the distorting effects of a layered atmosphere? Resolving this ambiguity is critical for accurate energy estimates and source reconstruction. In this study, we address this challenge by analyzing a unique regional dataset of well-constrained meteoroid events observed by the Southern Ontario Meteor Network and the co-located Elginfield Infrasound Array. We employ pseudo-differential parabolic equation (PPE) simulations to quantify how fine-scale gravity-wave structures in the stratosphere and lower thermosphere modify acoustic waveforms at ranges <300 km. Our modeling reveals that while fine-scale layering can stretch signals and generate diffuse oscillatory tails, it does not produce discrete, high-amplitude pulse splitting at ranges below ∼140 km. By applying these results to the rare multi-arrival event 20060305, we demonstrate that its distinct double arrival at 100 km range is inconsistent with atmospheric multipathing and provides definitive evidence of separate fragmentation episodes. These findings establish new diagnostic criteria for separating source physics from propagation artifacts, improving the reliability of infrasound as a monitoring tool for natural bolides, space debris re-entries, and catastrophic launch failures.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

Intrafraction Verification of Gated RapidArc by Using Beam-Level Kilovoltage X-Ray Images

Purpose: To verify the geometric accuracy of gated RapidArc treatment using kV images acquired during dose delivery. Methods and Materials: Twenty patients were treated using the gated RapidArc technique with a Varian TrueBeam STx linear accelerator. One to 7 metallic fiducial markers were implanted inside or near the tumor target before treatment simulation. For patient setup and treatment verification purposes, the internal target volume (ITV) was created, corresponding to each implanted marker. The gating signal was generated from the Real-time Position Management (RPM) system. At the beginning of each fraction, individualized respiratory gating amplitude thresholds were set based on fluoroscopic image guidance. During the treatment, we acquired kV images immediately before MV beam-on at every breathing cycle, using the on-board imaging system. After the treatment, all implanted markers were detected, and their 3-dimensional (3D) positions in the patient were estimated using software developed in-house. The distance from the marker to the corresponding ITV was calculated for each patient by averaging over all markers and all fractions. Results: The average 3D distance between the markers and their ITVs was 0.8 {+-} 0.5 mm (range, 0-1.7 mm) and was 2.1 {+-} 1.2 mm at the 95th percentile (range, 0-3.8 mm). On average, a left-right margin of 0.6 mm, an anterior-posterior margin of 0.8 mm, and a superior-inferior margin of 1.5 mm is required to account for 95% of the intrafraction uncertainty in RPM-based RapidArc gating. Conclusion: To our knowledge, this is the first clinical report of intrafraction verification of respiration-gated RapidArc treatment in stereotactic ablative radiation therapy. For some patients, the markers deviated significantly from the ITV by more than 2 mm at the beginning of the MV beam-on. This emphasizes the need for gating techniques with beam-on/-off controlled directly by the actual position of the tumor target instead of external surrogates such as RPM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Exponential Increase in Relative Biological Effectiveness Along Distal Edge of a Proton Bragg Peak as Measured by Deoxyribonucleic Acid Double-Strand Breaks

Purpose: To quantify the relative biological effectiveness (RBE) of the distal edge of the proton Bragg peak, using an in vitro assay of DNA double-strand breaks (DSBs). Methods and Materials: U2OS cells were irradiated within the plateau of a spread-out Bragg peak and at each millimeter position along the distal edge using a custom slide holder, allowing for simultaneous measurement of physical dose. A reference radiation signal was generated using photons. The DNA DSBs at 3 hours (to assess for early damage) and at 24 hours (to assess for residual damage and repair) after irradiation were measured using the γH2AX assay and quantified via flow cytometry. Results were confirmed with clonogenic survival assays. A detailed map of the RBE as a function of depth along the Bragg peak was generated using γH2AX measurements as a biological endpoint. Results: At 3 hours after irradiation, DNA DSBs were higher with protons at every point along the distal edge compared with samples irradiated with photons to similar doses. This effect was even more pronounced after 24 hours, indicating that the impact of DNA repair is less after proton irradiation relative to photons. The RBE demonstrated an exponential increase as a function of depth and was measured to be as high as 4.0 after 3 hours and as high as 6.0 after 24 hours. When the RBE-corrected dose was plotted as a function of depth, the peak effective dose was extended 2-3 mm beyond what would be expected with physical measurement. Conclusions: We generated a highly comprehensive map of the RBE of the distal edge of the Bragg peak, using a direct assay of DNA DSBs in vitro. Our data show that the RBE of the distal edge increases with depth and is significantly higher than previously reported estimates.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

Pd and octahedra do not get along: Square planar [PdS 4 ] units in non-centrosymmetric La 6 PdSi 2 S 14

Non-linear optical (NLO) materials require a balance of high second-harmonic generation (SHG) signal and laser damage threshold (LDT), as well as phase matchable behavior. Herein, we report a new member of the (RE) 6 (TM) x (Tt) 2 Q 14 family of compounds, La 6 PdSi 2 S 14 , which, unlike all other reported TM analogues crystallizing in hexagonal P6 3 space group, crystallizes in the non-centrosymmetric monoclinic P2 1 space group. The crystal structure contains chains of edge-sharing distorted square planar [PdS 4 ] units. The square-planar coordination of Pd in La 6 PdSi 2 S 14 exhibits remarkable NLO properties with high SHG (3.7 × AgGaS 2 ) and LDT (3 × AgGaS 2 ) values as well as phase matchability. This shows the promise of novel materials with distorted structural motifs for enhanced NLO properties. Further, upon formation of bimetallic chiral sulfides containing both Cu and Pd, Cu occupies the opposite faces of the octahedra forming [CuS 3 ] units while Pd can be stabilized in the center of PdS 6 octahedra in the hexagonal P6 3 crystal structure of La 6 Pd 0.5 CuSi 2 S 14 . This suggests that it is possible to form mixed metal systems which could further enhance NLO properties by incorporation of additional structural distortions.

36 MATERIALS SCIENCE↗
DOE OSTI2017

KATANA – A charge-sensitive triggering system for the SπRIT experiment

KATANA - the Krakow Array for Triggering with Amplitude discrimiNAtion - has been built and used as a trigger and veto detector for the SπRIT TPC at RIKEN. Its construction allows operating in magnetic field and providing fast response for ionizing particles, giving an approximate forward multiplicity and charge information. Depending on this information, trigger and veto signals are generated. The article presents performance of the detector and details of its construction. A simple phenomenological parametrization of the number of emitted scintillation photons in plastic scintillator is proposed. The effect of the light output deterioration in the plastic scintillator due to the in-beam irradiation is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2011

A Leptophobic Z' And Dark Matter From Grand Unification

We explore the phenomenology of Grand Unified Models based on the E_6 group, focusing on the Z' with suppressed couplings to leptons that can appear in such models. We find that this Z' can accommodate the W+dijets anomaly reported by the CDF collaboration. Furthermore, a viable dark matter candidate in the form of a right-handed sneutrino is also present within the fundamental 27-dimensional representation of E_6. Through its sizable couplings to the Z', the dark matter is predicted to possess an elastic scattering cross section with neutrons which can generate the signals reported by the CoGeNT and DAMA/LIBRA collaborations. To avoid being overproduced in the early universe, the dark matter must annihilate to leptons through the exchange of charged or neutral fermions which appear in the 27 of E_6, providing an excellent fit to the gamma ray spectrum observed from the Galactic Center by the Fermi Gamma Ray Space Telescope.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2011

CoGeNT, DAMA, and Light Neutralino Dark Matter

Recent observations by the CoGeNT collaboration (as well as long standing observations by DAMA/LIBRA) suggest the presence of a ∼5–10 GeV dark matter particle with a somewhat large elastic scattering cross section with nucleons ( σ∼10−40 cm2 ). Within the context of the minimal supersymmetric standard model (MSSM), neutralinos in this mass range are not able to possess such large cross sections, and would be overproduced in the early universe. Simple extensions of the MSSM, however, can easily accommodate these observations. In particular, the extension of the MSSM by a chiral singlet superfield allows for the possibility that the dark matter is made up of a light singlino that interacts with nucleons largely through the exchange of a fairly light ( ∼30–70 GeV ) singlet-like scalar higgs, h1 . Such a scenario is consistent with all current collider constraints and can generate the signals reported by CoGeNT and DAMA/LIBRA. Furthermore, there is a generic limit of the extended model in which there is a singlet-like pseudoscalar higgs, a1 , with ma1∼mh1 and in which the χ0χ0 and bb¯ , ss¯ coupling magnitudes of the h1 and a1 are very similar. In this case, the thermal relic abundance is automatically consistent with the measured density of dark matter if mχ0 is sufficiently small that χ0χ0→bb¯ is forbidden.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Development of a plug-and-play anti-noise module for fault diagnosis of rotating machines in nuclear power plants

The health of rotating machines is crucial to the stable operation and safety of nuclear power plants. However, research on machine learning-based fault diagnosis of rotating machines in the nuclear industry is still in its infancy. The signal noise generated in the plant may negatively affect the effectiveness of the analysis. In this paper, a plug-and-play anti-noise machine learning module is proposed to fill the knowledge and capability gap. The modules are loaded into a convolutional neural network called deep residual network (ResNet) to obtain a new model with noise reduction capability. The basic idea is that the module is able to identify noise features and include them in the subsequent analysis, effectively filtering noise at the feature level of the network. Nine variants of the new model are compared with the original ResNet as well as four classical machine learning models to test the effectiveness of the module and to examine the impact of the module's loading modes on the performance of the new model. Finally, this research helps facilitate the application of machine learning in the plant noise environment.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2026

Distributed optimization and control for autonomous distributed energy resource power dispatch and frequency regulation considering communication failures

Distributed energy resources (DERs) can significantly enhance grid flexibility by supplying power and secondary frequency regulation (SFR) services. Yet, their large number and dispersed nature limit the effectiveness of traditional centralized power dispatch and frequency control schemes, and expose the system to single-point communication failures. This paper presents a unified distributed optimization and control framework for DER power dispatch and SFR provision. A transmission-loss-aware distributed direct current optimal power flow is first formulated to optimize DER power dispatch and reserve scheduling. On top of this, a fully distributed control scheme for DER autonomous SFR provision is developed to allocate automatic generation control signals cost-effectively while ensuring robustness to communication link disruptions. The framework is validated on IEEE 14-bus and 39-bus transmission systems with large-scale distribution feeders using transmission-distribution dynamic co-simulation, demonstrating reliable and autonomous DER power dispatch and SFR provision under diverse operating conditions and communication contingencies.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Supramolecular Metal Halide Complexes for High-Temperature Nonlinear Optical Switches

Nonlinear optical (NLO) switching materials, which exhibit reversible intensity modulation in response to thermal stimuli, have found extensive applications across diverse fields, including sensing, photoelectronics, and photonic applications. While significant progress has been made in solid-state NLO switching materials, these materials typically showcase their highest NLO performance near room temperature. However, this performance drastically deteriorates upon heating, primarily due to the phase transition undergone by the materials from non-centrosymmetric to centrosymmetric phase. Here, we introduce a new class of NLO switching materials, solid-state supramolecular compounds 18-Crown-6 ether@Cu 2 Cl 4 ·4H 2 O (1·4H 2 O), exhibiting reversible and stable NLO switching when subjected to near-infrared (NIR) photoexcitation and/or thermal stimuli. The reversible crystal structure in response to external stimuli is attributed to the presence of a weakly coordinated bridging water molecule, facilitated by hydrogen bonding/chelation interactions between the metal halide and crown-ether supramolecules. We observed an exceptionally high second-harmonic generation (SHG) signal under continuous photoexcitation, even at temperatures exceeding 110°C. In addition, the bridging water molecules within the complex can be released and recaptured in a fully reversible manner, all without requiring excessive energy input. This feature allows for precise control of SHG signal activation and deactivation through structural transformations, resulting in a high-contrast off/on ratio, reaching values in the million-fold range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Train Traffic as a Powerful Noise Source for Monitoring Active Faults With Seismic Interferometry

Laboratory experiments report that detectable seismic velocity changes should occur in the vicinity of fault zones prior to earthquakes. However, operating permanent active seismic sources to monitor natural faults at seismogenic depth is found to be nearly impossible to achieve. We show that seismic noise generated by vehicle traffic, and especially heavy freight trains, can be turned into a powerful repetitive seismic source to continuously probe the Earth's crust at a few kilometers depth. Results of an exploratory seismic experiment in Southern California demonstrate that correlations of train-generated seismic signals allow daily reconstruction of direct P body waves probing the San Jacinto Fault down to 4-km depth. This new approach may facilitate monitoring most of the San Andreas Fault system using the railway and highway network of California.

58 GEOSCIENCES↗
DOE OSTI2021

High-energy emission from a magnetar giant flare in the Sculptor galaxy

Magnetars are the most highly magnetized neutron stars in the cosmos (with magnetic field 10 13 –10 15 G). Giant flares from magnetars are rare, short-duration (about 0.1 s) bursts of hard X-rays and soft γ rays. Owing to the limited sensitivity and energy coverage of previous telescopes, no magnetar giant flare has been detected at gigaelectronvolt (GeV) energies. Here, we report the discovery of GeV emission from a magnetar giant flare on 15 April 2020 (refs. 3,4 and A. J. Castro-Tirado et al., manuscript in preparation). The Large Area Telescope (LAT) on board the Fermi Gamma-ray Space Telescope detected GeV γ rays from 19 s until 284 s after the initial detection of a signal in the megaelectronvolt (MeV) band. Our analysis shows that these γ rays are spatially associated with the nearby (3.5 megaparsecs) Sculptor galaxy and are unlikely to originate from a cosmological γ-ray burst. Thus, we infer that the γ rays originated with the magnetar giant flare in Sculptor. Furthermore, we suggest that the GeV signal is generated by an ultra-relativistic outflow that first radiates the prompt MeV-band photons, and then deposits its energy far from the stellar magnetosphere. After a propagation delay, the outflow interacts with environmental gas and produces shock waves that accelerate electrons to very high energies; these electrons then emit GeV γ rays as optically thin synchrotron radiation. This observation implies that a relativistic outflow is associated with the magnetar giant flare, and suggests the possibility that magnetars can power some short γ-ray bursts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Distributed Optical Fiber Sensors with Ultrafast Laser Enhanced Rayleigh Backscattering Profiles for Real-Time Monitoring of Solid Oxide Fuel Cell Operations

This paper reports a technique to enhance the magnitude and high-temperature stability of Rayleigh back-scattering signals in silica fibers for distributed sensing applications. With femtosecond laser radiation, more than 40-dB enhancement of Rayleigh backscattering signal was generated in silica fibers using 300-nJ laser pulses at 250 kHz repetition rate. The laser-induced Rayleigh scattering defects were found to be stable from the room temperature to 800 °C in hydrogen gas. The Rayleigh scatter at high temperatures was correlated to the formation and modification of nanogratings in the fiber core. Using optical fibers with enhanced Rayleigh backscattering profiles as distributed temperature sensors, we demonstrated real-time monitoring of solid oxide fuel cell (SOFC) operations with 5-mm spatial resolution at 800 °C. Information gathered by these fiber sensor tools can be used to verify simulation results or operated in a process-control system to improve the operational efficiency and longevity of SOFC-based energy generation systems.

30 DIRECT ENERGY CONVERSION↗