Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solubility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Identification of Electrolyte-Soluble Organic Cross-Talk Species in a Lithium-Ion Battery via a Two-Compartment Cell

Electrode cross-talk in lithium-ion batteries has been increasingly recognized in recent years as an explanation for several performance trends during cycling. However, little is known about the nature of such cross-talk species/reactions. In an attempt to further that understanding, we constructed a two-compartment lithium-ion cell using a solid-state lithium-ion conductor as the separator to block the movement of species generated at one electrode to the other. After a long-term hold at a high voltage, the electrolytes extracted from each side were analyzed via high-performance liquid chromatography coupled with electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy. We compared these results with those from a coin cell made with a regular porous separator. Extra species were present in the coin cell, which were absent in both compartments of the two-compartment cell, and we identified them as cross-talk species. We propose chemical structures for such species and show that these species likely have carbon carbon double bonds and fluorinated carbons. Finally, we also confirm that the organophosphate-type species proposed by several groups previously are indeed generated at the anode.

25 ENERGY STORAGE↗

Deep Eutectic Solvents for Pretreatment of Lignocellulose Biomass: Physical Properties, Solubility Mechanisms, and Their Interactions

As the most accessible and abundant renewable resource on earth, lignocellulosic biomass mainly consists of cellulose, hemicelluloses, and lignin with a small amount of protein, pectin, minerals, and extractives (e.g., tannins, lipids, and resins). Lignocellulosic biomass has gained extensive attention in industry and research owing to its renewability, availability, and low cost. However, achieving efficient fractionation of lignocellulose components and all-component utilization in a green and cost-effective manner remains a challenge dueto biomass recalcitrance. Deep eutectic solvents (DESs) have received considerable attention because they are biocompatible, inexpensive, biodegradable, have low toxicity, and are easy to prepare and recycle; these characteristics strongly depend on individual components involved in DESs preparation. This review systematically summarizes recent progress in the fractionation of carbohydrates (cellulose and hemicelluloses) and lignin from biomass using DESs, with particular emphasis on the effects of DES types and pretreatment parameters on fractionation efficiency. The subsequent conversion and upgrading of the DES-fractionated products (i.e., carbohydrates and lignin) are comprehensively analyzed. Finally, the challenges and future prospects of lignocellulose biomass fractionation using DESs are proposed in view of the existing limitations. This review provides an in-depth understanding of lignocellulose biomass fractionation during DESs processing, offering insights to improve current pretreatment methods and/or to explore new pretreatment methods aimed at mitigating the global energy crisis.

Mqoni, Ntebogeng [North-West University (Mafikeng ↗

CO 2 -Soluble Nonionic Surfactants for Enhanced CO 2 Storage via In Situ Foam Generation

Geologic carbon storage (GCS) is a rapidly evolving technology with the potential to reduce the environmental impact of fos-sil fuels. Saline aquifers, which comprise a sandstone matrix with brine in the pores, make up much of the pore space availa-ble for CO 2 storage in the United States. When CO 2 is injected in saline aquifers, however, capillary fingering occurs and only a small percentage of the pore space is filled with CO 2 . This is due to the low viscosity of CO 2 , which is roughly ten times less viscous than brine. To address this problem, we tested the ability of inexpensive, commercially available nonionic surfactants to be dissolved in the injected CO 2 and increase the apparent viscosity of CO 2 by generating CO 2 -in-water foams in situ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermochemical Properties of a Water-Soluble Zr(IV)-Flavonolate Complex for Fluoride Sensing

Detection of fluoride in water samples is critical for monitoring many chemical, environmental, and biological processes, however, these measurements often rely on costly instrumentation. Here, this situation has motivated the design of simple to use, fieldable fluoride sensors. Previously, a fluorometric sensor based on (EDTA)­Zr­(H 2 O) 2 (EDTA = ethylenediamine-N,N,N′,N′-tetraacetate) and 3-hydroxyflavone (FlvH) was reported for fluoride detection in ethanol-H 2 O mixtures. Herein, we report the synthesis and characterization of the previously proposed Zr­(IV)-flavonolate complex as the dimethylammonium salt, [(EDTA)­Zr­(Flv)]­[NMe 2 H 2 ] (Flv = 3-hydroxyflavonolate), and detail its utility for aqueous fluoride sensing. This species exhibits an intense blue fluorescence upon excitation with near-UV light (λ ex = 390 nm; λ em = 460 nm) that is quenched in the presence of NaF (100 mM acetate buffer, pH = 5) with good sensitivity (LOD = 20.9 nM; [F – ] from 10 –8 to 10 –4 M) under neat aqueous conditions. The equilibrium constant (K eq = 1.26 ± 0.00184 × 10 8 M –2 ) and free energy (Δ$G^°_{\textrm{rxn}}$ = –11.0 kcal mol –1 ) were determined under the conditions used for fluoride sensing, indicating a highly favorable reaction with F – in water. Finally, we developed paper-based sensing strips for qualitative fluoride sensing by immobilizing the sensor in a deposited gel enabling good selectivity and reduced interference due to slower ion diffusion.

aqueous chemistry↗

Uranyl Peroxide Cage Cluster Solubility in Water and the Role of the Electrical Double Layer

Uranium concentrations as high as 2.94 × 10 5 parts per million (1.82 mol of U/1 kg of H 2 O) occur in water containing nanoscale uranyl cage clusters. The anionic cage clusters, with diameters of 1.5–2.5 nm, are charge-balanced by encapsulated cations, as well as cations within their electrical double layer in solution. The concentration of uranium in these systems is impacted by the countercations (K, Li, Na), and molecular dynamics simulations have predicted their distributions in selected cases. Finally, formation of uranyl cages prevents hydrolysis reactions that would result in formation of insoluble uranyl solids under alkaline conditions, and these spherical clusters reach concentrations that require close packing in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transformation of Uranyl Peroxide Studtite, [(UO 2 )(O 2 )(H 2 O) 2 ](H 2 O) 2 , to Soluble Nanoscale Cage Clusters

The dissolution behavior of uranyl peroxide studtite, [(UO 2 )(O 2 )(H 2 O) 2 ](H 2 O) 2 , was examined under a wide range of alkaline aqueous environments with and without the addition of hydrogen peroxide. In the absence of added H 2 O 2 , studtite dissolved in aqueous solutions with a tetraethylammonium hydroxide to uranium molar ratio greater than 0.5, and the resulting species in solution characterized by Raman spectroscopy and electrospray ionization mass spectrometry (ESI-MS) is the uranyl peroxide nanocluster U 24 , [(UO 2 )(O 2 )(OH)] 24 24– . This is the first demonstration of the formation of uranyl peroxide nanoclusters from studtite in a solution lacking additional hydrogen peroxide. In similar systems containing added hydrogen peroxide (0.01 M – 1.0 M), studtite dissolved in solutions with a TEAOH to uranium ratio greater than 0.1, and the resulting uranyl peroxide species in solution was U 28 , [(UO 2 )(O 2 ) 1.5 ] 28 28– .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗