Search NASA⌕ Search

SEARCH · Search NASA

Results for “ceramic processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Development of Processing Techniques for Advanced Thermal Protection Materials

Thermal Protection Materials Branch (TPMB) has been involved in various research programs to improve the properties and structural integrity of the existing aerospace high temperature materials. Specimens from various research programs were brought into the analytical laboratory for the purpose of obtaining and refining the material characterization. The analytical laboratory in TPMB has many different instruments which were utilized to determine the physical and chemical characteristics of materials. Some of the instruments that were utilized by the SJSU students are: Scanning Electron Microscopy (SEM), Energy Dispersive X-ray analysis (EDX), X-ray Diffraction Spectrometer (XRD), Fourier Transform-Infrared Spectroscopy (FTIR), Ultra Violet Spectroscopy/Visible Spectroscopy (UV/VIS), Particle Size Analyzer (PSA), and Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). The above mentioned analytical instruments were utilized in the material characterization process of the specimens from research programs such as: aerogel ceramics (I) and (II), X-33 Blankets, ARC-Jet specimens, QUICFIX specimens and gas permeability of lightweight ceramic ablators. In addition to analytical instruments in the analytical laboratory at TPMB, there are several on-going experiments. One particular experiment allows the measurement of permeability of ceramic ablators. From these measurements, physical characteristics of the ceramic ablators can be derived.

Selvaduray, Guna↗

Coated Feedstock for Fabrication of Ceramic Parts by CAM-LEM

In laminated object manufacturing of ceramic components, lamination is one of the most important materials issues. Good lamination ensures monolithic component after firing. Otherwise, lamination defects that inevitably will occur in the parts will affect the properties of ceramic components. Adhesive (both liquid and non-liquid) lamination processes were developed for the cut-then-stack (CAM-LEM) procedure. The non-liquid adhesive lamination is discussed in detail.

Liu, Zhien↗

Process to produce silicon carbide fibers using a controlled concentration of boron oxide vapor

A process for producing polycrystalline silicon carbide includes heating an amorphous ceramic fiber that contains silicon and carbon in an environment containing boron oxide vapor. The boron oxide vapor is produced in situ by the reaction of a boron containing material such as boron carbide and an oxidizing agent such as carbon dioxide, and the amount of boron oxide vapor can be controlled by varying the amount and rate of addition of the oxidizing agent.

Barnard, Thomas Duncan↗

Process to produce silicon carbide fibers using a controlled concentration of boron oxide vapor

A process for producing polycrystalline silicon carbide by heating an amorphous ceramic fiber that contains silicon and carbon in an environment containing boron oxide vapor. The boron oxide vapor is produced in situ by the reaction of a boron containing material such as boron carbide and an oxidizing agent such as carbon dioxide, and the amount of boron oxide vapor can be controlled by varying the amount and rate of addition of the oxidizing agent.

Barnard, Thomas Duncan↗

Challenges and New Trends for Piezoelectric Actuators

BiScO3-PbTiO3 ceramics with TC greater than 400 C has been successfully processed. Despite the increase in TC, excess Pb addition increases both the bulk conductivity and the grain boundary contribution to conductivity at elevated temperatures. Conductivity at elevated temperatures, that limits the operating temperature for actuators, has been greatly reduced by excess Bi additions. Excess Bi doping improves poling conditions resulting in enhanced piezoelectric coefficient (d(sub 33) = 408 pC/N).

Sehirlioglu, Alp↗

Developing Materials and Coating Technologies for Mitigation of Lunar Dust Adhesion and Abrasion

In order to support long duration missions on the Moon’s surface, materials resistant to the harsh lunar environment are critically needed. Lunar dust poses a major threat to the durability of components and vehicles due to its fine, jagged morphology and highly abrasive nature, which enables the particles to adhere and embed into surfaces of components and devices potentially leading to premature failure. Consequently, significant effort within NASA aims to develop novel materials and coating technologies to limit lunar dust adhesion and abrasion by exploring a variety of production routes and examining properties of candidate material systems, including ceramic, metallic and polymeric. Manufacturing methods investigated include traditional powder processing, additive manufacturing and surface modification via laser ablation patterning of bulk materials and coatings. An overview of ongoing NASA materials and coating research and development to enable lunar exploration will be presented.

Materials↗

Effects of porosity on dielectric and piezoelectric properties of porous lead zirconate titanate ceramics

We report porous lead zirconate titanate ceramics fabricated by tert-butyl alcohol-based gel-casting process which show a very high thickness electromechanical coupling coefficient (0.77), high hydrostatic figure of merit (9594x10{sup -15} m{sup 2}/N), and low acoustic impedance (3.7 Mrayls). We show that the porosity effectively affects the performance of the samples in two ways: (1) a higher porosity simplifies the resonance behavior, leading to more efficient energy transduction; (2) its replacement of active ceramic phase leads to low relative permittivity, high hydrostatic figure of merit, and low acoustic impedance. It was confirmed the properties could be tailored by controlling the porosity.

36 MATERIALS SCIENCE↗

The down-conversion and up-conversion photoluminescence properties of Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}:Yb{sup 3+}/Pr{sup 3+} ceramics

Na{sub 0.5}Bi{sub 0.5−x−y}Yb{sub x}Pr{sub y}TiO{sub 3} (NBT:xYb/yPr) ceramics with different Yb and Pr contents are prepared. Both the down-conversion (DC) and up-conversion (UC) photoluminescence (PL) of the ceramics via 453 and 980 nm excitation, respectively, are investigated. The effect of Yb{sup 3+} and Pr{sup 3+} doping contents on the DC and UC PL is significantly different from each other. Furthermore, the UC PL of the ceramics as a function of temperatures is measured to investigate the UC process in detail. Based on energy level diagram of Pr{sup 3+} and Yb{sup 3+} ions and the DC and UC PL spectra, the DC and UC PL mechanisms of Pr{sup 3+} and Yb{sup 3+} ions are discussed. Especially, the UC PL mechanism is clarified, which is different from the previously reported literature. Also, the temperature sensing properties of the ceramics are studied based on the photoluminescence ratio technique, using the thermal coupling energy levels of Pr{sup 3+}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fuel Cell Tech Team Meeting: Engineered Nano-scale Ceramic Supports for PEM Fuel Cells [Slides]

Catalyst support durability is currently a technical barrier for commercialization of polymer electrolyte membrane (PEM) fuel cells, especially for transportation applications. Degradation and corrosion of the conventional carbon supports leads to losses in active catalyst surface area and, consequently, reduced performance. As a result, the goal of this work is to develop support materials that interact strongly with Pt, yet sustain bulk-like catalytic activities with very highly dispersed particles. Ceramic materials that are prepared using conventional solid-state methods have large grain sizes and low surface areas that can only be minimally ameliorated through grinding and ball milling. Other synthesis routes to produce ceramic materials must be investigated and utilized in order to obtain desired surface areas. In this work, several different synthesis methods are being utilized to prepare electronically conductive ceramic boride, nitride, and oxide materials with high surface areas and have the potential for use as PEMFC catalyst supports. Polymer-assisted deposition (PAD) and aerosol-through plasma (A-T-P) torch are among several methods used to obtain ceramic materials with surface areas that are equal to, or exceed Vulcan XC-72R supports. Cubic Mo-based ceramic phases have been prepared with average XRD-determined crystallite sizes as low as 1.6 nm (from full profile, XRD fitting) and a BET surface area exceeding 200 m 2 /g. Additionally, black, sub-stoichiometric TiO 2-x , have been prepared with an average crystallite size in the 4 nm range and surface areas exceeding 250 m 2 /gr. Pt disposition using an incipient wetness approach produced materials with activity for hydrogen redox reactions and ORR. Cyclic voltammetry data will be shown for a variety of potential Pt/ceramic catalysts. Initial experiments indicate enhanced Pt metal-support interactions as well. Plane wave periodic density functional calculations (VASP) are being used to predict the thermodynamic and activation barriers for fundamental electrode processes occurring at platinum surfaces supported on thin films of the ceramic support materials. The results of this work will be used in order to optimize support properties.

08 HYDROGEN↗

Corrosion resistance characterization of porous alumina membrane supports

Tubular porous alumina ceramic membrane supports were fabricated by an extrusion-drying-sintering process and then characterized in detail in terms of corrosion resistance in both H{sub 2}SO{sub 4} and NaOH aqueous solutions. Variations in the properties of the alumina supports such as mass loss percent, mechanical strength, open porosity and pore size distribution were studied before and after corrosion under different conditions. In addition, the microstructures were analyzed using scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction before and after corrosion. The fabricated porous alumina supports offer possibilities for some potential applications as micro-filtration or ultra-filtration membrane supports, as well as in the pre-treatment of strongly acidic industrial waste-liquids. - Research highlights: {yields} Porous alumina membrane supports fabricated by extrusion-drying-sintering process. {yields} Corrosion resistance in 20 wt.% H{sub 2}SO{sub 4} and 1, 5, 10 wt.% NaOH aqueous solutions. {yields} Rapid mass loss and loss of flexural strength occurred in hot NaOH solution. {yields} Resistant to strong acid corrosion with low mass loss, low flexural strength loss. {yields} Porous alumina supports have potential for treatment of strong acid waste liquids.

36 MATERIALS SCIENCE↗

Phase evolution during reactive flash sintering of Li 6.25 Al 0.25 La 3 Zr 2 O 12 starting from a chemically prepared powder

Here, reactive flash sintering (RFS) of a chemically prepared multiphase precursor powder was performed to fabricate Li 6.25 Al 0.25 La 3 Zr 2 O 12 (Al-LLZO) ceramics. This approach allowed for obtaining single-phase dense samples in a remarkably short processing time of 30 s, at a furnace temperature of 600 °C, with an electric field of 50 V cm -1 and a current limit of 150 mA mm -2 . The ceramics display high bulk conductivity of 0.18 mS cm -1 at room temperature. Furthermore, phase evolution is studied by in-situ X-ray diffraction during: i) conventional heating and ii) RFS under current rate mode. As expected, the intermediate phases progressively dissolved into the Al-LLZO matrix by conventional heating. On the other hand, RFS promoted the growth of the intermediate La 2 Zr 2 O 7 , an effect that was overcome by the thermally driven formation of Al-LLZO at higher temperatures. The observed different reaction pathway suggests that RFS can be used for stabilizing phases that are not thermodynamically favored upon conventional heating.

36 MATERIALS SCIENCE↗

Highly reflective polymeric substrates functionalized utilizing atomic layer deposition

Reflective surfaces are one of the key elements of solar plants to concentrate energy in the receivers of solar thermal electricity plants. Polymeric substrates are being considered as an alternative to the widely used glass mirrors due to their intrinsic and processing advantages, but optimizing both the reflectance and the physical stability of polymeric mirrors still poses technological difficulties. In this work, polymeric surfaces have been functionalized with ceramic thin-films by atomic layer deposition. The characterization and optimization of the parameters involved in the process resulted in surfaces with a reflection index of 97%, turning polymers into a real alternative to glass substrates. The solution we present here can be easily applied in further technological areas where seemingly incompatible combinations of polymeric substrates and ceramic coatings occur.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel cost controlled materials and processing for primary structures

Textile laminates, developed a number of years ago, have recently been shown to be applicable to primary aircraft structures for both small and large components. Such structures have the potential to reduce acquisition costs but require advanced automated processing to keep costs controlled while verifying product reliability and assuring structural integrity, durability and affordable life-cycle costs. Recently, resin systems and graphite-reinforced woven shapes have been developed that have the potential for improved RTM processes for aircraft structures. Ciba-Geigy, Brochier Division has registered an RTM prepreg reinforcement called 'Injectex' that has shown effectivity for aircraft components. Other novel approaches discussed are thermotropic resins producing components by injection molding and ceramic polymers for long-duration hot structures. The potential of such materials and processing will be reviewed along with initial information/data available to date.

Dastin, S. J.↗

Sintering and characterization of SrBi{sub 2}Ta{sub 2}O{sub 9} obtained by high-pressure processing at low temperatures

High-pressure processing is a very attractive approach for the production of materials with new and/or improved properties. In this work, pressures in the order of 7.7 GPa and 2.5 GPa were induced in SrBi{sub 2}Ta{sub 2}O{sub 9} samples at different temperatures placed in a specific reaction cell and generated different effects on phase formation. The microstructural evolution during high-pressure processing was investigated by scanning electron microscopy in association with energy dispersion spectroscopy and with the support of an X-ray diffraction analyzer. Frequency response analysis was used to obtain the dielectric curves by electrochemical impedance spectroscopy. A SrBi{sub 2}Ta{sub 2}O{sub 9} single-phase sample, treated at 2.5 GPa and 900 °C, was used to evaluate the electrical properties, obtaining a dielectric response similar to SrBi{sub 2}Ta{sub 2}O{sub 9} samples sintered by conventional processes at temperatures above 1000 °C. In addition, by this method, it was possible to obtain ceramics with uniform microstructure and a relative density of 93%. - Highlights: • The first production of SrBi{sub 2}Ta{sub 2}O{sub 9} using the technique of high-pressure processing. • The ability to produce single-phase SrBi{sub 2}Ta{sub 2}O{sub 9} treated at 2.5 GPa and 900 °C. • The electrical properties are compatible with SBT sintered at high temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microgravity materials processing for commercial applications

An evaluation is made of the development status of materials processing techniques in microgravity environments; the classes of materials treated to date encompass glasses, ceramics, crystals, semiconductors, metals and their alloys, polymers, composites, and such biological substances as pharmaceuticals. Attention is given to the commercial development of composite and mixed-phase materials with substantially improved properties as a result of microgravity processing, as well as to current research into catalysts and Type II-VI semiconductor crystals such as CdTe.

Kohli, R.↗

Study on Compatibility between Silicon Carbide and Solid Breeding Materials under Neutron Irradiation

Compatibility of monolithic silicon carbide (SiC) with ternary lithium ceramics (Li{sub 1-x}AlO{sub 2-y}, Li{sub 2-x}TiO{sub 3-y}, Li{sub 2-x}ZrO{sub 3-y} and Li{sub 4-x}SiO{sub 4-y}) under irradiation of neutrons at high temperatures was studied. Disk samples of SiC in contact with sintered ternary lithium ceramics were irradiated in High Flux Isotope Reactor (HFIR) at 800 C to 5.9 displacements per atom (dpa). Chemical reactions of SiC as determined by appearance of the surface were relatively less significant for the systems of SiC/Li{sub 1-x}AlO{sub 2-y} and SiC/Li{sub 2-x}TiO{sub 3-y}, whereas some bonding likely due to chemical reaction between SiC and the lithium ceramics and broken samples were observed in the systems of SiC/Li{sub 2-x}ZrO{sub 3-y} and SiC/Li{sub 4-x}SiO{sub 4-y}. The effect of lithium burnup due to the (n, {alpha}) nuclear reaction was also examined by using samples of lithium ceramics whose lithium ratio was hypo-stoichiometric in the fabrication process. More reaction products were observed on the surface of {beta}-SiC in contact with Li{sub 1-x}AlO{sub 2-y} having the lower lithium ratio (Li/Al). It was considered that the formation of LiAl{sub 5}O{sub 8} phase due to lithium loss could deteriorate the compatibility of the SiC - Li{sub 1-x}AlO{sub 2-y} system.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Influence of Processing Parameters on the Mechanical Properties of 3D Printed Borosilicate Particulate Reinforced Polymer Composites

Emerging composite materials are expanding the potential of additive manufacturing and enabling applications previously restricted by traditional manufacturing methods. The multi-phase nature of these composite materials combined with the complex in-ternal geometry of additively manufactured parts have enabled unique behavior, and potentially new applications. Additionally, these materials can be pyrolyzed to create dense metal, ceramic, and glass parts with geometries typically not achievable by tra-ditional processes. Additive manufacturing of borosilicate glass-based systems can open new applications in nuclear engineering, astronomy, and bone regrowth therapy. To elucidate the process-parameter relationship of borosilicate-polylactic acid (PLA) composites, mechanical testing was conducted and compared with a pure polylactic acid polymer baseline. Test specimens were fabricated by fused-filament fabrication with minimal post-processing. Yield strength, ultimate strength, and elastic modulus were calculated from stress-strain curves. Optical and scanning electron microscopy were conducted to observe the specimen microstructure before and after testing. The highest compressive yield strength for the composite was 28.22 MPa, and the highest compressive yield strength for PLA was 49.30 MPa. Print orientation was found to benefit the composite material but have a detrimental effect on the pure matrix material. An elastic modulus of 2.66 GPa was recorded for the borosilicate-PLA composite at 100% infill, 1 shell wall, and layer lines parallel to compression axis. Microscopy revealed that lower modulus composite specimens had the particulates re-distributed within the matrix. Tensile testing was done according to a polymer testing standard, which caused difficulties obtaining consistent fracture within the gauge length.

mechanical testing↗

Dense and half-dense NiZnCo ferrite ceramics: Their respective relevance for antenna downsizing, according to their dielectric and magnetic properties at microwave frequencies

Spinel ferrite Ni{sub 0.5}Zn{sub 0.3}Co{sub 0.2}Fe{sub 1.98}O{sub 4−x} nanoparticles were synthesized by co-precipitation method, and samples were realized by moulding and annealing at key temperatures (T{sub M} = 800 °C, 900 °C, 1050 °C, determined beforehand through shrinkage measurements) going with calcining and sintering processes. Annealing at 800 °C and 900 °C led to half-dense ceramics (porosity ∼50 vol. %), whereas bulky ferrite was obtained after annealing at 1050 °C. Elemental analysis, X-ray diffraction and ion chromatography analysis were performed. Complex dielectric permittivity (ε*) and magnetic permeability (μ*) were investigated up to 6 GHz. With increasing T{sub M}, a decreasing amount of Fe{sup 2+} was observed, going with increasing sample density. Coupled effects of the Fe{sup 2+} concentration and of the porosity, both on dielectric and magnetic properties, were chiefly investigated and discussed. The materials show almost constant permittivities (ε′ = 5.0, 6.0, and 14.8 for T{sub M} = 800 °C, 900 °C and 1050 °C, respectively). The bulk value at f = 1 GHz (ε′ = 14.8) can be interpreted well according to Shannon's theory. The permittivities of the half-dense ceramics are discussed on the basis of Bruggeman's Effective Medium Theory. The materials annealed at 800 °C and 900 °C show almost constant magnetic permeabilities in the frequency range from 0.2 to 1 GHz (μ′ = 3.4 and 6.0 for T{sub M} = 800 °C and 900 °C). The observed permeability behavior is typical of monodomain particles, except for the sample annealed at 1050 °C, for which domain wall contribution to μ* is suspected because of non-negligible losses at low frequency (μ″ = 1.3–1.8 at f < 0.3 GHz). This finding is supported by estimations of the upper and lower values for the critical grain size, on the basis of Brown–Van der Zaag's theory. Facing bulk ceramics, and in view of using Ni{sub 0.5}Zn{sub 0.3}Co{sub 0.2}Fe{sub 1.98}O{sub 4−x} ferrite as substrate for antenna miniaturization, the electromagnetic properties of half-dense ceramics materials seem to be very competitive at frequencies beyond 0.2 GHz, and up to 0.7–0.8 GHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗