Search NASA⌕ Search

SEARCH · Search NASA

Results for “consistent scheme”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Multiple ordering in magnetite.

Results of a self-consistent band calculation of the ground-state energy and charge orderings based on a tight-binding scheme in magnetite are presented. They show that below a critical (about 2.2) value of the ratio of interatomic Coulomb energy to bandwidth the lowest energy state has no order. Between this critical value and 2.5, the preferred state is multiply ordered.

Cullen, J. R.↗

Numerical advection algorithms and their role in atmospheric transport and chemistry models

During the last 35 years, well over 100 algorithms for modeling advection processes have been described and tested. This review summarizes the development and improvements that have taken place. The nature of the errors caused by numerical approximation to the advection equation are highlighted. Then the particular devices that have been proposed to remedy these errors are discussed. The extensive literature comparing transport algorithms is reviewed. Although there is no clear cut 'best' algorithm, several conclusions can be made. Spectral and pseudospectral techniques consistently provide the highest degree of accuracy, but expense and difficulties assuring positive mixing ratios are serious drawbacks. Schemes which consider fluid slabs bounded by grid points (volume schemes), rather than the simple specification of constituent values at the grid points, provide accurate positive definite results.

Rood, Richard B.↗

An evaluation of the role of eddy diffusion in stratospheric interactive two-dimensional models

An interactive two-dimensional model of the stratosphere, consisting of a primitive equation dynamics module, a simplified HO(x) ozone model, and a full radiative transfer scheme, is used to study the effect of eddy diffusion in the model. Consideration is given to the effects of nonlocal forcing from dissipation in the model troposphere and frictional drag at mesospheric levels, mechanical damping in the stratosphere itself, and potential vorticity flux due to large scale waves. It is found that the ozone distributions generated with the model are very sensitive to the choice of values for the friction and the eddy diffusion coefficients. It is shown that reasonable latitudinal gradients of ozone may be obtained by using small values for the mechanical damping for the mid- and high-latitude stratopsphere.

Schneider, Hans R.↗

A cache-aided multiprocessor rollback recovery scheme

This paper demonstrates how previous uniprocessor cache-aided recovery schemes can be applied to multiprocessor architectures, for recovering from transient processor failures, utilizing private caches and a global shared memory. As with cache-aided uniprocessor recovery, the multiprocessor cache-aided recovery scheme of this paper can be easily integrated into standard bus-based snoopy cache coherence protocols. A consistent shared memory state is maintained without the necessity of global check-pointing.

Wu, Kun-Lung↗

NASA Uniform Files Index

This handbook is a guide for the use of all personnel engaged in handling NASA files. It is issued in accordance with the regulations of the National Archives and Records Administration, in the Code of Federal Regulations Title 36, Part 1224, Files Management; and the Federal Information Resources Management Regulation, Subpart 201-45.108, Files Management. It is intended to provide a standardized classification and filing scheme to achieve maximum uniformity and ease in maintaining and using agency records. It is a framework for consistent organization of information in an arrangement that will be useful to current and future researchers. The NASA Uniform Files Index coding structure is composed of the subject classification table used for NASA management directives and the subject groups in the NASA scientific and technical information system. It is designed to correlate files throughout NASA and it is anticipated that it may be useful with automated filing systems. It is expected that in the conversion of current files to this arrangement it will be necessary to add tertiary subjects and make further subdivisions under the existing categories. Established primary and secondary subject categories may not be changed arbitrarily. Proposals for additional subject categories of NASA-wide applicability, and suggestions for improvement in this handbook, should be addressed to the Records Program Manager at the pertinent installation who will forward it to the NASA Records Management Office, Code NTR, for approval. This handbook is issued in loose-leaf form and will be revised by page changes.

Source record↗

Modeling Electric Field Influences on Plasmaspheric Refilling

We have a new model of ion transport that we have applied to the problem of plasmaspheric flux tube refilling after a geomagnetic disturbance. This model solves the Fokker-Planck kinetic equation by applying discrete difference numerical schemes to the various operators. Features of the model include a time-varying ionospheric source, self-consistent Coulomb collisions, field-aligned electric field, hot plasma interactions, and ion cyclotron wave heating. We see refilling rates similar to those of earlier observations and models, except when the electric field is included. In this case, the refilling rates can be quite different that previously predicted. Depending on the populations included and the values of relevant parameters, trap zone densities can increase or decrease. In particular, the inclusion of hot populations near the equatorial region (specifically warm pancake distributions and ring current ions) can dramatically alter the refilling rate. Results are compared with observations as well as previous hydrodynamic and kinetic particle model simulations.

Liemohn, M. W.↗

Free-Flying Magnetometer Data System

The Free-Flying Magnetometer (FFM) is an autonomous "sensorcraft" developed at the Jet Propulsion Laboratory (JPL) for the Enstrophy sounding rocket mission. This mission was a collaborative project between the University of New Hampshire, Cornell University and JPL. The science goal of the mission was the study of current filamentation phenomena in the northern auroral region through multipoint measurements of magnetic field. The technical objective of the mission was the proof of concept of the JPL FFM design and the demonstration of an in-situ multipoint measurement technique employing many free-flying spacecraft. Four FFMs were successfully deployed from a sounding rocket launched from Poker Flats, Alaska on February 11, 1999. These hockey-puck-sized (80 mm diameter, 38 mm. height, 250 gram mass) free flyers each carry a miniature 3-axis flux-gate magnetometer that output +/- 2 V signals corresponding to a +/- 60,000 nT measurement range for each axis. The FFM uses a synchronized four-channel Sigma(Delta) Analog-to-Digital Converter (ADC) having a dynamic range of +/- 2.5V and converting at a rate of 279 samples/second/channel. Three channels are used to digitize the magnetometer signals to 17-bit (1.144 nT/bit) resolution. The fourth ADC channel is multiplexed for system monitoring of four temperature sensors and two battery voltages. The FFM also contains two sun sensors, a laser diode which emits a fan-shaped beam, a miniature S-band transmitter for direct communication to the ground station antennas, an ultra-stable Temperature Compensated Crystal Oscillator (TCXO) clock, an integrated data subsystem implemented in a Field-Programmable Gate Array (FPGA), a 4 Mbit Static Random Access Memory (SRAM) for data storage and Lithium Thionyl Chloride batteries for power. Communicating commands to the FFM prior to deployment is achieved with an infrared (IR) link. The FFM IR receiver responds to 9-bit pulse coded signals that are generated by an IR Light Emitting Diode (LED) in the payload for turning FFM power on or off and placing the FFM in a test mode or flight mode. The IR links are also used to synchronize (zero) the clocks onboard all the FFMs through a reset pulse originating from the payload GPS receiver that is issued when the FFMs are in flight mode. The FPGA based data subsystem manages continuous data collection from the four ADC channels and sun sensors, formatting and storing the data to SRAM, and controlling downlink transmission. The transmitter is powered only after a 2547 frame SRAM buffer has been filled (approx. 5 minutes of data). The data is Viterbi encoded and sent to the S-band transmitter via a First-In-First-Out (FIFO) buffer who's output is clocked at 100 bits/second. After the 26-second transmission, the transmitter is turned off to reduce noise coupling to the sensitive magnetometer. The data subsystem control consists of a master state machine that performs data flow management and is interfaced through a prioritized interrupt scheme to state machines that service the ADC, sun sensors and transmitter FIFO. Continuous data collection prevents the missing of data during transmission and provides implicit time tagging of the data acquired by the ADC because of synchronization with the TCXO clock.

Blaes, B.↗

Influence of Finite Element Size in Residual Strength Prediction of Composite Structures

The sensitivity of failure load to the element size used in a progressive failure analysis (PFA) of carbon composite center notched laminates is evaluated. The sensitivity study employs a PFA methodology previously developed by the authors consisting of Hashin-Rotem intra-laminar fiber and matrix failure criteria and a complete stress degradation scheme for damage simulation. The approach is implemented with a user defined subroutine in the ABAQUS/Explicit finite element package. The effect of element size near the notch tips on residual strength predictions was assessed for a brittle failure mode with a parametric study that included three laminates of varying material system, thickness and stacking sequence. The study resulted in the selection of an element size of 0.09 in. X 0.09 in., which was later used for predicting crack paths and failure loads in sandwich panels and monolithic laminated panels. Comparison of predicted crack paths and failure loads for these panels agreed well with experimental observations. Additionally, the element size vs. normalized failure load relationship, determined in the parametric study, was used to evaluate strength-scaling factors for three different element sizes. The failure loads predicted with all three element sizes provided converged failure loads with respect to that corresponding with the 0.09 in. X 0.09 in. element size. Though preliminary in nature, the strength-scaling concept has the potential to greatly reduce the computational time required for PFA and can enable the analysis of large scale structural components where failure is dominated by fiber failure in tension.

Satyanarayana, Arunkumar↗

Consensus-Based Formation Control of a Class of Multi-Agent Systems

This paper presents a consensus-based formation control scheme for autonomous multi-agent systems represented by double integrator dynamics. Assuming that the information graph topology consists of an undirected connected graph, a leader-based consensus-type control law is presented and shown to provide asymptotic formation stability when subjected to piecewise constant formation velocity commands. It is also shown that global asymptotic stability is preserved in the presence of (0, infinity)- sector monotonic non-decreasing actuator nonlinearities.

Joshi, Suresh↗

Improving Bulk Microphysics Parameterizations in Simulations of Aerosol Effects

To improve the microphysical parameterizations for simulations of the aerosol indirect effect (AIE) in regional and global climate models, a double-moment bulk microphysical scheme presently implemented in the Weather Research and Forecasting (WRF) model is modified and the results are compared against atmospheric observations and simulations produced by a spectral bin microphysical scheme (SBM). Rather than using prescribed aerosols as in the original bulk scheme (Bulk-OR), a prognostic doublemoment aerosol representation is introduced to predict both the aerosol number concentration and mass mixing ratio (Bulk-2M). The impacts of the parameterizations of diffusional growth and autoconversion and the selection of the embryonic raindrop radius on the performance of the bulk microphysical scheme are also evaluated. Sensitivity modeling experiments are performed for two distinct cloud regimes, maritime warm stratocumulus clouds (SC) over southeast Pacific Ocean from the VOCALS project and continental deep convective clouds (DCC) in the southeast of China from the Department of Energy/ARM Mobile Facility (DOE/AMF) - China field campaign. The results from Bulk-2M exhibit a much better agreement in the cloud number concentration and effective droplet radius in both the SC and DCC cases with those from SBM and field measurements than those from Bulk-OR. In the SC case particularly, Bulk-2M reproduces the observed drizzle precipitation, which is largely inhibited in Bulk-OR. Bulk-2M predicts enhanced precipitation and invigorated convection with increased aerosol loading in the DCC case, consistent with the SBM simulation, while Bulk-OR predicts the opposite behaviors. Sensitivity experiments using four different types of autoconversion schemes reveal that the autoconversion parameterization is crucial in determining the raindrop number, mass concentration, and drizzle formation for warm 2 stratocumulus clouds. An embryonic raindrop size of 40 μm is determined as a more realistic setting in the autoconversion parameterization. The saturation adjustment employed in calculating condensation/evaporation in the bulk scheme is identified as the main factor responsible for the large discrepancies in predicting cloud water in the SC case, suggesting that an explicit calculation of diffusion growth with predicted supersaturation is necessary for further improvements of the bulk microphysics scheme. Lastly, a larger rain evaporation rate below cloud is found in the bulk scheme in comparison to the SBM simulation, which could contribute to a lower surface precipitation in the bulk scheme.

aerosol↗

Texture simulation of a severely cold rolled low carbon steel using polycrystal modeling

Characteristic textures of cold-rolled low carbon steel consist of the RD//$\langle$110$\rangle$ fiber (α fiber) and ND//$\langle$111$\rangle$ fiber (γ fiber). Although the development of the γ fiber has been successfully modeled by the relaxed constraints polycrystal plasticity model, modeling of the α fiber has been less successful. Here, we investigate mechanisms underlying the development of a strong α fiber in a low carbon steel during cold rolling to large thickness reductions of 90%, 98%, and 99.8%. We compare the deformation textures measured using X-ray and electron backscatter diffraction methods with those simulated using polycrystal models, employing one of four homogenization schemes: the Taylor model, Secant model, Tangent model and an intermediate stiffness model between the Secant and Tangent models. The measured textures consist of an extremely strong α fiber and unusually weak γ fiber. The calculated textures achieve the best agreement with the measured ones when (1) the intermediate stiffness model is used to account for grain shape effects, (2) the flow rule exponent (n) is chosen to allow for multiple slip in grains, (3) latent hardening effects are suppressed, (4) $\langle$111$\rangle$ slip on {110}, {112} and {123} planes is made available for deformation, and (5) the grains shape is permitted to evolve individually. Taken together, these aspects represent indirectly the effects of cross slip on slip activity, suggesting that the strong α fiber in severely cold rolled steel results from cross slip. Although the cross slip is a well accepted mechanism in b.c.c. crystals, its connection to α fiber dominance in texture development during severe rolling deformation has not been established before.

36 MATERIALS SCIENCE↗

Quantum dot polarisation converter in an optomechanical cavity

We propose a scheme of a quantum photon polarisation converter, which is based on controlled electron – photon – phonon transitions in a hybrid semiconductor nanostructure. This structure consists of a GaAs/InAs quantum dot (QD) that has a parallelepiped shape and contains a single electron, and an optomechanical microcavity (MC) based on a photonic crystal (PC) that supports two orthogonally polarised photonic modes and one mechanical (phonon) mode. Within the framework of the microscopic theory, the QD and MC performance characteristics are found. Populations of states of the system as functions of time and its parameters are calculated. The principal possibility of photon polarisation conversion using transitions in a five-level resonance scheme for coherent (single-photon) and steady-state (subphoton) regimes is shown. The MC optical and mechanical spectra are simulated, and the PC structure parameters are selected to ensure the efficient operation of the converter. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards Verification of Unstructured-Grid Solvers

New methodology for verification of finite-volume computational methods using unstructured grids is presented. The discretization order properties are studied in computational windows, easily constructed within a collection of grids or a single grid. Tests are performed within each window and address a combination of problem-, solution-, and discretization/grid-related features affecting discretization error convergence. The windows can be adjusted to isolate particular elements of the computational scheme, such as the interior discretization, the boundary discretization, or singularities. Studies can use traditional grid-refinement computations within a fixed window or downscaling, a recently-introduced technique in which computations are made within windows contracting toward a focal point of interest. Grids within the windows are constrained to be consistently refined, allowing a meaningful assessment of asymptotic error convergence on unstructured grids. Demonstrations of the method are shown, including a comparative accuracy assessment of commonly-used schemes on general mixed grids and the identification of local accuracy deterioration at boundary intersections. Recommendations to enable attainment of design-order discretization errors for large-scale computational simulations are given.

Thomas, James L.↗

On the design of stable, consistent, and conservative high-order methods for multi-material hydrodynamics

Obtaining stable and high-order numerical solutions for multi-material hydrodynamics is an open challenge. Although slope limiters are widely used to maintain monotonicity near discontinuities, typical limiting procedures violate closure laws at the discrete level when applied to multi-material hydrodynamics equations. Due to this, the high-order expansions of quantities related by the closure laws are no longer consistent. The commonly observed symptom of this consistency-violation is that the numerical method fails to maintain constant pressure and velocity across material interfaces. This leads to sub-optimal convergence rates for smooth multi-material problems as well. Specialized limiting procedures that satisfy consistency while maintaining conservation need to be developed for such equations. A novel procedure that re-instates consistency into slope-limited high-order discretizations applied to the multi-material hydrodynamics equations is presented here. Using simple examples, it is demonstrated that the presented method satisfies closure laws at the discrete level, while maintaining conservative properties of the high-order method. Furthermore, this procedure involves a projection step which relies on the compact basis of the underlying spatial discretization, i.e. for discontinuous schemes (viz. DG and FV) the projection is local, and does not involve global matrix solves. Comparisons with conventional approaches emphasizes the necessity of the consistent closure-law preserving limiting approach, in order to maintain design order of accuracy for smooth multi-material problems.

36 MATERIALS SCIENCE↗

Adiabatic Shock Capturing in Perfect Gas Hypersonic Flows

This paper considers the streamline-upwind Petrov/Galerkin (SUPG) method applied to the compressible Euler and Navier-Stokes equations in conservation-variable form. The spatial discretization, including a modified approach for interpolating the inviscid flux terms in the SUPG finite element formulation, is briefly reviewed. Of particular interest is the behavior of the shock capturing operator, which is required to regularize the scheme in the presence of strong, shock-induced gradients. A standard shock capturing operator which has been widely used in previous studies by several authors is presented and discussed. Specific modifications are then made to this standard operator which are designed to produce a more physically consistent discretization in the presence of strong shock waves. The actual implementation of the term in a finite dimensional approximation is also discussed. The behavior of the standard and modified scheme is then compared for several supersonic/hypersonic flows. The modified shock capturing operator is found to preserve enthalpy in the inviscid portion of the flowfield substantially better than the standard operator.

Kirk, Benjamin S.↗

A new ionospheric electron precipitation module coupled with RAM-SCB within the geospace general circulation model

Electron precipitation down to the atmosphere due to wave-particle scattering in the magnetosphere contributes significantly to the auroral ionospheric conductivity. In order to obtain the auroral conductivity in global MHD models that are incapable of capturing kinetic physics in the magnetosphere, MHD parameters are often used to estimate electron precipitation flux for the conductivity calculation. Such an MHD approach, however, lacks self-consistency in representing the magnetosphere-ionosphere coupling processes. In this study we improve the coupling processes in global models with a more physical method. We calculate the physics-based electron precipitation from the ring current and map it to the ionospheric altitude for solving the ionospheric electrodynamics. In particular, we use the BATS-R-US (Block Adaptive Tree Scheme-Roe type-Upstream) MHD model coupled with the kinetic ring current model RAM-SCB (Ring current-Atmosphere interaction Model with Self-Consistent Magnetic field (B)) that solves pitch angle-dependent electron distribution functions, to study the global circulation dynamics during the 25–26 January 2013 storm event. Since the electron precipitation loss is mostly governed by wave-particle resonant scattering in the magnetosphere, we further investigate two loss methods of specifying electron precipitation loss associated with wave-particle interactions: (1) using pitch angle diffusion coefficients D αα (E,α) determined from the quasi-linear theory, with wave spectral and plasma density obtained from statistical observations (named as “diffusion coefficient method”) and (2) using electron lifetimes τ(E) independent on pitch angles inferred from the above diffusion coefficients (named as “lifetime method”). We found that both loss methods demonstrate similar temporal evolution of the trapped ring current electrons, indicating that the impact of using different kinds of loss rates is small on the trapped electron population. Furthermore, for the precipitated electrons, the lifetime method hardly captures any precipitation in the large L shell (i.e., 4 < L < 6.5) region, while the diffusion coefficient method produces much better agreement with NOAA/POES measurements, including the spatial distribution and temporal evolution of electron precipitation in the region from the premidnight through the dawn to the dayside. Further comparisons of the precipitation energy flux to DMSP observations indicates that the new physics-based precipitation approach using diffusion coefficients for the ring current electron loss can explain the diffuse electron precipitation in the dawn sector, such as the enhanced precipitation flux at auroral latitudes and flux drop near the subauroral latitudes, but the traditional MHD approach largely overestimates the precipitation flux at lower latitudes.

58 GEOSCIENCES↗

An Indirect Adaptive Control Scheme in the Presence of Actuator and Sensor Failures

The problem of controlling a system in the presence of unknown actuator and sensor faults is addressed. The system is assumed to have groups of actuators, and groups of sensors, with each group consisting of multiple redundant similar actuators or sensors. The types of actuator faults considered consist of unknown actuators stuck in unknown positions, as well as reduced actuator effectiveness. The sensor faults considered include unknown biases and outages. The approach employed for fault detection and estimation consists of a bank of Kalman filters based on multiple models, and subsequent control reconfiguration to mitigate the effect of biases caused by failed components as well as to obtain stability and satisfactory performance using the remaining actuators and sensors. Conditions for fault identifiability are presented, and the adaptive scheme is applied to an aircraft flight control example in the presence of actuator failures. Simulation results demonstrate that the method can rapidly and accurately detect faults and estimate the fault values, thus enabling safe operation and acceptable performance in spite of failures.

Sun, Joy Z.↗

The Principle of Maximum Conformality

A key problem in making precise perturbative QCD predictions is the uncertainty in determining the renormalization scale of the running coupling {alpha}{sub s}({mu}{sup 2}). It is common practice to guess a physical scale {mu} = Q which is of order of a typical momentum transfer Q in the process, and then vary the scale over a range Q/2 and 2Q. This procedure is clearly problematic since the resulting fixed-order pQCD prediction will depend on the renormalization scheme, and it can even predict negative QCD cross sections at next-to-leading-order. Other heuristic methods to set the renormalization scale, such as the 'principle of minimal sensitivity', give unphysical results for jet physics, sum physics into the running coupling not associated with renormalization, and violate the transitivity property of the renormalization group. Such scale-setting methods also give incorrect results when applied to Abelian QED. Note that the factorization scale in QCD is introduced to match nonperturbative and perturbative aspects of the parton distributions in hadrons; it is present even in conformal theory and thus is a completely separate issue from renormalization scale setting. The PMC provides a consistent method for determining the renormalization scale in pQCD. The PMC scale-fixed prediction is independent of the choice of renormalization scheme, a key requirement of renormalization group invariance. The results avoid renormalon resummation and agree with QED scale-setting in the Abelian limit. The PMC global scale can be derived efficiently at NLO from basic properties of the PQCD cross section. The elimination of the renormalization scheme ambiguity using the PMC will not only increases the precision of QCD tests, but it will also increase the sensitivity of colliders to new physics beyond the Standard Model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗