Search NASA⌕ Search

SEARCH · Search NASA

Results for “dispersion function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Diethylenetriamine-functionalized graphene oxide: Insights into ion adsorption and applications in rare earth element separation

The growing demand for critical minerals and materials requires atom- and energy-efficient, selective separations to overcome the challenges posed by the similar chemical and physical properties of the rare earth elements (REEs) and their low concentrations in unconventional domestic feedstocks. Here, in this study, we developed diethylenetriamine-functionalized graphene oxide (DETA-GO) as a membrane material for REE adsorption and separation. Synthesis conditions were optimized to maximize nitrogen incorporation while also preserving GO dispersibility for facile membrane fabrication. We investigated the mechanism of amine functionalization, the nitrogen-bonding configurations, the organization of the interlayer transport channels, and the resulting effects on ion and water transport for REE separations. Neat-GO and DETA-GO multilayer laminate membranes were fabricated by vacuum filtration onto polymer supports. To investigate the effects of amine functionalization, the membranes were characterized using scanning electron microscopy, Raman, Fourier transform infrared, and X-ray photoelectron spectroscopy, as well as grazing-incidence X-ray diffraction measurements. Ion permeation experiments with representative lanthanum (La 3+ ) and ytterbium (Yb 3+ ) solutions revealed enhanced ion adsorption and water transport through DETA-GO membranes compared to neat-GO. The strong affinity of the membranes for multivalent REEs was also validated with conductivity and inductively coupled plasma mass spectrometry measurements. Atomistic insight into the role of amine functionalization in modulating nanochannel architecture and long-term stability, optimizing adsorption sites, and regulating REE and water transport was obtained using classical molecular dynamics simulations. Collectively, our joint experimental and theoretical study demonstrates the potential of DETA-GO membranes for selective REE separations, offering insights into ion-binding mechanisms, water-transport properties, and nanochannel optimization for the recovery of critical materials from aqueous feedstocks.

Adsorbent↗

Molecular-Level Insights into the NMR Relaxivity of Gadobutrol Using Quantum and Classical Molecular Simulations

MRI is an indispensable diagnostic tool in modern medicine; however, understanding the molecular-level processes governing NMR relaxation of water in the presence of MRI contrast agents remains a challenge, hindering the molecular-guided development of more effective contrast agents. By using quantum-based polarizable force fields, the first-of-its-kind molecular dynamics (MD) simulations of Gadobutrol are reported where the 1 H NMR longitudinal relaxivity r 1 of the aqueous phase is determined without any adjustable parameters. The MD simulations of r 1 dispersion (i.e., frequency dependence) show good agreement with measurements at frequencies of interest in clinical MRI. Importantly, the simulations reveal key insights into the molecular level processes leading to r 1 dispersion by decomposing the NMR dipole–dipole autocorrelation function G(t) into a discrete set of molecular modes, analogous to the eigenmodes of a quantum harmonic oscillator. The molecular modes reveal important aspects of the underlying mechanisms governing r 1 , such as its multiexponential nature and the importance of the second eigenmodal decay. By simply analyzing the MD trajectories on a parameter-free approach, the Gadobutrol simulations show that the outer-shell water contributes ∼50% of the total relaxivity r 1 compared to the inner-shell water, in contrast to simulations of (nonchelated) gadolinium-aqua where the outer shell contributes only ∼15% of r 1 . The deviation between simulations and measurements of r 1 below clinical MRI frequencies is used to determine the low-frequency electron-spin relaxation time for Gadobutrol, in good agreement with independent studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High tunability of the work function of (001) surface of ReO{sub 3} with O-vacancies: First principles analysis

Physical and chemical properties of transition metal oxides are central to the emerging field of oxide electronics. However, they are greatly influenced by defects, particularly, oxygen vacancies, which are always present in oxides. Here, we show how the control of oxygen vacancies at (001) surface of ReO{sub 3} can be used to tune its work function from 7 to 3 eV, based on first-principles density functional theoretical calculations of its structure, electronic and magnetic properties. The work function is shown to correlate directly with the stability of surface and exhibit a linear dependence on surface energy. We further assess the stability of ReO{sub 3} surface by determining its phonon dispersion, and explain how the surface stresses effectively strengthen structural instability leading to size dependence of its pressure dependent structural phase transitions observed experimentally. Our results highlight how significantly oxygen vacancies alter the work function of a metallic oxide and has important consequences to development of electronic devices and catalysts based on oxide heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE TURBULENCE SPECTRUM OF MOLECULAR CLOUDS IN THE GALACTIC RING SURVEY: A DENSITY-DEPENDENT PRINCIPAL COMPONENT ANALYSIS CALIBRATION

Turbulence plays a major role in the formation and evolution of molecular clouds. Observationally, turbulent velocities are convolved with the density of an observed region. To correct for this convolution, we investigate the relation between the turbulence spectrum of model clouds, and the statistics of their synthetic observations obtained from principal component analysis (PCA). We apply PCA to spectral maps generated from simulated density and velocity fields, obtained from hydrodynamic simulations of supersonic turbulence, and from fractional Brownian motion (fBm) fields with varying velocity, density spectra, and density dispersion. We examine the dependence of the slope of the PCA pseudo-structure function, {alpha}{sub PCA}, on intermittency, on the turbulence velocity ({beta}{sub v}) and density ({beta}{sub n}) spectral indexes, and on density dispersion. We find that PCA is insensitive to {beta}{sub n} and to the log-density dispersion {sigma}{sub s}, provided {sigma}{sub s} {<=} 2. For {sigma}{sub s} > 2, {alpha}{sub PCA} increases with {sigma}{sub s} due to the intermittent sampling of the velocity field by the density field. The PCA calibration also depends on intermittency. We derive a PCA calibration based on fBm structures with {sigma}{sub s} {<=} 2 and apply it to 367 {sup 13}CO spectral maps of molecular clouds in the Galactic Ring Survey. The average slope of the PCA structure function, ({alpha}{sub PCA}) = 0.62 {+-} 0.2, is consistent with the hydrodynamic simulations and leads to a turbulence velocity exponent of ({beta}{sub v}) = 2.06 {+-} 0.6 for a non-intermittent, low density dispersion flow. Accounting for intermittency and density dispersion, the coincidence between the PCA slope of the GRS clouds and the hydrodynamic simulations suggests {beta}{sub v} {approx_equal} 1.9, consistent with both Burgers and compressible intermittent turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗

The effect of thermomechanical treatment regimes on microstructure and mechanical properties of V–Me(Cr, W)–Zr–C alloys

The regularities of the formation of a heterophase structure in dispersion-strengthened vanadium V–Me(Cr, W)–Zr–C alloys are studied as a function of the regimes of their thermomechanical treatment. The regimes of treatment providing a substantial increase in the dispersity and homogeneity of spatial distribution of ZrC particles, temperature of recrystallization, and high-temperature (at T = 800°C) short-time strength are found in comparison to conventional treatment regimes.

36 MATERIALS SCIENCE↗

Properties of the water to boron nitride interaction: From zero to two dimensions with benchmark accuracy

Molecular adsorption on surfaces plays an important part in catalysis, corrosion, desalination, and various other processes that are relevant to industry and in nature. As a complement to experiments, accurate adsorption energies can be obtained using various sophisticated electronic structure methods that can now be applied to periodic systems. The adsorption energy of water on boron nitride substrates, going from zero to 2-dimensional periodicity, is particularly interesting as it calls for an accurate treatment of polarizable electrostatics and dispersion interactions, as well as posing a practical challenge to experiments and electronic structure methods. Here, we present reference adsorption energies, static polarizabilities, and dynamic polarizabilities, for water on BN substrates of varying size and dimension. Adsorption energies are computed with coupled cluster theory, fixed-node quantum Monte Carlo (FNQMC), the random phase approximation, and second order Møller-Plesset theory. These wavefunction based correlated methods are found to agree in molecular as well as periodic systems. The best estimate of the water/h-BN adsorption energy is -107 ± 7 meV from FNQMC. In addition, the water adsorption energy on the BN substrates could be expected to grow monotonically with the size of the substrate due to increased dispersion interactions, but interestingly, this is not the case here. This peculiar finding is explained using the static polarizabilities and molecular dispersion coefficients of the systems, as computed from time-dependent density functional theory (DFT). Dynamic as well as static polarizabilities are found to be highly anisotropic in these systems. Finally, the many-body dispersion method in DFT emerges as a particularly useful estimation of finite size effects for other expensive, many-body wavefunction based methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effective Velocity of the Domain Wall Motion in the Quasi-One-Dimensional Nanosystem at a Multiple Nucleation of Domains of the New Phase

The process of switching a metastable state into an energetically preferable state in extended quasione- dimensional systems often occurs through the motion of domains walls of new phase. Usually considered limit cases are the propagation of the edge domains over the whole system or multiple nucleation and coalescence of domains in the volume of the material. This paper deals with the more general situation of front propagation of the switching state from the sample edge at a multiple nucleation of domains of a new phase on randomly located defects in the volume. The corresponding statistically-kinetic problem is solved with the calculation of the average magnitude and dispersion of path lengths, as well as the full generating function for finding higher moments of distribution of “the relay” run lengths of the boundary of the edge domain.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fluctuations of the orbital angular momentum of a laser beam, carrying an optical vortex, in the turbulent atmosphere

The evolution of the orbital angular momentum (OAM) of a Laguerre-Gaussian beam interacting with turbulent inhomogeneities of the atmosphere is studied theoretically. The integral representations are obtained for the OAM in terms of the distributions of the random intensity and random field of the permittivity of the medium, and also for OAM statistical characteristics in terms of corresponding correlation functions. It is found that the average OAM value is preserved during the propagation of the laser beam in a random medium. The dependence of the dispersion of OAM fluctuations on the atmospheric turbulence and beam parameters is calculated. It is shown that the dependence of the OAM dispersion on the initial angular momentum of the laser beam disappears in the case of very strong turbulence. (laser beams)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Total reflection, frequency, and velocity tuning in optical pulse collision in nonlinear dispersive media

The total internal reflection of a weak signal pulse from a powerful reference pulse at another frequency in a dispersive nonlinear medium is demonstrated. As a result of the two-wave collision, the signal pulse changes its frequency and group velocity, and time delay occurs. We develop both a wave and a pulse-tracing theory of the total reflection from the moving inhomogeneity induced by the optical pulse. An analytical expression for the critical value of group-velocity mismatch as a function of pump intensity and the group-velocity dispersion are obtained. The possibility of signal pulse reflection from a bright soliton in a cubic medium is considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards violation of Born's rule: description of a simple experiment

Recently a new model with hidden variables of the wave type was elaborated, so called prequantum classical statistical field theory (PCSFT). Roughly speaking PCSFT is a classical signal theory applied to a special class of signals - 'quantum systems'. PCSFT reproduces successfully all probabilistic predictions of QM, including correlations for entangled systems. This model peacefully coexists with all known no-go theorems, including Bell's theorem. In our approach QM is an approximate model. All probabilistic predictions of QM are only (quite good) approximations of 'real physical averages'. The latter are averages with respect to fluctuations of prequantum fields. In particular, Born's rule is only an approximate rule. More precise experiments should demonstrate its violation. We present a simple experiment which has to produce statistical data violating Born's rule. Since the PCSFT-presentation of this experiment may be difficult for experimenters, we reformulate consequences of PCSFT in terms of the conventional wave function. In general, deviation from Born's rule is rather small. We found an experiment amplifying this deviation. We start with a toy example. Then we present a more realistic example based on Gaussian states with very small dispersion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of sequence dispersity on morphology of tapered diblock copolymers from molecular dynamics simulations

Tapered diblock copolymers are similar to typical AB diblock copolymers but have an added transition region between the two blocks which changes gradually in composition from pure A to pure B. This tapered region can be varied from 0% (true diblock) to 100% (gradient copolymer) of the polymer length, and this allows some control over the microphase separated domain spacing and other material properties. We perform molecular dynamics simulations of linearly tapered block copolymers with tapers of various lengths, initialized from fluids density functional theory predictions. To investigate the effect of sequence dispersity, we compare systems composed of identical polymers, whose taper has a fixed sequence that most closely approximates a linear gradient, with sequentially disperse polymers, whose sequences are created statistically to yield the appropriate ensemble average linear gradient. Especially at high segregation strength, we find clear differences in polymer conformations and microstructures between these systems. Importantly, the statistical polymers are able to find more favorable conformations given their sequence, for instance, a statistical polymer with a larger fraction of A than the median will tend towards the A lamellae. The conformations of the statistically different polymers can thus be less stretched, and these systems have higher overall density. Consequently, the lamellae formed by statistical polymers have smaller domain spacing with sharper interfaces

36 MATERIALS SCIENCE↗

A convenient strategy to functionalize carbon nanotubes with ascorbic acid and its effect on the physical and thermomechanical properties of poly(amide–imide) composites

Multi-walled carbon nanotubes (MWCNTs) were functionalized by ascorbic acid by a fast strategy under microwave irradiation to improve interfacial interactions and dispersion of CNTs in a poly(amide–imide) (PAI) matrix. This technique provides a rapid and economically viable route to produce covalently functionalized CNTs. The as-prepared, new type of functionalized CNTs were analyzed by several techniques. The thermal stabilities and mechanical interfacial properties of CNT/PAI composites were investigated using several techniques. The dispersion state of CNTs in the PAI matrix was observed by field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The mechanical interfacial property of the composites was significantly increased by the addition of ascorbic acid treated CNTs. The FE-SEM and TEM results showed that the separation and uniform dispersion of CNTs in the PAI matrix. The overview of these recent results is presented. -- Graphical abstract: Presentation of possible interactions of hydrogen bonding between the MWCNT-AS and the PAI chains. Highlights: • Surface functionalization of MWCNTs with ascorbic acid under microwave irradiation. • The MWCNT-AS/PAI composite films were fabricated by solution blending process. • Microstructure and MWCNT states in the composites were studied. • Thermal and mechanical properties of the composite films were evaluated. • Films of different contents of the MWCNTs-AS showed a superior tensile behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emission properties of body-centered cubic elemental metal photocathodes

A first principles analysis of photoemission is developed to explain the lower than expected rms transverse electron momentum measured using the solenoid scan technique for the body-centered cubic Group Vb (V, Nb, and Ta) and Group VIb (Cr, Mo, and W) metallic photocathodes. The density functional theory based analysis elucidates the fundamental role that the electronic band structure (and its dispersion) plays in determining the emission properties of solid-state photocathodes and includes evaluation of work function anisotropy using a thin-slab method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phosphate glass matrix composites incorporating trisilanol phenyl polyhedral oligomeric silsesquioxane prepared by viscous flow sintering method with enhanced benefits

The effect of mixing and sintering processes to prepare tin fluorophosphate glass (Pglass) matrix composites incorporating trisilanol phenyl polyhedral oligomeric silsesquioxane (TSP-POSS) was investigated by comparing manual and suspension mixing, one-step and stepwise sintering processes to explore the structure dynamics and physical properties in the composites as a function of the different process conditions used. Energy Dispersive X-ray analysis confirmed optimal homogeneous dispersion of the TSP-POSS molecules in the composites prepared by the suspension method. The observed increase of glass transition temperature and the reduction of non-bridging bonds in the composites are believed to be the reason for the effective dispersion of TSP-POSS molecules in the composites. The chemical reaction between the TSP-POSS and Pglass was strongly influenced by the mixing/dispersion and sintering processes investigated. 13 C cross polarized magic angle spinning (CP MAS) solid state nuclear magnetic resonance (NMR) spectroscopy confirmed the chemical stability of the TSP-POSS during the sintering process at elevated temperatures. In addition, a chemical reaction between the TSP-POSS and Pglass was evidenced by 29 Si CP MAS NMR analysis. Here, this study will provide a better fundamental understanding of the effective dispersion mechanism of the TSP-POSS molecules in the Pglass matrix that will facilitate tailoring the physicochemical properties of the composites with addition of various small concentrations of TSP-POSS for a number of applications where the pure Pglass is not applicable due to the intrinsic properties of the Pglass.

36 MATERIALS SCIENCE↗

Size Dependent Optical Properties and Structure of ZnS Nanocrystals Prepared from a Library of Thioureas

Here, ZnS nanocrystals (λ max (1S e -1S 3/2h ) = 260 - 320 nm, d = 1.7 - 10.0 nm) are synthesized from Zn(O 2 CR) 2 (O 2 CR = tetra-decanoate, oleate and 2-hexyldecanoate), N,N'-disubstituted and N,N',N'-trisubstituted thioureas, and P,P,N-trisubstituted phos-phanecarbothioamides. The influence of precursor substitution, ligand sterics, and reaction temperature on the final nanocrystal size were evaluated. By using saturated hydrocarbon solvents and saturated aliphatic carboxylate ligands, polymeric byproducts could be avoided and pure ZnS nanocrystals isolated. Elevated temperatures, slower precursor conversion reactivity and branched zinc 2-hexyldecanoate yield the largest ZnS nanocrystals. Carefully purified zinc carboxylate, rapidly converting precursors, and cooling the synthesis mixture following complete precursor conversion provide quasi spherical nanocrystals with the narrowest shape dispersity. Nanocrystal sizes were measured using pair distribution function (PDF) analysis of X-ray scattering and scanning transmission electron microscopy (STEM) and plotted versus the energy of their first excitonic optical absorption. The resulting empirical relationship provides a useful method to characterize the nanocrystal size from 1.7-4.0 nm using optical absorption spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Data-Driven Many-Body Models for Molecular Fluids: CO 2 /H 2 O Mixtures as a Case Study

In this study, we extend the scope of the many-body TTM-nrg and MB-nrg potential energy functions (PEFs), originally introduced for halide ion–water and alkali-metal ion–water interactions, to the modeling of carbon dioxide (CO2) and water (H2O) mixtures as prototypical examples of molecular fluids. Both TTM-nrg and MB-nrg PEFs are derived entirely from electronic structure data obtained at the coupled cluster level of theory and are, by construction, compatible with MB-pol, a many-body PEF that has been shown to accurately reproduce the properties of water. Although both TTM-nrg and MB-nrg PEFs adopt the same functional forms for describing permanent electrostatics, polarization, and dispersion, they differ in the representation of short-range contributions, with the TTM-nrg PEFs relying on conventional Born–Mayer expressions and the MB-nrg PEFs employing multidimensional permutationally invariant polynomials. By providing a physically correct description of many-body effects at both short and long ranges, the MB-nrg PEFs are shown to quantitatively represent the global potential energy surfaces of the CO 2 –CO 2 and CO 2 –H 2 O dimers and the energetics of small clusters, as well as to correctly reproduce various properties in both gas and liquid phases. Furthermore, building upon previous studies of aqueous systems, our analysis provides further evidence for the accuracy and efficiency of the MB-nrg framework in representing molecular interactions in fluid mixtures at different temperature and pressure conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Auger Heating and Thermal Dissipation in Zero-Dimensional CdSe Nanocrystals Examined Using Femtosecond Stimulated Raman Spectroscopy

In this paper, we report femtosecond stimulated Raman spectroscopy (FSRS) measurements on dispersions of CdSe semiconductor nanocrystals (NCs) as a function of particle size and pump fluence. Upon photoexcitation we observe depletion of stimulated Raman gain corresponding to generation of longitudinal optical (LO) phonons followed by recovery on picosecond timescales. At higher fluences, production of multiple excitons slows recovery of FSRS signals, which we attribute to sustained increases of LO phonon populations due to multiexcitonic Auger heating. Additionally, owing to discretized electronic structure of these NCs, such heating cannot be readily monitored via electronic spectroscopic analysis of high energy band tails as has been performed for higher-dimensionality materials. Notably, recovery timescales exceed those of the biexcitonic Auger recombination process and as such reveal overall thermalization timescales likely owing to an acoustic phonon thermalization bottleneck that dictates the cooling timescale.

36 MATERIALS SCIENCE↗

Phase Behavior of Grafted Polymer Nanocomposites from Field-Based Simulations

There are limited theoretically predicted phase diagrams for polymer nanocomposites (PNCs) because conventional modeling techniques are largely unable to predict the macroscale phase behavior of PNCs. Here, we show that recent field-based methods, including PNC field theory (PNC-FT) and theoretically informed Langevin dynamics, can be used to calculate phase diagrams for polymer-grafted nanoparticles (gNPs) incorporated into a polymer matrix. We calculate binodals for the transition from the miscible, dispersed phase to the macrophase separated state as functions of important experimental parameters, including the ratio of the matrix chain degree of polymerization ( P ) to the grafted chain degree of polymerization ( N ), the enthalpic repulsion between the matrix and grafted chains, the grafting density (σ), the size of the NPs, and the NP volume fraction. We demonstrate that thermal and polymer conformational fluctuations enhance the degree of phase separation in gNP-PNCs, a result of depletion interaction effects. We support this conclusion by experimentally investigating the phase separation of poly(methyl methacrylate)-grafted silica NPs in a polystyrene matrix as a function of P/N . The simulations only agree with experiments when fluctuations are included because fluctuations are needed to properly capture the depletion interactions between the gNPs. Here, we clarify the role of conformational entropy in driving depletion interactions in PNCs and suggest that inconsistencies in the literature may be due to polymer chain length effects since conformational entropy increases with increasing chain length.

36 MATERIALS SCIENCE↗