Search NASA⌕ Search

SEARCH · Search NASA

Results for “dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Epsilon Metal: A Waste Form for Noble Metals from Used Nuclear Fuel

Epsilon metal (e-metal) is the metallic phase that forms as inclusions at the grain boundaries in the UO2 fuel during reactor operation. This metal is composed of Pd, Mo, Rh, Ru, and Tc. These metallic inclusions are insoluble in strong acid and remnants of these metallic inclusions have been found in the UO2 matrix that remains from the natural reactors in Gabon that were active 1.8 billion years ago, therefore e-metal should be an excellent waste form for the immobilization of the long-lived isotopes 107Pd (6.5 ? 106 a) and 99Tc (2.13 ? 105 a), with 99Tc being the isotope of interest for repository performance. Therefore, the chemical durability of this potential waste form is assessed in this study. Typically, corrosion rates for metallic materials are measured electrochemically because they are quick, inexpensive, and can reveal the mechanism by which a metal corrodes, at least initially. However, in a repository the waste form would be subjected to slowly flowing water without an applied electrical potential over long time periods. Therefore, the corrosion rates of e-metal specimens were measured with both electrochemical tests and the single-pass flow-through test (SPFT). Potentiodynamic and potentiostatic polarization results suggest that a thin passive film exists on the alloy surface, which seems to be responsible for its high corrosion resistance. Additionally, X-Ray photoelectron spectroscopic results suggest that Pd oxides are significantly enriched in the passive film Results from the SPFT show that the dissolution rates were weakly dependent on pH. Only Mo and Re were found in solution and were used for the calculation of the dissolution rates. In general, the electrochemically determined corrosion rates agree reasonably well with the initial dissolution rate measured with the SPFT test, but they are about one or two orders of magnitude higher than the steady state rates. The causes for this discrepancy are discussed.

epsilon-metal, nuclear waste form, corrosion, sing↗

A Green Approach to SNF Reprocessing: Are Common Household Reagents the Answer?

It has been discovered that UO2, the principal component of spent nuclear fuel (SNF), can efficiently be dissolved at room temperature using a combination of common household reagents, namely hydrogen peroxide, baking soda, and ammonia. This rather serendipitous discovery opens up the possibility, for the first time, of considering a non-acidic process for recycling U from SNF. Albeit at the early stages of development, our unconventional dissolution approach possesses many attractive features that could make it a reality in the future. With dissolution byproducts of water and oxygen, our approach poses a minimal threat to the environment. Moreover, the use of common household reagents to afford actinide oxide dissolution suggests a certain degree of economic favorability. With the use of a “closed” digestion vessel as a reaction chamber, our approach has substantial versatility with the option of using either aqueous or gaseous reactant feeds or a combination of both. Our approach distinguishes itself from all existing reprocessing technologies in two important ways. First and foremost, it is an alkaline rather than an acidic process, using mild non-corrosive chemicals under ambient conditions to effect actinide separations. Secondly, it does not dissolve the entire SNF matrix, but rather selectively solubilizes U and other light actinides for subsequent separation, resulting in potentially faster head-end dissolution and fewer downstream separation steps. From a safeguards perspective, the use of oxidizing alkaline solutions to effect actinide separations also potentially offers a degree of inherent proliferation resistance, by allowing the U to be selectively removed from the remaining dissolver solution while keeping Pu grouped with the other minor actinides and fission products. This paper will describe the design and general experimental setup of a “closed” digestion vessel for performing uranium oxide dissolutions under alkaline conditions using gaseous reactant feeds, and preliminary data on the parameters affecting the alkaline dissolution of UO2 in aqueous peroxide-containing carbonate systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Lithium-ion battery physics and statistics-based state of health model

A pseudo-2d model using COMSOL Multiphysics® software is developed to simulate performance and performance degradation of Li-ion batteries consisting of layered and olivine cathodes with graphite anode when subjected to peak shaving grid service. Multiple degradation pathways are considered, including solid electrolyte interphase (SEI) formation and breakdown at the anode, cathode dissolution and its synergistic effect on SEI formation at the anode. The model is validated by simulating commercial cylindrical cell performance. A global model is developed to simulate performance across all chemistries, along with individual chemistry models using global model parameters as initial values. There is good agreement between these models for various optimization parameters such as SEI equilibrium potential, cathode dissolution exchange current density, solvent diffusivity in the SEI and SEI ionic conductivity. To circumvent time constraints related to the COMSOL model, a 0d global model is developed which fits data well and provides more clarity on differences in cathode dissolution exchange current density. Again, good agreement for various optimization parameters is obtained among the COMSOL global & individual chemistry models and the 0-d model. The lessons learned from the physics-based model is used to develop a top down statistics-based model using current, voltage and anode volumetric change per mole lithium intercalated, along with their interactions as degradation predictors. This model predicts out of sample degradation for multiple grid services and electric vehicle drive cycle with high accuracy and provides the pathway to develop an efficient battery management system combining machine learning and findings from physics-based computationally intensive algorithms.

Crawford, Aladsair J.↗

Facet-dependent electron transfer induces distinct arsenic reallocations on hematite

The interfacial electron transfer (ET) between electron shuttling compounds and iron (Fe) oxyhydroxides plays a crucial role in the reductive dissolution of Fe minerals and the fate of surface-bound arsenic (As). However, the impact of exposed facets of highly crystalline hematite on reductive dissolution and As immobilization is poorly understood. In this study, we systematically investigated the interfacial processes of the electron shuttling compound cysteine (Cys) on various facets of hematite and the reallocations of surface-bound As(III) or As(V) on the respective surfaces. Our results demonstrate that the ET process between Cys and hematite generates Fe(II) and leads to reductive dissolution, with more Fe(II) generated on {001} facets of exposed hematite nanoplates (HNPs). Reductive dissolution of hematite leads to significantly enhanced As(V) reallocations on hematite. Nevertheless, upon the addition of Cys, a raipd release of As(III) can be halted by its prompt re-adsorption, leaving the extent of As(III) immobilization on hematite unchanged throughout the course of reductive dissolution. This is due to that Fe(II) can form new precipitates with As(V), a process that is facet-dependent and influenced by water chemistry. Electrochemical analysis reveals that HNPs exhibit higher conductivity and ET ability, which is beneficial for reductive dissolution and As reallocations on hematite. In conclusion, these findings highlight the facet-dependent reallocations of As(III) and As(V) facilitated by electron shuttling compounds and have implications for the biogeochemical processes of As in soil and subsurface environments.

54 ENVIRONMENTAL SCIENCES↗

Processing of Sintered Mo Disks Using Hydrogen Peroxide

Dissolution studies performed on NorthStar and ORNL disks show that an increase in sintering temperature has a negative effect on dissolution rates in 30% hydrogen peroxide. This is due to changes in the microstructure of sintered Mo powder. At higher sintering temperatures, the powder particles coalesce, form diffusion bonds, and grow into larger grains, which reduce the open porosity of the disks. The remaining porosity becomes trapped within the grains, and therefore the dissolution rates are very low. We also observed that different starting materials lead to different dissolution properties, and in some cases, even high sintering temperature at 1600°C does not produce disks with high packing densities. Studies with NorthStar disks showed that increased packing density can be achieved by increased pressing conditions without affecting the dissolution rates if mild sintering conditions are used. Future experiments will focus on producing sintered Mo disks produced from recovered Mo material and on optimizing the sintering process to produce disks with >90% packing density and good dissolution rates.

Dissolution↗

NGSI FY15 Final Report. Innovative Sample Preparation for in-Field Uranium Isotopic Determinations

Our FY14 Final Report included an introduction to the project, background, literature search of uranium dissolution methods, assessment of commercial off the shelf (COTS) automated sample preparation systems, as well as data and results for dissolution of bulk quantities of uranium oxides, and dissolution of uranium oxides from swipe filter materials using ammonium bifluoride (ABF). Also, discussed were reaction studies of solid ABF with uranium oxide that provided a basis for determining the ABF/uranium oxide dissolution mechanism. This report details the final experiments for optimizing dissolution of U 3 O 8 and UO 2 using ABF and steps leading to development of a Standard Operating Procedure (SOP) for dissolution of uranium oxides on swipe filters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DEVELOPMENT OF AN INSOLUBLE SALT SIMULANT TO SUPPORT ENHANCED CHEMICAL CLEANING TESTS

The closure process for high level waste tanks at the Savannah River Site will require dissolution of the crystallized salts that are currently stored in many of the tanks. The insoluble residue from salt dissolution is planned to be removed by an Enhanced Chemical Cleaning (ECC) process. Development of a chemical cleaning process requires an insoluble salt simulant to support evaluation tests of different cleaning methods. The Process Science and Engineering section of SRNL has been asked to develop an insoluble salt simulant for use in testing potential ECC processes (HLE-TTR-2007-017). An insoluble salt simulant has been developed based upon the residues from salt dissolution of saltcake core samples from Tank 28F. The simulant was developed for use in testing SRS waste tank chemical cleaning methods. Based on the results of the simulant development process, the following observations were developed: (1) A composition based on the presence of 10.35 grams oxalate and 4.68 grams carbonate per 100 grams solids produces a sufficiently insoluble solids simulant. (2) Aluminum observed in the solids remaining from actual waste salt dissolution tests is probably precipitated from sodium aluminate due to the low hydroxide content of the saltcake. (3) In-situ generation of aluminum hydroxide (by use of aluminate as the Al source) appears to trap additional salts in the simulant in a manner similar to that expected for actual waste samples. (4) Alternative compositions are possible with higher oxalate levels and lower carbonate levels. (5) The maximum oxalate level is limited by the required Na content of the insoluble solids. (6) Periodic mixing may help to limit crystal growth in this type of salt simulant. (7) Long term storage of an insoluble salt simulant is likely to produce a material that can not be easily removed from the storage container. Production of a relatively fresh simulant is best if pumping the simulant is necessary for testing purposes. The insoluble salt simulant described in this report represents the initial attempt to represent the material which may be encountered during final waste removal and tank cleaning. The final selected simulant was produced by heating and evaporation of a salt slurry sample to remove excess water and promote formation and precipitation of solids with solubility characteristics which are consistent with actual tank insoluble salt samples. The exact anion composition of the final product solids is not explicitly known since the chemical components in the final product are distributed between the solid and liquid phases. By combining the liquid phase analyses and total solids analysis with mass balance requirements a calculated composition of assumed simple compounds was obtained and is shown in Table 0-1. Additional improvements to and further characterization of the insoluble salt simulant are possible. During the development of these simulants it was recognized that: (1) Additional waste characterization on the residues from salt dissolution tests with actual waste samples to determine the amount of species such as carbonate, oxalate and aluminosilicate would allow fewer assumptions to be made in constructing an insoluble salt simulant. (2) The tank history will impact the amount and type of insoluble solids that exist in the salt dissolution solids. Varying the method of simulant production (elevated temperature processing time, degree of evaporation, amount of mixing (shear) during preparation, etc.) should be tested.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Optimization of Saltcake Removal Flowsheet at SRS through Incorporation of Testing and In-Tank Waste Experience

Saltcake removal at SRS may be performed for several reasons: to provide space for evaporator operation (i.e., to precipitate more salt in the drop tank), to provide feed for salt processing (i.e. immobilize the waste), or to remove the salt for tank closure. Many different salt dissolution techniques have been employed in the 40 years that SRS has been performing salt removal, from a basic “Add, Sit, Remove” method (water is added on top of the saltcake and time is allowed for diffusion), to performing interstitial liquid removal, or using mixing devices to promote contact with the liquid. Lessons learned from previous saltcake removal campaigns, in addition to testing and modeling, have led to opportunities for improvements to the overall saltcake removal process. This includes better understanding of salt properties and behavior during dissolution; the primary concerns for salt dissolution are the release of radiolytic hydrogen and criticality prevention (post-dissolution). Recent developments in salt dissolution include the reuse of dilute supernate and a semi-continuous dissolution (SCD) process, where low volume mixing eductors are used to deliver water near the surface of the saltcake at the same rate as the salt solution is removed and transferred to a receipt tank.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Treatment of Magnesium-Thorium Alloy Used in Military Defence Equipment by Separation of Thorium and/or Thermal Oxidation - 17009

Magnesium-alloys doped with thorium (Th, 3% by weight and with a total activity content in the alloy of 120 Bq/g) to improve mechanical properties has been used in, among other applications, military equipment such as in the jet-engines in military aircraft. The material cannot, due to the presence of the radioactive Th, be handled as an ordinary scrap metal. It needs to be treated to render a more stable waste form prior to final disposal in which the amount of disposed metallic magnesium is limited due to the pyrophoric properties of such type of materials. By thermally treating the material it is possible to transform the alloy into oxide form (MgO and ThO{sub 2}) which is a much more stable form than metallic. This itself enables a form suitable for final disposal of the material. The oxidation step does however lead to an increase in volume and is therefore not an optimal treatment method. It is possible to treat the metal oxide powder in order to get a better volume reduction such as by super compaction but a better result can be obtained by separating the Th from the alloy, leaving a much smaller volume for final disposal. One way of separating the Th from the metal is by dissolution of metallic material in acid followed by directed precipitation of Th as Th-oxalate. Several parameters such as the choice of acid, metal concentration in the acid solution, pH prior to precipitation and amount of added oxalic acid have been investigated. Another method to separate Th from Mg is to perform a selective dissolution of MgO from an MgO/ThO{sub 2} mixture with HNO{sub 3} leaving only ThO{sub 2} as a residue. These tests had to be preceded with an oxidation of the alloy. The tests show that it is possible to separate Th from the metal alloy by either dissolution followed by precipitation or selective dissolution of MgO from an MgO/ThO{sub 2} mixture. This leads to very effective volume reduction of the waste. For the direct dissolution and precipitation tests typically > 95% of the magnesium can be found in the acid solution while 99.5 % of the Th is found as a solid in the filters. For the oxide dissolution tests typically 98% of the Th can be separated from the bulk material, leaving the acid solution possible to free release and dispose of in the same way as for the previous method. (authors)

36 MATERIALS SCIENCE↗

Optimization of salt-cake removal flowsheet at SRS through incorporation of testing and in-tank waste experience - 15263

Salt-cake removal at SRS may be performed for several reasons: to provide space for evaporator operation (i.e., to precipitate more salt in the drop tank), to provide feed for salt processing (i.e. immobilize the waste), or to remove the salt for tank closure. Many different salt dissolution techniques have been employed in the 40 years that SRS has been performing salt removal, from a basic 'Add, Sit, Remove' method (water is added on top of the salt-cake and time is allowed for diffusion), to performing interstitial liquid removal, or using mixing devices to promote contact with the liquid. Lessons learned from previous salt-cake removal campaigns, in addition to testing and modeling, have led to opportunities for improvements to the overall salt-cake removal process. This includes better understanding of salt properties and behavior during dissolution; the primary concerns for salt dissolution are the release of radiolytic hydrogen and criticality prevention (post-dissolution). Recent developments in salt dissolution include the reuse of dilute supernate and a semi-continuous dissolution (SCD) process, where low volume mixing eductors are used to deliver water near the surface of the salt-cake at the same rate as the salt solution is removed and transferred to a receipt tank. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Task-Specific Ionic Compounds for In-Field Sample Preparation Poster

In the event of a nuclear detonation, actinide and fission product-containing debris can be analyzed to provide information about the nature of the device. In-field sample dissolution prior to transport to a laboratory is critical for reducing the time between an event and delivery of information to decision makers. However, the best dissolution methods utilize liquid strong acid solutions, which are incompatible with field collection Standard Operating Procedure. What is required are solid materials that, when mixed with water in the field, can provide the strong digestion and dissolution properties of nitric and hydrofluoric acids. Fluorohydrogenate ionic liquids have shown a remarkable ability to dissolve a wide range of materials, from refractory actinide oxides to cementitious material such as calcium silicates. These strong dissolution properties are due to the neutral hydrofluoric acid that is bound to the anion component of the ionic liquid. Because these materials are liquids, they are also incompatible with Standard Operating Procedure. However, the physiochemical properties of ionic liquids, such as the melting point, can be readily tuned through minor modification of the molecular structure of the cations and anions. Thus, we hypothesize that by synthesizing modified cations, novel ionic compounds with melting points above ambient but with the same anion and bound hydrofluoric acid – and thus similar digestion and dissolution properties – as current fluorohydrogenate ionic liquids can be produced. These solid materials would be compatible with current Standard Operating Procedure, and would allow for rapid, in-field dissolution of samples, shortening the time to actionable information after an event.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE SUITABILITY OF SODIUM PEROXIDE FUSION FOR PRODUCTION-SCALE PLUTONIUM PROCESSING OPERATIONS

Sodium peroxide (Na{sub 2}O{sub 2}) fusion is a method that offers significant benefits to the processing of high-fired plutonium oxide (PuO{sub 2}) materials. Those benefits include reduction in dissolution cycle time, decrease in residual solids, and reduction of the potential for generation of a flammable gas mixture during dissolution. Implementation of Na{sub 2}O{sub 2} fusion may also increase the PuO{sub 2} throughput in the HB-Line dissolving lines. To fuse a material, Na{sub 2}O{sub 2} is mixed with the feed material in a crucible and heated to 600-700 C. For low-fired and high-fired PuO{sub 2}, Na{sub 2}O{sub 2} reacts with PuO{sub 2} to form a compound that readily dissolves in ambient-temperature nitric acid without the use of potassium fluoride. The Savannah River National Laboratory (SRNL) demonstrated the feasibility of Na{sub 2}O{sub 2} fusion and subsequent dissolution for the processing of high-fired PuO{sub 2} materials in HB-Line. Testing evaluated critical dissolution characteristics and defined preliminary process parameters. Based on experimental measurements, a dissolution cycle can be complete in less than one hour, compared to the current processing time of 6-10 hours for solution heating and dissolution. Final Pu concentrations of 30-35 g/L were produced without the formation of precipitates in the final solution.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Relationship between the Relative Solvating Power of Electrolytes and Shuttling Effect of Lithium Polysulfides in Lithium-Sulfur Batteries

Relative solvating power, that is, the ratio of the coordination ratios between a solvent and the reference solvent, was used to probe the quantitative structure–activity relationship of electrolyte solvents and the lithium polysulfide (LiPS) dissolution in lithium–sulfur batteries. Internally referenced diffusion-ordered nuclear magnetic resonance spectroscopy (IR-DOSY) was used to determine the diffusion coefficient and coordination ratio, from which the relative solvating power can be easily measured. The higher the relative solvating power of an ethereal solvent, the more severe will be the LiPS dissolution and the lower the coulombic efficiency of the lithium–sulfur battery. A linear relationship was established between the logarithm of relative solvating power of a solvent and the degree of LiPS dissolution, rendering relative solvating power an important parameter in choosing the electrolyte solvent for lithium–sulfur batteries.

Su, Chi-Cheung↗

Effects of rate law formulation on predicting CO 2 sequestration in sandstone formations

Injection of CO 2 into confined geological formations, given their massive carbon storage capacity and widespread geographic distribution, represents one of the most promising options for CO 2 sequestration. Reactive transport models have been constructed to understand the process of carbon storage and predict the fate of injected CO 2 . Model results, however, differ dramatically because of the large uncertainties attributed to reaction kinetics. The root of this problem is partly related to the one of the biggest challenges in modern geochemistry: The persistent two to five orders of magnitude discrepancy between laboratory-measured and field-derived feldspar dissolution rates. Recently, advances in reaction kinetics research suggest that the slow precipitation of secondary minerals produces negative feedback in the dissolution–precipitation loop, which reduces the overall feldspar dissolution rates by orders of magnitude. Here in this study, we focused on how the coupling between feldspar dissolution and secondary mineral precipitation, as well as mineral carbonation, is affected by rate law uncertainties. Reactive transport models with four different rate law scenarios were used for CO 2 sequestration in a sandstone formation resembling the Mt. Simon saline reservoir in the Midwest, USA. Lastly, the results indicate that (1) long-term mineral trapping is more sensitive to rate laws for feldspar dissolution than to rate laws for carbonate mineral precipitation and (2) negligence of the sigmoidal shape of rate – ΔGr relationships and the mitigating effects of secondary mineral precipitation can overestimate both the extent of feldspar dissolution during CO 2 injection and in turn mineral trapping.

54 ENVIRONMENTAL SCIENCES↗

Influence of Acidic and Alkaline Waste Solution Properties on Uranium Migration in Subsurface Sediments

This study shows that acidic and alkaline wastes co-disposed with uranium into subsurface sediments has significant impact on changes in uranium retardation, concentration, and mass during downward migration. For uranium co-disposal with acidic wastes, significant rapid (i.e., hours) carbonate and slow (i.e., 100s of hours) clay dissolution resulted, releasing significant sediment-associated uranium, but the extent of uranium release and mobility change was controlled by the acid mass added relative to the sediment proton adsorption capacity. Mineral dissolution in acidic solutions (pH 2) resulted in a rapid (< 10 h) increase in aqueous carbonate (with Ca2+, Mg2+) and phosphate and a slow (100s of hours) increase in silica, Al3+, and K+, likely from 2:1 clay dissolution. Infiltration of uranium with a strong acid resulted in significant shallow uranium mineral dissolution and deeper uranium precipitation (likely as phosphates and carbonates) with downward uranium migration of three times greater mass at a faster velocity relative to uranium infiltration in pH neutral groundwater. In contrast, mineral dissolution in an alkaline environment (pH 13) resulted in a rapid (< 10 h) increase in carbonate, followed by a slow (10s to 100s of hours) increase in silica concentration, likely from montmorillonite, muscovite, and kaolinite dissolution. Infiltration of uranium with a strong base resulted in uranium-silicate precipitation (presumed Na-boltwoodite) but also desorption of natural uranium on the sediment due to the high ionic strength solution, or 60% greater mass with greater retardation compared with groundwater. Overall, these results show that acidic or alkaline co-contaminant disposal with uranium can result in complex depth- and time-dependent changes in uranium dissolution/precipitation reactions and uranium sorption, which alter the uranium migration mass, concentration, and velocity.

acid waste↗

Pb 2+ –Calcite Interactions under Far-from-Equilibrium Conditions: Formation of Micropyramids and Pseudomorphic Growth of Cerussite

The presence of impurity ions is known to significantly influence mineral surface morphology during crystal growth from aqueous solution, but knowledge on impurity ion-mineral interactions during dissolution under far-from equilibrium conditions remains limited. Here we show that calcite (CaCO 3 ) exhibits a rich array of dissolution features in the presence of Pb. During the initial stage, calcite exhibits non-classical surface features characterized as micro pyramids developed spontaneously in acidic Pb-bearing solutions. Subsequent pseudomorphic growth of cerussite (PbCO 3 ) was observed, where nucleation occurred entirely within a pore space created by dissolution at the calcite/substrate interface. Uneven growth rates yielded a cerussite shell made of lath- or dendritic-shaped crystals. The cerussite phase was separated from the calcite by pores of less than 200 nm under transmission X-ray microscopy, consistent with the interface-coupled dissolution-precipitation mechanism. These results show that impurity metal ions exert significant control over the microscale dissolution features found on mineral surfaces and provide new insights into interpreting and designing micro structures observed in naturally-occurring and synthetic carbonate minerals by dissolution. In addition, heterogeneous micro-environments created in transport limited reactions under pore spaces may lead to unusual growth forms during crystal nucleation and precipitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗