Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Thermophysical properties of FLiBe using moment tensor potentials

Fluoride salts are prospective materials for applications in some next-generation nuclear reactors and their thermophysical properties at various conditions are of interest. Experimental measurement of the properties of these salts is often difficult and, in some cases, unfeasible due to challenges from high temperatures, impurity control, and corrosivity. Therefore, accurate theoretical methods are needed for fluoride salt property prediction. In this work, we used moment tensor potentials (MTP) to approximate the potential energy surface of eutectic FLiBe (66.6% LiF – 33.3% BeF2) predicted by the ab initio (DFT-D3) method. Here, we then used the developed potential and molecular dynamics to obtain several thermophysical properties of FLiBe, including radial distribution functions, density, self-diffusion coefficients, thermal expansion, specific heat capacity, bulk modulus, viscosity, and thermal conductivity. Our results show that the MTP potential approximates the potential energy surface accurately and the overall approach yields very good agreement with experimental values. The converged fitting can be obtained with less than 600 configurations generated from DFT calculations, which data can be generated in just 1200 core hours on today's typical processors. The MTP potential is faster than many machine learning potentials and about one order of magnitude slower than widely used empirical molten salt potentials such as Tosi/Fumi.

36 MATERIALS SCIENCE↗

Several Levels of Theory for Description of Isotope Effects in Ozone: Symmetry Effect and Mass Effect

The essential components of theory for the description of isotope effects in recombination reaction that forms ozone are presented, including the introduction of three reaction pathways for symmetric and asymmetric isotopomers, a brief review of relevant experimental data for singly- and doubly substituted isotopologues, the definitions of ζ-effect and η-effect, and the introduction of isotopic enrichment δ. Two levels of theory are developed to elucidate the role of molecular symmetry, atomic masses, vibrational zero-point energies, and rotational excitations in the recombination process. Here, the issue of symmetry is not trivial, since the important factors, such as 1/2 and 2, appear in seven different places in the formalism. It is demonstrated that if all these effects are taken into account properly, then no anomalous isotope effects emerge. At the next level of theory, a model is considered in which one scattering resonance (sitting right at the top of centrifugal barrier) is introduced per ro-vibrational channel. It is found that this approach is equivalent to statistical treatment with partition functions at the transition state. Accurate calculations using hyper-spherical coordinates show that no isotope effects come from difference in the number of states. In contrast, differences in vibrational and rotational energies lead to significant isotope effects. However, those effects appear to be local, found for the rather extreme values of rotational quantum numbers. They largely cancel when rate coefficients are computed for the thermal distribution of rotational excitations. Although large isotope effects (observed in experiments) are not reproduced here, this level of theory can be used as a foundation for more detailed computational treatment, with accurate information about resonance energies and lifetimes computed and included.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

QCD Analysis of the Polarized Deep-Inelastic World Data

The results of a recent next-to-leading order QCD analysis of the world data on polarized deep inelastic scattering are reported. New parameterizations are derived for the quark and gluon distributions, accounting for the massive Wilson coefficient for the charm quarks, and the value of {alpha}{sub s}(M{sub z}{sup 2}) is determined with correlated errors. We obtain {alpha}{sub s}{sup NLO}(M{sub Z}{sup 2}) = 0.1132{sub -0.0095}{sup +0.0056}. Limits on potential higher twist contributions to the structure function g{sub 1}(x,Q{sup 2}) are derived. We also compare to the results obtained by other groups.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Numerical characterization of support recovery in sparse regression with correlated design

Sparse regression is employed in diverse scientific settings as a feature selection method. A pervasive aspect of scientific data is the presence of correlations between predictive features. These correlations hamper both feature selection and estimation and jeopardize conclusions drawn from estimated models. On the other hand, theoretical results on sparsity-inducing regularized regression have largely addressed conditions for selection consistency via asymptotics, and disregard the problem of model selection, whereby regularization parameters are chosen. In this numerical study, we address these issues through exhaustive characterization of the performance of several regression estimators, coupled with a range of model selection strategies. These estimators and selection criteria were examined across correlated regression problems with varying degrees of signal to noise, distributions of non-zero model coefficients, and model sparsity. Our results reveal a fundamental tradeoff between false positive and false negative control in all regression estimators and model selection criteria examined. Additionally, we numerically explore a transition point modulated by the signal-to-noise ratio and spectral properties of the design covariance matrix at which the selection accuracy of all considered algorithms degrades. Overall, we find that SCAD coupled with BIC or empirical Bayes model selection performs the best feature selection across the regression problems considered.

97 MATHEMATICS AND COMPUTING↗

Measurement of elliptic flow of 𝐽/𝜓 in $\sqrt{s_{NN}}$ = 200 GeV ⁢Au + Au collisions at forward rapidity

Here, we report the first measurement of the azimuthal anisotropy of 𝐽/𝜓 at forward rapidity (1.2 < |𝜂| < 2.2) in Au + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV at the BNL Relativistic Heavy Ion Collider. The data were collected by the PHENIX experiment in 2014 and 2016 with integrated luminosity of 14.5 nb −1 . The second Fourier coefficient (𝑣 2 ) of the azimuthal distribution of 𝐽/𝜓 is determined as a function of the transverse momentum (𝑝𝑇) using the event-plane method. The measurements were performed for several selections of collision centrality: 0%–50%, 10%–60%, and 10%–40%. We find that in all cases the values of 𝑣 2 ⁡(𝑝 𝑇 ), which quantify the elliptic flow of 𝐽/𝜓, are consistent with zero. Within uncertainties, the results are consistent with measurements at midrapidity, indicating no significant elliptic flow of the 𝐽/𝜓 within the quark-gluon-plasma medium at collision energies of $\sqrt{s_{NN}}$ = 200 GeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Impact of baryonic feedback on HSC-Y1 weak lensing non-Gaussian statistics

Baryonic feedback is a major systematic in weak lensing cosmology. Its most studied effect is the suppression of the lensing power spectrum, a second-order statistic, on small scales. Motivated by the growing interest in statistics beyond the second order, we investigate the effect of baryons on lensing non-Gaussian statistics and the resulting biases in the matter clustering amplitude S 8 = σ 8 Ω m / 0.3 . We focus on the Subaru Hyper Suprime-Cam Year 1 (HSC-Y1) data which, with its high source number density, closely resembles those expected from the upcoming Euclid and Rubin Legacy Survey of Space and Time. We study four non-Gaussian statistics of convergence maps—peak counts, minimum counts, the probability distribution function, and the scattering transform coefficients—in addition to the usual power spectrum. We first estimate the biases in S 8 using mock observations built from the IllustrisTNG and BAHAMAS hydrodynamical simulations and theoretical models built from dark-matter-only simulations. We find up to 1 σ bias in S 8 when the smallest scales (2 arcmin) and the highest feedback level are considered. We then analyze the HSC-Y1 data and compare the S 8 obtained for each statistic with different smoothing scales or scale cuts. As we expect that baryons mostly affect the small scales, comparing the results obtained from including and excluding small scales can indicate the level of impact from baryons. With HSC data, we find only minor ( ≤ 0.5 σ ) differences in S 8 for all statistics, even when considering very small scales (2 arcmin). Our results suggest that the effect of baryons is insignificant at the level of HSC-Y1 down to 2 arcmin for all statistics examined here, or it is canceled by other scale-dependent systematics.

79 ASTRONOMY AND ASTROPHYSICS↗

Gluon Sivers function from forward exclusive χ c 1 photoproduction on unpolarized protons

Exclusive production of a χ c 1 axial vector quarkonia in photon-proton scattering at high energies requires a C -odd t -channel exchange. In the limit of vanishing momentum transfer this occurs either via the exchange of a photon, the Primakoff process, where the spin of the proton does not change. For axial-vector meson production, as a consequence of the Landau-Yang theorem, the Primakoff cross section is finite as t → 0 . Alternatively, a C -odd spin dependent Odderon can be exchanged, which involves a spin flip of the proton. The resulting cross section is related to the square of the collinear trigluon correlator or the k ⊥ -moment of the gluon Sivers function. Using two models for the gluon Sivers function from the literature we compute the ratio of Sivers to Primakoff cross sections and the angular coefficient λ θ governing the angular distribution of the χ c 1 → J / ψ + γ decay as functions of x . We point out that these observables constrain the magnitude of the gluon Sivers function at small x which could be accessed in electron-proton scattering and ultraperipheral proton-proton and nucleus-proton collisions. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of Pin Detached Space on Heat Transfer and Pin-Fin Arrays

Heat transfer and pressure characteristics in a rectangular channel with pin-fin arrays of partial detachment from one of the endwalls have been experimentally studied. The overall channel geometry (W=76.2 mm, E=25.4 mm) simulates an internal cooling passage of wide aspect ratio (3:1) in a gas turbine airfoil. With a given pin diameter, D=6.35 mm=¼E, three different pin-fin height-to-diameter ratios, H/D=4, 3, and 2, were examined. Each of these three cases corresponds to a specific pin array geometry of detachment spacing (C) between the pin tip and one of the endwalls, i.e., C/D=0, 1, 2, respectively. The Reynolds number, based on the hydraulic diameter of the unobstructed cross-section and the mean bulk velocity, ranges from 10,000 to 25,000. The experiment employs a hybrid technique based on transient liquid crystal imaging to obtain the distributions of the local heat transfer coefficient over all of the participating surfaces, including the endwalls and all the pin elements. Experimental results reveal that the presence of a detached space between the pin tip and the endwall has a significant effect on the convective heat transfer and pressure loss in the channel. The presence of pin-to-endwall spacing promotes wall-flow interaction, generates additional separated shear layers, and augments turbulent transport. In general, an increase in detached spacing, or C/D, leads to lower heat transfer enhancement and pressure drop. However, C/D=1, i.e., H/D=3, of a staggered array configuration exhibits the highest heat transfer enhancement, followed by the cases of C/D=0 and C/D=2, i.e., H/D=4 or 2, respectively.

42 ENGINEERING↗

Effects of Pin Detached Space on Heat Transfer in a Rib Roughened Channel

An experimental study is performed to investigate the heat transfer characteristics and frictional losses in a rib roughened channel combined with detached pin-fins. The overall channel geometry (W=76.2 mm, E=25.4 mm) simulates an internal cooling passage of wide aspect ratio (3:1) in a gas turbine airfoil. With a given pin diameter, D=6.35 mm=[1/4]E, three different pin-fin height-to-diameter ratios, H/D=4, 3, and 2, were examined. Each of these three cases corresponds to a specific pin array geometry of detachment spacing (C) between the pin-tip and one of the endwalls, i.e., C/O=0, 1, 2, respectively. The rib height-to-channel height ratio is 0.0625. Two newly proposed cross ribs, namely the broken rib and full rib are evaluated in this effort. The broken ribs are positioned in between two consecutive rows of pin-fins, while the full ribs are fully extended adjacent to the pin-fins. The Reynolds number, based on the hydraulic diameter of the unobstructed cross section and the mean bulk velocity, ranges from 10,000 to 25,000. The experiment employs a hybrid technique based on transient liquid crystal imaging to obtain distributions of the local heat transfer coefficient over all of the participating surfaces, including the endwalls and all pin elements. The presence of ribs enhances local heat transfer coefficient on the endwall substantially by approximately 20% to 50% as compared to the neighboring endwall. In addition, affected by the rib geometry, which is a relatively low profile as compared to the overall height of the channel, the pressure loss seems to be insensitive to the presence of the ribs. However, from the overall heat transfer enhancement standpoint, the baseline cases (without ribs) outperform cases with broken ribs or full ribs.

42 ENGINEERING↗

Measurement of the azimuthal anisotropy of charged particles produced in $\sqrt{s_{_\text {NN}}}$ = 5.02 TeV Pb+Pb collisions with the ATLAS detector

Measurements of the azimuthal anisotropy in lead–lead collisions at $\sqrt{s_{_\text {NN}}}$ = 5.02 TeV are presented using a data sample corresponding to 0.49 nb -1 integrated luminosity collected by the ATLAS experiment at the LHC in 2015. The recorded minimum-bias sample is enhanced by triggers for “ultra-central” collisions, providing an opportunity to perform detailed study of flow harmonics in the regime where the initial state is dominated by fluctuations. The anisotropy of the charged-particle azimuthal angle distributions is characterized by the Fourier coefficients, v 2 - v 7 , which are measured using the two-particle correlation, scalar-product and event-plane methods. The goal of the paper is to provide measurements of the differential as well as integrated flow harmonics v n over wide ranges of the transverse momentum, 0.5 < p T < 60 GeV, the pseudorapidity, |η|< 2.5, and the collision centrality 0–80%. Results from different methods are compared and discussed in the context of previous and recent measurements in Pb+Pb collisions at $\sqrt{s_{_\text {NN}}}$ = 2.76 TeV and 5.02 TeV . In particular, the shape of the p T dependence of elliptic or triangular flow harmonics is observed to be very similar at different centralities after scaling the v n and p T values by constant factors over the centrality interval 0–60% and the p T range 0.5 < p T < 5 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NMR_DIFFSIM v. 1.0

The software generates and analyzes nuclear magnetic resonance spin diffusion simulations for the purpose of measuring domain sizes or spin diffusion constants in a heterogenous sample. Its primary capabilities are: 1. It solves the spin magnetization diffusion equation to simulate the results of a spin diffusion experiment using any structural input geometry, including structure models generated by molecular dynamics or other computational or experimental methods. 2. It compares the results of simulations on an input structure to experimental data, providing a data fitting algorithm to extract physical information from the experimental data via the simulation. 3. It can provide statistical measures to compare correlations between structural models, to determine domain clustering and connectedness, and to provide goodness-of-fit measures including chord length distributions, chi-squared values, Pearson coefficients and pair correlation functions. 4. It provides output reports, data files, and movies to visualize simulation results.

Sorte, Eric↗

Benchmark Evaluation of Start-Up and Zero-Power Measurements at the High-Temperature Engineering Test Reactor

Benchmark models were developed to evaluate six cold-critical and two warm-critical, zero-power measurements of the HTTR. Additional measurements of a fully-loaded subcritical configuration, core excess reactivity, shutdown margins, six isothermal temperature coefficients, and axial reaction-rate distributions were also evaluated as acceptable benchmark experiments. Insufficient information is publicly available to develop finely-detailed models of the HTTR as much of the design information is still proprietary. However, the uncertainties in the benchmark models are judged to be of sufficient magnitude to encompass any biases and bias uncertainties incurred through the simplification process used to develop the benchmark models. Dominant uncertainties in the experimental keff for all core configurations come from uncertainties in the impurity content of the various graphite blocks that comprise the HTTR. Monte Carlo calculations of keff are between approximately 0.9 % and 2.7 % greater than the benchmark values. Reevaluation of the HTTR models as additional information becomes available could improve the quality of this benchmark and possibly reduce the computational biases. High-quality characterization of graphite impurities would significantly improve the quality of the HTTR benchmark assessment. Simulation of the other reactor physics measurements are in good agreement with the benchmark experiment values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanisms influencing and prediction of tool influence function spots during hemispherical sub-aperture tool polishing on fused silica

Sub-aperture tool polishing of precision optics requires a detailed understanding of the local material removal [tool influence function (TIF)] at the contact spot between the workpiece and tool to achieve high removal determinism and hence precision of the optic relative to the desired/design surface figure. In this study, the mechanisms influencing and the quantitative prediction of the removal rate and shape of TIF spots during polishing of fused silica glass with cerium oxide slurry using a rotating hemispherical pad-foam tool for a wide variety of process conditions (including tool properties, kinematics, and applied displacements) are investigated. The TIF volumetric removal rate can be estimated utilizing the average relative velocity and contact area using a simple analytical model. In addition, stability of the volumetric removal rate for fixed process conditions is shown to be greatly dependent on the pad preparation and amount of tool use (affecting both pad topography and slurry buildup), whose general behavior shows an increase in removal rate followed by stabilization with polishing time. The determination of the TIF removal shape is more complex. An extended version of the Preston removal model is developed to explain a comprehensive set of measured TIF removal shapes to within ∼ <#comment/> 22 % <#comment/> . This model incorporates a number of phenomena impacting the TIF removal shape including: (a) temporal and spatial dependent relative velocity between the workpiece and tool; (b) an elastic mechanics based, as well as hydrodynamic, pressure distribution; (c) a spatially dependent friction coefficient possibly caused by both reduced slurry replenishment in low velocity regions and pad slurry islands (100 µm scale) and porosity (millimeter scale); and (d) a shear-based removal mechanism on the periphery of the contact spot.

Suratwala, T. (ORCID:0000000190861039)↗

Modeling of three-dimensional mixing and reacting ducted flows

A computer code, based upon a finite element solution algorithm, was developed to solve the governing equations for three-dimensional, reacting boundary region, and constant area ducted flow fields. Effective diffusion coefficients are employed to allow analyses of turbulent, transitional or laminar flows. The code was used to investigate mixing and reacting hydrogen jets injected from multiple orifices, transverse and parallel to a supersonic air stream. Computational results provide a three-dimensional description of velocity, temperature, and species-concentration fields downstream of injection. Experimental data for eight cases covering different injection conditions and geometries were modeled using mixing length theory (MLT). These results were used as a baseline for examining the relative merits of other mixing models. Calculations were made using a two-equation turbulence model (k+d) and comparisons were made between experiment and mixing length theory predictions. The k+d model shows only a slight improvement in predictive capability over MLT. Results of an examination of the effect of tensorial transport coefficients on mass and momentum field distribution are also presented. Solutions demonstrating the ability of the code to model ducted flows and parallel strut injection are presented and discussed.

Zelazny, S. W.↗

Tables of the coefficients A

Numerical coefficients required to express the angular distribution for the rotationally elastic or inelastic scattering of electrons from a diatomic molecule were tabulated for the case of nitrogen and in the energy range from 0.20 eV to 10.0 eV. Five different rotational states are considered.

Chandra, N.↗

On the gravitational potential and field anomalies due to thin mass layers

The gravitational potential and field anomalies for thin mass layers are derived using the technique of matched asymptotic expansions. An inner solution is obtained using an expansion in powers of the thickness and it is shown that the outer solution is given by a surface distribution of mass sources and dipoles. Coefficients are evaluated by matching the inner expansion of the outer solution with the outer expansion of the inner solution. The leading term in the inner expansion for the normal gravitational field gives the Bouguer formula. The leading term in the expansion for the gravitational potential gives an expression for the perturbation to the geoid. The predictions given by this term are compared with measurements by satellite altimetry. The second-order terms in the expansion for the gravitational field are required to predict the gravity anomaly at a continental margin. The results are compared with observations.

Ockendon, J. R.↗