Search NASA⌕ Search

SEARCH · Search NASA

Results for “grid simulator testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Correlation of predicted and measured thermal stresses on an advanced aircraft structure with similar materials

A laboratory heating test simulating hypersonic heating was conducted on a heat-sink type structure to provide basic thermal stress measurements. Six NASTRAN models utilizing various combinations of bar, shear panel, membrane, and plate elements were used to develop calculated thermal stresses. Thermal stresses were also calculated using a beam model. For a given temperature distribution there was very little variation in NASTRAN calculated thermal stresses when element types were interchanged for a given grid system. Thermal stresses calculated for the beam model compared similarly to the values obtained for the NASTRAN models. Calculated thermal stresses compared generally well to laboratory measured thermal stresses. A discrepancy of signifiance occurred between the measured and predicted thermal stresses in the skin areas. A minor anomaly in the laboratory skin heating uniformity resulted in inadequate temperature input data for the structural models.

Jenkins, J. M.↗
NASA NTRS1991

The design/analysis of flows through turbomachinery - A viscous/inviscid approach

A new design/analysis system for the flows through turbomachinery is currently being developed for studying turbomachinery problems with an axisymmetric viscous/inviscid 'average-passage' throughflow code. The advantage of this approach, compared to streamline curvature codes, is that the solutions obtained simulate some of the unsteadiness, compressibility and viscous effects of a multistage turbomachine. The design/analysis system consists of three elemental parts, the axisymmetric block grid generator, the blade surface element code, and the axisymmetric flow code. Each element of the system will be discussed and the flow solutions for three axisymmetric geometries will be shown compared to experimental data where available. The computations are shown to be in very good agreement with test data for SR7 spinner body and transonic boattail geometry obtained in the wind tunnels at NASA Lewis Research Center. The VIADAC Rotor 67 Fan results were compared to PARC2D calculated results and shown to be in very good agreement.

Miller, D. P.↗
NASA NTRS2000

Performance Modeling of an Experimental Laser Propelled Lightcraft

A computational plasma aerodynamics model is developed to study the performance of an experimental laser propelled lightcraft. The computational methodology is based on a time-accurate, three-dimensional, finite-difference, chemically reacting, unstructured grid, pressure- based formulation. The underlying physics are added and tested systematically using a building-block approach. The physics modeled include non-equilibn'um thermodynamics, non-equilibrium air-plasma finite-rate kinetics, specular ray tracing, laser beam energy absorption and equi refraction by plasma, non-equilibrium plasma radiation, and plasma resonance. A series of transient computations are performed at several laser pulse energy levels and the simulated physics are discussed and compared with those of tests and literature. The predicted coupling coefficients for the lightcraft compared reasonably well with those of tests conducted on a pendulum apparatus.

Wang, Ten-See↗
NASA NTRS2014

Cart3D Simulations for the First AIAA Sonic Boom Prediction Workshop

Simulation results for the First AIAA Sonic Boom Prediction Workshop (LBW1) are presented using an inviscid, embedded-boundary Cartesian mesh method. The method employs adjoint-based error estimation and adaptive meshing to automatically determine resolution requirements of the computational domain. Results are presented for both mandatory and optional test cases. These include an axisymmetric body of revolution, a 69deg delta wing model and a complete model of the Lockheed N+2 supersonic tri-jet with V-tail and flow through nacelles. In addition to formal mesh refinement studies and examination of the adjoint-based error estimates, mesh convergence is assessed by presenting simulation results for meshes at several resolutions which are comparable in size to the unstructured grids distributed by the workshop organizers. Data provided includes both the pressure signals required by the workshop and information on code performance in both memory and processing time. Various enhanced techniques offering improved simulation efficiency will be demonstrated and discussed.

Predictions↗
NASA NTRSDate not supplied

OVERFLOW Analysis of Supersonic Retropropulsion Testingon the CobraMRV Mars Entry Vehicle Concept

The CFD solver OVERFLOW was used to simulate the CobraMRV undergoing supersonic retropropulsion (SRP) in the Langley Unitary Plan Wind Tunnel as part of a pre-test study. Aerodynamics of the CobraMRV are summarized and the sensitivity of vehicle loads to CFD parameters at a subset of operating conditions are investigated. Specific numerical methods, boundary conditions, and turbulence modeling options have been selected after considering the complex phenomena in SRP flows. Proper shock-capturing methods and dynamic grid adaption are necessary to correctly capture vehicle loads and dynamics. Present data indicates that at particular conditions, upstream asymmetries originating from the tunnel inflow plane contribute to measurable asymmetries on the CobraMRV heatshield.

OVERFLOW↗
DOE OSTI2024

Asynchronous GPU-based DEM solver embedded in commercial CFD software with polyhedral mesh support

A novel graphical processing unit-based discrete element method solver is introduced to improve stability, performance, and provide seamless integration into commercial or open-source computational fluid dynamics software. A key innovation is eliminating a need for network communication between solvers, which was previously required for cross-platform coupling. This is accomplished by a direct coupling method that employs dynamic-linked libraries. Furthermore, the solver optimizes memory usage by streamlining the particle-cell search algorithm by eliminating the cells' searching grid. This ensures the solver is compatible with a wide range of mesh types, providing high geometric flexibility. The approach simplifies the simulation process by directly incorporating computational fluid dynamics mesh information into the discrete element method solver. The performance analysis indicates about sixteen times boost in computational speed compared to benchmark central processing unit-based solvers. Finally, the solver's compatibility with polyhedral meshes, a vital advantage for complex geometries, is tested against a referenced study regarding the simulation of an immersed-tube fluidized bed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

A Grid-Forming Split-Phase Three-Leg Inverter with Unbalanced Loading and Active Power Decoupling

This paper presents a split-phase three-leg inverter that regulates 180-degree phase-shifted AC voltages to support residential house loads under unbalanced loading conditions and decouples double line frequency power pulsation by utilizing the third half-bridge switching leg. The active power decoupling function is added without extra active switching components. The control feasibility and effectiveness are verified through MATLAB Simulink simulation and controller hardware-in-the-loop test.

Kim, Namwon [ORNL] (ORCID:0000000200438489)↗
DOE OSTI2024

Storage Sizing and Placement Simulation: Quick-Start Case Study User’s Guide

The Storage Sizing and Placement Simulation (SSIM) application allows a user to define the possible sizes and locations of energy storage elements on an existing grid model defined in OpenDSS. Given these possibilities, the software will automatically search through them and attempt to determine which configurations result in the best overall grid performance. This quick-start guide will go through, in detail, the creation of an SSIM model based on a modified version of the IEEE 34 bus test feeder system. There are two primary parts of this document. The first is a complete list of instructions with little-to-no explanation of the meanings of the actions requested. The second is a detailed description of each input and action stating the intent and effect of each. There are links between the two sections.

25 ENERGY STORAGE↗
NASA NTRS1988

Model consistency in large eddy simulation of turbulent channel flows

Combinations of filters and subgrid scale stress models for large eddy simulation of the Navier-Stokes equations are examined by a priori tests and numerical simulations. The structure of the subgrid scales is found to depend strongly on the type of filter used, and consistency between model and filter is essential to ensure accurate results. The implementation of consistent combinations of filter and model gives more accurate turbulence statistics than those obtained in previous investigations in which the models were chosen independently from the filter. Results and limitations of the a priori test are discussed. The effect of grid refinement is also examined.

Piomelli, Ugo↗
NASA NTRS1990

NASCAP/LEO calculations of current collection

NASCAP/LEO is a 3-dimensional computer code for calculating the interaction of a high-voltage spacecraft with the cold dense plasma found in Low Earth Orbit. Although based on a cubic grid structure, NASCAP/LEO accepts object definition input from standard computer aided design (CAD) programs so that a model may be correctly proportioned and important features resolved. The potential around the model is calculated by solving the finite element formulation of Poisson's equation with an analytic space charge function. Five previously published NASCAP/LEO calculations for three ground test experiments and two space flight experiments are presented. The three ground test experiments are a large simulated panel, a simulated pinhole, and a 2-slit experiment with overlapping sheaths. The two space flight experiments are a solar panel biased up to 1000 volts, and a rocket-mounted sphere biased up to 46 kilovolts. In all cases, the authors find good agreement between calculation and measurement.

Mandell, Myron J.↗
NASA NTRS1994

A dynamic localization model with stochastic backscatter

The modeling of subgrid scales in large-eddy simulation (LES) has been rationalized by the introduction of the dynamic localization procedure. This method allows one to compute rather than prescribe the unknown coefficients in the subgrid-scale model. Formally, the LES equations are supposed to be obtained by applying to the Navier-Stokes equations a 'grid filter' operation. Though the subgrid stress itself is unknown, an identity between subgrid stresses generated by different filters has been derived. Although preliminary tests of the Dynamic Localization Model (DLM) with k-equation have been satisfactory, the use of a negative eddy viscosity to describe backscatter is probably a crude representation of the physics of reverse transfer of energy. Indeed, the model is fully deterministic. Knowing the filtered velocity field and the subgrid-scale energy, the subgrid stress is automatically determined. We know that the LES equations cannot be fully deterministic since the small scales are not resolved. This stems from an important distinction between equilibrium hydrodynamics and turbulence. In equilibrium hydrodynamics, the molecular motions are also not resolved. However, there is a clear separation of scale between these unresolved motions and the relevant hydrodynamic scales. The result of molecular motions can then be separated into an average effect (the molecular viscosity) and some fluctuations. Due to the large number of molecules present in a box with size of the order of the hydrodynamic scale, the ratio between fluctuations and the average effect should be very small (as a result of the 'law of large numbers'). For that reason, the hydrodynamic balance equations are usually purely deterministic. In turbulence, however, there is no clear separation of scale between small and large eddies. In that case, the fluctuations around a deterministic eddy viscosity term could be significant. An eddy noise would then appear through a stochastic term in the subgrid-scale model and could be the source of backscatter.

Carati, Daniele↗
NASA NTRS2004

Overview of Transonic to Hypersonic Stage Separation Tool Development for Multi-Stage-to-Orbit Concepts

An overview of research efforts at NASA in support of the stage separation and ascent aerothermodynamics research program is presented. The objective of this work is to develop a synergistic suite of experimental, computational, and engineering tools and methods to apply to vehicle separation across the transonic to hypersonic speed regimes. Proximity testing of a generic bimese wing-body configuration is on-going in the transonic (Mach numbers 0.6, 1.05, and 1.1), supersonic (Mach numbers 2.3, 3.0, and 4.5) and hypersonic (Mach numbers 6 and 10) speed regimes in four wind tunnel facilities at the NASA Langley Research Center. An overset grid, Navier-Stokes flow solver has been enhanced and demonstrated on a matrix of proximity cases and on a dynamic separation simulation of the bimese configuration. Steady-state predictions with this solver were in excellent agreement with wind tunnel data at Mach 3 as were predictions via a Cartesian-grid Euler solver. Experimental and computational data have been used to evaluate multi-body enhancements to the widely-used Aerodynamic Preliminary Analysis System, an engineering methodology, and to develop a new software package, SepSim, for the simulation and visualization of vehicle motions in a stage separation scenario. Web-based software will be used for archiving information generated from this research program into a database accessible to the user community. Thus, a framework has been established to study stage separation problems using coordinated experimental, computational, and engineering tools.

Murphy, Kelly J.↗
NASA NTRS2017

Wall-Resolved Large-Eddy Simulation of Flow Separation Over NASA Wall-Mounted Hump

This paper reports the findings from a study that applies wall-resolved large-eddy simulation to investigate flow separation over the NASA wall-mounted hump geometry. Despite its conceptually simple flow configuration, this benchmark problem has proven to be a challenging test case for various turbulence simulation methods that have attempted to predict flow separation arising from the adverse pressure gradient on the aft region of the hump. The momentum-thickness Reynolds number of the incoming boundary layer has a value that is near the upper limit achieved by recent direct numerical simulation and large-eddy simulation of incompressible turbulent boundary layers. The high Reynolds number of the problem necessitates a significant number of grid points for wall-resolved calculations. The present simulations show a significant improvement in the separation-bubble length prediction compared to Reynolds-Averaged Navier-Stokes calculations. The current simulations also provide good overall prediction of the skin-friction distribution, including the relaminarization observed over the front portion of the hump due to the strong favorable pressure gradient. We discuss a number of problems that were encountered during the course of this work and present possible solutions. A systematic study regarding the effect of domain span, subgrid-scale model, tunnel back pressure, upstream boundary layer conditions and grid refinement is performed. The predicted separation-bubble length is found to be sensitive to the span of the domain. Despite the large number of grid points used in the simulations, some differences between the predictions and experimental observations still exist (particularly for Reynolds stresses) in the case of the wide-span simulation, suggesting that additional grid resolution may be required.

Uzun, Ali↗
DOE OSTI2020

Fault Response of Distributed Energy Resources Considering the Requirements of IEEE 1547-2018

Inverter-based DER responses to faults on the electric power system are different than those of conventional generators and are often poorly understood. Inverter fault responses are largely software-defined, within physics-based constraints. DERs are regulated by standards and grid codes that also constrain their responses. Though fault response of DERs will vary widely, for any DER following any particular standard, a pattern of fault response can be synthesized by observing that particular standard. In this paper, the recently published IEEE 1547-2018 is examined to explore the general fault response of any DER that follows IEEE 1547-2018. Additionally, an IEEE 1547-2018 compliant inverter model is developed and tested in simulation to find the fault response, and that response is compared with the fault response of a commercial off-the-shelf inverter.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2017

Quinoa, Version 0.2

Quinoa is a set of computational tools that enables research and numerical analysis in fluid dynamics. At this time it remains a test-bed to experiment with various algorithms using fully asynchronous runtime systems. Currently, Quinoa consists of the following tools: (1) Walker, a numerical integrator for systems of stochastic differential equations in time. It is a mathematical tool to analyze and design the behavior of stochastic differential equations. It allows the estimation of arbitrary coupled statistics and probability density functions and is currently used for the design of statistical moment approximations for multiple mixing materials in variable-density turbulence. (2) Inciter, an overdecomposition-aware finite element field solver for partial differential equations using 3D unstructured grids. Inciter is used to research asynchronous mesh-based algorithms and to experiment with coupling asynchronous to bulk-synchronous parallel code. Two planned new features of Inciter, compared to the previous release (LA-CC-16-015), to be implemented in 2017, are (a) a simple Navier-Stokes solver for ideal single-material compressible gases, and (b) solution-adaptive mesh refinement (AMR), which enables dynamically concentrating compute resources to regions with interesting physics. Using the NS-AMR problem we plan to explore how to scale such high-load-imbalance simulations, representative of large production multiphysics codes, to very large problems on very large computers using an asynchronous runtime system. (3) RNGTest, a test harness to subject random number generators to stringent statistical tests enabling quantitative ranking with respect to their quality and computational cost. (4) UnitTest, a unit test harness, running hundreds of tests per second, capable of testing serial, synchronous, and asynchronous functions. (5) MeshConv, a mesh file converter that can be used to convert 3D tetrahedron meshes from and to either of the following formats: Gmsh, http://www.geuz.org/gmsh, Netgen, http://sourceforge.net/apps/mediawiki/netgen-mesher, ExodusII, http://sourceforge.net/projects/exodusii, HyperMesh, http://www.altairhyperworks.com/product/HyperMesh.

Bakosi, Jozsef↗
DOE OSTI2022

A Machine‐Learning‐Assisted Stochastic Cloud Population Model as a Parameterization of Cumulus Convection

Abstract A machine‐learning‐assisted stochastic cloud population model is coupled with the Advanced Research Weather Research and Forecasting (WRF) model to represent fluctuations in the cloud‐base mass flux associated with the life cycles and interactions among cumulus convection cells. In this cloud population model, the size distribution and the associated cloud‐base mass flux of the convective cells are related to their previous state and to the change in the total convective area via a transition function. The convective area tendency in turn is assumed to depend on the cloud‐base mass flux that is resolved by the host WRF model. The transition function is represented by a single hidden‐layer neural network trained by the evolution of convective cell size distributions in a 1‐km grid‐spacing WRF simulation run over the Australian Monsoon region. At every grid point of the host model, the cloud population model predicts the cell size and cloud‐base mass flux distributions from which a random sample of cells is fed to an entraining parcel model that calculates precipitation as well as the associated liquid water potential temperature and total moisture tendencies. These tendencies are averaged over the cells and provided to the host model. Several regional simulations are performed over tropical and midlatitude domains to test this as a potential approach to scale‐aware parameterization. It is shown that such an approach could be a new promising path to simulating realistic precipitation statistics and propagation of precipitation associated with the Madden‐Julian Oscillation while maintaining realistic depictions of the diurnal cycle over both land and ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Sequential Perturbation-based FDIA Detection using DERs for Unbalanced Distribution System

The power distribution system with its reliance on automated monitoring and control infrastructure makes it a complicated cyber-physical system and vulnerable to various cyber-attacks. This paper proposes a moving target defense inspired false data injection attack (FDIA) detection mechanism for an unbalanced distribution system. In the proposed grid diagnosis service framework, the distribution system operator judiciously manipulates power outputs of a subset of inverter-based distribution energy resources (DERs) to create secret low magnitude voltage perturbations which are inconsequential to the normal operation of the grid. A mixed-integer-linear-programming algorithm is developed to select the optimal set of DERs that can create a voltage perturbation signal of the required magnitude at each sensor location at a minimum cost. Then, a sequential detector is applied that detects for the FDIA as measurements are received from individual sensors. The performance of the proposed perturbation-based FDIA detection framework is demonstrated via simulation of the IEEE 123 bus test system.

Attack Detection↗
DOE OSTI2018

The Role of Dredge-up in Double White Dwarf Mergers

We present the results of an investigation of the dredge-up and mixing during the merger of two white dwarfs (WDs) with different chemical compositions by conducting hydrodynamic simulations of binary mergers for three representative mass ratios. In all the simulations, the total mass of the two WDs is $\lesssim$1.0 M ⊙ . Mergers involving a CO and a He WD have been suggested as a possible formation channel for R Coronae Borealis (RCB)–type stars, and we are interested in testing if such mergers lead to conditions and outcomes in agreement with observations. Even if the conditions during the merger and subsequent nucleosynthesis favor the production of 18 O, the merger must avoid dredging up large amounts of 16 O, or else it will be difficult to produce sufficient 18 O to explain the oxygen ratio observed to be of order unity. Here, we performed a total of nine simulations using two different grid-based hydrodynamics codes using fixed and adaptive meshes and one smooth particle hydrodynamics (SPH) code. We find that in most of the simulations, >10 -2 M ⊙ of 16 O is indeed dredged up during the merger. However, in SPH simulations where the accretor is a hybrid He/CO WD with a ~0.1 M ⊙ layer of helium on top, we find that no 16 O is being dredged up, while in the q = 0.8 simulation <10 -4 M ⊙ of 16 O has been brought up, making a WD binary consisting of a hybrid CO/He WD and a companion He WD an excellent candidate for the progenitor of RCB stars.

79 ASTRONOMY AND ASTROPHYSICS↗