Search NASA⌕ Search

SEARCH · Search NASA

Results for “isolate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Multiscale Microtubule Dynamics in Active Nematics

In microtubule-based active nematics, motor-driven extensile motion of microtubule bundles powers chaotic large-scale dynamics. We quantify the interfilament sliding motion both in isolated bundles and in a dense active nematic. The extension speed of an isolated microtubule pair is comparable to the molecular motor stepping speed. In contrast, the net extension in dense 2D active nematics is significantly slower; the interfilament sliding speeds are widely distributed about the average and the filaments exhibit both contractile and extensile relative motion. These measurements highlight the challenge of connecting the extension rate of isolated bundles to the multimotor and multifilament interactions present in a dense 2D active nematic. Furthermore, they also provide quantitative data that is essential for building multiscale models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hardware Design and Demonstration of a 100kW, 99% Efficiency Dual Active Half Bridge Converter Based on 1700V SiC Power MOSFET

High efficiency, high density and galvanically isolated power converters are attractive for numerous medium voltage high power applications. This paper presents a 1.5kVdc, 100kW bidirectional Dual Active Half Bridge (DAHB) using newly developed 1.7kV SiC MOSFET modules. The DAHB achieved an efficiency of 98.6% at full load of 100kW and a maximum of 99% at 45kW, operating as an isolated DC/DC converter. The converter also achieved an efficiency of 97.8% operating as an isolated DC/AC inverter. An optimized PCB-based busbar design has significantly reduced the voltage overshoot across the device, making the design suitable for 1500Vdc input application such as 1500V PV inverters. Typical partial discharge inception voltage (PDIV) of the optimized PCB busbar is 1.7kVpeak with total charge <10pC. The power density of the DAHB converter is 1.8MVA/m 3 which is much higher than traditional two-stage industry products. The DAHB converter can be used as a building block for a 4.16kV/1MVA utility scale PV systems with input parallel and output series configuration.

Xu, Wei↗

Laser Cutting and Micromachining for Localized and Targeted Solar Cell Characterization

Laser cutting and micromachining can be applied to solar cell materials for processing and characterization applications. An ultrashort pulse (USP) laser with sub-picosecond pulse width can remove material with minimal thermal effects or damage, which is termed `cold ablation'. Such USP laser cutting and scribing can be implemented for isolating areas within a larger cell while maintaining electrical performance and preventing laser-induced damage and shunting. Laser micromachining has been used to isolate a shunt to improve cell performance and to isolate a small, selected area to define a sample suitable for deep level transient spectroscopy.

14 SOLAR ENERGY↗

Intra‐species genetic variability drives carbon metabolism and symbiotic host interactions in the ectomycorrhizal fungus Pisolithus microcarpus

Summary Ectomycorrhizal (ECM) fungi are integral to boreal and temperate forest ecosystem functioning and nutrient cycling. ECM fungi, however, originate from diverse saprotrophic lineages and the impacts of genetic variation across species, and especially within a given ECM species, on function and interactions with the environment is not well understood. Here, we explore the extent of intra‐species variation between four isolates of the ECM fungus Pisolithus microcarpus , in terms of gene regulation, carbon metabolism and growth, and interactions with a host, Eucalyptus grandis . We demonstrate that, while a core response to the host is maintained by all of the isolates tested, they have distinct patterns of gene expression and carbon metabolism, resulting in the differential expression of isolate‐specific response pathways in the host plant. Together, these results highlight the importance of using a wider range of individuals within a species to understand the broader ecological roles of ECM fungi and their host interactions.

Plett, Krista L.↗

In vitro evidence that the vasorelaxant effects of 2‐nitro‐1‐phenyl‐1‐propanol on rat coronary arteries involve cyclic nucleotide pathways

Abstract The synthetic nitro‐alcohol 2‐nitro‐1‐phenyl‐1‐propanol (NPP) has endothelium‐independent relaxing properties in isolated preparations of rat aorta and mesenteric artery. In this study, we investigated whether the vasodilator effects occur in coronary vessels and explored whether hyperpolarization is involved in the underlying mechanism of NPP‐induced smooth muscle relaxation. The relaxing responses were studied in isolated preparations of the left anterior descending coronary (ADC) and the septal coronary (SC) arteries, which had been previously maintained under sustained contraction induced by the thromboxane A 2 analogue U‐46619. Administered cumulatively, NPP elicited concentration‐dependent vasorelaxation with similar potency in both vessels. The relaxant effect remained unaffected by the nitric oxide synthase inhibitor L‐NAME, the protein kinase C inhibitor bisindolylmaleimide IV and the Rho‐associated protein kinase inhibitor Y‐27632. However, it was significantly diminished by the adenylyl cyclase inhibitor MDL‐12,330A, the guanylyl cyclase inhibitor ODQ, as well as the K + channel inhibitors tetraethylammonium and CsCl. In ADC preparations impaled with intracellular micropipettes, NPP hyperpolarized the vascular preparation. When the isolated preparation was precontracted by 5‐hydroxytryptamine or 80 mM KCl, NPP‐induced relaxation with lower pharmacological potency compared to the vessels contracted by U‐46619. In conclusion, NPP exhibits vasorelaxant effects on rat coronary arteries, likely involving pathways that include cyclic nucleotide production and membrane hyperpolarization.

Vasconcelos‐Silva, Alfredo Augusto↗

Description of Freudenthalidium gen. nov. and Halluxium gen. nov. to Formally Recognize Clades Fr3 and H as Genera in the Family Symbiodiniaceae (Dinophyceae)

The Symbiodiniaceae are a family of marine dinoflagellates known mostly for their endosymbiotic interactions with invertebrates and protists, but facultatively and exclusively free‐living life histories in this family are also evident. A recent systematic revision of the Symbiodiniaceae replaced the clade‐based nomenclature of seven divergent lineages of “ Symbiodinium ” sensu lato with one based on formally described genera. The revised taxonomy was not extended to the whole group because type species to describe a new genus for each of the remaining clades and subclades were lacking. In an effort to characterize benthic habitats of symbiodiniaceans in sediments at Heron Island (Great Barrier Reef, Australia), we isolated >100 monoclonal Symbiodiniaceae cultures. Four of these belonged to Symbiodiniaceae ‘subclade’ Fr3, and three to Clade H, based on nucleotide sequence similarity (ITS2, LSU, cp23S, and mtCOB), representing the first cultures of these taxa. Based on these isolates, we propose two new genera: Freudenthalidium gen. nov. and Halluxium gen. nov., circumscribing Clades Fr3 and H, respectively. Three new species are described: Freudenthalidium heronense , F. endolithicum , and Halluxium pauxillum . Kofoidian tabulations of motile cells confirm previous observations that amphiesmal vesicle arrangements are generally conserved across the family. These descriptions are an important step toward completing the systematic revision of the Symbiodiniaceae. That this contribution was enabled by isolates from an endopsammic habitat highlights the potential of discovering new symbiodiniacean species in the environment, the study of which will lead to a deeper understanding of free‐living versus symbiotic life histories in this ecologically important family of dinoflagellates.

Nitschke, Matthew R.↗

Dynamic Phaeodactylum tricornutum exometabolites shape surrounding bacterial communities

Summary Roles of different ecological classes of algal exometabolites in regulating microbial community composition are not well understood. Here, we identify exometabolites from the model diatom Phaeodactylum tricornutum and demonstrate their potential to influence bacterial abundances. We profiled exometabolites across a time course of axenic algal growth using liquid chromatography–tandem mass spectrometry. We then investigated growth of 12 bacterial isolates on individual‐identified exometabolites. Lastly, we compared responses of a P. tricornutum ‐adapted enrichment community to additions of two contrasting metabolites: selective growth substrate 4‐hydroxybenzoic acid and putative signaling/facilitator molecule lumichrome. We identified 50 P. tricornutum metabolites and found distinct temporal accumulation patterns. Two exometabolites (of 12 tested) supported growth of distinct subsets of bacterial isolates. While algal exudates and algal presence drove similar changes in community composition compared with controls, exogenous 4‐hydroxybenzoic acid addition promoted increased abundances of taxa that utilized it in isolation, and also revealed the importance of factors relating to algal presence in regulating community composition. This work demonstrates that secretion of selective bacterial growth substrates represents one mechanism by which algal exometabolites can influence bacterial community composition and illustrates how the algal exometabolome has the potential to modulate bacterial communities as a function of algal growth.

4-hydroxybenzoic acid↗

Asterocladon ednae sp. nov. (Asterocladales, Phaeophyceae) from the Philippines

SUMMARY Members of the brown algal order Asterocladales are characterized by stellate arrangement of its chloroplasts, in which a stellate configuration has a protruding central pyrenoid complex. The order is represented by the genus Asterocladon , which consists of only three species so far. Similar to other small and filamentous seaweeds, studies on Asterocladon remain scant and their diversity poorly understood. To fill this gap, we conducted molecular‐assisted taxonomic studies on Asterocladon based on seven culture isolates collected from Okinawa Prefecture, Japan and Cebu, the Philippines. One culture isolate from the Philippines was revealed to be a new species of Asterocladon based on morpho‐anatomical and molecular analyses using rbc L and psa A genes and is described here as Asterocladon ednae . The other isolates were attributed to A. rhodochortonoides . A. ednae was most closely related to A. rhodochortonoides in morphology and molecular phylogeny but was distinguished from the latter by its elongately ellipsoid plurilocular sporangia. This is the first report of the genus and species A. ednae in the Philippines, further increasing the diversity of seaweeds in the country.

Sasagawa, Eriko↗

Synergistic Flow-Induced Oscillation of Multiple Cylinders in Harvesting Marine Hydrokinetic Energy

Abstract Flow-induced oscillations/vibrations (FIO/V) of cylinders in tandem can be enhanced by proper in-flow spacing to increase hydrokinetic energy harnessing. In a farm of multiple cylinders in tandem, the effect of interference on harnessing efficiency arises. Three years of systematic experiments in the Marine Renewable Laboratory (MRELab) of the University of Michigan, on an isolated cylinder, and two and three cylinders in tandem have revealed that synergistic FIO can enhance oscillations of cylinders in close proximity. Two cylinders in tandem can harness 2.5–13.5 times the hydrokinetic power of one isolated cylinder. Three cylinders in tandem can harness 3.4–26.4 times the hydrokinetic power of one isolated cylinder. Negative impact on the harnessed energy by multiple cylinders, such as the shielding effect for the downstream cylinder/s, is possible. Specifically for the three-cylinder configuration, at a certain flow speed, the decrease in the power of the middle cylinder can be overcome by adjusting its stiffness and/or damping.

Engineering↗

Characterization of the SARS-CoV-2 B.1.621 (Mu) variant

The SARS-CoV-2 B.1.621 (Mu) variant emerged in January 2021 and was categorized as a variant of interest by the World Health Organization in August 2021. This designation prompted us to study the sensitivity of this variant to antibody neutralization. In a live virus neutralization assay with serum samples from individuals vaccinated with the Pfizer/BioNTech or Moderna mRNA vaccines, we measured neutralization antibody titers against B.1.621, an early isolate (spike 614D), and a variant of concern (B.1.351, Beta variant). We observed reduced neutralizing antibody titers against the B.1.621 variant (3.4- to 7-fold reduction, depending on the serum sample and time after the second vaccination) compared to the early isolate and a similar reduction when compared to B.1.351. Likewise, convalescent serum from hamsters previously infected with an early isolate neutralized B.1.621 to a lower degree. Despite this antibody titer reduction, hamsters could not be efficiently rechallenged with the B.1.621 variant, suggesting that the immune response to the first infection is adequate to provide protection against a subsequent infection with the B.1.621 variant.

59 BASIC BIOLOGICAL SCIENCES↗

Phenotypic and genomic characterization of Methanothermobacter wolfeii strain BSEL, a CO 2 -capturing archaeon with minimal nutrient requirements

A new variant of Methanothermobacter wolfeii was isolated from an anaerobic digester using enrichment cultivation in anaerobic conditions. Here, the new isolate was taxonomically identified via 16S rRNA gene sequencing and tagged as M. wolfeii BSEL. The whole genome of the new variant was sequenced and de novo assembled. Genomic variations between the BSEL strain and the type strain were discovered, suggesting evolutionary adaptations of the BSEL strain that conferred advantages while growing under a low concentration of nutrients. M. wolfeii BSEL displayed the highest specific growth rate ever reported for the wolfeii species (0.27 ± 0.03 h –1 ) using carbon dioxide (CO 2 ) as unique carbon source and hydrogen (H 2 ) as electron donor. M. wolfeii BSEL grew at this rate in an environment with ammonium (NH 4 + ) as sole nitrogen source. The minerals content required to cultivate the BSEL strain was relatively low and resembled the ionic background of tap water without mineral supplements. Optimum growth rate for the new isolate was observed at 64°C and pH 8.3. In this work, it was shown that wastewater from a wastewater treatment facility can be used as a low-cost alternative medium to cultivate M. wolfeii BSEL. Continuous gas fermentation fed with a synthetic biogas mimic along with H 2 in a bubble column bioreactor using M. wolfeii BSEL as biocatalyst resulted in a CO 2 conversion efficiency of 97% and a final methane (CH 4 ) titer of 98.5%v, demonstrating the ability of the new strain for upgrading biogas to renewable natural gas.

09 BIOMASS FUELS↗

Bacterial Secondary Metabolite Biosynthetic Potential in Soil Varies with Phylum, Depth, and Vegetation Type

Microbes produce specialized compounds to compete or communicate with one another and their environment. Some of these compounds, such as antibiotics, are also useful in medicine and biotechnology. Historically, most antibiotics have come from soil bacteria which can be isolated and grown in the lab. Though the vast majority of soil bacteria cannot be isolated, we can extract their genetic information and search it for genes which produce these specialized compounds. These understudied soil bacteria offer a wealth of potential for the discovery of new and important microbial products. Here, we identified the ability to produce these specialized compounds in diverse and novel bacteria in a range of soil environments. This information will be useful to other researchers who wish to isolate certain products. Beyond their use to humans, understanding the distribution and function of microbial products is key to understanding microbial communities and their effects on biogeochemical cycles.

59 BASIC BIOLOGICAL SCIENCES↗

Advantages and Limits of Metagenomic Assembly and Binning of a Giant Virus

ABSTRACT Giant viruses have large genomes, often within the size range of cellular organisms. This distinguishes them from most other viruses and demands additional effort for the successful recovery of their genomes from environmental sequence data. Here, we tested the performance of genome-resolved metagenomics on a recently isolated giant virus, Fadolivirus, by spiking it into an environmental sample from which two other giant viruses were isolated. At high spike-in levels, metagenome assembly and binning led to the successful genomic recovery of Fadolivirus from the sample. A complementary survey of the major capsid protein indicated the presence of other giant viruses in the sample matrix but did not detect the two isolated from this sample. Our results indicate that genome-resolved metagenomics is a valid approach for the recovery of near-complete giant virus genomes given that sufficient clonal particles are present. However, our data also underline that a vast majority of giant viruses remain currently undetected, even in an era of terabase-scale metagenomics. IMPORTANCE The discovery of large and giant nucleocytoplasmic large DNA viruses (NCLDV) with genomes in the megabase range and equipped with a wide variety of features typically associated with cellular organisms was one of the most unexpected, intriguing, and spectacular breakthroughs in virology. Recent studies suggest that these viruses are highly abundant in the oceans, freshwater, and soil, impact the biology and ecology of their eukaryotic hosts, and ultimately affect global nutrient cycles. Genome-resolved metagenomics is becoming an increasingly popular tool to assess the diversity and coding potential of giant viruses, but this approach is currently lacking validation.

59 BASIC BIOLOGICAL SCIENCES↗

Multifactorial genetic control and magnesium levels govern the production of a Streptomyces antibiotic with unusual cell density dependence

Streptomyces bacteria are renowned both for their antibiotic production capabilities and for their cryptic metabolic potential. Their metabolic repertoire is subject to stringent genetic control, with many of the associated biosynthetic gene clusters being repressed by the conserved nucleoid-associated protein Lsr2. In an effort to stimulate new antibiotic production in wild Streptomyces isolates, we leveraged the activity of an Lsr2 knockdown construct and successfully enhanced antibiotic production in the wild Streptomyces isolate WAC07094. We determined that this new activity stemmed from increased levels of the angucycline-like family member saquayamycin. Saquayamycin has both antibiotic and anti-cancer activities, and intriguingly, beyond Lsr2-mediated repression, we found saquayamycin production was also suppressed at high density on solid or in liquid growth media; its levels were greatest in low-density cultures. This density-dependent control was exerted at the level of the cluster-situated regulatory gene sqnR and was mediated in part through the activity of the PhoRP two-component regulatory system, where deleting phoRP led to both constitutive antibiotic production and sqnR expression. This suggests that PhoP functions to repress the expression of sqnR at high cell density. We further discovered that magnesium supplementation could alleviate this density dependence, although its action was independent of PhoP. Finally, we revealed that the nitrogen-responsive regulators GlnR and AfsQ1 could relieve the repression exerted by Lsr2 and PhoP. Intriguingly, we found that this low density-dependent production of saquayamycin was not unique to WAC07094; saquayamycin production by another wild isolate also exhibited low-density activation, suggesting that this spatial control may serve an important ecological function in their native environments.

59 BASIC BIOLOGICAL SCIENCES↗

Distinguishing Leptothrix and Sphaerotilus genera by an integrated genomic-phenotypic analysis supported by new Leptothrix genomes

The Sphaerotilus-Leptothrix group of bacteria includes one of the first described microorganisms, Leptothrix ochracea, an uncultured type strain, plus isolates of Leptothrix and Sphaerotilus. This group is unified by the ability to form sheaths and oxidize metals, although L. ochracea exhibits obvious ecological, morphological, and functional differences from the rest of Sphaerotilus-Leptothrix. Recently, there have been calls to combine the group into one genus, Sphaerotilus; however, these studies lacked adequate genomic representation of L. ochracea. Here, we present a comprehensive comparative genomic analysis of the Sphaerotilus-Leptothrix group, including expanded representation of L. ochracea, a closely related novel species, Leptothrix toolikensis, and two new isolates (Leptothrix mechoopdaensis). Analysis of 38 genomes resolves three phylogenetic and functional groups: the ochracea-type Leptothrix (Group 1), the mobilis-type Leptothrix (Group 2), and Sphaerotilus (Group 3). Group 1 genomes form a separate genus based on average nucleotide identity and alignment fraction. The genomes clearly diverge from the rest of Sphaerotilus-Leptothrix in phylogeny, size, and metabolic potential. Group 1 genomes are much smaller (2.59–3.04 Mb) than those of Groups 2 (4.55–6.06 Mb) and 3 (3.94–5.07 Mb), while encoding more metal oxidases and fewer carbohydrate-active enzymes. Group 2 clusters with Group 3 phylogenetically and is similar in organic carbon metabolisms but maintains more metal oxidation genes. Group 2 members lack homogeneity in phenotype and genotype, suggesting that additional isolates and genomes are needed for confident classification. However, Group 1 genomes (L. ochracea and L. toolikensis) show clear divergence, precluding their inclusion in Sphaerotilus and supporting the retention of the genus Leptothrix.

Leptothrix↗

The diphoton $$q_T$$ spectrum at N$$^3$$LL$$^\prime $$ + NNLO

Abstract We present a $$q_T$$ q T -resummed calculation of diphoton production at order N $$^3$$ 3 LL $$^\prime $$ ′ + NNLO. To reach the primed level of accuracy we have implemented the recently published three-loop $${\mathcal {O}}(\alpha _s^3)$$ O ( α s 3 ) virtual corrections in the $$q\bar{q}$$ q q ¯ channel and the three-loop transverse momentum dependent beam functions and combined them with the existing infrastructure of , a code performing resummation at order N $${}^3$$ 3 LL. While the primed predictions are parametrically not more accurate, one typically observes from lower orders and other processes that they are the dominant effect of the next order. We include in both the $$q\bar{q}$$ q q ¯ and loop-induced gg channel the hard contributions consistently together at order $$\alpha _s^3$$ α s 3 and find that the resummed $$q\bar{q}$$ q q ¯ channel without matching stabilizes indeed. Due to large matching corrections and large contributions and uncertainties from the gg channel, the overall improvements are small though. We furthermore study the effect of hybrid-cone photon isolation and hard-scale choice on our fully matched results to describe the ATLAS $$\text {8}$$ 8 TeV data and find that the hybrid-cone isolation worsens agreement at small $$q_T$$ q T compared to smooth-cone isolation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Autonomous Anomaly Detection For Continuous Streams

The code implements the Isolation Forest (IFML) algorithm within the digital twin (DT) of the AGN-201 nuclear reactor. The DT captures real-time operational data including control rod positions, reactor power, and temperature. The IFML model isolates anomalies by detecting patterns that deviate from expected operational behavior. The algorithm recursively partitions the data and assigns anomaly scores based on the isolation of rare and different events. By tuning parameters specific to the reactor’s operational data, the IFML identifies deviations such as unauthorized material insertions or reactor reactivity shifts. The system streams data using LabView and integrates with the DeepLynx data warehouse for anomaly processing.

Trevino, Eduardo↗

Experiment of Sea Breeze Convection, Aerosols, Precipitation, and Environment (ESCAPE)

Convective clouds play an important role in Earth’s climate system and are a known source of extreme weather. Gaps in our understanding of convective vertical motions, microphysics, and precipitation across a full range of aerosol and meteorological regimes continue to limit our ability to predict the occurrence and intensity of these cloud systems. To improve predictability, the National Science Foundation (NSF) sponsored a large field experiment entitled “Experiment of Sea Breeze Convection, Aerosols, Precipitation, and Environment (ESCAPE).” ESCAPE took place between 30 May and 30 September 2022 in the vicinity of Houston, Texas, because this area frequently experiences isolated deep convection that interacts with the region’s mesoscale circulations and its range of aerosol conditions. ESCAPE focused on collecting observations of isolated deep convection through innovative sampling and developing novel analysis techniques. This included the deployment of two research aircraft, the National Research Council of Canada Convair-580 and the Stratton Park Engineering Company Learjet, which combined conducted 24 research flights from 30 May to 17 June. On the ground, three mobile X-band radars and one mobile Doppler lidar truck equipped with soundings were deployed from 30 May to 28 June. From 1 August to 30 September 2022, a dual-polarization C-band radar was deployed and operated using a novel, multisensor agile adaptive sampling strategy to track the entire life cycle of isolated convective clouds. Analysis of the ESCAPE observations has already yielded preliminary findings on how aerosols and environmental conditions impact the convective life cycle.

54 ENVIRONMENTAL SCIENCES↗