Search NASA⌕ Search

SEARCH · Search NASA

Results for “performance study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy

Microstructure formation of a hypo-eutectic Al-11Cu (atom percent) alloy during solidification after laser melting has been studied by transmission electron microscopy (TEM). The evolution of the solid-liquid-interface velocity, V SL , during the solidification process has been determined from direct observation by in-situ TEM. This enabled correlating V SL with development of four distinct microstructure zones. Crystal growth mode transitions from planar to cellular, cellular to dendritic, dendritic to cellular, and cellular to planar, have been observed for the accelerating solid-liquid-interface. The transition from coupled two-phase growth to the single-phase growth occurred for V SL = V a = (0.80±0.05) m/s, where V a is the velocity of absolute stability, at the onset of banded morphology grain formation. The in-situ and post-mortem TEM uniquely permitted determination of the non-equilibrium solidus for the rapidly solidifying Al-11Cu alloy. Experimental evidence for solute clustering and chemical ordering tendencies at length scales on the order of ≤ 5nm has been detected in the single-phase regions of the banded grains. The structural features of the single-phase bands have been interpreted as signatures of ‘frozen in’ configurations present in the liquid boundary layer adjacent to the growing crystal, which has a width of about 3nm. Finally, the nano-scale spatiotemporal resolution experimental TEM studies performed here provided quantitative metrics, e.g. the solidification interface velocity dependent solute concentration of the α-Al phase and the near-atomic scale structure in the single-phase bands, that are uniquely suitable for comparison with theory and model predictions for solidification microstructure development in multicomponent alloys after laser melting.

36 MATERIALS SCIENCE↗

Modelling wind power spatial-temporal correlation in multi-interval optimal power flow: A sparse correlation matrix approach

The significantly increasing deployment of wind power necessitates that system operation considers the spatial-temporal correlation of power forecast from different wind power plants. How to model this spatial-temporal correlation in the actual system dispatch is challenging. In this paper, a sparse correlation matrix is utilized to efficiently model the spatial-temporal correlation of wind power forecast in the generation dispatch model. A novel, adjustable, and distributionally-robust chance-constrained multi-interval optimal power flow (ADRCC-MIOPF) model is proposed to obtain reliable economic dispatch (ED) solutions. The spatial-temporal correlation of wind power plants power forecasts is represented by the sparse correlation covariance matrix obtained from historical, time series wind power forecast error data. The chance constraints in the ADRCC-MIOPF model are transformed into a set of second-order-cone (SOC) constraints in which an adjustable coefficient in the chance constraints controls the robustness of the ADRCC-MIOPF model to the wind power forecast errors distribution. Case studies performed on the PJM 5-bus system and IEEE 118-bus system verify the proposed method to improve the system security and reduce the cost especially under the high wind penetration levels. All the cases can be solved within several minutes for both the small and large cases which validates the efficiency of the proposed sparse matrix model. In addition, considering the spatial-temporal correlation of wind power forecast and the distributional robustness of wind power forecast error leads to a more reliable economic dispatch with lower system violations.

17 WIND ENERGY↗

A computer vision algorithm for interpreting lacustrine carbonate textures at Searles Valley, USA

Investigations of the paleohydrologies of pluvial lake systems have often employed lake carbonate deposits called “tufa” that grow subaqueously and can be preserved long after the drying of the lake. For this reason, tufa have been used as a proxy for minimum lake level. However, they exhibit a variety of textures that hold the potential to reveal richer paleoclimatological information. With the goal of determining if tufa texture can be used as a proxy for lake environment, this study investigates the textures of tufa at Mono Lake, California in comparison to the fossil tufa in Searles Valley, California. While observations in the last century suggest that the tufa in the Mono basin grew in waters similar to the modern, the tufa at Searles formed during the last glacial period, when the Great Basin contained a system of pluvial lakes on the scale of the modern Great Lakes. The tufa at both basins have been observed to have a range of classifiable textures, and new methods of inspecting visual data could be informative about what factors control these textures. To this end, a t-Distributed Stochastic Neighbor Embedding (t-SNE) algorithm is used to project images of the tufa at Searles and Mono into a coordinate space, allowing for simple, quantitative comparisons of the visual similarity of textures. In this work, the textures of tufa at Searles are compared to each other, as well as to the tufa at Mono. This study performs a robust assessment of the feasibility of Mono Lake as a modern analogue for Searles Valley. It finds that there is a justifiable basis for the comparison of certain fossil facies at Searles to the tufa at Mono, significant progress towards the goal of using texture as a metric for the environment in which tufa formed.

58 GEOSCIENCES↗

Resilient cooling strategies – A critical review and qualitative assessment

The global effects of climate change will increase the frequency and intensity of extreme events such as heatwaves and power outages, which have consequences for buildings and their cooling systems. Buildings and their cooling systems should be designed and operated to be resilient under such events to protect occupants from potentially dangerous indoor thermal conditions. This study performed a critical review on the state-of-the-art of cooling strategies, with special attention to their performance under heatwaves and power outages. We proposed a definition of resilient cooling and described four criteria for resilience—absorptive capacity, adaptive capacity, restorative capacity, and recovery speed —and used them to qualitatively evaluate the resilience of each strategy. The literature review and qualitative analyses show that to attain resilient cooling, the four resilience criteria should be considered in the design phase of a building or during the planning of retrofits. The building and relevant cooling system characteristics should be considered simultaneously to withstand extreme events. A combination of strategies with different resilience capacities, such as a passive envelope strategy coupled with a low-energy space-cooling solution, may be needed to obtain resilient cooling. Finally, a further direction for a quantitative assessment approach has been pointed out.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

An interregional optimization approach for time series aggregation in continent-scale electricity system models

Modeling electric power systems with high shares of weather-dependent resources requires tradeoffs between temporal, spatial, and operational resolution. Many studies perform time series aggregation using clustering algorithms to reduce the temporal dimension, but when modeling continent-scale electricity systems that are large enough to contain multiple independent weather systems, this approach requires large numbers of representative periods to minimize errors in regional wind and solar capacity factors. Here, a new optimization-based approach for representative period selection and weighting is introduced that minimizes regional errors in average renewable capacity factors and electricity demand. The method delivers higher regional fidelity with fewer representative periods than alternative clustering methods when applied to wind, solar, and demand profiles for the contiguous United States. When representative periods are selected from multiple weather years, the optimized method reproduces regional averages with lower error than a complete 365-day time series from any single weather year. The method identifies only representative (as opposed to outlying) periods but can be combined with an iterative "stress period" identification approach to guide efficient decision-making considering both average and high-risk weather conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Comparison of personal radio frequency electromagnetic field exposure in different urban areas across Europe

Background: Only limited data are available on personal radio frequency electromagnetic field (RF-EMF) exposure in everyday life. Several European countries performed measurement studies in this area of research. However, a comparison between countries regarding typical exposure levels is lacking. Objectives: To compare for the first time mean exposure levels and contributions of different sources in specific environments between different European countries. Methods: In five countries (Belgium, Switzerland, Slovenia, Hungary, and the Netherlands), measurement studies were performed using the same personal exposure meters. The pooled data were analyzed using the robust regression on order statistics (ROS) method in order to allow for data below the detection limit. Mean exposure levels were compared between different microenvironments such as homes, public transports, or outdoor. Results: Exposure levels were of the same order of magnitude in all countries and well below the international exposure limits. In all countries except for the Netherlands, the highest total exposure was measured in transport vehicles (trains, car, and busses), mainly due to radiation from mobile phone handsets (up to 97%). Exposure levels were in general lower in private houses or flats than in offices and outdoors. At home, contributions from various sources were quite different between countries. Conclusions: Highest total personal RF-EMF exposure was measured inside transport vehicles and was well below international exposure limits. This is mainly due to mobile phone handsets. Mobile telecommunication can be considered to be the main contribution to total RF-EMF exposure in all microenvironments.

60 APPLIED LIFE SCIENCES↗

Pesticide use in banana and plantain production and risk perception among local actors in Talamanca, Costa Rica

The Talamanca County in Costa Rica has large-scale banana and small-scale plantain production, probably causing pesticide exposure in indigenous children. We explored to what extent different community actors are aware of children's pesticide hazards and how their awareness related to socio-economical and cultural conditions. Methods comprised eight focus groups with fathers and mothers separately, 27 semi-structured interviews to key actors, and field observations. As a whole, the indigenous plantain farmers and banana plantation workers had some general knowledge of pesticides concerning crop protection, but little on acute health effects, and hardly any on exposure routes and pathways, and chronic effects. People expressed vague ideas about pesticide risks. Inter-community differences were related to pesticide technologies used in banana and plantain production, employment status on a multinational plantation versus smallholder status, and gender. Compared to formalized practices on transnational company plantations, where workers reported to feel protected, pesticide handling by plantain smallholders was not perceived as hazardous and therefore no safety precautions were applied. Large-scale monoculture was perceived as one of the most important problems leading to pesticide risks in Talamanca on banana plantations, and also on neighboring small plantain farms extending into large areas. Plantain farmers have adopted use of highly toxic pesticides following banana production, but in conditions of extreme poverty. Aerial spraying in banana plantations was considered by most social actors a major determinant of exposure for the population living nearby these plantations, including vulnerable children. We observed violations of legally established aerial spraying distances. Economic considerations were most mentioned as the underlying reason for the pesticide use: economic needs to obtain the production quantity and quality, and pressure to use pesticides by other economic agents such as middlemen. Risk perceptions were modulated by factors such as people's tasks and positions in the production process, gender, and people's possibilities to define their own social conditions (more fatalistic perceptions among banana workers). The challenge for the future is to combine these insights into improved health risk assessment and management that is culturally adequate for each particular community and agricultural context. - Research highlights: {yields} A first study on pesticide risk perception in Costa Rica. {yields} One of the few studies performed in the indigenous populations in Talamanca. {yields} Economic considerations prevailed above health risks in both communities. {yields} Our findings provide valuable information for multiple social actors.

60 APPLIED LIFE SCIENCES↗

Results of lifespan exposure to continuous and intermittent extremely low frequency electromagnetic fields (ELFEMF) administered alone to Sprague Dawley rats

Highlights: • Carcinogenic effects of ELFEMF whole-body chronic exposure were evaluated on rats. • Exposure to ELFEMF alone does not represent risk factor for neoplastic development. • ELFEMF might act as a cancer enhancer if co-administered to other known carcinogens. Up to now, experimental studies on rodents have failed to provide definitive confirmation of the carcinogenicity of extremely low frequency electromagnetic fields (ELFEMF). Two recent studies performed in our laboratory on Sprague-Dawley rats reported a statistically significant increase in malignant tumors of different sites (mammary gland, C-cells carcinoma, hemolymphoreticular neoplasia, and malignant heart Schwannoma) when ELFEMF exposure was associated with exposure to formaldehyde (50 mg/l) or acute low dose of γ-radiation (0.1 Gy) (Soffritti et al., 2016a) (Soffritti et al., 2016b). The same doses of known carcinogenic agents (50 mg/l formaldehyde, or acute 0.1 Gy γ-radiation), when administered alone, previously failed to induce any statistically significant increase in the incidence of total and specific malignant tumors in rats of the same colony.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Quantifying the Reproducibility of Heart Position During Treatment and Corresponding Delivered Heart Dose in Voluntary Deep Inhalation Breath Hold for Left Breast Cancer Patients Treated With External Beam Radiotherapy

Purpose: Voluntary deep inhalation breath hold (VDIBH) reduces heart dose during left breast irradiation. We present results of the first study performed to quantify reproducibility of breath hold using bony anatomy, heart position, and heart dose for VDIBH patients at treatment table. Methods and Materials: Data from 10 left breast cancer patients undergoing VDIBH whole-breast irradiation were analyzed. Two computed tomography (CT) scans, free breathing (FB) and VDIBH, were acquired to compare dose to critical structures. Pretreatment weekly kV orthogonal images and tangential ports were acquired. The displacement difference from spinal cord to sternum across the isocenter between coregistered planning Digitally Reconstructed Radiographs (DRRs) and kV imaging of bony thorax is a measure of breath hold reproducibility. The difference between bony coregistration and heart coregistration was the measured heart shift if the patient is aligned to bony anatomy. Results: Percentage of dose reductions from FB to VDIBH: mean heart dose (48%, SD 19%, p = 0.002), mean LAD dose (43%, SD 19%, p = 0.008), and maximum left anterior descending (LAD) dose (60%, SD 22%, p = 0.008). Average breath hold reproducibility using bony anatomy across the isocenter along the anteroposterior (AP) plane from planning to treatment is 1 (range, 0-3; SD, 1) mm. Average heart shifts with respect to bony anatomy between different breath holds are 2 {+-} 3 mm inferior, 1 {+-} 2 mm right, and 1 {+-} 3 mm posterior. Percentage dose changes from planning to delivery: mean heart dose (7%, SD 6%); mean LAD dose, ((9%, SD 7%)S, and maximum LAD dose, (11%, SD 11%) SD 11%, p = 0.008). Conclusion: We observed excellent three-dimensional bony registration between planning and pretreatment imaging. Reduced delivered dose to heart and LAD is maintained throughout VDIBH treatment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

In-situ evaluation for upgrading of biomass over noble metal catalysts by isotopic tracing and NMR monitoring

One of the key challenges in studying the upgrading processes for the conversion of biomass is developing an understanding of the underlying conversion mechanism at the atomic scale. This study proposed an innovative high pressure in situ NMR monitoring approach for an isotopic traced upgrading process, which demonstrated a powerful capability to identify key products and provide insights into the reaction structure. The investigations for ring opening of two basic model compounds – methylcyclopentane (MCP) and cyclohexane (CH) on Ir, Pt, Ru and Pd/γ-Al 2 O 3 at 55 and 110 °C have been accomplished. For the study performed at 110 °C on Ir, Pt and Ru catalysts, the trend of H/D exchange rates were clearly dependent on the position on the ring with the highest exchange rate for the unhindered (or open side) and the lowest rate with the methyl group. However, Pd could perform almost equally efficient H/D exchanges for all sides, which may indicate that the “turnover” reactions could also occur on Pd. For both MCP and CH, Ru performed the most efficient H/D exchanges (C–H bond activation), and ring opened products were only observed with the Ru catalyst at 110 °C suggesting it is the most promising ring opening catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of structural and magnetic properties of rapidly-solidified iron-silicon alloys at ambient and elevated temperatures

In this work, we investigated the ambient temperature structural properties (~300 K) and the ambient and high temperature (up to 900 K) direct current (DC) magnetic properties of melt-spun Fe-x wt.% Si (x = 3, 5, & 8) alloys. The wheel surface speeds selected for the study were 30 m/s and 40 m/s. The thickness, width, lattice parameter, saturation magnetization (MS), and intrinsic coercivity (HCI) of the melt spun ribbons are presented and compared with data in the literature. The ribbons produced at the lower wheel surface speed (30 m/s) were continuous having relatively uniform edges compared to the ribbons produced at the higher wheel surface speed. The thickness and the width of the melt-spun ribbons ranged between ~15-60 μm and 500-800 μm, respectively. The x-ray diffraction spectra of the melt-spun ribbons indicated the presence of disordered α-phase, irrespective of the composition, and the wheel-surface speed. The lattice parameter decreased gradually as a function of increasing silicon content from ~0.2862 nm (Fe-3 wt.% Si) to ~0.2847 nm (Fe-8 wt.% Si). Wheel surface speed was not shown to have a significant effect on the magnetization, but primarily impacted the ribbon structure. A decreasing trend in the saturation magnetization was observed as a function of increased silicon content. The intrinsic coercivity of the melt-spun alloys ranged between ~50 to 200 A/m. Elevated temperature evaluation of the magnetization in the case of Fe-3 & 5 wt.% Si alloy ribbons was distinctly different from the Fe-8 wt.% Si alloy ribbons. The curves of the as-prepared Fe-3 wt.% Si and Fe-5 wt.% Si alloy ribbons were irreversible while that of Fe-8 wt.% Si was reversible. The MS for any of the combinations of wheel surface speed and composition decreased monotonically with the increase in temperature (from 300 – 900 K). The percentage decrease in MS from 300 K to 900 K for the Fe-3 wt.% Si and Fe-5 wt.% Si alloys was ~19-22 %, while the percentage decrease in the same temperature range for Fe-8 wt.% Si alloy was ~26-30 %. It appears that Fe-3 wt.% Si and Fe-5 wt.% Si alloys ribbons are primarily comprised of the α phase (disordered phase) with any minor constituents being beyond the detection limits of the studies performed, while the Fe-8 wt.% Si alloy ribbons are comprised of disordered and regions of short-range ordering.

Elevated Temperature↗

Jacobian-free Newton–Krylov method for the simulation of non-thermal plasma discharges with high-order time integration and physics-based preconditioning

A preconditioning framework for the numerical simulation of non-thermal streamer discharges is developed using the Jacobian-free Newton-Krylov (JFNK) method. A reduced plasma fluid model is considered, consisting of electrons, one positive ion, one negative ion, and the electrostatic potential. Here, the plasma kinetics model includes ionization, electron-ion recombination, electron attachment, electron detachment, and ion-ion recombination. The governing equations are made dimensionless, discretized in space with finite differences, and integrated in time with a fully implicit method based on high-order backward differentiation formulas. The preconditioning framework is based on a linearized form of the governing equations and physics-based operator splitting. The efficiency of the preconditioning strategy is assessed through two test cases: streamer propagation between parallel plates and an axisymmetric pin-to-pin discharge. The fully implicit approach overcomes traditional restrictions in the time step size due to processes such as electron drift, electron diffusion, and dielectric relaxation. Excellent performance is observed through relevant statistics of the JFNK solver, although the number of linear iterations increases for the pin-to-pin discharge when nonlinear numerical boundary conditions are imposed at the electrodes. Performance studies show scalability with O(100-1000) processors for O(10M) unknowns with ample room for optimization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Representative Doses to Members of the Public from Atmospheric Releases of 131I at the Mayak Production Association Facilities from 1948 through 1972

Scoping epidemiologic studies performed by researchers from the Southern Urals Biophysics Institute revealed an excess prevalence of thyroid nodules and an increased incidence of thyroid cancer among residents of Ozersk, Russia, who were born in the early 1950s. Ozersk is located about 5 km from the facilities where the Mayak Production Association produced nuclear materials for the Russian weapons program. Reactor operations began in June 1948 and chemical separation of plutonium from irradiated fuel began in February 1949. The U.S.–Russia Joint Coordinating Committee on Radiation Effects Research conducted a series of projects over a 10-year period to assess the radiation risks in the Southern Urals. This paper uses data collected under Committee projects to reconstruct individual time-dependent thyroid doses to reference individuals living in Ozersk from 131I released to the atmosphere. Between 3.22×1016 and 4.31×1016 Bq of 131I released may have been released during the 1948–1972 time period, and a best estimate is 3.76×1016 Bq. A child born in 1947 is estimated to have received a cumulative thyroid dose of 2.3 Gy for 1948–1972, with a 95% confidence interval of 0.51–7.3 Gy. Annual doses were the highest in 1949 and a child who was 5 years old in 1949 is estimated to have a received an annual thyroid dose of 0.93 Gy with a 95% confidence interval of 0.19–3.5 Gy.

Mayak↗

Second order incommensurate phase transition in 25L-Ta{sub 2}O{sub 5}

A new structural state 25L-Ta{sub 2}O{sub 5}, obtained from sintering and annealing treatments of a Ta{sub 2}O{sub 5} powder, is identified both by electron diffraction and high resolution imaging on a transmission electron microscope (TEM). According to general rules for the different L-Ta{sub 2}O{sub 5} structures proposed by Grey et al. (J. Solid State Chem. 178 (2005) 3308), a structural model is derived from their crystallographic data on 19L-Ta{sub 2}O{sub 5}. This model yields simulated images in agreement with high resolution TEM observations of the structure oriented along its [001] zone axis, but only for a very thin crystal thickness of less than 1.2 nm. Such a limitation is shown to be due to a modulation of the structure along its [001] axis. Actually, from an analysis of a diffuse scattering and of its evolution into satellites reflections as a function of the cooling rate, a second order incommensurate phase transition can be assumed to occur in this compound. The property of single phase samples observed by TEM is also verified by X-ray powder diffraction. In a discussion about studies performed by different authors on incommensurate structures in the system Ta{sub 2}O{sub 5}-WO{sub 3}, it is noticed that TEM results, similar to ours, indicate that phase transitions could be expected in these structures. - Graphical Abstract: Electron diffraction patterns of [100] zone axis, showing a structural change of the 25L-Ta{sub 2}O{sub 5} phase through a variation of the cooling rate from 1000 {sup o}C.

36 MATERIALS SCIENCE↗

Structure and electronic properties of a Mn nanowire encapsulated in carbon nanotubes

First-principles calculations using density functional theory are performed studying the stability and the electronic structure of an one-dimensional chain of Mn atoms as a nanowire encapsulated in a single-walled (5,5) armchair carbon nanotube. The results show a ferromagnetic ground state for a dimerized nanowire where the interatomic Mn–Mn distance is 2.65 Å and the interdimer separation is 3.40 Å. The average Mn moment is 4.35μ B . A charge transfer from the nanotube to the nanowire is observed. A polarized spin channel is identified for conduction electrons in the filled nanotube. - Graphical abstract: Spin density for a Mn nanowire encapsulated in a carbon nanotube. Highlights: • A Mn nanowire can be stabilized in a single-walled armchair carbon nanotube. • The ground state is ferromagnetic. • The average moment on the Mn atoms is 4.35μ B . • A polarized spin channel is identified for conduction electrons in the filled nanotube.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Studies on the structural, electrical and magnetic properties of LaCrO{sub 3}, LaCr{sub 0.5}Cu{sub 0.5}O{sub 3} and LaCr{sub 0.5}Fe{sub 0.5}O{sub 3} by sol–gel method

Highlights: ► LaCr{sub 0.5}M{sub 0.5}O{sub 3} (M = Cr{sup 3+}, Cu{sup 2+} and Fe{sup 3+}) was synthesized by simple sol–gel technique with subsequent heat treatment. ► The compound formation temperature was optimized through XRD analysis. ► The effects of Cu{sup 2+} and Fe{sup 3+} on the electrical properties of LaCrO{sub 3} were studied using impedance spectroscopy. ► The temperature dependence of electrical conductivity was discussed for LaCr{sub 0.5}Cu{sub 0.5}O{sub 3}. ► The magnetization was found to be enhanced in the LaCr{sub 0.5}Fe{sub 0.5}O{sub 3}. -- Abstract: The structural, electrical and magnetic properties of LaCr{sub 0.5}M{sub 0.5}O{sub 3} (M = Cr{sup 3+}, Cu{sup 2+} and Fe{sup 3+}) synthesized by a sol–gel technique were studied. The X-ray diffraction pattern shows the structure to be orthorhombic and the size of the particles is around 100 nm as seen from the TEM images. The effects of Cu{sup 2+} and Fe{sup 3+} on the electrical properties of LaCrO{sub 3} were studied using impedance spectroscopy at room temperature (RT). The properties of LaCr{sub 0.5}Cu{sub 0.5}O{sub 3} were studied over a wide range of temperature from RT to 533 K. A maximum conductivity of 1.7 × 10{sup −3} S cm{sup −1} was observed for LaCr{sub 0.5}Cu{sub 0.5}O{sub 3} at a measured temperature of 533 K. The impedance spectra indicate a negative temperature coefficient of resistance (NTCR) and also imply the conduction is through bulk of the material. The magnetic studies performed using a SQUID magnetometer interpret the antiferromagnetically ordered LaCrO{sub 3} to behave ferromagnetically on the addition of Cu{sup 2+} and Fe{sup 3+}, and the magnetization was found to be enhanced in the LaCr{sub 0.5}Fe{sub 0.5}O{sub 3}.

36 MATERIALS SCIENCE↗

Characterisation of organic-inorganic hybrid materials of the types ZnxCd1-xSe(1,3-diaminopropane)1/2 and ZnSySe1-y(1,3-diaminopropane)1/2

Highlights: • New hybrid materials: Zn{sub x}Cd{sub 1-x}Se(1,3-DAP){sub 1/2} and ZnS{sub x}Se{sub 1-x}(1,3-DAP){sub 1/2} were obtained. • Hybrids were studied using XRD, TG/DSC, XRD vs. temperature, SEM, UV–vis spectroscopy. • The impact of the composition of the layers on optical properties were studied. - Abstract: Organic-inorganic hybrid materials of the type MeQ(diamine){sub 1/2} (where Me–Zn, Cd, Mn and Q–S, Se, Te) belong to the class of 3D nanomaterials. They are built of layers of II–VI semiconductors and amines, which act as linkers. The main goal of our work was the synthesis of compounds of the type Zn{sub x}Cd{sub 1-x}Se(1,3-diaminopropane){sub 1/2} and ZnS{sub y}Se{sub 1-y}(1,3-diaminopropane){sub 1/2} (where x, y = 0, 0.25, 0.5, 0.75, 1) and the study of properties changed by the composition of the semiconducting layers. Analysis of these materials was carried out with the use of X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), simultaneous thermogravimetry and differential scanning calorimetry (TG-DSC) as well as temperature dependent XRPD enabled us to obtain information about the thermal stability of hybrid compounds with mixed semiconducting layers. Another important part of our work was a study, performed with the use of UV–vis spectroscopy, of the optical properties of these materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗