Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Soybean Oil Modified Bio-based Poly(vinyl alcohol)s via Ring-Opening Polymerization

In this paper, a simple method to modify the poly(vinyl alcohol) (PVA) through ring-opening reaction of epoxidized soybean oil (ESBO), catalyzed by hydrochloric acid is reported. The effect of ESBO loading ratio, in terms of mole (PVA/ESBO (n/n) = 1:0.5; 1:1 and 1:1.5) in the reaction medium, on the biodegradable, wettability and thermal properties of final PVA-SBO films is systematically investigated, comparing with PVA. The formation of PVA-SBOs is structurally confirmed by Fourier transform infrared (FT-IR) spectroscopy, whereas their wettability and thermal properties are studied by water contact angle (WCA) measurement, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC), respectively. The obtained PVA-SBOs with higher ESBO loading exhibit both improved thermal properties and higher hydrophobic characteristic compared to others. Furthermore, biodegradability of resulting PVA-SBOs is also investigated by enzymatic degradation experiments. It is determined that around 34% of PVA is degraded by enzymatic experiments after 30 days and PVA-SBO with lower ESBO loading is more degraded than others with around 52%. Consequently, some experimental results are presented to indicate that PVA-SBOs are encouraging materials for diverse applications and their extensions can be good candidate for reducing the environmental problem and consumption of petroleum resources.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Fast equilibration of coarse-grained polymeric liquids

The study of macromolecular systems may require large computer simulations that are too time consuming and resource intensive to execute in full atomic detail. The integral equation coarse-graining approach by Guenza and co-workers enables the exploration of longer time and spatial scales without sacrificing thermodynamic consistency, by approximating collections of atoms using analytically-derived soft-sphere potentials. Because coarse-grained (CG) characterizations evolve polymer systems far more efficiently than the corresponding united atom (UA) descriptions, we can feasibly equilibrate a CG system to a reasonable geometry, then transform back to the UA description for a more complete equilibration. Automating the transformation between the two different representations simultaneously exploits CG efficiency and UA accuracy. By iteratively mapping back and forth between CG and UA, we can quickly guide the simulation towards a configuration that would have taken many more time steps within the UA representation alone. Accomplishing this feat requires a diligent workflow for managing input/output coordinate data between the different steps, deriving the potential at runtime, and inspecting convergence. Here in this article, we present a lightweight workflow environment that accomplishes such fast equilibration without user intervention. The workflow supports automated mapping between the CG and UA descriptions in an iterative, scalable, and customizable manner. We describe this technique, examine its feasibility, and analyze its correctness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Effects of polymeric binders on the cracking behavior of silicon composite electrodes during electrochemical cycling

Mechanical degradation caused by lithiation/delithiation-induced stress and large volume change is the primary cause of fast capacity fading of silicon (Si)-based electrodes. Although intensive efforts have been devoted to understanding electromechanically induced fractures of electrodes made of Si alone (e.g., Si particles, Si thin films, and Si wafers), the cracking behavior of Si/polymeric binders/carbon black composite electrodes is unclear and poorly understood. Here, we investigate, by in situ and ex situ techniques, the cracking behavior of Si composite electrodes made with different binders, including polyvinylidene fluoride (PVDF), sodium-alginate (SA), sodium-carboxymethyl cellulose (Na-CMC), and Nafion. We found that extensive cracks form during the 1st delithiation process, which periodically open and close during subsequent lithiation/delithiation cycles at the same locations in the Si composite electrodes made with SA, Na-CMC, and Nafion. In contrast, a significantly fewer number of cracks form in the Si/PVDF electrodes after electrochemical cycling. A possible mechanism is proposed to help understand the effects of binders on the cracking behavior (e.g., crack spacing and island size) of Si composite electrodes. We also suggest possible approaches, including reducing the electrode thickness, patterning electrodes, and using highly recoverable binders, to inhibit cracks and improve the mechanical integrity of Si composite electrodes.

25 ENERGY STORAGE↗
DOE OSTI2018

Synthesis, crystal structures, and dye removal properties of a series of discrete and polymeric copper, zinc, cobalt, and cadmium complexes containing bis-pyridyl-bis-amine ligands

Two bis-pyridyl-bis-amine ligands, trans-1,2-bis(m-picolyamino)cyclohexane (rac-m-picchxn) and trans-1,2-bis(p-picolyamino)cyclohexane (rac-p-picchxn), derived from trans-1,2-diaminocyclohexane (rac-chxn), were assembled with CuCl{sub 2}, ZnCl{sub 2}, ZnBr{sub 2}, Co(NO{sub 3}){sub 2}, and CdCl{sub 2} through reactants slow diffusion to afford corresponding metal complexes. Complexes [Cu(R,R-m-picchxn)Cl{sub 2}] (1) and [Zn(rac-m-picchxn)Br{sub 2}] (3) are mononuclear coordination structures, complex [Zn{sub 2}(rac-m-picchxn)Cl{sub 4}]{sub n} (2) adopts a one-dimensional (1D) helical chain, complex {[Co(R,R-p-picchxn)(NO_3)_2]·THF·2/3H_2O}{sub n} (4) has a two-dimensional (2D) kgm layer structure, complex [Cd(rac-p-picchxn)Cl{sub 2}]{sub n} (5) suits a 1D double-stranded zigzag chain structure, and compound [Cu(rac-chxn){sub 2}][CuCl{sub 3}] (6) is a Cu(I)-Cu(II) mixed-valence ionic product generated from the hydrolysis of rac-p-picchxn associated with the reduction of Cu(II) ion. The two bis-pyridyl-bis-amine ligands possess a chelating-bridging mode in forming infinite network and a chelating-only mode in forming discrete complexes. These metal–organic architectures show the influence of metal ion combining with organic ligand and anion on the structure variation. Noteworthy, chain polymers 2 and 5 could be utilized in the removal of methyl orange (MO), acid orange 7 (AO7), and malachite green (MG) from water through adsorptive processes. The adsorption dynamics of MO and AO7 on 2 and MG on both 2 and 5 obeyed a pseudo-second-order kinetics while that of MO and AO7 on 5 followed a pseudo-first-order kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Recent advances in thermoplastic elastomers from living polymerizations: Macromolecular architectures and supramolecular chemistry

Thermoplastic elastomers (TPEs) have found use in a wide range of applications, such as adhesives, elastomers, coatings, fibers, and in additive manufacturing techniques such as 3D printing. Despite their omnipresence, the need for advanced TPEs with adaptive properties is continuously growing. Along with a brief historical introduction, this review introduces an overview of typical structure-property relationships for various TPEs and discusses the design principles of TPEs from a synthetic chemistry perspective. Recent advances in TPEs with different macromolecular architectures, including linear ABA triblock copolymers, ABC triblock terpolymers, multiblock copolymers, star copolymers, graft copolymers, bottlebrush polymers, and hyperbranched polymers are reviewed. Service temperatures and mechanical properties of the different materials are compared in each section. Incorporating various supramolecular interactions into different macromolecular architectures as a means to further extend the range of TPE applications is also reported on. Further opportunities for TPE research in both academia and industry are proposed as perspectives.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Genome engineering of E. coli for improved styrene production and polymerization

Microbial production of exogenous organic compounds is challenging as biosynthetic pathways are often complex and produce metabolites that are toxic to the hosts. Biogenic styrene is an example of this problem, which if addressed could result in a more sustainable supply of this important component of the plastics industry. In this study, we engineered Escherichia coli for the production of styrene. We systematically optimized the production capability by first screening different pathway expression levels in E. coli strains. We then further designed and constructed a transcription regulator library targeting 54 genes with 85,420 mutations, and tested this library for increased styrene resistance and production. A series of tolerant mutants not only exhibited improved styrene tolerance but also produced higher styrene concentrations compared to the parent strain. The best producing mutant, ST05 LexA_E45I, produced a 3.45-fold increase in styrene compared to the parent strain. The produced styrene was extracted via gas stripping into dodecane and used in a direct free radical synthesis of polystyrene.

09 BIOMASS FUELS↗
DOE OSTI2018

Cationic Pyridylamido Adsorbate on Brønsted Acidic Sulfated Zirconia: A Molecular Supported Organohafnium Catalyst for Olefin Homo- and Co-Polymerization

Here we report the combined application of high-resolution solid-state 13 C–CPMAS-NMR and FT-IR spectroscopy, elemental analysis, kinetic poisoning/active site counting, variable dielectric constant medium, and DFT computation to characterize the surface chemistry of a pyridylamido hafnium complex (Cat1, L 1 -HfMe 2 , L 1 = 2,6-diisopropyl-N-{(2-isopropylphenyl)[6-(naphthalen-1-yl)pyridin-2-yl]methyl}aniline) adsorbed on Brønsted acidic sulfated zirconia (ZrS). The spectroscopic and DFT results indicate protonolytic formation of organohafnium cations having a largely electrostatic pyridylamido-Hf-CH 3 + ···ZrS - interaction with elongated Hf···OZrS distances of ~ 2.14 Å. High-molecular-weight polyethylenes and ethylene/1-octene copolymers are obtained with this supported catalyst without an activator/cocatalyst. The DFT calculations reveal that the first ethylene insertion into the Hf-methyl bond has a lower barrier than the corresponding insertion into the Hf-aryl bond of this single-site heterogeneous catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nanoscale Miscibility in In Situ Polymerized Hybrid Electrolytes Speeds Up Ion Dynamics and Enables Stable Cycling of Li Metal Batteries

While the potential use of copolymerized electrolytes in Li metal batteries is subject to intense investigation, the fundamental understanding of the nanoscale domain formation and its effect on Li + transport is still lacking. In this study, we investigated the correlation between the Li + transport mechanism and the miscibility of monomers in polymer blend electrolytes derived from the in situ copolymerization of methyl methacrylate (MMA) and vinylene carbonate (VC) in the presence of polyethylene glycol dimethyl ether (PEGDME) plasticizer and bis(trifluoromethanesulfonyl)imide (LiTFSI) salt. The addition of a polar short chain plasticizer reduced the dynamic and structural heterogeneities of the electrolyte. Small-angle X-ray scattering (SAXS) measurements and coarse-grained molecular dynamics (MD) simulations were used to investigate the nanoscale structure of the electrolytes. The distribution of relaxation times corresponding to the three distinct diffusion mechanisms of the free and interfacial Li + ions at the copolymer/plasticizer and electrolyte/SEI boundaries was analyzed in a broad temperature range to elucidate the Li + transport mechanism. Furthermore, the chemical composition of the SEI and the contribution of a ceramic lithium lanthanum zirconium oxide (LLZO, Li 7 La 3 Zr 2 O 12 ) phase on the interfacial resistance, salt degradation, and SEI stability were studied by X-ray photoelectron spectroscopy (XPS) depth profile analysis and electrochemical testing.

Li metal↗
DOE OSTI2023

Facile design of renewable lignin copolymers by photoinitiated RAFT polymerization as Pickering emulsion stabilizers

As the richest aromatic renewable resource, lignin has attracted significant attention for fabricating various materials. However, due to lignin's structural complexity, an effective and facile structural modification strategy remains a substantial challenge. Herein, we have successfully applied photoinitiated reversible addition–fragmentation chain transfer (RAFT) as a versatile tool to synthesize amphiphilic lignin copolymers with lignin derivatives as the macroinitiator. The experimental and density functional theory analysis systematically investigated the photopolymerization kinetics, proving excellent control over molecular weights. Additionally, 1 H NMR and FT-IR analyses confirmed the well-designed structures. Moreover, the structures of copolymers were tunable by simple variations of monomer structures. Finally, the self-assembly of the synthesized copolymers into nanoparticles was explored, together with the potential applications as Pickering emulsion stabilizers. Finally, we believe that this work will offer a facile and green approach to synthesize lignin-based novel copolymers and further expand its applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

From Molecules to Carbon Materials—High Pressure Induced Polymerization and Bonding Mechanisms of Unsaturated Compounds

With the development of high-pressure apparatus, in situ characterization methods and theoretical calculations, high-pressure technology becomes a more and more important method to synthesize new compounds with unusual structures and properties. By compressing compounds containing unsaturated carbon atoms, novel poly-ionic polymers, graphanes and carbon nanothreads were obtained. Their compositions and structures were carefully studied by combining multiple cutting-edge technologies, like the in situ high-pressure X-ray and neutron diffraction, transmission electron microscopy, pair distribution function, solid-state nuclear magnetic resonance and gas chromatography-mass spectroscopy. The reaction mechanisms were investigated based on the crystal structure at the reaction threshold pressure (the pressure just before the reaction taking place), the long-range and short-range structure of the product, molecular structure of the intermediates, as well as the theoretical calculation. In this review, we will summarize the synthesis of carbon materials by compressing the unsaturated compounds and its reaction characteristics under extreme conditions. The topochemical reaction mechanism and related characterization methods of the molecular system will be highlighted. This review will provide a reference for designing chemical reaction and exploring novel carbon materials under high-pressure condition.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Self-Propulsion Enhances Polymerization

Self-assembly is a spontaneous process through which macroscopic structures are formed from basic microscopic constituents (e.g., molecules or colloids). By contrast, the formation of large biological molecules inside the cell (such as proteins or nucleic acids) is a process more akin to self-organization than to self-assembly, as it requires a constant supply of external energy. Recent studies have tried to merge self-assembly with self-organization by analyzing the assembly of self-propelled (or active) colloid-like particles whose motion is driven by a permanent source of energy. Here we present evidence that points to the fact that self-propulsion considerably enhances the assembly of polymers: self-propelled molecules are found to assemble faster into polymer-like structures than non self-propelled ones. The average polymer length increases towards a maximum as the self-propulsion force increases. Beyond this maximum, the average polymer length decreases due to the competition between bonding energy and disruptive forces that result from collisions. The assembly of active molecules might have promoted the formation of large pre-biotic polymers that could be the precursors of the informational polymers we observe nowadays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Investigation of the Impact of Cross-Polymerization on the Structural and Frictional Properties of Alkylsilane Monolayers Using Molecular Simulation

Cross-linked chemisorbed n-alkylsilane (CH3(CH2)n-1Si(OH)3) monolayers on amorphous silica surfaces have been studied and their structural properties and frictional performance were compared to those of equivalent monolayers without cross-linkages. The simulations isolated for the first time the effects of both siloxane cross-linkages and the fraction of chains chemisorbed to the surface, providing insight into a longstanding fundamental question in the literature regarding molecular-level structure. The results demonstrate that both cross-linkages and the fraction of chemisorbed chains affect monolayer structure in small but measurable ways, particularly for monolayers constructed from short chains; however, these changes do not appear to have a significant impact on frictional performance.

Materials Science molecular dynamics↗