Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Quantification of electrochemical-mechanical coupling in lithium-ion batteries

Lithium-ion battery safety and durability by nature are dependent on electrochemical and mechanical coupling. Interdisciplinary efforts are required to understand and quantify coupling behaviors. Here we design and conduct mechanically constrained charge and discharge characterizations with efforts supported by multiphysics modeling to unravel the coupling mechanisms of solid-liquid electrode-electrolyte and solid-solid active materials in lithium-ion batteries. We demonstrate that a lithium-ion battery cell under mechanical constraint exhibits a higher voltage during charging and a shorter charging time because of increased electrolyte resistance and decreased diffusivity caused by decreased electrode porosity. The reaction force response of the cell is a combined result of the cell structural response mechanically and lithium-ion intercalation/de-intercalation-induced volume variation electrochemically. Under mechanical constraint, cell capacity is significantly reduced in fast-charge scenarios; however, it can be recovered by a constant-voltage charge protocol. The results highlight the promise of multiphysics approaches to unravel the electrochemical-mechanical coupling mechanisms to direct battery system design and management.

25 ENERGY STORAGE↗
DOE OSTI2023

Mass Spectrometry-Based High-Throughput Quantification of Bioproducts in Liquid Culture

To meet the ever-increasing need for high-throughput screening in metabolic engineering, information-rich, fast screening methods are needed. Mass spectrometry (MS) provides an efficient and general approach for metabolite screening and offers the capability of characterizing a broad range of analytes in a label-free manner, but often requires a range of sample clean-up and extraction steps. Liquid extraction surface analysis (LESA) coupled MS is an image-guided MS surface analysis approach that directly samples and introduces metabolites from a surface to MS. Here, we combined the advantages of LESA–MS and an acoustic liquid handler with stable isotope-labeled internal standards. This approach provides absolute quantitation of target chemicals from liquid culture-dried droplets and enables high-throughput quantitative screening for microbial metabolites. In this paper, LESA–MS was successfully applied to quantify several different metabolites (itaconic acid, triacetic acid lactone, and palmitic acid) from different yeast strains in different mediums, demonstrating its versatility, accuracy, and efficiency across a range of microbial engineering applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

An Antibody Cocktail-Based Immunoaffinity-LC-MS Method Enabled Ultra-Sensitive and Robust Quantification of Circulating Proinsulin Proteoforms and C-Peptide

Accurately measuring circulating proinsulin proteoforms is crucial for clinical investigation of diabetes, but was previously not feasible owing to limited assay specificity/sensitivity. Here, in this study, we devised a highly sensitive LC-MS-based strategy to quantify intact proinsulin, des-31,32 and des-64,65 proinsulin, and C-peptide in circulation. The method involves: (i) quantitative, robust affinity capture using an optimized antibody cocktail, eliminating the severe quantitative bias across multiple proteoforms typically introduced when using a single antibody; (ii) Lys-C digestion producing unique signature peptides for each proteoform, and (iii) trapping-nano-LC coupled with FAIMS/dCV-MS for an ultrasensitive analysis. The selective trapping/delivery ensured sensitive/selective analysis of the targets while achieving excellent analytical robustness that is critical for clinical assays, and the FAIMS/dCV substantially reduces baseline noise/interferences, further enhancing S/N. The assay achieved exceptional sensitivity, with serum LOQs of 1.7, 2.3, and 3.6 pg/mL respectively for intact-proinsulin, des-31,32 and des-64,65, representing the first assay capable of sensitively quantifying these major circulating proinsulin proteoforms. We applied this assay to 78 subjects, including autoantibody positive (n = 20) and new-onset type 1 diabetes (T1D, n = 19) with respective age/sex/BMI-matched controls, enabling the first accurate profiling of proinsulin proteoforms in clinical groups. The assay results demonstrated a clear separation of control and new-onset T1D groups that a parallel total-proinsulin ELISA assay fails to capture. Furthermore, distinct expression patterns in relative abundance ratios among proteoforms were observed across clinical groups. This assay may provide valuable insights into the β-cell functions and the onset/progression of diabetes and other associated conditions. Moreover, the strategy is broadly applicable to targeted measurement of other biomarker proteoforms.

Shen, Qingqing [University at Buffalo, NY (United ↗
DOE OSTI2019

Atom Probe Tomography of Molecular Organic Materials: Sub-Dalton Nanometer-Scale Quantification

In this article, we demonstrate that atom probe tomography (APT) can be applied to small-molecule organic materials. We show that APT can provide an unprecedented combination of mass resolution of <1 Da, spatial resolution of ~0.3 nm in z and ~1 nm in x–y, and analytic sensitivity of ~50 ppm with no evidence of molecular fragmentation. We discuss two systems that demonstrate the power of APT to uncover structure–property relationships in organic systems that have proven extremely difficult to probe using existing techniques: (1) a previously published model organic photovoltaic system in which we show a chemical reaction occurs at the heterointerface; and (2) a model organic light-emitting diode system in which we show molecular segregation occurs in the emissive layer bulk. Lastly, these examples illustrate the power of APT to enable new insights into organic molecular materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quantification of the Impact of Acidified Brine on Fracture-Matrix Transport in a Naturally Fractured Shale Using in Situ Imaging and Modeling

Understanding flow, transport, chemical reactions, and hydromechanical processes in fractured geologic materials is key for optimizing a range of subsurface processes including carbon dioxide and hydrogen storage, unconventional energy resource extraction, and geothermal energy recovery. Flow and transport processes in naturally fractured shale rocks have been challenging to characterize due to experimental complexity and the multiscale nature of quantifying continuum scale descriptions of mass exchange between micrometer-scale fractures and nanometer-scale pores. In this study, we use positron emission tomography (PET) to image the transport of a conservative tracer in a naturally fractured Wolfcamp shale core before and after the core was exposed to low pH brine conditions. Image-based experimental observations are interpreted by fitting an analytical transport model to fracture-containing voxels in the core. Results of this analysis indicate subtle increases in matrix diffusivity and a slightly more uniform fracture velocity distribution following exposure to low pH conditions. These observations are compared with a multicomponent one-dimensional reactive transport model that indicates the capacity for a 10% increase in porosity at the fracture-matrix interface as a result of the low pH brine exposure. This porosity change is the result of the dissolution of carbonate minerals in the shale matrix to low pH conditions. Further, this image-based workflow represents a new approach for quantifying spatially resolved fracture-matrix transport processes and provides a foundation for future work to better understand the role of coupled transport, reaction, and mechanical processes in naturally fractured rocks.

58 GEOSCIENCES↗
DOE OSTI2020

Quantification of CO 2 Mineralization at the Wallula Basalt Pilot Project

In 2013, the Pacific Northwest National Laboratory led a geologic carbon sequestration field demonstration where ~1000 tonnes of CO 2 was injected into several deep Columbia River Basalt zones near Wallula, Washington. Rock core samples extracted from the injection zone two years after CO 2 injection revealed nascent carbonate mineralization that was qualitatively consistent with expectations from laboratory experiments and reactive transport modeling. In this study, we report on a new detailed analysis of the 2012 pre-injection and 2015 post-injection hydrologic tests that capitalizes on the difference in fluid properties between scCO 2 and water to assess changes in near-field, wellbore, and reservoir conditions that are apparent approximately two years following the end of injection. This comparative hydrologic test analysis method provides a new way to quantify the amount of injected CO 2 that was mineralized in the field test. Modeling results indicate that approximately 60% of the injected CO 2 was sequestered via mineralization within two years, with the resulting carbonates occupying ~4% of the available reservoir pore space. The method presented here provides a new monitoring tool to assess the fate of CO 2 injected into chemically reactive basalt formations but could also be adapted for long-term monitoring and verification within more traditional subsurface carbon storage reservoirs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

X-ray Spectroscopic Quantification of Phosphorus Transformation in Saharan Dust during Trans-Atlantic Dust Transport

Saharan dust is an important phosphorus (P) supply to remote and oligotrophic parts of the oceans and American lowland tropical rainforests. Phosphorus speciation in aeolian dust ultimately controls the release and bioavailability of P after dust deposition, but the speciation in Saharan dust and its change during the trans-Atlantic transport remains unclear. Here, using P K-edge X-ray absorption near edge structure (XANES) spectroscopy, we showed that with increasing dust traveling distance from the Sahara Desert to Cape Verde and to Puerto Rico, about 570 and 4000 km, respectively, the proportion of Ca-bound P (Ca-P), including both apatite and non-apatite forms, decreased from 68–73% to 50–71% and to 21–37%. The changes were accompanied by increased iron/aluminum-bound P proportion from 14–25% to 23–46% and to 44–73%, correspondingly. Laboratory simulation experiments suggest that the changes in P speciation can be ascribed to increasing degrees of particle sorting and atmospheric acidification during dust transport. The presence of relatively soluble non-apatite Ca-P in the Cape Verde dust but not in the Puerto Rico dust is consistent with the higher P water solubility of the former than the latter. Our findings provide insights into the controls of atmospheric processes on P speciation, solubility, and stability in Saharan dust.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Quantification of Raman-Interfering Polyoxoanions for Process Analysis: Comparison of Different Chemometric Models and a Demonstration on Real Hanford Waste

The Hanford site represents a complicated environmental remediation challenge, remaining from the production of nuclear weapons. Over 100 million gallons of liquid radioactive waste of unknown composition will be chemically processed and vitrified, but the varying chemical composition and highly radioactive nature of the waste preclude the implementation of more developed, offline technologies to determine the composition. The only practical approach to waste treatment will require the significant utilization of real-time, chemometric modeling approaches. Although chemometric approaches have been applied to the analysis of Hanford waste, the models developed were highly tank-specialized, and limited discussion was provided on how models fared with interfering signals. As the tank waste is largely composed of oxoanions, which tend to have interfering Raman spectra, the general question was posed as to what chemometric approach is best suited to accurately quantify analytes in the presence of interfering signals. This was carried out by examining the ability of classical least square (CLS), principal component regression (PCR), partial least square (PLS), and locally weighted regression (LWR) to quantify NO 3 – and CO 3 2– using their bands around 1050 cm –1 . Finally, for all samples, the PLS-based model was found to be the most efficient approach from a model building and application perspective.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

3D Quantification of Pore Networks and Anthropogenic Carbon Mineralization in Stacked Basalt Reservoirs

Basalt formations are promising candidates for the geologic storage of anthropogenic CO 2 due to their storage capacity, porosity, permeability, and reactive geochemical trapping ability. The Wallula Basalt Carbon Storage Pilot Project demonstrated that supercritical CO 2 injected into >800 m deep Columbia River Basalt Group stacked reservoir flow tops mineralizes to ankerite-siderite-aragonite on month-year timescales, with 60% of the 977 metric tonnes of CO 2 converted within two years. The potential impacts of mineral precipitation and consequent changes on rock porosity, pore structure, pore size, and pore size distributions have likely been underestimated hitherto. Herein, we address these knowledge gaps using X-ray Micro Computed Tomography (XMT) to evaluate the pore network architecture of sidewall cores recovered two years after CO 2 injection. In the present study, we performed a detailed quantitative analysis of the CO 2 -reacted basalt cores by XMT imaging. Reconstructed 3D images were analyzed to study the distribution and volumetric details of porosity and carbonate nodules in the cores along with the various other phases, providing insight into paragenesis and carbonate growth mechanisms, including mineralogic/chemical zonation. Finally, these findings are being used to parametrize multiphase reactive transport models to predict the fate and transport of subsurface CO 2 , enabling scale-up to commercial-scale geologic carbon storage in basalts and other reactive mafic-ultramafic formations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

In situ spectroscopic analysis and quantification of [Tc(CO)3]+ in Hanford tank waste

A Pretreatment Protocol is demonstrated for the quantitative conversion and subsequent in situ spectroscopic analysis of non-pertechnetate [Tc(CO)3]+ in tank 241-AN-102 at the Hanford Site. This conversion technique is based on a test method demonstrated using [Re(CO)3]+ in simulated Hanford tank waste. The Protocol entails adding a real waste sample containing the non-pertechnetate [Tc(CO)3]+ species to a developer solution that facilitates the rapid, quantitative conversion of the non-emissive species to a luminescent species which can then be detected spectroscopically. Three AN-102 samples were tested by the standard addition method: (1) a 5 M Na adjusted sample, (2) a sample depleted 137Cs by resin column ion exchange, (3) and an acid-stripped column eluate. The concentrations of non-pertechnetate [Tc(CO)3]+ in these samples were 7.78 × 10-6 M, 6.53 × 10-7 M, and 2.46 × 10-6 M, respectively.

Branch, Shirmir D.↗