Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum computing for simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Exploring Quantum State Preparation Using Tensor Networks and Sparse Wavefunction Simulations

The variational quantum eigenvalue solver is a powerful hybrid quantum-classical approach that has been suggested as a candidate method to run on near-term quantum hardware for computing ground state electronic energies of molecular systems. However, even for small molecules, the number of variational parameters and qubits required to minimize the electronic energy is beyond the reach of current quantum computers except for small basis sets. We explore a new paradigm for state preparation where we test how much of the optimization can be approximately prepared with classical computers to reduce the number of optimization steps performed using a quantum device. By adapting a recent algorithm for the factorized form of the UCC ansatz, we can study molecular electronic structure problems with up to 64 qubits. In addition, we also test a related approach of using tensor networks to optimize quantum circuits in order to benchmark various lattice models. We present results using these approaches and discuss strategies for incorporating these ideas into variational algorithms involving near-term quantum computers. Our results help demonstrate the strength of the UCC ansatz and address pressing questions about optimal initial parameterizations and circuit construction.

quantum computing↗
NASA NTRS2011

Comparison of DSMC and CFD Solutions of Fire II Including Radiative Heating

The ability to compute rarefied, ionized hypersonic flows is becoming more important as missions such as Earth reentry, landing high mass payloads on Mars, and the exploration of the outer planets and their satellites are being considered. These flows may also contain significant radiative heating. To prepare for these missions, NASA is developing the capability to simulate rarefied, ionized flows and to then calculate the resulting radiative heating to the vehicle's surface. In this study, the DSMC codes DAC and DS2V are used to obtain charge-neutral ionization solutions. NASA s direct simulation Monte Carlo code DAC is currently being updated to include the ability to simulate charge-neutral ionized flows, take advantage of the recently introduced Quantum-Kinetic chemistry model, and to include electronic energy levels as an additional internal energy mode. The Fire II flight test is used in this study to assess these new capabilities. The 1634 second data point was chosen for comparisons to be made in order to include comparisons to computational fluid dynamics solutions. The Knudsen number at this point in time is such that the DSMC simulations are still tractable and the CFD computations are at the edge of what is considered valid. It is shown that there can be quite a bit of variability in the vibrational temperature inferred from DSMC solutions and that, from how radiative heating is computed, the electronic temperature is much better suited for radiative calculations. To include the radiative portion of heating, the flow-field solutions are post-processed by the non-equilibrium radiation code HARA. Acceptable agreement between CFD and DSMC flow field solutions is demonstrated and the progress of the updates to DAC, along with an appropriate radiative heating solution, are discussed. In addition, future plans to generate more high fidelity radiative heat transfer solutions are discussed.

Liechty, Derek S.↗
DOE OSTI2021

The FMO-DFTB Method

Although the fragment molecular orbital (FMO) method enables electronic structure calculations with near-linear scaling behavior with respect to system size, the computational cost of ab initio methods typically employed in conjunction with FMO is still prohibitive for routine calculations of very large systems or long timescale molecular dynamics simulations. We, therefore, combined the FMO and density-functional tight-binding (DFTB) method, which is one of the emerging semi-empirical quantum chemical methods, and have demonstrated that FMO-DFTB is capable of performing geometry optimizations for systems containing up to one million atoms using limited computational resources. In this chapter, we will review the basics of the DFTB method first before introducing FMO-DFTB, focusing on the relationship with density functional theory and other FMO methodologies. We also demonstrate the latest scalings of FMO-DFTB2 and DFTB3 using three-dimensional water clusters, showing that the most favorable scaling is O(N1.16). Applications of FMO-DFTB to various systems are briefly summarized, and an outlook to future applications is provided.

Nishimoto, Yoshio↗
DOE OSTI2026

An end-to-end workflow for executing a classically bootstrapped variational quantum algorithm on an academic quantum computer

Academic quantum computing platforms often face unique challenges in executing quantum workloads due to fragmented software environments and limited engineering support. Unlike commercial ecosystems, academic devices typically evolve without full-stack integration in mind, making it difficult to run complex applications—such as variational quantum algorithms (VQA)—reliably and efficiently. Issues such as incompatible software layers and lack of automated job management significantly increase the overhead of theory-experiment collaboration. To address these challenges, we develop a modular, end-to-end workflow that decouples application-layer code from low-level hardware control, automates circuit submission and result collection, and supports fine-grained circuit-level job scheduling and recovery. The architecture employs a dual-end application programming interface (API) design, enabling robust operation across unstable or resource-constrained hardware backends. For practical use, the framework is lightweight and user-friendly, allowing rapid prototyping of full-stack workflows using basic Python tools. We validate this workflow on a high-fidelity trapped-ion quantum computer by demonstrating a variational quantum eigensolver (VQE) experiment with a classically bootstrapped ansatz initialization technique. The system successfully executed over 60,000 circuits across multiple molecular test cases with minimal human intervention, highlighting the framework’s effectiveness in enabling reproducible, resilient quantum experimentation in academic settings.

Clifford↗
DOE OSTI2021

Operator learning for predicting multiscale bubble growth dynamics

We report simulating and predicting multiscale problems that couple multiple physics and dynamics across many orders of spatiotemporal scales is a great challenge that has not been investigated systematically by deep neural networks (DNNs). Herein, we develop a framework based on operator regression, the so-called deep operator network (DeepONet), with the long-term objective to simplify multiscale modeling by avoiding the fragile and time-consuming “hand-shaking” interface algorithms for stitching together heterogeneous descriptions of multiscale phenomena. To this end, as a first step, we investigate if a DeepONet can learn the dynamics of different scale regimes, one at the deterministic macroscale and the other at the stochastic microscale regime with inherent thermal fluctuations. Specifically, we test the effectiveness and accuracy of the DeepONet in predicting multirate bubble growth dynamics, which is described by a Rayleigh–Plesset (R–P) equation at the macroscale and modeled as a stochastic nucleation and cavitation process at the microscale by dissipative particle dynamics (DPD). First, we generate data using the R–P equation for multirate bubble growth dynamics caused by randomly time-varying liquid pressures drawn from Gaussian random fields (GRFs). Our results show that properly trained DeepONets can accurately predict the macroscale bubble growth dynamics and can outperform long short-term memory networks. We also demonstrate that the DeepONet can extrapolate accurately outside the input distribution using only very few new measurements. Subsequently, we train the DeepONet with DPD data corresponding to stochastic bubble growth dynamics. Although the DPD data are noisy and we only collect sparse data points on the trajectories, the trained DeepONet model is able to predict accurately the mean bubble dynamics for time-varying GRF pressures. Taken together, our findings demonstrate that DeepONets can be employed to unify the macroscale and microscale models of the multirate bubble growth problem, hence providing new insight into the role of operator regression via DNNs in tackling realistic multiscale problems and in simplifying modeling with heterogeneous descriptions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

CompF2: Theoretical Calculations and Simulation Topical Group Report

This report summarizes the work of the Computational Frontier topical group on theoretical calculations and simulation for Snowmass 2021. We discuss the challenges, potential solutions, and needs facing six diverse but related topical areas that span the subject of theoretical calculations and simulation in high energy physics (HEP): cosmic calculations, particle accelerator modeling, detector simulation, event generators, perturbative calculations, and lattice QCD (quantum chromodynamics). The challenges arise from the next generations of HEP experiments, which will include more complex instruments, provide larger data volumes, and perform more precise measurements. Calculations and simulations will need to keep up with these increased requirements. The other aspect of the challenge is the evolution of computing landscape away from general-purpose computing on CPUs and toward special-purpose accelerators and coprocessors such as GPUs and FPGAs. These newer devices can provide substantial improvements for certain categories of algorithms, at the expense of more specialized programming and memory and data access patterns.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Reducing the complexity of finite-temperature auxiliary-field quantum Monte Carlo

The auxiliary-field quantum Monte Carlo (AFMC) method is a powerful and widely used technique for ground-state and finite-temperature simulations of quantum many-body systems. Here we introduce several algorithmic improvements for finite-temperature AFMC calculations of dilute fermionic systems that reduce the computational complexity of most parts of the algorithm. This is principally achieved by reducing the number of single-particle states that contribute at each configuration of the auxiliary fields to a number that is of the order of the number of fermions. Our methods are applicable for both the canonical and grand-canonical ensembles. We demonstrate the reduced computational complexity of the methods for the homogeneous unitary Fermi gas.

67.85.Lm↗
DOE OSTI2022

Universal machine learning framework for defect predictions in zinc blende semiconductors

Our article introduces a universal predictive framework for point defect formation energies and charge transition levels in a wide chemical space of zinc blende semiconductors and possible impurity atoms selected from across the periodic table. This framework was developed by leveraging high-throughput quantum mechanical simulations benchmarked using some experimental data from the literature, as well as machine learning (ML)-based regressions techniques that map unique materials descriptors to computed defect properties and yield optimized and generalizable models. Furthermore, the power and utility of these models is revealed through quick predictions for thousands of new defects and screening of low-energy impurities, which may tune the equilibrium conductivity in the semiconductor. This work presents, to our knowledge, the largest density functional theory (DFT) dataset of defect properties in semiconductors and the largest DFT+ML-based screening of point defects in semiconductors to date.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Operator product expansion for radial lattice quantization of 3D ϕ 4 theory

At its critical point, the three-dimensional lattice Ising model is described by a conformal field theory (CFT), the 3D Ising CFT. Instead of carrying out simulations on Euclidean lattices, we use the quantum finite elements method to implement radially quantized critical ϕ 4 theory on simplicial lattices approaching R × S 2 . Computing the four-point function of identical scalars, we demonstrate the power of radial quantization by the accurate determination of the scaling dimensions Δ ε and Δ T as well as ratios of the operator product expansion coefficients f σ σ ε and f σ σ T of the first spin-0 and spin-2 primary operators ε and T of the 3D Ising CFT. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Braiding of Majorana zero modes in vortex cores

Here, we demonstrate the successful simulation of $\sqrt{𝑍-}$, $\sqrt{𝑋-}$, and 𝑋-quantum gates using Majorana zero modes (MZMs) that emerge in magnetic vortices located in topological superconductors. We compute the transition probabilities and geometric phase differences accounting for the full many-body dynamics and show that qubit states can be read out by fusing the vortex core MZMs and measuring the resulting charge density. We visualize the gate processes using the time- and energy-dependent nonequilibrium local density of states. Our results demonstrate the feasibility of employing vortex core MZMs for the realization of fault-tolerant topological quantum computing.

Majorana bound states↗
NASA NTRS2001

2-D Modeling of Nanoscale MOSFETs: Non-Equilibrium Green's Function Approach

We have developed physical approximations and computer code capable of realistically simulating 2-D nanoscale transistors, using the non-equilibrium Green's function (NEGF) method. This is the most accurate full quantum model yet applied to 2-D device simulation. Open boundary conditions and oxide tunneling are treated on an equal footing. Electrons in the ellipsoids of the conduction band are treated within the anisotropic effective mass approximation. Electron-electron interaction is treated within Hartree approximation by solving NEGF and Poisson equations self-consistently. For the calculations presented here, parallelization is performed by distributing the solution of NEGF equations to various processors, energy wise. We present simulation of the "benchmark" MIT 25nm and 90nm MOSFETs and compare our results to those from the drift-diffusion simulator and the quantum-corrected results available. In the 25nm MOSFET, the channel length is less than ten times the electron wavelength, and the electron scattering time is comparable to its transit time. Our main results are: (1) Simulated drain subthreshold current characteristics are shown, where the potential profiles are calculated self-consistently by the corresponding simulation methods. The current predicted by our quantum simulation has smaller subthreshold slope of the Vg dependence which results in higher threshold voltage. (2) When gate oxide thickness is less than 2 nm, gate oxide leakage is a primary factor which determines off-current of a MOSFET (3) Using our 2-D NEGF simulator, we found several ways to drastically decrease oxide leakage current without compromising drive current. (4) Quantum mechanically calculated electron density is much smaller than the background doping density in the poly silicon gate region near oxide interface. This creates an additional effective gate voltage. Different ways to. include this effect approximately will be discussed.

Svizhenko, Alexei↗
DOE OSTI2024

JARVIS-Leaderboard: a large scale benchmark of materials design methods

Abstract Lack of rigorous reproducibility and validation are significant hurdles for scientific development across many fields. Materials science, in particular, encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform with multiple data modalities with perfect and defect materials data is still lacking. This work introduces JARVIS-Leaderboard, an open-source and community-driven platform that facilitates benchmarking and enhances reproducibility. The platform allows users to set up benchmarks with custom tasks and enables contributions in the form of dataset, code, and meta-data submissions. We cover the following materials design categories: Artificial Intelligence (AI), Electronic Structure (ES), Force-fields (FF), Quantum Computation (QC), and Experiments (EXP). For AI, we cover several types of input data, including atomic structures, atomistic images, spectra, and text. For ES, we consider multiple ES approaches, software packages, pseudopotentials, materials, and properties, comparing results to experiment. For FF, we compare multiple approaches for material property predictions. For QC, we benchmark Hamiltonian simulations using various quantum algorithms and circuits. Finally, for experiments, we use the inter-laboratory approach to establish benchmarks. There are 1281 contributions to 274 benchmarks using 152 methods with more than 8 million data points, and the leaderboard is continuously expanding. The JARVIS-Leaderboard is available at the website: https://pages.nist.gov/jarvis_leaderboard/

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tensor network representation of non-abelian gauge theory coupled to reduced staggered fermions

We show how to construct a tensor network representation of the path integral for reduced staggered fermions coupled to a non-abelian gauge field in two dimensions. The resulting formulation is both memory and computation efficient because reduced staggered fermions can be represented in terms of a minimal number of tensor indices while the gauge sector can be approximated using Gaussian quadrature with a truncation. Numerical results obtained using the Grassmann TRG algorithm are shown for the case of SU(2) lattice gauge theory and compared to Monte Carlo results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Solving the Bernstein-Vazirani problem using Majorana-based topological quantum algorithms

Executing quantum algorithms using Majorana zero modes—a major milestone for the field of topological quantum computing—requires a platform that can be scaled to large quantum registers, can be controlled in real time and space, and a braiding protocol that uses the unique properties of these exotic particles. Here, we demonstrate the first successful simulation of a Majorana-based, fault-tolerant quantum algorithm to solve the Bernstein-Vazirani problem in two-dimensional magnet-superconductor hybrid structures from initialization to read-out of the final many-body state. Utilizing the Majorana zero modes’ topological properties, we introduce an optimized braiding protocol for the algorithm and a scalable architecture for its implementation with an arbitrary number of qubits. We visualize the algorithm protocol in real time and space by computing the non-equilibrium density of states, which is proportional to the time-dependent differential conductance, and the non-equilibrium charge density, which assigns a unique signature to each final state of the algorithm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Quantum mechanical model of crossing and anti-crossing points in 3D full-band Monte Carlo simulations

This work presents a 3D quantum mechanics based model to address the physics at band structure crossing/anti-crossing points in full band Monte Carlo (FBMC) simulations. The model solves the Krieger and Iafrate (KI) equations in real time using pre-computed coefficients at k-points spatially sampled within the first Brillouin zone. Solving the KI equations in real time makes this model applicable for all electric fields, which enables its use in FBMC device simulations. In this work, a two-level refinement scheme is used to aggressively sample regions in proximity to band crossings for accurate solutions to the KI equations and coarsely sample everywhere else to limit the number of k-points used. The presented sampling method is demonstrated on the band structure of silicon but is effective for the band structure of any semiconductor material. Next, the adaptation of the fully quantum KI model into the semi-classical FBMC method is discussed. Finally, FBMC simulations of hole transport in 4H silicon carbide with and without the KI model are performed. Results along different crystallographic directions for a wide range of electric fields are compared to previously published simulation and experimental values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Machine-learning accelerated geometry optimization in molecular simulation

Geometry optimization is an important part of both computational materials and surface science because it is the path to finding ground state atomic structures and reaction pathways. These properties are used in the estimation of thermodynamic and kinetic properties of molecular and crystal structures. This process is slow at the quantum level of theory because it involves an iterative calculation of forces using quantum chemical codes such as density functional theory (DFT), which are computationally expensive and which limit the speed of the optimization algorithms. It would be highly advantageous to accelerate this process because then one could do either the same amount of work in less time or more work in the same time. Here, we provide a neural network (NN) ensemble based active learning method to accelerate the local geometry optimization for multiple configurations simultaneously. We illustrate the acceleration on several case studies including bare metal surfaces, surfaces with adsorbates, and nudged elastic band for two reactions. In all cases, the accelerated method requires fewer DFT calculations than the standard method. In addition, we provide an Atomic Simulation Environment (ASE)-optimizer Python package to make the usage of the NN ensemble active learning for geometry optimization easier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Exploration of Quantum Machine Learning and AI Accelerators for Fusion Science

The dawn of the noisy intermediate-scale quantum (NISQ) era sparked rapid development in variational quantum algorithms. These algorithms, utilizing parameterized quantum circuit optimized by classical computers with feedback, are practical under the constraints of the current hardware and can potentially show quantum advantage. In recent years, these variational circuit are applied to neural networks, hoping to boost the triumphant success of deep learning. We simulate various of quantum-classical hybrid neural networks applied to scientific tasks, and seek to understand their capabilities and limitations. Specifically, we devise quantum convolutional layers and apply them to deep neural networks used for predicting plasma disruption in fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2003

Study of alloy disorder in quantum dots through multi-million atom simulations

A tight binding model which includes s, p, d, s orbitals is used to examine the electronic structures of an ensemble of dome-shaped In0.6 Ga0.4 As quantum dots. Given ensembles of identically sized quantum dots, variations in composition and configuration yield a linewidth broadening of less than 0.35 meV, much smaller than the total broadening determined from photoluminescence experiments. It is also found that the computed disorder-induced broadening is very sensitive to the applied boundary conditions, so that care must be taken to ensure proper convergence of the numerical results. Examination of local eigenenergies as functions of position shows similar convergence problems and indicates that an inaccurate resolution of the equilibrium atomic positions due to truncation of the simulation domain may be the source of the slow ground state convergence.

disorder↗