Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Visible-light-driven ZnFe{sub 2}O{sub 4}/Ag/Ag{sub 3}VO{sub 4} photocatalysts with enhanced photocatalytic activity under visible light irradiation

Highlights: • The ZnFe2O4/Ag/Ag3VO4 composites were successfully synthesized by a hydrothermal method. • ZnFe2O4/Ag/Ag3VO4 composites showed better photocatalytic activity for MO and TC degradation under visible light. • The ZnFe2O4/Ag/Ag3VO4 photocatalyst is promising for designing an environmental purification material. - Abstract: A novel visible-light driven ZnFe{sub 2}O{sub 4}/Ag/Ag{sub 3}VO{sub 4} photocatalyst was successfully fabricated through a two-step hydrothermal method. The structure, morphology and composition of the samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray photo-electron spectroscopy (XPS). The as-prepared ZnFe{sub 2}O{sub 4}/Ag/Ag{sub 3}VO{sub 4} composites possessed an excellent performance in the photocatalytic degradation of methyl orange and tetracycline under visible-light irradiation. The results of electrochemical impedance spectroscopy (EIS) indicated that the ZnFe{sub 2}O{sub 4}/Ag/Ag{sub 3}VO{sub 4} composite could facilitate the separation of photo-generated carriers, as well as accelerated charge transfer. The 5% ZnFe{sub 2}O{sub 4}/Ag/Ag{sub 3}VO{sub 4} composite exhibited the upmost photocatalytic activity, the degradation constant of 5% ZnFe{sub 2}O{sub 4}/Ag/Ag{sub 3}VO{sub 4} is as high as 1.49 times to that of Ag/Ag{sub 3}VO{sub 4}. Also, according to the trapping experiments, it’s found that the superoxide radicals (·O{sub 2}{sup −}) and hole (h{sup +}) were the predominant reactive species in this system. The ZnFe{sub 2}O{sub 4}/Ag/Ag{sub 3}VO{sub 4} photocatalyst is promising for designing as an environmental purification material in treatment of antibiotic pollutant.

36 MATERIALS SCIENCE↗

Application of GO anchored mediator in a polymer electrolyte membrane for high-rate solid-state supercapacitors

Here, we synthesized a novel polymer electrolyte membrane by combining poly (vinylidene fluoride) (PVDF) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) with graphene oxide (GO) nanosheets and a lithium salt of tungstosilicic acid (Li 4 SiW 12 O 40 , hereafter, referred to SiWLi). The impact of the addition of GO/SiWLi on the microstructure and morphology of the membrane were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). We found that adding the GO/SiWLi to the PVDF/LiTFSI polymer electrolyte membrane significantly reduced the pore size. Furthermore, the addition of the GO/SiWLi resulted in not only an increase of the ionic conductivity from 0.87 $\times$ 10 –2 to 3.12 $\times$ 10 –2 Scm –1 but also an increase in the lithium-ion transference number from 0.52 to 0.87. The polymer electrolyte membranes with and without GO/SiWLi were utilized to fabricate solid-state supercapacitors. The supercapacitors fabricated with the membrane containing GO/SiWLi displayed 37.2% lower equivalent series resistance and 88.2% greater specific capacitance than those fabricated using the membrane without GO/SiWLi at 200mVs –1 .

42 ENGINEERING↗

NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling

This study reports the design and development of ductile and strong refractory single-phase high-entropy alloys (HEAs) for high temperature applications, based on NbTaV with addition of Ti and W. Assisted by CALPHAD modeling, a single body-centered cubic solid solution phase was experimentally confirmed in the as-cast ingots using X-ray diffraction and scanning electron microscopy. The observed elemental segregation in each alloy qualitatively agrees with CALPHAD prediction. The Vickers microhardnesses (and yielding strengths) of the alloys are about 3 (and 3.5-4.4) times that those estimated from the rule of mixture. While NbTaTiVW shows an impressive yielding strength of 1,420 MPa with fracture strain of 20%, NbTaTiV exhibits exceptional compressive ductility at room temperature.

36 MATERIALS SCIENCE↗

Improvement of the fracture toughness of hydroxyapatite (HAp) by incorporation of carboxyl functionalized single walled carbon nanotubes (CfSWCNTs) and nylon

The potential of improving the fracture toughness of synthetic hydroxyapatite (HAp) by incorporating carboxyl functionalized single walled carbon nanotubes (CfSWCNTs) and polymerized ε-caprolactam (nylon) was researched. A series of HAp samples with CfSWCNTs concentrations varying from 0 to 1.5 wt.%, without, and with nylon addition was prepared. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM) were used to characterize the samples. The three point bending test was applied to measure the fracture toughness of the composites. A reproducible value of 3.6 ± 0.3 MPa.√m was found for samples containing 1 wt.% CfSWCNTs and nylon. This value is in the range of the cortical bone fracture toughness. Lastly, the increase of the CfSWCNTs content results to decrease of the fracture toughness, and formation of secondary phases.

36 MATERIALS SCIENCE↗

Corrosion of novel reactive silver ink and commercial silver-based metallizations in diluted acetic acid

Silver-based metallizations in photovoltaic modules are susceptible to corrosion by acetic acid generated in ethylene vinyl acetate encapsulated modules, resulting in power losses over time. Here, three silver-based metallizations are exposed to diluted acetic acid, in concentrations representative of that found in field-exposed modules. Compositional, morphological, and structural changes of the metallizations are studied over 3000 h of exposure to diluted acetic acid using Raman spectroscopy mapping, X-ray diffraction, and scanning electron microscopy. The three metallizations studied are: 1) a commercial high-temperature fire-through Ag paste, commonly used for Si diffused junction solar cells; 2) a commercial low-temperature paste normally used for silicon heterojunction cells; and 3) a novel low-temperature reactive silver ink shown to be suitable for photovoltaic applications. We find distinct corrosion rates for the high-temperature silver paste and reactive silver ink in the presence of diluted acetic acid. However, the low-temperature silver paste appears to be more corrosion resistant, likely due to a polymer layer that protects the silver particles.

36 MATERIALS SCIENCE↗

A Mössbauer spectral study of degradation in La 0.58 Sr 0.4 Fe 0.5 Co 0.5 O 3–x after long-term operation in solid oxide electrolysis cells

Here, degradation processes of oxygen electrodes in solid oxide electrolysis cells (SOECs) were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Mössbauer spectroscopy. La 0.58 Sr 0.4 Fe 0.5 Co 0.5 O 3–x (LSCF) anodes (oxygen electrode) were analyzed after different long-term operations durations of 1774, 6100 and 9000 h. The results were compared with a cell in the initial state. Besides the LSCF anode, the SOECs were composed of a Ce 0.8 Gd 0.2 O 1.9 barrier layer between the anode and electrolyte, yttria-stabilized zirconia (YSZ) as electrolyte and Ni-YSZ as cathode (hydrogen electrode). Mössbauer spectra of the iron-containing anode were acquired in order to determine the alteration of the iron oxidation state and its local environment during operation. Mössbauer spectroscopy yields indirect information about the degradation mechanism, especially in combination with SEM, TEM, and XRD. XRD and TEM revealed the appearance of Co 3 O 4 during the SOEC operation and SEM analyses confirmed the formation of SrZrO 3 at the electrode/electrolyte interface. The spectral analysis confirmed the reduction of iron from Fe(IV) to Fe(III) in LSCF after long-term operation. The fraction of Fe(IV) in the electrode decreased with time and 18, 15, 13 and 11% were obtained for 0, 1774, 6100, and 9000 h of operation, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CMAS behavior of yttrium aluminum garnet (YAG) and yttria-stabilized zirconia (YSZ) thermal barrier coatings

Calcium magnesium aluminosilicate (CMAS) that is formed from the ingested deposits in gas turbines degrades thermal barrier coatings (TBCs), especially for the most widely used material; yttria-stabilized zirconia (YSZ). In the present work, we examine the behavior of yttrium aluminum garnet (YAG) as an alternative material for TBCs. CMAS interaction studies were conducted by making composite pellets of YAG-CMAS and YSZ-CMAS powders. These pellets, after being subjected to heat treatment between 1100 °C and 1500 °C were characterized by X-ray Diffraction (XRD), scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS), which showed YAG to be almost inert to CMAS whereas YSZ exhibited significant phase changes. To test the behavior of TBCs with YAG and 8YSZ as the topcoat material in a CMAS environment, cyclic furnace tests were conducted in which a controlled amount of CMAS was applied and then the samples were cycled to failure. In addition, to simulate the continuous accumulation of CMAS expected in service, a cyclic furnace test was devised in which a small dose of aqueous solution of CMAS was applied on TBC specimens at the start of every cycle until the samples were cycled to failure. In all these tests YAG TBCs outperformed YSZ in terms of durability. In conclusion, the mechanisms of CMAS attack are described and the relative resistance of YAG and YSZ is shown to be consistent with the Optical Basicity (OB) theory.

36 MATERIALS SCIENCE↗

Influence of oxygen on the optical and electrical properties of magnetron-sputtered indium tin oxide thin films at ambient temperature

Indium Tin Oxide (ITO) thin films are commonly used as transparent conductive layers in the production of solar cells. ITO films are typically heat-treated at temperatures exceeding 200 °C after magnetron sputtering to optimize the physical, optical, and electrical characteristics for photovoltaic devices. Here, this high temperature heating procedure greatly limits the use of potential substrates, particularly those comprised of low-temperature-rated polymers. Herein, we examine the physical, optical, and electrical transport effects of oxygen:argon plasmas during radio frequency magnetron sputtering of ITO on glass and flexible polymer surfaces without subsequent heat treatment. ITO thin films were characterized via sheet resistance testing, UV-Vis spectroscopy, X-ray diffraction, and scanning electron microscopy imaging. Sheet resistance measurements revealed an increase in surface resistance with increasing oxygen concentration during sputtering. UV-Vis optical transmittance measurements demonstrated an improvement in optical transmittance with an increase in oxygen concentration reaching a maximum transmittance at an oxygen concentration of 1-2 %. Most importantly, it was discovered that producing bilayers of ITO with pure argon sputtered plasmas followed by oxygen:argon plasmas produced ITO thin films with suitable resistance and transmittance without the need for high temperature post annealing. These results highlight a methodology for the deposition of ITO thin films on temperature sensitive substrates for flexible photovoltaics and low-cost module production.

36 MATERIALS SCIENCE↗

Role of Ammonium Hydroxide on Glucose Oxidase Immobilized in Metal–Azolate Framework-7 Enzyme Activity

Enzymes are nature’s catalysts, but their instability outside native environments limits practical applications. Metal–organic frameworks (MOFs) offer a promising platform for enzyme immobilization, enhancing stability, and reusability through their tunable porosity and crystallinity. While ZIF-based MOFs have been extensively studied, metal azolate framework-7 (MAF-7) remains largely unexplored for biomimetic mineralization. Its hydrophilic character makes it a promising alternative for enzyme encapsulation; however, the role of essential basic modulators such as ammonium hydroxide (NH 4 OH) on enzyme structure and function has not been investigated. Here, in this study, we examine the NH 4 OH mediated synthesis of glucose oxidase within MAF-7 using powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), cryogenic transmission electron microscopy (cryo-TEM), and enzyme assays. Our results show that NH 4 OH modulates crystal morphology, enzyme activity, and nucleation behavior, with higher concentrations leading to partial enzyme denaturation and reduced catalytic performance. By integrating time-resolved cryo-TEM with activity assays, we uncover how modulator concentration impacts early stage crystallization and enzyme folding, a mechanistic insight not previously demonstrated in MOF systems. These findings highlight modulator chemistry as a critical, underexplored variable in MOF synthesis, advancing rational design strategies for enzyme@MOFs (E@MOF) beyond ZIFs and toward more tunable, biocompatible frameworks like MAF-7.

36 MATERIALS SCIENCE↗

Thin-Film Deposition and Characterization of a Sn-Deficient Perovskite Derivative Cs 2 SnI 6

In this work, we describe details of a two-step deposition approach that enables the preparation of continuous and well-structured thin films of Cs 2 SnI 6 , which is a one-half Sn-deficient 0-D perovskite derivative (i.e., the compound can also be written as CsSn 0.5 I 3 , with a structure consisting of isolated SnI 6 4- octahedra). The films were characterized using powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), UV-Vis spectroscopy, photoluminescence (PL), photoelectron spectroscopy (UPS, IPES, XPS) and Hall effect measurements. UV-Vis and PL measurements indicate that the obtained Cs 2 SnI 6 film is a semiconductor with a band gap of 1.6 eV. This band gap was further confirmed by the UPS and IPES spectra, which were well reproduced by the calculated density of states with the HSE hybrid functional. The Cs 2 SnI 6 films exhibited n-type conduction with a carrier density of 6(1) × 10 16 cm -3 and mobility of 2.9(3) cm 2 /V·s. While the computationally-derived band structure for Cs 2 SnI 6 shows significant dispersion along several directions in the Brillouin zone near the band edges, the valence band is relatively flat along the $Γ$–X direction, indicative of a more limited hole minority carrier mobility compared to analogous values for the electrons. The ionization potential (IP) and electron affinity (EA) were determined to be 6.4 and 4.8 eV, respectively. The Cs 2 SnI 6 films show some enhanced stability under ambient air, compared to methylammonium lead (II) iodide perovskite films stored under similar conditions; however, the films do decompose slowly, yielding a CsI impurity. We discuss these findings in the context of suitability of Cs 2 SnI 6 for photovoltaic and related optoelectronic applications.

36 MATERIALS SCIENCE↗

First 14-Layer Twinned Hexagonal Perovskite Ba 14 Mn 1.75 Ta 10.5 O 42 : Atomic-Scale Imaging of Cation Ordering

Formation of hexagonal perovskite with mixed cubic and hexagonal stacking of AO 3 layers becomes more and more difficult when the number of layers in the stacking repeating unit increases. So far, the highest number of layers reported for twinned hexagonal perovskite is 12, with alternative 5 consecutive cubic layers and one hexagonal layer in the (ccccch) 2 sequence. Here, we present the unexpected formation of a 14-layer twinned hexagonal perovskite with a stacking sequence (cccccch) 2 for the BaO 3 layers on the Ba 14 Mn 1.75 Ta 10.5 O 42 (Ba 8 MnTa 6 O 24 ) composition, the first example of twinned hexagonal perovskite with a periodicity exceeding 12-layers. The B-cation and vacancy distributions are characterized by multiple efficient and complementary techniques including neutron and synchrotron powder diffraction, scanning transmission electron microscopy-high angle annular dark field (STEM-HAADF) imaging, and electron energy loss spectroscopy (EELS) and X-ray energy dispersive spectroscopy (EDS) elemental mapping. Atomic-resolution STEM-HAADF imaging and EELS/EDS elemental mapping enables direct observation of high-spin d 5 Mn 2+ cation ordering in the d 0 Ta 5+ host, thus demonstrating the great potential of this technique for probing cation ordering and performing structure determination. Moreover, atomic mapping allows for the observation of local defect structure variants, which can be a powerful tool for future new material design. The large high-spin Mn 2+ cation and Ta-vacancy pair formation in face-sharing octahedral sites play key roles on both the stabilization of this 14-layer twinned hexagonal perovskite structure and the Mn 2+ ordering in the central corner-sharing octahedral (CSO) positions within the five-consecutive CSO layers. Here, compared with the 8-layer twinned Ba 8 ZnTa 6 O 24 material, the low quality factor in microwave frequency and enhanced ultraviolet and visible light absorption of Ba 14 Mn 1.75 Ta 10.5 O 42 as well as the photocatalytic activity on water splitting are discussed in terms of the presence of high-spin Mn 2+ cations in the structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization and Phase Transformations of Aluminum (Oxy)hydroxide Polymorphs in Caustic Aqueous Solution

Gibbsite, bayerite, and boehmite are important aluminum (oxy)hydroxide minerals in nature and have been widely deployed in various industrial applications. They are also major components in caustic nuclear wastes stored at various U.S. locations. Knowledge of their crystallization and phase transformation processes contributes to understanding their occurrence and could help optimize waste treatment processes. While it has been reported that partial conversion of bayerite and gibbsite to boehmite occurs in basic solutions at elevated temperatures, systematic studies of factors affecting the phase transformation as well as the underlying reaction mechanisms are non-existent, particularly in highly alkaline solutions. We explored the effects of sodium hydroxide concentrations (0.1~3 M), reaction temperature (60~100 ?) and aluminum concentrations (0.1~1 M) on the crystallization and transformation of these aluminum (oxy)hydroxides. Detailed structural and morphological characterization by X-ray diffraction (XRD), scanning electron microscopy (SEM), and nuclear magnetic resonance (NMR) spectrometry revealed that these processes depend largely on the reaction temperature and the Al/OH- ratio. When 1 = Al/OH- = 2.5, the reactions favor formation of high crystallinity precipitates, whereas at Al/OH- ratio ? 2.5 precipitation ceases unless the Al concentration is higher than 1 M. We identified pseudoboehmite, bayerite and gibbsite as intermediate phases to bayerite, gibbsite and boehmite, respectively, all of which transform via dissolution-reprecipitation. Gibbsite transforms to boehmite in both acidic and weak caustic environments at temperatures above 80 oC. However, a ‘bar-shaped’ gibbsite morphology dominates in highly caustic environments (3 M NaOH). The findings enable a robust basis for selection of various solid phases by tuning the reaction conditions.

aluminum (oxy)hydroxide polymorphs, crystallizatio↗

Single-Doped and Multidoped Transition-Metal (Mn, Fe, Co, and Ni) ZnO and Their Electrocatalytic Activities for Oxygen Reduction Reaction

The electrochemical oxygen reduction reaction (ORR) is the limiting half-reaction of fuel cells, which is mediated by using platinum-based catalysts. Hence, the development of low-cost, active ORR catalysts is highly required to make fuel cell technology commercially available. In this report, transition-metal (TM; Mn, Fe, Co, and Ni) single-doped and multidoped (MD) ZnO nanocrystals (ZNs) were prepared for use as ORR catalysts using a simple precipitation method. The effects of single doping and multidoping on the structure, morphology, and properties of the TM-doped ZNs were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence, X-ray photoelectron microscopy, electron paramagnetic resonance, and Raman and photoluminescence (PL) spectroscopies. The XRD results reveal that synthesized ZnO samples retained a pure hexagonal wurtzite crystal structure, even at high levels of multidoping (nominal 20%). SEM analyses show that the morphology of the prepared ZNs varies with the doping elements, doping mode, and amounts of doping. The observation of peak shifting and peak intensity changes in Raman studies confirms the presence of dopants in ZnO. The PL investigation reveals that the incorporation of dopants into the ZnO structure increases the oxygen vacancies within the materials. The highest oxygen vacancies were present in Mn-doped ZnO and 15% MD ZnO among the single-doped and MD samples, respectively. Linear-sweep voltammetry studies conclude that doped ZnO shows enhanced ORR activity compared to the undoped samples. The Mn-doped ZnO and 15% MD ZnO exhibited the highest ORR activity among the prepared single-doped and MD ZN samples, respectively. In comparison, single doping showed better ORR activity than the multidoping system. The enhanced ORR activity of the synthesized ZN materials correlates with the amount of oxygen vacancies present in the samples. Finally, the enhanced activity of TM-doped ZnO suggests that these materials can be used as potential, low-cost electrocatalysts for ORR in fuel cell technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unraveling Gibbsite Transformation Pathways into LiAl-LDH in Concentrated Lithium Hydroxide

The intercalation of lithium (Li+) ions into metallic hydroxides (e.g. gibbsite, Al(OH)3) facilitates the synthesis of layered double hydroxides. Caustic environments, such as in lithium hydroxide (LiOH) solutions, present additional pathways beyond the intercalation of ions, specifically dissolution/precipitation processes. Herein, the phase transformation Al(OH)3 to lithium aluminum hydroxide dihydrate, Li[Al(OH)3)]2OH•2H2O in partially deuterated LiOH solutions is tracked through multinuclear, magic angle spinning, high-field nuclear magnetic resonance spectroscopy (27Al and 6Li MAS-NMR) , X-ray diffraction, and scanning electron microscopy of harvested solids. At high magnetic fields (19.975 T), 27Al MAS-NMR enabled detection and quantification of the reactive interface between Al(OH)3 and Li[Al(OH)3)]2OH•2H2O. 6Li MAS-NMR spectra collected on the harvested solids exhibited exchange mediated narrowing as the reaction time progressed, consistent with transport of Li+ ions between the interface and the bulk Li[Al(OH)3)]2OH•2H2O. Complimentary in-situ 27Al MAS-NMR at lower magnetic fields (7.046 T) utilized unique rotors capable of simultaneous resolution of solution and solid state Al-species in caustic environments. The reaction between Al(OH)3 (0.5 M) and LiOH (3 M) initially exhibited greater dissolution and formation of Al(OH)4- than the precipitation. Over several hours, the supersaturated Al(OH)4- solution precipitated Li[Al(OH)3)]2OH•2H2O. Simultaneous, in-situ observations of the solid component tracked the formation of Li[Al(OH)3)]2OH•2H2O evident by an increase in signal and narrowing of the Oh resonance. These results provides insight into Al precipitation in alkaline media with applications ranging from the reduction of Al content in Hanford site, high-level radioactive waste (HLRW) to the precipitation of LDH materials for application as catalyst materials, drug delivery devices, and ion-ion exchangers.

Graham, Trenton R.↗

Stability of Catalyzed Magnesium Hydride Nanocrystalline During Hydrogen Cycling. Part II: Microstructure Evolution

In Part I, the cyclic stabilities of the kinetics of catalyzed MgH2 systems including MgH2–TiH2, MgH2–TiMn2, and MgH2–VTiCr were investigated, showing stable kinetics at 300 °C but deteriorations of the hydrogenation kinetics at temperatures below 150 °C. The present Part II describes the characterization of uncycled and cycled catalyzed MgH2 by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis. XRD analysis shows the crystallite sizes of the Mg and MgH2 significantly increased after the cycling. The mean crystallite sizes of the catalysts (TiH2 and VTiCr) increased moderately after the cycling. SEM and TEM imaging were used to compare the microstructures of uncycled (as-milled) and cycled materials, revealing a drastic change of the microstructure after 100 cycles. In particular, results from energy-dispersive spectroscopy (EDS) mapping show that a change of distribution of the catalyst particles in the Mg and MgH2 phase occurred during the cycling.

Zhou, Chengshang↗

Highly Efficient Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol over Gold Supported on Zinc Oxide Materials

We used Au/ZnO catalysts for liquid-phase selective hydrogenation of cinnamaldehyde to cinnamyl alcohol and compared with Au/Fe 2 O 3 catalysts. To investigate the influence of the support on the hydrogenation activity and selectivity, three different Au/ZnO catalysts were synthesized, including Au/rod-tetrapod ZnO, Au/porous ZnO, and Au/ZnO-CP prepared using a coprecipitation method. Moreover, the influence of calcination temperature was also systematically investigated in this study. The characterization of Au/ZnO catalysts was performed using ICP, N 2 adsorption/desorption isotherms, X-ray diffraction, scanning transmission electron microscopy, and X-ray photoelectron spectroscopy. Among all the supported Au catalysts prepared in this study, Au/ZnO-CP exhibits both the highest hydrogenation activity and selectivity. Using a 1.5% Au/ZnO-CP catalyst, 100% selectivity could be achieved with 94.9% conversion. Finally, we find that the Au particle (size and shape), the ZnO support (size and surface texture) and the interaction between Au and ZnO are three important parameters for achieving a highly efficient Au/ZnO catalyst.

36 MATERIALS SCIENCE↗

Atomic Structure of Submonolayer NaCl Grown on Ag(110) Surface

In this work, we report results on the growth of an NaCl film on Ag(110) under ultrahigh vacuum conditions. At room temperature, low-energy electron diffraction and scanning tunneling microscopy show that the NaCl film forms a (4×1) superstructure. At RT, the film consists of small-sized islands that coalesce into larger islands at 410 K. These large islands preserve the (4×1) superstructure and cover the entire surface. The apparent heights obtained from the STM images show that the initial thickness of the NaCl islands is one atomic layer, and they present a very small height corrugation. The density functional theory calculations, with and without the inclusion of van der Waals effects, confirm the coexistence of two domains in agreement with the observed structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗