Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Electron microscopy of GaAs-based structures with InAs and As quantum dots separated by an AlAs barrier

Electron microscopy studies of GaAs-based structures grown by molecular beam epitaxy and containing arrays of semiconductor InAs quantum dots and metal As quantum dots are performed. The array of InAs quantum dots is formed by the Stranski-Krastanov mechanism and consists of vertically coupled pairs of quantum dots separated by a GaAs spacer 10 nm thick. To separate the arrays of semiconductor and metal quantum dots and to prevent diffusion-induced mixing, the array of InAs quantum dots is overgrown with an AlAs barrier layer 5 or 10 nm thick, after which a GaAs layer is grown at a comparatively low temperature (180 Degree-Sign C). The array of As quantum dots is formed in an As-enriched layer of the low-temperature GaAs by means of post-growth annealing at 400-760 Degree-Sign C for 15 min. It is established that the AlAs barrier layer has a surface profile corresponding to that of a subbarrier layer with InAs quantum dots. The presence of such a profile causes the formation of V-shaped structural defects upon subsequent overgrowth with the GaAs layer. Besides, it was obtained that AlAs layer is thinned over the InAs quantum dots tops. It is shown that the AlAs barrier layer in the regions between the InAs quantum dots effectively prevents the starting diffusion of excess As at annealing temperatures up to 600 Degree-Sign C. However, the concentration of mechanical stresses and the reduced thickness of the AlAs barrier layer near the tops of the InAs quantum dots lead to local barrier breakthroughs and the diffusion of As quantum dots into the region of coupled pairs of InAs quantum dots at higher annealing temperatures.

36 MATERIALS SCIENCE↗

Surface functionalization of single-layer and multilayer graphene upon ultraviolet irradiation

The process of oxidation of single-layer and multilayer graphene films upon ultraviolet irradiation of the structure in water vapor was studied. The systematic features and distinctions between changes in the topographic and optical properties of graphene films composed of different numbers of layers were established. The possibility of surface functionalization accompanied by modification of the energy structure of graphene was shown. Differences between single-layer and multilayer graphene films in the mechanisms of oxidation on ultraviolet irradiation are discussed and analyzed. Correlation of the topographic imperfections of the properties of the graphene material with its structural defects observed in Raman spectra was shown.

36 MATERIALS SCIENCE↗

Change in the Character of Biaxial Stresses with an Increase in x from 0 to 0.7 in Al{sub x}Ga{sub 1–} {sub x}N:Si Layers Obtained by Ammonia Molecular Beam Epitaxy

The deformation mode and defect structure of Al{sub x}Ga{sub 1–} {sub x}N:Si epitaxial layers (x = 0–0.7) grown by molecular beam epitaxy and doped with Si under a constant silane flux are studied by X-ray diffractometry. The concentration of Si atoms in the layers measured by secondary ion mass spectrometry is (4.0–8.0) × 10{sup 19} cm{sup –3}. It is found that the lateral residual stresses are compressive at x < 0.4 and become tensile at x > 0.4. The stresses after the end of growth are estimated and the contribution to the deformation mode of the layers of both the coalescence of nuclei of the growing layer and misfit stresses in the layer–buffer system are discussed. It is found that the density of vertical screw and edge dislocations are maximal at x = 0.7 and equal to 1.5 × 10{sup 10} and 8.2 × 10{sup 10} cm{sup –2}, respectively.

36 MATERIALS SCIENCE↗

Mechanism of the Generation of Donor–Acceptor Pairs in Heavily Doped n-ZrNiSn with the Ga Acceptor Impurity

The nature of the mechanism of the simultaneous generation of donor–acceptor pairs under heavy doping of n-ZrNiSn intermetallic semiconductor with the Ga acceptor impurity is established. Such spatial arrangement in the crystal lattice of ZrNiSn{sub 1–x}Ga{sub x} is found when the rate of movement of the Fermi level εF found from calculations of the density distribution of electron states coincides with that experimentally established from dependences lnρ(1/T). It is shown that when the Ga impurity atom (4s{sup 2}4p{sup 1}) occupies the 4b sites of Sn atoms (5s{sup 2}5p{sup 2}), structural defects of both acceptor nature and donor nature in the form of vacancies in the 4b site are simultaneously generated. The results are discussed in the scope of the Shklovskii–Efros model of a heavily doped and compensated semiconductor.

36 MATERIALS SCIENCE↗

Dielectric Properties of Nanocrystalline Tungsten Oxide in the Temperature Range of 223–293 K

The dielectric properties of nanocrystalline tungsten oxide are studied in the temperature range of 223–293 K and in the frequency range ν = 10{sup –2}–10{sup 6} Hz. Powders of WO{sub 3} with particle sizes of 110, 150, and 200 nm are prepared by the heat treatment of ammonium paratungstate at various temperatures. It is established that the frequency dependences of the conductivity for all samples increase with an increase in frequency, while the polarization characteristics ε'(ν) and ε'(ν) decrease. It is found that the frequency dependences of the conductivity are described by a function of the form ν{sup s} with an index in the range of (0.83–0.90) ± 0.01, which is characteristic of the “hopping” mechanism of charged-particle motion (complexes) over localized states confined by potential barriers and structural defects.

36 MATERIALS SCIENCE↗

The Model of Decomposition of a Fe–Cu Alloy with Concentration-Depending Interatomic Interactions

The thermodynamics and kinetics of decomposition of a Fe–Cu alloy are investigated in the context of a simple ab initio parameterization model taking into account the concentration dependence of the magnetic contribution to the free energy. It is shown that taking into account a difference between the short-range and long-range magnetic orders near the Curie temperature is very important for calculating the solubility of copper in iron. The solubility of copper in bcc iron and the stability limit of a homogeneous state (physical spinodal) are evaluated via the kinetic Monte Carlo method. The impact of structural defects (dislocations and grain boundaries) on these curves, as well as on the kinetic time–temperature—transformation (TTT) diagram, is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Upconversion Luminescence of Gd{sub 2}O{sub 3} Nanocrystals Doped with Er{sup 3+} and Yb{sup 3+} Ions

The upconversion luminescence (UCL) of nanocrystalline gadolinium oxide (Gd{sub 2}O{sub 3}) doped with Er{sup 3+} and Yb{sup 3+} ions has been studied in the temperature range of 90–400 K. The nanocrystals were synthesized by chemical vapor deposition and possessed a cubic crystalline structure with an average particle size within 48–57 nm. It is established that the USL intensity in the red ({sup 4}F{sub 9/2} → {sup 4}I{sub 15/2} transition in Er3+ ion) and green ({sup 4}S{sub 3/2} → {sup 4}I{sub 15/2} transition) spectral regions depends on the sample temperature and concentration of dopant ions, as well as on the additional structural defects (anion vacancies) created in the crystal lattice by the introduction of Zn{sup 2+} ions or irradiation with high-energy (10 MeV) electrons. The luminescence efficiency and spectrum of the upconversion phosphor are determined by energy transfer processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic and Luminescent Properties of Barium Fluoride Nanopowder Obtained by Electron-Beam Evaporation in Low-Pressure Gas

Mesoporous amorphous-crystalline nanopowders of BaF{sub 2} with the specific surface area up to 34.8 m{sup 2}/g were obtained using evaporation by a pulsed electron beam in vacuum. Influence of the thermal annealing of the BaF{sub 2} nanoparticles in air at the temperatures from 200 to 900°C on the size and morphology of the particles and changes in their magnetic and luminescent properties was studied. The paramagnetic response of the BaF{sub 2} nanopowder was found to transform to the ferromagnetic response after annealing at 900°C. The appearance and transformation of the magnetic response in nanopowders made of BaF{sub 2}, which is diamagnetic as the bulk material, are ascribed to the appearance of radiation-induced and structural defects during the synthesis process by pulsed electron-beam evaporation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Influence of the InAlAs Layer Surface Morphology on the Temperature Dependence of Parameters of Au/Ti/n-InAlAs(001) Schottky Diodes

Growth-related structural defects present on the surface of InAlAs layers grown by molecular beam epitaxy on InP(001) substrates influence the temperature dependences of the current–voltage characteristics of Au/Ti/InAlAs Schottky barriers. It is established that these defects in the form of pits cause the appearance of regions with reduced barrier height. At a surface density of ≥10{sup 7} cm{sup –2}, these defects significantly influence the parameters of the Schottky barriers at temperatures below 200 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitons in Single-Walled Carbon Nanotubes and Their Dynamics

Understanding exciton dynamics in single-walled carbon nanotubes (SWCNTs) is essential to unlocking the many potential applications of these materials. This review summarizes recent progress in understanding exciton photophysics and, in particular, exciton dynamics in SWCNTs. We outline the basic physical and electronic properties of SWCNTs, as well as bright and dark transitions within the framework of a strongly bound one-dimensional excitonic model. We discuss the many facets of ultrafast carrier dynamics in SWCNTs, including both single-exciton states (bright and dark) and multiple-exciton states. Photophysical properties that directly relate to excitons and their dynamics, including exciton diffusion lengths, chemical and structural defects, environmental effects, and photoluminescence photon statistics as observed through photon antibunching measurements, are also discussed. Finally, we identify a few key areas for advancing further research in the field of SWCNT excitons and photonics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution of microstructural disorder in annealed bismuth telluride nanowires

Controlling the distribution of structural defects in nanostructures is important since such defects can strongly affect critical properties, including thermal and electronic transport. However, characterizing the defect arrangements in individual nanostructures is difficult because of the small length scales involved. Here, we investigate the evolution of microstructural disorder with annealing in electrochemically deposited Bi2Te3 nanowires, which are of interest for thermoelectrics. We combine Convergent Beam Electron Diffraction (CBED) and Scanning Transmission Electron Microscopy (STEM) to provide the necessary spatial and orientational resolution. We find that despite their large initial grain sizes and strong Formula crystallographic texturing, the as-deposited nanowires still exhibit significant intragranular orientational disorder. Annealing drives both grain growth and a significant reduction in the intragranular disorder. The results are discussed in the context of the existing understanding of the initial microstructure of electrodeposited materials and the understanding of annealing microstructures in both electrochemically deposited and bulk-deformed materials. Finally, this analysis highlights the importance of assessing both the grain size and intragranular disorder in understanding the microstructural evolution of individual nanostructures.

36 MATERIALS SCIENCE↗

pnnl/galas

Codebase for analyzing large atomistic simulation results using graph analytics. Analysis of large molecular simulations is difficult due to size and memory constrains in commonly used analysis software. This code was developed to analyze an ~8 million atom polycrystalline Al system under shear, with a particular emphasis on identifying defect structures. This code applies graph theory to reduce the system to components of interest and applies associated algorithms to characterize these components.

Pope, Jenna (Bilbrey)↗

2D Polyhedral Template Matching for Atomic Resolution Microscopy

SAND2024-13879O The 2D Polyhedral Template Matching for Atomic Resolution Microscopy is a suite of functions for analyzing atomic resolution electron microscopy images using the 2D polyhedral template matching (2D-PTM) method. This software analyzes atomic resolution microscopy data from electron microscopic imaging or scanning probe microscopies. The primary application is for identifying different crystal phases, crystal orientations, and defect structures obtained in such atomic resolution images. Written in MATLAB and starting from an atomic resolution image, the code identifies the positions of atomic intensity peaks. It then matches predefined structural templates to the local atomic environments. Outputs include the local structural identification, the template scaling factor and rotation angle, root-mean-squared deviation (RMSD), and centrosymmetry parameter.

Medlin, Douglas↗

Defects in MX2 Phases (DMX) Dataset: STEM Digital Twins

DFT is used to optimize defects in monolayer MX2 phases. We calculate ~600 optimized defect structures, then use multislice simulations in abTEM to generate STEM digital twins, which can be used to train experimental ML. The reference paper for procedures and demonstration of their utility is https://arxiv.org/abs/2305.02917, and the images here correspond with the discussed Messy dataset.

36 MATERIALS SCIENCE↗

Defects in MX2 (DMX) 2.0: STEM Digital Twins

DFT is used to optimize defects in monolayer MX2 phases. We calculate ~600 optimized defect structures, then use multislice simulations in abTEM to generate STEM digital twins, which can be used to train experimental ML. The reference paper for procedures and demonstration of their utility is https://arxiv.org/abs/2305.02917, and the images here correspond with the discussed Messy dataset. Version 2 includes an auxiliary dataset matched with experiment.

36 MATERIALS SCIENCE↗

Modeling Helium Segregation to the Surfaces of Plasma-Exposed Tungsten as a Function of Temperature and Surface Orientation

We provide a description of the dependence on surface crystallographic orientation and temperature of the segregation of helium implanted with energies consistent with low-energy plasma exposure to tungsten surfaces. Here, we describe multiscale modeling results based on a hierarchical approach to scale bridging that incorporates atomistic studies based on a reliable interatomic potential to parameterize a spatially dependent drift-diffusion-reaction cluster-dynamics code. An extensive set of molecular dynamics (MD) simulations has been performed at 933 K and/or 1200 K to determine the probabilities of desorption and modified trap mutation that occurs as small, mobile Hen (1 ≤ n ≤ 7) clusters diffuse from the near-surface region toward surfaces of varying crystallographic orientation due to an elastic interaction force that provides the thermodynamic driving force for surface segregation. These near-surface cluster dynamics have significant effects on the surface morphology, the near-surface defect structures, and the amount of helium retained in the material upon plasma exposure, for which we have developed an extensive MD database of cumulative evolution during high-flux helium implantation at 933 K, which we compare to our properly parameterized cluster-dynamics model. This validated model is then used to evaluate the effects of temperature on helium retention and subsurface helium clustering.

Blondel, Sophie↗

Investigation of thermal transport in composites and ion beam irradiated materials for nuclear energy applications

Thermal transport in materials used for energy applications is a physical process directly tied to performance and reliability. As a result, a great deal of effort has been devoted to understanding thermal transport in materials whose ability to conduct heat is critical. Here in this paper, our objective is to discuss the utility of laser-based thermoreflectance (TR) approaches that provide microscale measurement of thermal transport. We provide several examples that implement the TR technique to investigate thermal transport in materials used in nuclear energy applications. First, we discuss utility of this technique to measure thermal conductivity in ion irradiated ceramic materials during investigations where the primary objective is to understand the impact of radiation induced crystalline structure defects on thermal transport. We also present the capability of TR approach to resolve thermal conductivity of each layer in tristructural isotropic fuel, silicon carbide fiber composites, and 2nd phase precipitates in uranium silicide. Finally, the ability to measure interface thermal resistance between adjacent layers in composites is demonstrated.

36 MATERIALS SCIENCE↗

Nanoindentation of high-purity vapor deposited lithium films: The elastic modulus

Nanoindentation has been used to measure the elastic modulus of 5 and 18 μm thick high-purity vapor deposited polycrystalline lithium films at 31 °C. Over indentation depths ranging from 150 to 1100 nm, the modulus is found to vary with film thickness from 9.8 GPa ± 11.9% to 8.2 GPa ± 14.5%. These results are well within the range of lithium's orientation dependent elastic modulus, which spans approximately 3.1 to 21.4 GPa. The measured values may also indicate (111) and (100) texture for the 5 and 18 μm thick films, respectively. The potential effects of pileup and surface contamination are found to be negligible if any at all. Small but discernible changes in damping capability near the free surface may provide insight into the subsurface defect structure and the potential for localized heating. In conclusion, numerous experimental challenges are addressed and key metrics are used to validate the measured elastic modulus.

36 MATERIALS SCIENCE↗