Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Analysis of the heliospheric current sheet at Earth's orbit and model comparisons

IMP 8 magnetic field data for the first half of the year 1994, i.e., for about 6 solar rotations, are analyzed around regions of sector boundary crossings with the purpose of obtaining both gross- and fine-scale characteristics of the related heliospheric current sheets separating the observed sectors. For purposes of estimating the attitudes of the normals to the sector boundaries. analysis intervals (sometimes 30 min or more in length) allowing the field to fully complete an excursion of about 180 deg were used in the study, which consisted of variance analyses of the field within those intervals. The resulting boundary normals were analyzed and compared to known (generic) models of projected heliospheric current sheets and to a coronal field model for the same time period. One of the most outstanding features of the resulting ensemble of estimated boundary normals for this period is that they strongly prefer low inclinations, indicating that the observations do not support a 1 AU model that predicts a current sheet whose surface is approximately parallel with the sun's equator, such as the 'sombrero' model. They instead support a model that predicts a relatively high inclination current sheet at 1 AU. Also the normals assume a surprisingly large range of longitudes, somewhat favoring those consistent with a Parker model (45 deg and 225 deg) and/or radial alignment (0 deg and 180 deg). These boundary structures, as defined, are shown typically to be as broad as several hundred proton gyroradii, but having embedded within them very thin structures associated with stronger currents. Such thin structures have normals usually differing markedly from the gross boundary. For some crossings there are indications of a wave-like structure in the current sheet as it passed the spacecraft.

Lepping, R. P.↗

An evaluation of the structure of tropical intraseasonal oscillations in three general circulation models

The attributes for the simulation of tropical intraseasonal oscillations in the 30 to 60 day range by three GCMs are compared with analyses of the European Center for Medium-Range Weather Forecasts. Models under consideration include the Goddard Laboratory of Atmospheric sciences (GLAS), Goddard Laboratory for Atmospheres (GLA), and UCLA GCMs. They are characterized by the same resolutions of four degrees latitude by five degrees longitude with 9 levels. Observations reveal that the eastward traveling planetary scale structure becomes more stationary over the Indonesian region and accelerates over the Central Pacific. In the tropics a Kelvin wave-type structure is found to be dominant near the center of the oscillation. The simulated winds are realistic although the meridional component is too strong, especially in the GLA GCM. The differences in the structure of the oscillation in the GLAS GCM and GLA GCM are considered to be a consequence of the different numerical schemes used. The GCMs are characterized by preferred zones for diabatic heating, with a turn-on heating occurring when the rising branch of the intraseasonal oscillation passes over these convective regions.

Park, Chung-Kyu↗

Integrated approach for active coupling of structures and fluids

Strong coupling of structure and fluids is common in many engineering environments, particularly when the flow is nonlinear and very sensitive to structural motions. Such coupling can give rise to physically important phenomena, such as a dip in the transonic flutter boundary of a wing. The coupled phenomenon can be analyzed in closed form for simple cases that are defined by linear structural and fluid equations of motion. However, complex cases defined by nonlinear equations pose a more difficult task for solution. It is important to understand these nonlinear coupled problems, since they may lead to physically important new phenomena. Flow discontinuities, such as a shock wave, and structural discontinuities, such as a hinge line of a control surface of a wing, can magnify the coupled effects and give rise to new phenomena. To study such a strongly coupled phenomenon, an integrated approach is presented in this paper. The aerodynamic and structural equations of motion are simultaneously integrated by a time-accurate numerical scheme. The theoretical simulation is done using the time-accurate unsteady transonic aerodynamic equations coupled with modal structural equations of motion. As an example, the coupled effect of shock waves and hinge-line discontinuities are studied for aeroelastically flexible wings with active control surfaces. The simulation in this study is modeled in the time domain and can be extended to simulate accurately other systems where fluids and structures are strongly coupled.

Guruswamy, Guru P.↗

Gamma-Ray Burst Afterglows as Probes of Environment and Blast Wave Physics. II. The Distribution of rho and Structure of the Circumburst Medium

We constrain blast wave parameters and the circumburst media ofa subsample of 10 BeppoSAX gamma-ray bursts (GRBs). For this sample we derive the values of the injected electron energy distribution index, p, and the density structure index of the circumburst medium, k, from simultaneous spectral fits to their X-ray, optical, and NIR afterglow data. The spectral fits have been done in count space and include the effects ofmetallicity, and are compared with the previously reported optical and X-ray temporal behavior. Using the blast wave model and some assumptions which include on-axis viewing and standard jet structure, constant blast wave energy, and no evolution of the microphysical parameters, we find a mean value ofp for the sample as a whole of 9.... oa -0.003.0" 2 a_ statistical analysis of the distribution demonstrates that the p-values in this sample are inconsistent with a single universal value forp at the 3 _ level or greater, which has significant implications for particle acceleration models. This approach provides us with a measured distribution ofcircumburst density structures rather than considering only the cases of k ----0 (homogeneous) and k - 2 (windlike). We find five GRBs for which k can be well constrained, and in four of these cases the circumburst medium is clearly windlike. The fifth source has a value of 0 < k < 1, consistent with a homogeneous circumburst medium.

Starling, R. L. C.↗

Modeling and simulation of Ultrasonic Guided Waves propagation in the fluid-structure domain by a monolithic approach

The present study introduces the coupled multiphysics model as part of the structural health monitoring (SHM) system. In particular, the Ultrasonic Guided Waves (UGWs) propagation is tracked in order to identify the damage to the structure. For this purpose, a multiphysics mathematical model is proposed. The model constitutes a monolithically coupled system of acoustic and elastic wave equations (WpFSI problem) where the wave signal displacement measurements are analyzed as the UGWs propagates in the solid, fluid and their interface. The ultimate goal of this paper is to explore and develop the efficient numerical solution of the WpFSI problem using the finite element method. A detailed description of the modeling framework and conditions that facilitate the coupling is provided. To couple the displacement-based acoustic wave equations for the isothermal fluid with elastic wave equations for the Saint Venant-Kirchhoff material model, the present study uses a monolithic solution algorithm. In particular, at each time step, wave equations are transformed to a fixed reference configuration via the arbitrary Lagrangian-Eulerian (ALE) mapping and automatically adopt the boundary conditions from the previous time step. The implementation is accomplished via the finite element library deal.II (Goll et al., 2017) based software toolbox DOpElib (Bangerth et al., 2007) which provides modularized higher level algorithms. Beyond SHM systems, the model is relevant for problems from biomechanics and biomedicine, vibromechanics, poroelasticity as well as subsurface and porous media flow. Here, the model developed here serves as a first step towards the on-line SHM system modeling, where structural dynamics are accounted for.

42 ENGINEERING↗

Twinned magnetite in granitic samples from the Siljan impact structure, Sweden

Impact cratering is a ubiquitous process throughout the solar system and has played a key role for the geologic evolution of Earth and other planets [1]. Magnetic anomalies are common characteristics of impact craters [2], so understanding how magnetite (Fe23+Fe2+O42-), an important magnetic carrier in both terrestrial and extraterrestrial rocks, is affected by shock waves, especially structurally and magnetically, is crucial. Magnetic minerals have been studied to gain insight into the geologic evolution of Mars, with specific focus including understanding the Martian crustal structure and the oxidization state of Martian rocks (e.g., [3,4,5]). Shock waves permanently alter the intrinsic magnetic properties of rocks (e.g., [6]), as do twinning in natural environments with less extreme P/T conditions [7]. In fact, pressure conditions induced by impacts have been suggested to explain demagnetization signatures observed around Martian impact basins [8]. It is still poorly understood what effects shock has on the crystallographic structure of magnetite and thus it’s intrinsic magnetic properties, and , how that affects the bulk magnetic properties of rocks (e.g., [9]). Limited experimental studies have investigated the effects of shock compression on magnetite, especially with the aim of describing crystallographic deformation (e.g., [9] and references therein). In this work we report preliminary results of an investigation of microstructures in magnetite, an “unconventional” mineral in shock studies, in granitic samples from the ca. 380 Ma ~52 km-in-diameter Siljan impact structure, located in south-central Sweden.

shock metamorphism↗

Cavitation erosion prediction based on analysis of flow dynamics and impact load spectra

Cavitation erosion is the consequence of repeated collapse-induced high pressure-loads on a material surface. The present paper assesses the prediction of impact load spectra of cavitating flows, i.e., the rate and intensity distribution of collapse events based on a detailed analysis of flow dynamics. Data are obtained from a numerical simulation which employs a density-based finite volume method, taking into account the compressibility of both phases, and resolves collapse-induced pressure waves. To determine the spectrum of collapse events in the fluid domain, we detect and quantify the collapse of isolated vapor structures. As reference configuration we consider the expansion of a liquid into a radially divergent gap which exhibits unsteady sheet and cloud cavitation. Analysis of simulation data shows that global cavitation dynamics and dominant flow events are well resolved, even though the spatial resolution is too coarse to resolve individual vapor bubbles. The inviscid flow model recovers increasingly fine-scale vapor structures and collapses with increasing resolution. We demonstrate that frequency and intensity of these collapse events scale with grid resolution. Scaling laws based on two reference lengths are introduced for this purpose. We show that upon applying these laws impact load spectra recorded on experimental and numerical pressure sensors agree with each other. Furthermore, correlation between experimental pitting rates and collapse-event rates is found. Locations of high maximum wall pressures and high densities of collapse events near walls obtained numerically agree well with areas of erosion damage in the experiment. The investigation shows that impact load spectra of cavitating flows can be inferred from flow data that captures the main vapor structures and wave dynamics without the need for resolving all flow scales.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Frequency splitter based on the directional emission from surface modes in dielectric photonic crystal structures

We demonstrate the numerical design and the experimental validation of frequency dependent directional emission from a dielectric photonic crystal structure. The wave propagates through a photonic crystal line-defect waveguide, while a surface layer at the termination of the photonic crystal enables the excitation of surface modes and a subsequent grating layer transforms the surface energy into outgoing propagating waves of the form of a directional beam. Furthermore, the angle of the beam is controlled by the frequency and the structure operates as a frequency splitter in the intermediate and far field region.

42 ENGINEERING↗

Nanometer Structures for Fuel Cells and Displays, etc (Final Report)

Low-energy ion beam bombardment induced self-assembly has been used to form various periodic nano-size wave-ordered structures (WOS). Such WOS can be used as hard etching masks to produce nanowire arrays, trenches etc., on other materials by means of traditional etching or ion sputtering. These periodic nano-size structures have a wide range of applications, including flat panel displays, optical electronics, and clean energy technologies (solar and fuel cells, lithium batteries). In order to achieve high throughput of the above processes, a large area RF-driven multicusp nitrogen ion source has been developed for the application of nitrogen ion beam induced surface modification. An integrated ion beam system, which can house either a large area RF-driven multicusp ion source or a commercially available microwave ion source (Roth & Rau AG Tamiris 400-f) have been designed, manufactured, assembled, and tested.

30 DIRECT ENERGY CONVERSION↗

Submerged Fatigue Testing of Marine Energy Advanced Materials

Marine energy structures are typically made of advanced composite materials and are subjected to extreme ocean environments in service. In extreme ocean environments, seawater currents and waves load structures repeatedly, which cause two environmental conditions: water intrusion and mechanical fatigue. In prior research, the two environmental conditions were applied sequentially, where composite specimens were aged and then mechanically tested. To understand the combined effects of dynamic loading and water intrusion on composite materials, the present study involves the static and fatigue four-point bend testing of composite coupons in a water tank. The water tank was designed and built to fit either a 100 kN or a 250 kN load frame. Flexural strength value, cycles to failure, and failure mode results from submerged fatigue testing will be used to inform marine energy structure designs. The coupon-scale test method will be used to scale up to and inform methods for subsequent subcomponent testing and standards development. The benefits of designing marine energy structures to informed standards are decreased lifetime costs and increased reliability and energy production, ultimately leading to a sustainable and low-carbon energy system.

composite materials↗

Submerged Fatigue Testing of Marine Energy Advanced Materials: Preprint

Marine energy structures are typically made of advanced composite materials and are subjected to extreme ocean environments in service. In extreme ocean environments, seawater currents and waves load structures repeatedly, which cause two environmental conditions: water intrusion and mechanical fatigue. In prior research, the two environmental conditions were applied sequentially, where composite specimens were aged and then mechanically tested. To understand the combined effects of dynamic loading and water intrusion on composite materials, the present study involves the static and fatigue four-point bend testing of composite coupons in a water tank. The water tank was designed and built to fit either a 100 kN or a 250 kN load frame. Flexural strength value, cycles to failure, and failure mode results from submerged fatigue testing will be used to inform marine energy structure designs. The coupon-scale test method will be used to scale up to and inform methods for subsequent subcomponent testing and standards development. The benefits of designing marine energy structures to informed standards are decreased lifetime costs and increased reliability and energy production, ultimately leading to a sustainable and low-carbon energy system.

composite materials↗

Submerged Fatigue Testing of Marine Energy Advanced Materials

Marine energy structures are typically made of advanced composite materials and are subjected to extreme ocean environments in service. In extreme ocean environments, seawater currents and waves load structures repeatedly, which cause two environmental conditions: water intrusion and mechanical fatigue. In prior research, the two environmental conditions were applied sequentially, where composite specimens were aged and then mechanically tested. To understand the combined effects of dynamic loading and water intrusion on composite materials, the present study involves the static and fatigue four-point bend testing of composite coupons in a water tank. The water tank was designed and built to fit either a 100 kN or a 250 kN load frame. Flexural strength value, cycles to failure, and failure mode results from submerged fatigue testing will be used to inform marine energy structure designs. The coupon-scale test method will be used to scale up to and inform methods for subsequent subcomponent testing and standards development. The benefits of designing marine energy structures to informed standards are decreased lifetime costs and increased reliability and energy production, ultimately leading to a sustainable and low-carbon energy system.

composite materials↗

Sub-photospheric Shocks in Relativistic Explosions

This paper examines the mechanism of internal shocks in opaque relativistic outflows, in particular in cosmological gamma-ray bursts. The shocks produce neutrino emission and affect the observed photospheric radiation from the explosion. They develop from internal compressive waves and can be of different types depending on the composition of the outflow. (1) Shocks in “photon gas,” with negligible plasma inertia, have a unique structure determined by the force-free condition—zero radiation flux in the plasma rest frame. Radiation dominance over plasma inertia suppresses the formation of collisionless shocks mediated by collective electromagnetic fields. (2) If the outflow is sufficiently magnetized, a strong collisionless subshock develops, which is embedded in a thicker radiation-mediated structure. (3) Waves in outflows with a free neutron component lead to dissipation through nuclear collisions. At large optical depths, shocks have a thickness comparable to the neutron free path, with embedded radiation-mediated and collisionless subshocks. The paper also presents first-principles simulations of magnetized flows filled with photons, demonstrating the formation of shocks and their structure. Simple estimates show that magnetized sub-photospheric shocks are efficient producers of photons and have a great impact on the observed photospheric radiation. The shock structure changes as the outflow expands toward its photosphere. The dissipation is accompanied by strong e{sup ±} pair creation, and the e{sup ±}-dressed shock carries the photosphere with it up to two decades in radius, emitting a strong pulse of nonthermal radiation.

79 ASTRONOMY AND ASTROPHYSICS↗

Millimeter-wave dielectric tunability driven by topological polar structure switching in PbTiO 3 /SrTiO 3 superlattices

Dielectric tunability induced by an external electric field in materials underpins radio frequency signal modulation devices such as phase shifters, which are critical components in wireless communication and sensing systems. However, the tunability and integrability of current devices have yet to be enhanced for emerging applications, particularly at millimeter-wave frequencies. Here, we demonstrate that topological polar structures formed in PbTiO 3 /SrTiO 3 superlattices exhibit large tunable in-plane dielectric properties, as determined by their multiscale structural configurations and polarization switching behaviors. Under a moderate field of 30 kV cm −1 , the dipole wave structure maintains a tunability exceeding 15% at 70 GHz and above 8% over the measured range up to 110 GHz, contrasting with the weakly tunable flux closure structure. Based on in situ structural characterizations and molecular dynamics simulations, we delineate the polarization switching processes and elucidate the mechanisms underlying the observed tunable millimeter-wave dielectric responses. Our results provide new insights into the high-frequency dielectric properties of topological polar phases, potentially broadening the versatility of these materials in next-generation integrated electronic applications.

36 MATERIALS SCIENCE↗

Range of earth structure nonuniqueness implied by body wave observations.

The Herglotz-Wiechert integral for the direct inversion of ray parameter versus distance curves can be manipulated to find the envelope of all possible models consistent with geometrical body wave observations (travel time and ray parameter versus distance). Such an extremal inversion approach has been used to find the uncertainty bounds for the velocity structure in the mantle and core. It is found, for example, that there is an uncertainty of plus or minus 40 km in the radius of the inner core boundary, plus or minus 18 km at the core-mantle boundary, and plus or minus 35 km at the 435-km transition zone. The velocity uncertainty is about plus or minus 0.08 km/sec for P and S waves in the lower mantle and about plus or minus 0.20 km/sec in the core. Experiments with various combinations of ray types in the core indicate that rather crude observations of SKKS-SKS travel times confine the range of possible models far more dramatically than do the most precise estimates of PmKP travel times. Comparisons of results from extremal inversion and linearized perturbation inversions indicate that body wave behavior is too strongly nonlinear for linearized schemes to be effective for predicting uncertainty.

Wiggins, R. A.↗

SMALL-SCALE PRESSURE-BALANCED STRUCTURES DRIVEN BY MIRROR-MODE WAVES IN THE SOLAR WIND

Recently, small-scale pressure-balanced structures (PBSs) have been studied with regard to their dependence on the direction of the local mean magnetic field B{sub 0} . The present work continues these studies by investigating the compressive wave mode forming small PBSs, here for B{sub 0} quasi-perpendicular to the x-axis of Geocentric Solar Ecliptic coordinates (GSE-x). All the data used were measured by WIND in the quiet solar wind. From the distribution of PBSs on the plane determined by the temporal scale and angle θ{sub xB} between the GSE-x and B{sub 0} , we notice that at θ{sub xB} = 115° the PBSs appear at temporal scales ranging from 700 s to 60 s. In the corresponding temporal segment, the correlations between the plasma thermal pressure P{sub th} and the magnetic pressure P{sub B}, as well as that between the proton density N{sub p} and the magnetic field strength B, are investigated. In addition, we use the proton velocity distribution functions to calculate the proton temperatures T and T{sub ∥}. Minimum Variance Analysis is applied to find the magnetic field minimum variance vector B{sub N} . We also study the time variation of the cross-helicity σ{sub c} and the compressibility C{sub p} and compare these with values from numerical predictions for the mirror mode. In this way, we finally identify a short segment that has T > T{sub ∥}, proton β ≅ 1, both pairs of P{sub th}-P{sub B} and N{sub p}-B showing anti-correlation, and σ{sub c} ≈ 0 with C{sub p} > 0. Although the examination of σ{sub c} and C{sub p} is not conclusive, it provides helpful additional information for the wave mode identification. Additionally, B{sub N} is found to be highly oblique to B{sub 0} . Thus, this work suggests that a candidate mechanism for forming small-scale PBSs in the quiet solar wind is due to mirror-mode waves.

79 ASTRONOMY AND ASTROPHYSICS↗