Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Effects of strain-dependent surface stress on the adhesive contact of a rigid sphere to a compliant substrate

Recent experiments have reported that the surface stress of soft elastic solids can increase rapidly with surface strain. For example, when a small hard sphere in adhesive contact with a soft silicone gel is slowly retracted from its rest position, it was found that the retraction force versus displacement relation cannot be explained either by the Johnson–Kendall–Roberts (JKR) theory or a recent indentation theory based on an isotropic surface stress that is independent of surface strain. In this paper, we address this problem using a finite element method to simulate the retraction process. Our numerical model does not have the restrictions of the aforementioned theories; that is, it can handle large nonlinear elastic deformation as well as a surface-strain-dependent surface stress. Our simulation is in good agreement with experimental force versus displacement data with no fitting parameters. Therefore, our results lend further support to the claim that significant strain-dependent surface stresses can occur in simple soft elastic gels. However, significant challenges remain in the reconciliation of theory and experiments, particularly regarding the geometry of the contact and substrate deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mesoscopic analyses of the impact of morphology and operating conditions on the transport resistances in a proton-exchange-membrane fuel-cell catalyst layer

Exploring the origins of local transport resistance and characterizing the oxygen transport resistances in the catalyst layer (RCL) are critical for cost reduction. In this paper, a comprehensive mesoscopic model for simulating coupled transport processes of oxygen and water vapor for different structural parameters under different operating conditions in reconstructed microstructures is proposed. The local transport resistance is calculated after achieving the limiting current density and the effective diffusivity of oxygen. The results demonstrate that RCL increases greatly with decreasing platinum loading (LPt) and the transport resistances in other components of the cell dominate for high-loadings. Both the reduced oxygen permeation coefficient in the ionomer thin-film and the adsorption resistance account for the origins of local transport resistance. The local transport resistance increases with the bare carbon ratio for a constant LPt and Pt/C ratio due to the decreased effective ionomer surface, and increases with the I/C ratio due to the increased ionomer thickness and decreased Knudsen diffusivity. Due to the presence of liquid water, a slight decrease followed by an increase of the local transport resistance versus relative humidity is obtained. The contribution of ionomer thin-films to RCL is more sensitive to liquid saturation compared with that of pores. This journal is

Mu, YT↗
DOE OSTI2023

Titanium dioxide and table sugar enhance the leaching of silver out of nanosilver packaging

We manufactured laboratory-scale food packages containing 2.57 ± 0.18 × 10 –3 wt% silver nanoparticles (AgNPs) and used them to show that table sugar (sucrose) and microcrystalline titanium dioxide (μTiO 2 ) enhance Ag migration from these packages and into aqueous food simulants. Ag migration into purified water was detected but was below the limit of ICP-MS quantitation, giving a range of potential Ag migration between 0.059 and 0.082 ng cm –2 packaging surface area. Ag migration into 9 wt% aqueous sucrose solution was 0.547 ± 0.084 ng cm –2 and migration into 9 wt% sucrose solution containing 0.01 wt% μTiO 2 was 0.724 ± 0.032 ng cm –2 . Total Ag migration into a 0.01 wt% μTiO 2 aqueous dispersion without sucrose was between 0.122 and 0.162 ng cm –2 , with upper and lower limits defined by the detectability of Ag in the supernatant phase of the simulant. If the midpoint of this range is taken as a baseline, these results imply that, compared to purified water, Ag migration was increased by approximately 10.3 times when the water simulant contained μTiO 2 and sucrose at commercially-relevant concentrations. Notably, the Ag migrated into water containing both ingredients exceeded the total Ag migrated into either of the single-ingredient simulants, pointing to a potential cooperative relationship between sucrose and μTiO 2 that possibly derives from binding and redox interactions between these two ingredients. Sucrose and μTiO 2 also both reduced a portion of migrated Ag + back into AgNPs, and μTiO 2 particles efficiently captured (>25% by mass) migrated Ag on their surfaces. Similar effects on migration were observed with nanocrystalline TiO 2 . Furthermore, these experiments are the first to show that TiO 2 particles exert a strong influence on the quantity and form of Ag that could migrate from AgNP-enabled packaging, suggesting that food formulations and interactions between individual food components may be important to consider when evaluating the fate of nanoparticles in these consumer applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Survey of Surveys: I. The largest compilation of radial velocities for the Galaxy

In the present-day panorama of large spectroscopic surveys, the amount, diversity, and complexity of the available data continuously increase. The overarching goal of studying the formation and evolution of our Galaxy is hampered by the heterogeneity of instruments, selection functions, analysis methods, and measured quantities. Here, we present a comprehensive catalogue, the Survey of Surveys (SoS), built by homogeneously merging the radial velocity (RV) determinations of the largest ground-based spectroscopic surveys to date, such as APOGEE, GALAH, Gaia-ESO, RAVE, and LAMOST, using Gaia as a reference. This pilot study serves to prove the concept and to test the methodology that we plan to apply in the future to the stellar parameters and abundance ratios as well. We have devised a multi-staged procedure that includes: (i) the cross match between Gaia and the spectroscopic surveys using the official Gaia cross-match algorithm, (ii) the normalisation of uncertainties using repeated measurements or the three-cornered hat method, (iii) the cross calibration of the RVs as a function of the main parameters on which depend (magnitude, effective temperature, surface gravity, metallicity, and signal-to-noise ratio) to remove trends and zero point offsets, and (iv) the comparison with external high-resolution samples, such as the Gaia RV standards and the Geneva-Copenhagen survey, to validate the homogenisation procedure and to calibrate the RV zero-point of the SoS catalogue. We provide the largest homogenised RV catalogue to date, containing almost 11 million stars, of which about half come exclusively from Gaia and half in combination with the ground-based surveys. We estimate the accuracy of the RV zero-point to be about 0.16–0.31 km s –1 and the RV precision to be in the range 0.05–1.50 km s –1 depending on the type of star and on its survey provenance. We validate the SoS RVs with open clusters from a high resolution homogeneous samples and provide the systemic velocity of 55 individual open clusters. Additionally, we provide median RVs for 532 clusters recently discovered by Gaia data. The SoS is publicly available and ready to be applied to various research projects, such as the study of star clusters, Galactic archaeology, stellar streams, or the characterisation of planet-hosting stars, to name a few. We also plan to include survey updates and more data sources in future versions of the SoS.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Effect of bath temperature on surface morphology and photocatalytic activity of ZnO nanorods

ZnO nanorods were prepared by using simple hydrothermal method using four different bath temperatures. All the prepared ZnO nanorods are annealed at 450°C and are characterized by using various techniques such as X-ray diffraction, UV spectra and scanning electron microscopy. Photocatalytic activity of the prepared ZnO nanorods is analyzed. A novel photocatalytic reactor designed with ZnO nanorods prepared at 90°C shows enhanced catalytic efficiency. The role of light irradiation time, bath temperature and surface morphology of the ZnO nanorods on the performance of photocatalytic reaction is analyzed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Spin waves in the soft layer of exchange-coupled soft/hard bilayers

The magnetic dynamical properties of the soft layer in exchange-coupled soft/hard bilayers have been investigated numerically using a one-dimensional atomic chain model. The frequencies and spatial profiles of spin wave eigenmodes are calculated during the magnetization reversal process of the soft layer. The spin wave modes exhibit a spatially modulated amplitude, which is especially evident for high-order modes. A dynamic pinning effect of surface magnetic moment is observed. The spin wave eigenfrequency decreases linearly with the increase of the magnetic field in the uniformly magnetized state and increases nonlinearly with field when spiral magnetization configuration is formed in the soft layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Energy level alignment at molecule-metal interfaces from an optimally tuned range-separated hybrid functional

The alignment of the frontier orbital energies of an adsorbed molecule with the substrate Fermi level at metal-organic interfaces is a fundamental observable of significant practical importance in nanoscience and beyond. Typical density functional theory calculations, especially those using local and semi-local functionals, often underestimate level alignment leading to inaccurate electronic structure and charge transport properties. Here, we develop a new fully self-consistent predictive scheme to accurately compute level alignment at certain classes of complex heterogeneous molecule-metal interfaces based on optimally tuned range-separated hybrid functionals. Starting from a highly accurate description of the gas-phase electronic structure, our method by construction captures important nonlocal surface polarization effects via tuning of the long-range screened exchange in a range-separated hybrid in a non-empirical and system-specific manner. We implement this functional in a plane-wave code and apply it to several physisorbed and chemisorbed molecule-metal interface systems. Our results are in quantitative agreement with experiments, the both the level alignment and work function changes. This approach constitutes a new practical scheme for accurate and efficient calculations of the electronic structure of molecule-metal interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Polarization-dependent local conductivity and activation energy in KTiOPO 4

We study the local conductivity properties of KTiOPO4 using conductive atomic force microscopy in ultrahigh vacuum (UHV). We show that domains with opposite orientations have different conductivity values. We research the temperature dependence of the local conductivity and report a difference in the activation energy of 25% between different domains. Moreover, we show that the local conductivity increases with the number of biased-scans. Lastly, it is found that the domain wall conductivity previously observed at ambient conditions vanishes in UHV. Our results are discussed in terms of the screening effects and surface conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Electron mobility enhancement in an undoped Si/SiGe heterostructure by remote carrier screening

Here, we investigate the effects of surface tunneling on electrostatics and transport properties of two-dimensional electron gases (2DEGs) in undoped Si/SiGe heterostructures with different 2DEG depths. By varying the gate voltage, four stages of density-mobility dependence are identified with two density saturation regimes observed, which confirms that the system transitions between equilibrium and nonequilibrium. Mobility is enhanced with an increasing density at low biases and, counterintuitively, with a decreasing density at high biases as well. The density saturation and mobility enhancement can be semiquantitatively explained by a surface tunneling model in combination with a bilayer screening theory

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Effects of cation stoichiometry on surface morphology and crystallinity of ZnGeN 2 films grown on GaN by metalorganic chemical vapor deposition

ZnGeN 2 films were grown on GaN-on-sapphire templates via metalorganic chemical vapor deposition. Energy dispersive X-ray spectroscopy was used to estimate the Zn/(Zn+Ge) composition ratio in the films. This ratio decreased with increase in growth temperature but increased with increase in total reactor pressure or Zn/Ge precursor flow rate ratio. Systematic mapping of these key growth parameters has allowed us to identify the growth window to achieve ZnGeN 2 with stoichiometric cation composition. Compositional and statistical analyses performed on data acquired from atom probe tomography provided insight into the local compositional homogeneity. The cations Zn and Ge did not demonstrate segregation or clustering at the sub-nanometer level. Based on X-ray diffraction 2θ-ω scan profiles and transmission electron microscope nano-diffraction patterns, the films with near-stoichiometric cation ratios were single crystalline with planar surfaces, whereas zinc-rich or zinc-poor films were polycrystalline with nonplanar surfaces. The growth direction of the single crystalline ZnGeN 2 films on GaN templates was along the c-axis. Room temperature Raman spectra showed features associated with the phonon density of states, indicating the presence of cation disorder in the lattice. A cathodoluminescence peak associated with transitions involving deep level defects was observed around 640 nm. The intensity of this peak increased by almost 2.5 times as the temperature was reduced to 77 K from room temperature. A similar peak was observed in photoluminescence spectra collected at 80 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Absolute laser energy absorption measurement of relativistic 0.7 ps laser pulses in nanowire arrays

Laser absorption is one of the most important parameters governing laser–matter interactions. The laser energy absorption on nanowire array targets is measured for the first time in the relativistic regime at intensities of 10 19 W=cm 2 and compared to foil targets. The results show that the laser energy absorption of 0.7 ps frequency doubled (527 nm) pulses on Au nanowire targets varies widely with nanowire parameters, reaching laser energy absorption values up to 71% of the incident energy, significantly exceeding those of solid flat targets obtained in similar irradiation conditions. The analysis shows that the increase in absorption strongly correlates with larger effective target surface area over a broad range of nanowire parameters explored. These direct absorption measurements provide valuable data to benchmark simulations of the relativistic laser pulse interactions with nanostructures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Demonstration of thermal limit mean transverse energy from cesium antimonide photocathodes

The mean transverse energy (MTE) of electrons emitted from cathodes is a critical parameter that determines the brightness of electron beams for applications, such as x-ray free electron lasers, particle colliders, and ultrafast electron scattering experiments. Achieving a MTE close to the thermal limit is a key step toward realizing the full potential of electron sources in these applications. Cesium antimonide (Cs 3 Sb) is a technologically important material with a long history of use in photon detection and electron sources. The smallest MTE of electrons photoemitted from Cs 3 Sb has always been appreciably greater than the thermal limit and was attributed to surface non-uniformities. In this work, we present comprehensive measurements of the photoemission electron energy spectra (PEES), quantum efficiency, and MTE from Cs 3 Sb in a wide photoexcitation energy range from 1.5 to 2.3 eV. Our PEES measurements demonstrate a notably low photoemission threshold of around 1.5 eV, which is in contrast with the previously perceived threshold of 1.8–2.0 eV. Moreover, we show that the MTE at this threshold of 1.5 eV nearly converges to the thermal limit at 300 K. At 1.8 eV, the MTE measured is 40 meV, which is comparable to the previously reported value. Here, we conclude that this MTE value at 1.8 eV photon energy is not due to surface roughness effects as previously believed, but is a direct consequence of the excess energy.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Probing elemental diffusion and radiation tolerance of perovskite solar cells via non-destructive Rutherford backscattering spectrometry

Mixed organic–inorganic halide perovskite-based solar cells have attracted interest in recent years due to their potential for both terrestrial and space applications. Analysis of interfaces is critical to predicting device behavior and optimizing device architectures. Most advanced tools to study buried interfaces are destructive in nature and can induce further degradation. Ion beam techniques, such as Rutherford backscattering spectrometry (RBS), is a useful non-destructive method to probe an elemental depth profile of multilayered perovskite solar cells (PSCs) as well as to study the inter-diffusion of various elemental species across interfaces. Additionally, PSCs are becoming viable candidates for space photovoltaic applications, and it is critical to investigate their radiation-induced degradation. RBS can be simultaneously utilized to analyze the radiation effects induced by He+ beam on the device, given their presence in space orbits. In the present work, a 2 MeV He+ beam was used to probe the evidence of elemental diffusion across PSC interfaces with architecture glass/ITO/SnO2/Cs0.05(MA0.17FA0.83)0.95Pb(I0.83Br0.17)3/spiro-OMeTAD/MoO3/Au. During the analysis, the device active area was exposed to an irradiation equivalent of up to 1.62 × 1015 He+/cm2, and yet, no measurable evidence (with a depth resolution ∼1 nm) of beam-induced ion migration was observed, implying high radiation tolerance of PSCs. On the other hand, aged PSCs exhibited indications of the movement of diverse elemental species, such as Au, Pb, In, Sn, Br, and I, in the active area of the device, which was quantified with the help of RBS.

14 SOLAR ENERGY↗
DOE OSTI2026

Separation of Hydrogen Using Pd/Ag Membranes: Experimental and Modeling Results with Potential Application to Direct Internal Recycle

Implementation of fusion energy requires processing the deuterium-tritium (D-T) mixture used to fuel the reaction, and separation of hydrogen isotopes from other gases is imperative. Specifically, the separation of hydrogen isotopes from helium is a matter of importance to the fusion fuel cycle community. Initial testing with a palladium-silver (Pd-Ag) membrane indicates that even moderate vacuum (~100 torr permeate pressure) can provide a high degree of separation (>90%) at a high ratio of H 2 to He. Given the presence of He in many fusion systems, a high technology readiness level (TRL) for Q 2 /He (where Q represents any isotope of hydrogen) separations is needed. This study demonstrates the efficacy of H 2 removal from He via permeation and potential applications for direct internal recycle. Modeling will accompany the experimental campaign to generate a predictive capability and quantify the separation performance. Modeling from previous hydrogen permeation studies has demonstrated that the typical Sieverts’ law fails to predict the measured permeation rates at high hydrogen fluxes. Existing models are being refined to integrate the effects of surface phenomena into permeation predictions, which have been expanded to account for mixtures with large ranges of Q 2 concentrations. These data will improve the TRL of permeators as a separation technology for the fusion fuel cycle.

08 HYDROGEN↗
DOE OSTI2018

An atomic-scale evaluation of the fracture toughness of silica glass

Using an atomistic technique consistent with continuum balance laws and drawing on classical fracture mechanics theory, we estimate the resistance to fracture propagation of amorphous silica. Here, we discuss correspondence and deviations from classical linear elastic fracture mechanics theory including size dependence, rigid/floppy modes of deformation, and the effects of surface energy and stress.

36 MATERIALS SCIENCE↗
DOE OSTI2019

A buffer-free concept bubble chamber for PICO dark matter searches

Here, we report on the successful operation at Drexel University of the PICO collaboration's first C 3 F 8 buffer-free prototype fluorocarbon bubble chamber. Previous PICO bubble chambers have produced world-leading WIMP search results with fluorocarbon target fluids, separated from the steel bellows by a buffer layer of water. Surface tension effects at the jar walls and liquid-liquid interface lead to a class of background events which have nuclear-recoil-like acoustic signatures and thus contaminate the WIMP-like signal region in analysis. Thus new bubble chambers are to be constructed “right-side-up”, meaning that the jar of C 3 F 8 is above the bellows with no water inside the inner vessel. The Drexel Bubble Chamber (DBC), runs successfully at and below the nuclear recoil thresholds used by PICO for WIMP searches, including thresholds as low as 1.19 keV . We have demonstrated sensitivity to 137 Cs gammas and spontaneous fission neutrons from 244 Cm, and acoustic alpha discrimination is demonstrated to be possible although the observed rate of alpha decays is very low. Position reconstruction from stereoscopic imaging allows for basic analysis cuts for calibration data. The successful construction and operation of this prototype confirm the effectiveness of the right-side-up design, which will be used in future dark matter searches such as PICO-40L and PICO-500.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗