Search NASA⌕ Search

SEARCH · Search NASA

Results for “zirconates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Phase transformations induced by high electronic excitation in ion-irradiated Gd{sub 2}(Zr{sub x}Ti{sub 1-x}){sub 2}O{sub 7} pyrochlores

The pyrochlore oxides (A{sub 2}B{sub 2}O{sub 7}) exhibit a remarkable range of structural, physical, and magnetic properties related to their various chemical compositions. This article reports the phase transformations induced by high electronic excitation in pyrochlores of the Gd{sub 2}(Zr{sub x}Ti{sub 1-x}){sub 2}O{sub 7} family irradiated with swift ions. The structural changes, investigated by using several analytical techniques (x-ray diffraction, Raman spectroscopy, and transmission electron microscopy), strongly depend on the chemical composition. The high electronic excitation along the ion trajectory results in the amorphization of ion tracks for Gd{sub 2}Ti{sub 2}O{sub 7} and Gd{sub 2}TiZrO{sub 7}, whereas a defective fluorite structure is formed in Gd{sub 2}Zr{sub 2}O{sub 7}. Moreover, the results underline the existence of an electronic stopping power threshold of 6 keV/nm for amorphizable compounds and 10 keV/nm for Gd{sub 2}Zr{sub 2}O{sub 7}, below which phase transformations do not occur. Finally, the study of the thermal recovery of irradiated pyrochlores provides the recrystallization temperature for amorphized samples and reveals differences in the recovery process which are related to the chemical composition.

36 MATERIALS SCIENCE↗

Anomaly in the conductivity relaxation parameters at the phase transition of ferroelectric materials: A time domain study

The influence of the ferroelectric to paraelectric transition on the relaxation parameters of conductive processes in ferroelectric materials is studied in the time domain. Three well-known ferroelectric systems were chosen with transition temperatures in different regions, these are, high-temperature PbNb{sub 2}O{sub 6}-based ceramics; nanostructured Pb(Zr{sub 0.6}Ti{sub 0.4})O{sub 3} ceramics; and submicron BaTiO{sub 3}. The thermal evolution of relaxation parameters shows clear anomalies in their typical behavior when conductivity processes arise in the temperature range where the ferroelectric transition takes place. The method here described allows obtaining information about the correlation between charge transport and the motion of the off-center ions at the phase transition.

36 MATERIALS SCIENCE↗

Large magnetoelectric effect in mechanically mediated structure of TbFe{sub 2}, Pb(Zr,Ti)O{sub 3}, and nonmagnetic flakes

Magnetoelectric (ME) effect has been studied in a structure of a magnetostrictive TbFe{sub 2} alloy, two piezoelectric Pb(Zr,Ti)O{sub 3} (PZT) ceramics, and two nonmagnetic flakes. The ME coupling originates from the magnetic-mechanical-electric transform of the magnetostrictive effect in TbFe{sub 2} and the piezoelectric effect in PZT by end bonding, instead of interface bonding. Large ME coefficients of 10.5 and 9.9 V cm{sup -1} Oe{sup -1} were obtained at the first planar acoustic and third bending resonance frequencies, which are larger than that of conventional layered TbFe{sub 2}/PZT composites. The results show that the large ME coupling can be achieved without interface coupling.

36 MATERIALS SCIENCE↗

Soft and hybrid-doped Pb(Zr,Ti)O{sub 3} ceramics under stress, electric field, and temperature loading

We investigated the influence of uniaxial pressure (0-1000 bars) applied parallelly or perpendicularly to the ac or dc electric field (in a one-dimensional or two-dimensional manner) on dielectric and ferroelectric properties of selected soft and hybrid-doped PZT ceramics (1 mol. % Gd, 1 mol. % La and 1 mol. % (La+Fe)-doped Pb(Zr{sub 0.54}Ti{sub 0.46}) O{sub 3}). Applying uniaxial pressure leads to a reduction of the peak intensity of the electric permittivity ({epsilon}), of the frequency dispersion, and of the dielectric hysteresis. The peak intensity of {epsilon} becomes diffused and shifts to a higher temperatures with increasing pressure. Simultaneous application of uniaxial pressure and dc electric field (perpendicular to each other) in the poling process implies in improvement of the ferroelectric properties, indicating a new possibility for poling materials with a high coercive field and/or high electric conductivity. It was also found that simultaneous application of uniaxial pressure and dc electric field (perpendicular to each other) allowed observation of the space charge in the depolarization process. The electrostrictive coefficient Q{sub 11} and differential permittivity were evaluated from obtained data. Our results show that applying uniaxial pressure induces similar effects as increasing the Ti-ion concentration in the PZT system. We interpreted our results based on the Cochran soft-mode and domain switching processes under the action of pressure.

36 MATERIALS SCIENCE↗

Effect of PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} thin layer on structure, electronic and magnetic properties of La{sub 0.65}Sr{sub 0.35} MnO{sub 3} and La{sub 0.65}Ca{sub 0.30}MnO{sub 3} thin-films

Epitaxial thin film heterostructures of high dielectric PbZr{sub 1-x}Ti{sub x}O{sub 3} (PZT) and La{sub 1-x}A{sub x}MnO{sub 3} (A-divalent alkaline earth metals such as Sr (LSMO) and Ca (LCMO)) were grown on SrTiO{sub 3} substrates and their structure, temperature dependence of electrical resistivity, and magnetization were investigated as a function of the thickness of the LSMO(LCMO) layer. The microstructures of the samples were analyzed by TEM. By applying an electric field across the PZT layer, we applied a ferrodistortive pressure on the manganite layer and studied the correlations between lattice distortion and electric transport and magnetic properties of the CMR materials.

36 MATERIALS SCIENCE↗

Dielectric, Electrical and Magnetic Properties of PbZr{sub 0.53}Ti{sub 0.47} O{sub 3}-Ni{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4} Multiferroic Composite

Novel ferroelectric/ferrimagnetic multiferroic composite of PbZr{sub 0.53}Ti{sub 0.47}O{sub 3}(PZT)-Ni{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4}(NZFO)(80:20 wt%) were fabricated by a conventional solid-state reaction technique. Structural analysis carried out by X ray diffraction technique, reveals the presence of both PZT and NZFO binary phase in this composite. Detailed analysis of dielectric and ferroelectric properties in a wide temperature range (30-400 deg. C) showed a ferro to paraelectric phase transition at 293 deg. C. The electrical properties of the composite samples were investigated in a frequency range of 100 Hz-1 MHz using complex impedance spectroscopic technique. Complex impedance analysis showed the presence of grains and grain boundaries contribution for electrical conduction in this composite. Temperature dependent magnetic hysteresis (M-H) loops in the temperature range of 80-300 K show excellent non-saturating ferrimagnetic behavior with coercive field (Hc) in the range of 60-45 Oe in this multiferroic PZT/NZFO composite.

36 MATERIALS SCIENCE↗

Abnormal electronic transition variations of lanthanum-modified lead zironate stannate titanate ceramics near morphotropic phase boundary: A spectroscopic evidence

The structure-related optical response of (Pb{sub 1-1.5x}La{sub x})(Zr{sub 0.42}Sn{sub 0.40}Ti{sub 0.18})O{sub 3} (100x/42/40/18) ceramics with different compositions has been investigated. Based on x-ray diffraction, the phase transition from rhombohedral to tetragonal structure is revealed between compositions of x = 2.6% and 2.8% near morphotropic phase boundary (MPB). Correspondingly, abnormal spectral response in the photon energy from 1.4 to 6.1 eV is observed near MPB. Furthermore, the blue shift of the two critical points related parameters, which is obtained from fitting the reflectance spectra, indicates that the variation of electronic band structure near MPB is responsible for the anomalous behavior.

36 MATERIALS SCIENCE↗

Evidence of Eu{sup 2+} 4f electrons in the valence band spectra of EuTiO{sub 3} and EuZrO{sub 3}

We report on optical band gap and valence electronic structure of two Eu{sup 2+}-based perovskites, EuTiO{sub 3} and EuZrO{sub 3} as revealed by diffuse optical scattering, electron energy loss spectroscopy, and valence-band x-ray photoelectron spectroscopy. The data show good agreement with the first-principles studies in which the top of the valence band structure is formed by the narrow Eu 4f{sup 7} electron band. The O 2p band shows the features similar to those of the Ba(Sr)TiO{sub 3} perovskites except that it is shifted to higher binding energies. Appearance of the Eu{sup 2+} 4f{sup 7} band is a reason for narrowing of the optical band gap in the title compounds as compared to their Sr-based analogues.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electric field induced metastable ferroelectric phase and its behavior in (Pb, La)(Zr, Sn, Ti)O{sub 3} antiferroelectric single crystal near morphotropic phase boundary

Antiferroelectric (AFE) (Pb, La)(Zr, Sn, Ti)O{sub 3} (PLZST) single crystal with composition near morphotropic phase boundary has been grown and studied. X-ray diffraction analysis and electrical properties reveal coexistence of antiferroelectric/ferroelectric (FE) phases, with the AFE phase dominated at room temperature. Temperature-dependent polarization and strain measurements indicate that the AFE phase can be induced into a metastable FE phase by electric field. The FE phase can be maintained in a wide temperature range above room temperature and recovers to AFE phase around a critical temperature of 90 °C, accompanied with remarkable change in field-induced strain. The strain at 90 °C (∼0.50%) is ten times larger than that at room temperature (∼0.04%), which makes the PLZST single crystal a promising candidate for thermal switch and actuator application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel ferroelectric single crystals of Bi(Zn{sub 1/2}Ti{sub 1/2})O{sub 3}-PbZrO{sub 3}-PbTiO{sub 3} ternary solid solution

Ferroelectric single crystals of a new lead-reduced Bi(Zn{sub 1/2}Ti{sub 1/2})O{sub 3}-PbZrO{sub 3}-PbTiO{sub 3} (BZT-PZ-PT) ternary solid solution system have been grown for the first time by three different methods, namely high temperature solution growth (HTSG, or flux method), top-cooled solution growth (TCSG), and top-seeded solution growth (TSSG). The chemical and thermodynamic parameters, including the flux concentration, the soaking temperature and the cooling rate, have been optimized, leading to the growth of good quality BZT-PZ-PT crystals of pseudo-cubic morphology. A large size crystal of the dimensions of 2 × 2 × 0.5 cm{sup 3} has been obtained by the TSSG technique. The crystal structure is analyzed by means of X-ray powder diffraction. The highest ferroelectric Curie temperature T{sub C} of the grown crystals is found to be 320 °C by means of dielectric measurements. A remnant polarization of 32 μC/cm{sup 2} is displayed with a coercive field of 15.4 kV/cm. The high T{sub C} and large coercive field of the BZT-PZ-PT single crystal make this material a promising candidate for applications in high power electromechanical transducers that can operate in a wider temperature range and at high fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural phase transition of BaZrO{sub 3} under high pressure

We studied the phase transition behavior of cubic BaZrO{sub 3} perovskite by in situ high pressure synchrotron X-ray diffraction experiments up to 46.4 GPa at room temperature. The phase transition from cubic phase to tetragonal phase was observed in BaZrO{sub 3} for the first time, which takes place at 17.2 GPa. A bulk modulus 189 (26) GPa for cubic BaZrO{sub 3} is derived from the pressure–volume data. Upon decompression, the high pressure phase transforms into the initial cubic phase. It is suggested that the unstable phonon mode caused by the rotation of oxygen octahedra plays a crucial role in the high pressure phase transition behavior of BaZrO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Continuous cross-over from ferroelectric to relaxor state and piezoelectric properties of BaTiO{sub 3}-BaZrO{sub 3}-CaTiO{sub 3} single crystals

Optimal properties like piezoelectricity can be found in polarizable materials for which the structure changes sharply under small composition variations in the vicinity of their morphotropic phase boundary or the triple point in their isobaric temperature-composition phase diagram. In the latter, lead-free (Ba{sub 0.850}Ca{sub 0.150})(Ti{sub 0.900}Zr{sub 0.100})O{sub 3} ceramics exhibit outstanding piezoelectric coefficients. For the first time, we report the growth of piezoelectric lead-free single crystals in the BaTiO{sub 3}-BaZrO{sub 3}-CaTiO{sub 3} pseudo-ternary system. The stoichiometry control in the CaO-BaO-TiO{sub 2}-ZrO{sub 2} solid solution led to single crystals with various compositions ranging from (Ba{sub 0.857}Ca{sub 0.143})(Ti{sub 0.928}Zr{sub 0.072})O{sub 3} to (Ba{sub 0.953}Ca{sub 0.047})(Ti{sub 0.427}Zr{sub 0.573})O{sub 3}. We evidenced a continuous cross-over from a ferroelectric state at high titanium content to a relaxor one on increasing the zirconium content. Such a property tuning is rather seldom observed in lead-free ferroelectrics and confirms what was already reported for ceramics. Single crystal with (Ba{sub 0.838}Ca{sub 0.162})(Ti{sub 0.854}Zr{sub 0.146})O{sub 3} composition, which has been grown and oriented along [001] crystallographic direction, displayed electromechanical coefficients d{sub 31} and k{sub 31} of 93 pC.N{sup −1} and 0.18, respectively, near the room temperature (T = 305 K)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain tunable ferroelectric and dielectric properties of BaZrO{sub 3}

The crucial role of epitaxial (in-plane) strain on the structural, electronic, energetic, ferroelectric, and dielectric properties of BaZrO{sub 3} (BZO) is investigated using density-functional theory calculations. We demonstrate that the BZO crystal subjected to a critical compressive (or tensile) strain exhibits non-trivial spontaneous polarization that is higher than that of well-known ferroelectrics BaTiO{sub 3}, while the BZO crystal is essentially paraelectric in the absence of strain. The electronic structure and Born-effective-charge analyses elucidate that the strain-induced paraelectric-to-ferroelectric transition is driven by the orbital hybridization of d-p electrons between zirconium and oxygen. Through the strain-induced paraelectric-to-ferroelectric phase transition, the dielectric response of BZO is significantly enhanced by the in-plane strain. The tensile strain increases the in-plane dielectric constant by a factor of seven with respect to that without the strain, while the compression tends to enhance the out-of-plane dielectric response. Therefore, strain engineering makes BZO an important electromechanical material due to the diversity in ferroelectric and dielectric properties.

36 MATERIALS SCIENCE↗

The structural and in-plane dielectric/ferroelectric properties of the epitaxial (Ba, Sr)(Zr, Ti)O{sub 3} thin films

Epitaxial (Ba{sub 1-x}Sr{sub x})(Zr{sub 0.1}Ti{sub 0.9})O{sub 3} (BSZT, x = 0 – 0.45) thin films were deposited on (LaAlO{sub 3}){sub 0.3}(Sr{sub 2}AlTaO{sub 6}){sub 0.35} (LSAT) substrates by pulsed laser deposition. The experimental results demonstrate that the structural, dielectric, and ferroelectric properties of the BSZT thin films were greatly dependent on the strontium content. The BSZT thin films transformed from tetragonal to cubic phase when x ≥ 0.35 at room temperature. The Curie temperature and room-temperature remnant polarization decrease with increasing strontium concentration. The optimal dielectric properties were found in (Ba{sub 0.55}Sr{sub 0.45})(Zr{sub 0.1}Ti{sub 0.9})O{sub 3} thin films which is in paraelectric state, having tunability of 47% and loss tangent of 0.0338 under an electric field of 20 MV/m at 1 MHz. This suggests that BSZT thin film is a promising candidate for tunable microwave device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Softening of antiferroelectricity in PbZrO{sub 3}-Pb(Mn{sub 1/2}W{sub 1/2})O{sub 3} complex perovskite solid solution

A new solid solution of complex perovksite structure, (1-x)PbZrO{sub 3}-xPb(Mn{sub 1/2}W{sub 1/2})O{sub 3} (PZ-xPMnW, with x = 0–0.1), is prepared by solid state reaction method. Its crystal structure, dielectric properties, and antiferroelectricity are investigated. It is found that the crystal structure of the solid solution remains in the orthorhombic Pbam symmetry with x ≤ 0.1. The induced ferroelectric polarization (P{sub Ind}) is enhanced, whereas the critical field (E{sub Cr}) is decreased, with increasing PMnW concentration, indicating the softening of antiferroelectricity in PZ. The Curie temperature (T{sub C}) is also decreased with the substitution of PMnW for PZ. The grain size is significantly enlarged, which could be attributed to the presence of a transient liquid phase during the sintering process. Measurements of the magnetization by means of SQUID confirm that the Mn ion exists in a high spin state with a 2+ oxidation state. The softening of antiferroelectric order and the improvement in induced polarization make the PZ-PMnW ceramics an interesting material system for such applications as energy storage devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly constrained ferroelectric [BaTiO{sub 3}]{sub (1−x)Λ}/[BaZrO{sub 3}]{sub xΛ} superlattices: X-ray diffraction and Raman spectroscopy

We report an x-ray diffraction (XRD) and a Raman-scattering investigation of ferroelectric/paraelectric superlattices [BaTiO{sub 3}] {sub (1−x)Λ}/[BaZrO{sub 3}]{sub xΛ} for which the composition varied, 0.15 ≤ x ≤ 0.85, while the superlattice (SL) modulation period Λ was kept constant at about 100 Å. The samples were epitaxially grown by pulsed laser deposition on MgO substrates buffered with La{sub 0.5}Sr{sub 0.5}CoO{sub 3}. Based on the XRD analysis and on polarized Raman spectra, we have showed that the large strain in SLs induced ferroelectricity in BaZrO{sub 3} (BZ) for all SLs, a material that is paraelectric in the bulk form at any temperature and in the single film. The induced polar axis in BZ layers is perpendicular to the plane of substrate while BaTiO{sub 3} (BT) layers exhibit in-plane polar orientation. Raman spectroscopy revealed a lattice ordering in SLs due to the misfit strain generated by the large lattice mismatch between the alternating BZ and BT layers. This strain induced a huge upward frequency of the lowest E(1TO) soft mode from 60 cm{sup −1} in the BT single film to 215 cm{sup −1} in the SL with x = 0.85. These results show that in spite of relatively large periodicity of SLs, they are highly constrained and the variation of BZ ratio allowed modifying strains between layers. The temperature dependence of the Raman spectra for BT{sub 0.3Λ}/BZ{sub 0.7Λ} and BT{sub 0.7Λ}/BZ{sub 0.3Λ} samples revealed giant shift of the ferroelectric phase transition. The phase transition temperature was found to be upshifted by about 300 °C with respect to BT single crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferroelectric-ferromagnetic multilayers: A magnetoelectric heterostructure with high output charge signal

Multiferroic composites and heterostructures comprising ferroelectric and ferromagnetic materials exhibit room-temperature magnetoelectric (ME) effects greatly exceeding those of single-phase magnetoelectrics known to date. Since these effects are mediated by the interfacial coupling between ferroic constituents, the ME responses may be enhanced by increasing the density of interfaces and improving their quality. A promising material system providing these features is a ferroelectric-ferromagnetic multilayer with epitaxial interfaces. In this paper, we describe theoretically the strain-mediated direct ME effect exhibited by free-standing multilayers composed of single-crystalline ferroelectric nanolayers interleaved by conducting ferromagnetic slabs. Using a nonlinear thermodynamic approach allowing for specific mechanical boundary conditions of the problem, we first calculate the polarization states and dielectric properties of ferroelectric nanolayers in dependence on the lattice mismatch between ferroic constituents and their volume fractions. In these calculations, the ferromagnetic component is described by a model which combines linear elastic behavior with magnetic-field-dependent lattice parameters. Then the quasistatic ME polarization and voltage coefficients are evaluated using the theoretical strain sensitivity of ferroelectric polarization and measured effective piezomagnetic coefficients of ferromagnets. For Pb(Zr₀.₅Ti₀.₅)O₃-FeGaB and BaTiO₃-FeGaB multilayers, the ME coefficients are calculated numerically as a function of the FeGaB volume fraction and used to evaluate the output charge and voltage signals. It is shown that the multilayer geometry of a ferroelectric-ferromagnetic nanocomposite opens the way for a drastic enhancement of the output charge signal. This feature makes biferroic multilayers advantageous for the development of ultrasensitive magnetic-field sensors for technical and biomedical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

KNN–NTK composite lead-free piezoelectric ceramic

A (K,Na)NbO₃-based lead-free piezoelectric ceramic was successfully densified. It exhibited an enhanced electromechanical coupling factor of kₚ=0.52, a piezoelectric constant d₃₃=252 pC/N, and a frequency constant Nₚ=3170 Hz m because of the incorporation of an elaborate secondary phase composed primarily of KTiNbO₅. The ceramic's nominal composition was 0.92K₀.₄₂Na₀.₄₄Ca₀.₀₄Li₀.₀₂Nb₀.₈₅O₃–0.047K₀.₈₅Ti₀.₈₅Nb₁.₁₅O₅–0.023BaZrO₃ –0.0017Co₃O₄–0.002Fe₂O₃–0.005ZnO, abbreviated herein as KNN–NTK composite. The KNN–NTK ceramic exhibited a dense microstructure with few microvoids which significantly degraded its piezoelectric properties. Elemental maps recorded using transmission electron microscopy with energy-dispersive X-ray spectroscopy (TEM–EDS) revealed regions of high concentrations of Co and Zn inside the NTK phase. In addition, X-ray diffraction patterns confirmed that a small portion of the NTK phase was converted into K₂(Ti,Nb,Co,Zn)₆O₁₃ or CoZnTiO₄ by a possible reaction between Co and Zn solutes and the NTK phase during a programmed sintering schedule. TEM studies also clarified a distortion around the KNN/NTK interfaces. Such an NTK phase filled voids between KNN particles, resulting in an improved chemical stability of the KNN ceramic. The manufacturing process was subsequently scaled to 100 kg per batch for granulated ceramic powder using a spray-drying technique. The properties of the KNN–NTK composite ceramic produced using the scaled-up method were confirmed to be identical to those of the ceramic prepared by conventional solid-state reaction sintering. Consequently, slight changes in the NTK phase composition and the distortion around the KNN/NTK interfaces affected the KNN–NTK composite ceramic's piezoelectric characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗