Search NASA⌕ Search

SEARCH · Search NASA

Results for “AUTOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Metallic magnetism and change of conductivity in the nano to bulk transition of cobalt ferrite

Variations in conductivity with particle size have been observed in cobalt ferrite, when synthesized by solgel auto-combustion method. Impedance analysis reveals metallic and semiconducting behavior at room temperature for a particle size of 6 nm and 52 nm, respectively. Upon thermal activation, metallic to semiconducting phase transition has been observed as a function of particle size and vice-versa. Grainboundary Resistance (R{sub gb}), increased drastically with particle size (19 MΩ for 6 nm and 259 MΩ for 52 nm) at room temperature. AC conductivity and dielectric constants exhibit similar metallic to semiconducting phase transition at 6 nm and semiconducting behavior at 52 nm with temperature in the selected frequencies. Enhanced magnetic moment with an increase in the grain size along with decreased coercivity (1444 G to 1146 G) reveals transition from single domain to multi-domain. Increased inter-particle interaction is responsible for metallicity at the nano level and on the contrary semiconductivity is attributed to bulk.

36 MATERIALS SCIENCE↗

Computational analysis of kidney scintigrams

The scintigraphic investigation of normal and pathological kidneys was carried out using specialized gamma-camera device from nuclear medicine hospital department. Technetium 90m isotope with gamma radiation emission, coupled with vector molecules for kidney tissues was introduced into the subject body, its dynamics being recorded as data source for kidney clearance capacity. Two representative data series were investigated, corresponding to healthy and pathological organs respectively. The semi-quantitative tests applied for the comparison of the two distinct medical situations were: the shape of probability distribution histogram, the power spectrum, the auto-correlation function and the Lyapunov exponent. While power spectrum led to similar results in both cases, significant differences were revealed by means of distribution probability, Lyapunov exponent and correlation time, recommending these numerical tests as possible complementary tools in clinical diagnosis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Tunable magnetic and magnetocaloric properties of La{sub 0.6}Sr{sub 0.4}MnO{sub 3} nanoparticles

Nanoparticles of La{sub 0.6}Sr{sub 0.4}MnO{sub 3} with different particle sizes are synthesized by the nitrate-complex auto-ignition method. The structural and magnetic properties of the samples are investigated by X-Ray diffraction (XRD), Fourier transform infra-red (FT-IR) spectroscopy, transmission electron microscopy (TEM), and DC magnetization measurements. The XRD study coupled with the Rietveld refinement shows that all samples crystallize in a rhombohedral structure with the space group of R-3 C. The FT-IR spectroscopy and TEM images indicate formation of the perovskite structure with the average sizes of 20, 40, and 100 nm for the samples sintered at 700, 800, and 1100 °C, respectively. The DC magnetization measurements confirm tuning of the magnetic properties due to the particle size effects, e.g., reduction in the ferromagnetic moment and increase in the surface spin disorder by decreasing the particle size. The magnetocaloric effect (MCE) study based on isothermal magnetization vs. filed measurements in all samples reveals a relatively large MCE around the Curie temperature of the samples. The peak around the Curie temperature gradually broadens with reduction of the particle size. The data obtained show that although variations in the magnetic entropy and adiabatic temperature decrease by lowering the particle size, variation in the relative cooling power values are the same for all samples. These results make this material a proper candidate in the magnetic refrigerator application above room temperature at moderate fields.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The plane strain shear fracture of the advanced high strength steels

The “shear fracture” which occurs at the high-curvature die radii in the sheet metal forming has been reported to remarkably limit the application of the advanced high strength steels (AHSS) in the automobile industry. However, this unusual fracture behavior generally cannot be predicted by the traditional forming limit diagram (FLD). In this research, a new experimental system was developed in order to simulate the shear fracture, especially at the plane strain state which is the most common state in the auto-industry and difficult to achieve in the lab due to sample size. Furthermore, the system has the capability to operate in a strain rate range from quasi-static state to the industrial forming state. One kinds of AHSS, Quenching-Partitioning (QP) steels have been performed in this test and the results show that the limiting fracture strain is related to the bending ratio and strain rate. The experimental data support that deformation-induced heating is an important cause of “shear fracture” phenomena for AHSS: a deformation-induced quasi-heating caused by smaller bending ratio and high strain rate produce a smaller limiting plane strain and lead a “shear fracture” in the component.

36 MATERIALS SCIENCE↗

The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS

To reduce weight and improve passenger safety there is an increased need in the automotive industry to use Ultra High Strength Steels (UHSS) for structural and crash components. However, the application of UHSS is restricted by their limited formability and the difficulty of forming them in conventional processes. An alternative method of manufacturing structural auto body parts from UHSS is the flexible roll forming process which can accommodate materials with high strength and limited ductility in the production of complex and weight-optimised components. However, one major concern in the flexible roll forming is web-warping, which is the height deviation of the profile web area. This paper investigates, using a numerical model, the effect on web-warping with respect to various forming methods. The results demonstrate that different forming methods lead to different amount of web-warping in terms of forming the product with identical geometry.

36 MATERIALS SCIENCE↗

A study of structural, optical and dielectric properties of crystalline Sr{sub 2}Nb{sub 2}O{sub 7} nanoparticles synthesized by a modified combustion technique

Nanocrystalline Strontium Pyroniobate is synthesized by a novel auto-igniting combustion technique. The X-Ray diffraction studies reveal that Strontium Niobate possesses orthorhombic structure. Phase purity and structure of the nanopowder is further examined using Fourier-Transform Infrared and Raman spectroscopy. The average particle size of the as prepared nanoparticles from the Transmission Electron Microscopy is 30 nm. Sr{sub 2}Nb{sub 2}O{sub 7} is a photoluminescent material and the optical band gap determined from the UV-DRS spectrum is 2.7eV. The sample is sintered at an optimized temperature of 1350°C for 2 hours and obtained maximum density. The dielectric constant and loss factor values obtained at 5MHz for a well-sintered Strontium Niobate pellet is found to be 40 and 3.9×10{sup −3} respectively, at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Perfect and robust phase-locking of a spin transfer vortex nano-oscillator to an external microwave source

We study the synchronization of the auto-oscillation signal generated by the spin transfer driven dynamics of two coupled vortices in a spin-valve nanopillar to an external source. Phase-locking to the microwave field h{sub rf} occurs in a range larger than 10% of the oscillator frequency for drive amplitudes of only a few Oersteds. Using synchronization at the double frequency, the generation linewidth is found to decrease by more than five orders of magnitude in the phase-locked regime (down to 1 Hz, limited by the resolution bandwidth of the spectrum analyzer) in comparison to the free running regime (140 kHz). This perfect phase-locking holds for frequency detuning as large as 2 MHz, which proves its robustness. We also analyze how the free running spectral linewidth impacts the main characteristics of the synchronization regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Parametric excitation in a magnetic tunnel junction-based spin torque oscillator

Using microwave current injection at room temperature, we demonstrate parametric excitation of a magnetic tunnel junction (MTJ)-based spin-torque oscillator (STO). Parametric excitation is observed for currents below the auto-oscillation threshold, when the microwave current frequency f{sub e} is twice the STO free-running frequency f{sub 0}. Above threshold, the MTJ becomes parametrically synchronized. In the synchronized state, the STO exhibits an integrated power up to 5 times higher and a linewidth reduction of two orders of magnitude, compared to free-running conditions. We also show that the parametric synchronization favors single mode oscillations in the case of multimode excitation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inhibition of beta-amyloid aggregation by fluorescent dye labels

The fluorescence decay of beta-amyloid's (Aβ) intrinsic fluorophore tyrosine has been used for sensing the oligomer formation of dye-labelled Aβ monomers and the results compared with previously studied oligomerization of the non-labelled Aβ peptides. It has been demonstrated that two different sized, covalently bound probes 7-diethylaminocoumarin-3-carbonyl and Hilyte Fluor 488 (HLF), alter the rate and character of oligomerization to different extents. The ability of HLF to inhibit formation of highly ordered structures containing beta-sheets was also shown. The implications of our findings for using fluorescence methods in amyloidosis research are discussed and the advantages of this auto-fluorescence approach highlighted.

60 APPLIED LIFE SCIENCES↗

CO{sub 2} isolated line shapes by classical molecular dynamics simulations: Influence of the intermolecular potential and comparison with new measurements

Room temperature absorption spectra of various transitions of pure CO{sub 2} have been measured in a broad pressure range using a tunable diode-laser and a cavity ring-down spectrometer, respectively, in the 1.6 μm and 0.8 μm regions. Their spectral shapes have been calculated by requantized classical molecular dynamics simulations. From the time-dependent auto-correlation function of the molecular dipole, including Doppler and collisional effects, spectral shapes are directly computed without the use of any adjusted parameter. Analysis of the spectra calculated using three different anisotropic intermolecular potentials shows that the shapes of pure CO{sub 2} lines, in terms of both the Lorentz widths and non-Voigt effects, slightly depend on the used potential. Comparisons between these ab initio calculations and the measured spectra show satisfactory agreement for all considered transitions (from J = 6 to J = 46). They also show that non-Voigt effects on the shape of CO{sub 2} transitions are almost independent of the rotational quantum number of the considered lines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Beam extraction and high stability operation of high current electron cyclotron resonance proton ion source

A high current electron cyclotron resonance proton ion source is designed and developed for the low energy high intensity proton accelerator at Bhabha Atomic Research Centre. The plasma discharge in the ion source is stabilized by minimizing the reflected microwave power using four stub auto tuner and magnetic field. The optimization of extraction geometry is performed using PBGUNS code by varying the aperture, shape, accelerating gap, and the potential on the electrodes. While operating the source, it was found that the two layered microwave window (6 mm quartz plate and 2 mm boron nitride plate) was damaged (a fine hole was drilled) by the back-streaming electrons after continuous operation of the source for 3 h at beam current of 20–40 mA. The microwave window was then shifted from the line of sight of the back-streaming electrons and located after the water-cooled H-plane bend. In this configuration the stable operation of the high current ion source for several hours is achieved. The ion beam is extracted from the source by biasing plasma electrode, puller electrode, and ground electrode to +10 to +50 kV, −2 to −4 kV, and 0 kV, respectively. The total ion beam current of 30–40 mA is recorded on Faraday cup at 40 keV of beam energy at 600–1000 W of microwave power, 800–1000 G axial magnetic field and (1.2–3.9) × 10{sup −3} mbar of neutral hydrogen gas pressure in the plasma chamber. The dependence of beam current on extraction voltage, microwave power, and gas pressure is investigated in the range of operation of the ion source.

43 PARTICLE ACCELERATORS↗

Influence of Ni substitution on structural and magnetic properties of Zn{sub 0.85−x}Ni{sub x}Mg{sub 0.05}Cu{sub 0.1}Fe{sub 2}O{sub 4} ferrite

Nano-crystalline Zn{sub 0.85−x}Ni{sub x}Mg{sub 0.05}Cu{sub 0.1}Fe{sub 2}O{sub 4}, (x = 0.0, 0.17, 0.34, 0.51, 0.68 and, 0.85), were synthesized by sol gel auto combustion method and, effect of Ni content on structural and magnetic properties is studied by x-ray diffraction (XRD) and, magnetic measurements. XRD confirms the formation of single phase spinel ferrite, with Scherrer's grain diameter ranging between 18.95 nm to 33.85 nm. Experimental and theoretical lattice parameter values suggest that the estimated cation distribution is close to the real distribution. Change in Ni-content leads to variation in cation distribution at site A, B and, migration of Cu{sup 2+} ion from B to A site. Ni{sup 2+} ion remains at both A and B site, but when Zn is fully replaced by Ni, it totally goes to A site. Coercivity and anisotropy constant values respectively ranges' between 251.2 to 372.4 Oe and 0.06 × 10{sup 5} to 0.80 × 10{sup 5} erg/cc. Best magnetization value of 43.7 emu/g was obtained for × = 0.68. Variation of magnetic properties can be understood in terms of observed changes in cation distribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of dynamic properties for NaK binary liquid alloy using first principle and theoretical predictions of isothermal bulk modulus using elastic constants

Study of atomic motions in the binary liquid alloys have been studied in terms of dynamical variables like velocity auto correlation, power spectrum and mean square displacement. Elastic constants and isothermal bulk modulus have been calculated to see the effeectiveness of ab-initio pseudopotentials which has been used in this paper. This appraoch is free from the fitting parameters and results obtained using this appraoch have been found very close to the average values.

36 MATERIALS SCIENCE↗

Effect of Co{sub 2+} substitution in Mg{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles: Study of structural, dielectric and magnetic properties

Polycrystalline samples of Mg{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} (0 ≤ x ≤ 0.5) with x varying from 0.0-0.5 synthesized by sol-gel auto ignition method. The X-ray diffraction analysis with Retvield refinement reveals the formation of single phase cubic spinel structure. The frequency dependent of real part of dielectric constant has been measured at room temperature and at 100 °C by using an ac impedance analyzer. Except x = 0.5, an increase in the dielectric constant is observed with increase in Co{sup 2+} substitution. Magnetic response has been seen by vibrating sample magnetometer (VSM) at room temperature. The saturation magnetization (M{sub S}) and coercivity (H{sub C}) increase with increasing the Co{sub 2+} substitution. The cation distribution estimated by Mössbauer spectroscopy shows that Co{sub 2+} and Mg{sub 2+} ions have their preference towards octahedral B site, on the other hand Zn{sub 2+} ions preferentially occupy tetrahedral A site, whereas Fe{sub 3+} ions are randomly distributed over A- and B-site. The as obtained results indicated that the substitution of Co{sub 2+} has brought the significant changes in the structural, electrical and magnetic properties of as prepared Mg-Zn-Co multioxide nanocrystals.

36 MATERIALS SCIENCE↗

Magnetic origin of dielectric transition in BiFeO{sub 3}

Magnetic relaxation measurements at 5K, 50K and 120K on BiFeO{sub 3} prepared by sol-gel auto combustion method shows stretched -exponential decay. These results shows the two factors viz, cooperative dynamics and rate of dynamics of spin, may be responsible for the low temperature magnetic-glassy behavior, concluded from bifurcation of zero field cooled (ZFC) and field cooled (FC) data of dc magnetization. Temperature dependent dielectric measurement shows a possible phase transition, seen in the dielectric-relaxation time and dielectric constant in the range 200 – 240K. Comparison of dielectric and magnetization data indicates a possibility of magneto-electric coupling.

36 MATERIALS SCIENCE↗

Physics of the multi-functionality of lanthanum ferrite ceramics

In the present work, we have illustrated the physics of the multifunctional characteristics of nano-crystalline LaFeO{sub 3} powder prepared using auto-combustion synthesis. The synthesized powders were phase pure and crystallized into centro-symmetric Pnma space group. The temperature dependence of dielectric constant of pure LaFeO{sub 3} exhibits dielectric maxima similar to that observed in ferroelectric ceramics with non-centrosymmetric point group. The dielectric relaxation of LaFeO{sub 3} correlates well with small polaron conduction. The occurrence of polarization hysteresis in LaFeO{sub 3} (with centro-symmetric Pnma space group) is thought to be spin current induced type. The canting of the Fe{sup 3+} spins induce weak ferromagnetism in nano-crystalline LaFeO{sub 3}. Room temperature saturation magnetization of pure LaFeO{sub 3} is reported to be 3.0 emu/g. Due to the presence of both ferromagnetic as well as polarization ordering, LaFeO{sub 3} behaves like a single phase multiferroic ceramics. The magneto-electric coupling in this system has been demonstrated through the magneto-dielectric measurements which yield about 0.8% dielectric tuning (at 10 kHz) with the application of 2 T magnetic field. As a typical application of the synthesized nano-crystalline LaFeO{sub 3} powder, we have studied its butane sensing characteristics. The efficient butane sensing characteristics have been correlated to their catalytic activity towards oxidation of butane. Through X-ray photoelectron spectroscopy analyses, we detect the surface adsorbed oxygen species on LaFeO{sub 3} surface. Surface adsorbed oxygen species play major role in their low temperature butane sensing. Finally, we have hypothesized that the desorbed H{sub 2}O and O{sub 2} (originate from surface adsorbed hydroxyl and oxygen) initiate the catalytic oxidative dehydrogenation of n-butane resulting in weakening of the electrostatics of the gas molecules.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-generation and management of spin-electromagnetic wave solitons and chaos

Self-generation of microwave spin-electromagnetic wave envelope solitons and chaos has been observed and studied. For the investigation, we used a feedback active ring oscillator based on artificial multiferroic, which served as a nonlinear waveguide. We show that by increasing the wave amplification in the feedback ring circuit, a transition from monochromatic auto-generation to soliton train waveform and then to dynamical chaos occurs in accordance with the Ruelle-Takens scenario. Management of spin-electromagnetic-wave solitons and chaos parameters by both dielectric permittivity and magnetic permeability of the multiferroic waveguiding structure is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Helium in chirped laser fields as a time-asymmetric atomic switch

Tuning the laser parameters exceptional points in the spectrum of the dressed laser helium atom are obtained. The weak linearly polarized laser couples the ground state and the doubly excited P-states of helium. We show here that for specific chirped laser pulses that encircle an exceptional point one can get the time-asymmetric phenomenon, where for a negative chirped laser pulse the ground state is transformed into the doubly excited auto-ionization state, while for a positive chirped laser pulse the resonance state is not populated and the neutral helium atoms remains in the ground state as the laser pulse is turned off. Moreover, we show that the results are very sensitive to the closed contour we choose. This time-asymmetric state exchange phenomenon can be considered as a time-asymmetric atomic switch. The optimal time-asymmetric switch is obtained when the closed loop that encircles the exceptional point is large, while for the smallest loops, the time-asymmetric phenomenon does not take place. A systematic way for studying the effect of the chosen closed contour that encircles the exceptional point on the time-asymmetric phenomenon is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗