Search NASA⌕ Search

SEARCH · Search NASA

Results for “Additive decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Catalytic processes in the atmospheres of earth and Venus

Photochemical processes in planetary atmospheres are strongly influenced by catalytic effects of minor constituents. Catalytic cycles in the atmospheres of Earth and Venus are closely related. For example, chlorine oxides (ClOx) act as catalysts in the two atmospheres. On earth, they serve to convert odd oxygen (atomic oxygen and ozone) to molecular oxygen. On Venus they have a similar effect, but in addition they accelerate the reactions of atomic and molecular oxygen with carbon monoxide. The latter process occurs by a unique combination of ClOx catalysis and sulful dioxide photosensitization. The mechanism provides an explanation for the very low extent of carbon dioxide decomposition by sunlight in the Venus atmosphere.

Demore, W. B.↗

A finite element method for the thermochemical decomposition of polymeric materials. II - Carbon phenolic composites

A previously developed formulation for modeling the thermomechanical behavior of chemically decomposing, polymeric materials is verified by simulating the response of carbon phenolic specimens during two high temperature tests: restrained thermal growth and free thermal expansion. Plane strain and plane stress models are used to simulate the specimen response, respectively. In addition, the influence of the poroelasticity constants upon the specimen response is examined through a series of parametric studies.

Sullivan, R. M.↗

Synthesis and enhanced light absorption of alumina matrix nanocomposites containing multilayer oxide nanorods and silver nanoparticles

Highlights: {yields} Multilayer oxide nanorods (nanocables) were obtained via chemical processing. {yields} Ag nanoparticles were deposited between the core and shell layers of the nanorods. {yields} The structure and composition of the nanorods were analyzed by SEM and TEM. {yields} CoO nanorods and Ag nanoparticles enhance light absorption of the nanocomposites. -- Abstract: In this paper, multilayer oxide nanorods were deposited in the nanopores of anodic aluminum oxide (AAO) via solution infiltration followed by heat treatment. The nanorods have a core-shell structure. First, the shell (nanotube) with the thickness of about 40 nm was made of TiO{sub 2} through the hydrolysis of (NH{sub 4}){sub 2}TiF{sub 6}. Second, silver nanoparticles with the diameter of about 3 nm were added into the TiO{sub 2} layer through thermal decomposition of AgNO{sub 3} at elevated temperatures. Then, cylindrical cores (nanorods) of CoO and ZnO with 200 nm diameter were prepared, respectively. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the structure and composition of the nanorods. UV-vis light absorption measurements in the wavelength range from 350 to 1000 nm were performed to study the effect of nanorod and nanoparticle addition on the light absorption property of the alumina nanocomposites. It is found that CoO nanorods increase the light absorption of the alumina matrix composite in the wavelength range from 500 nm to 800 nm, but the TiO{sub 2} shell does not increase the light absorption much. The ZnO nanorods do not change the light absorption either. However, the addition of silver nanoparticles significantly enhances light absorption of both AAO/TiO{sub 2}/Ag/CoO and AAO/TiO{sub 2}/Ag/ZnO nanocomposites. This increase in the visible light absorption reveals that there exists surface plasmon around the fine silver nanoparticles in the nanorods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large scale synthesis of nanostructured zirconia-based compounds from freeze-dried precursors

Nanocrystalline zirconia powders have been obtained at the multigram scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous acetic solutions. This technique has equally made possible to synthesize a variety of nanostructured yttria or scandia doped zirconia compositions. SEM images, as well as the analysis of the XRD patterns, show the nanoparticulated character of those solids obtained at low temperature, with typical particle size in the 10-15 nm range when prepared at 673 K. The presence of the monoclinic, the tetragonal or both phases depends on the temperature of the thermal treatment, the doping concentration and the nature of the dopant. In addition, Rietveld refinement of the XRD profiles of selected samples allows detecting the coexistence of the tetragonal and the cubic phases for high doping concentration and high thermal treatment temperatures. Raman experiments suggest the presence of both phases also at relatively low treatment temperatures. - Graphical abstract: Zr{sub 1-x}A{sub x}O{sub 2-x/2} (A=Y, Sc; 0{<=}x{<=}0.12) solid solutions have been prepared as nanostructured powders by thermal decomposition of precursors obtained by freeze-drying, and this synthetic procedure has been scaled up to the 100 g scale. Highlights: Black-Right-Pointing-Pointer Zr{sub 1-x}A{sub x}O{sub 2-x/2} (A=Y, Sc; 0{<=}x{<=}0.12) solid solutions have been prepared as nanostructured powders. Black-Right-Pointing-Pointer The synthetic method involves the thermal decomposition of precursors obtained by freeze-drying. Black-Right-Pointing-Pointer The temperature of the thermal treatment controls particle sizes. Black-Right-Pointing-Pointer The preparation procedure has been scaled up to the 100 g scale. Black-Right-Pointing-Pointer This method is appropriate for the large-scale industrial preparation of multimetallic systems.

36 MATERIALS SCIENCE↗

TATB thermal decomposition: Expanding the molecular profile with cryo-focused pyrolysis GC-MS

Understanding the molecular composition of high explosives during thermal decomposition is vital for predicting the sensitivity, safety, and performance of explosive materials. The thermal decomposition of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) has been linked to the formation of furazans through a series of dehydration reactions of the NO2 and NH2 groups on the phenyl ring, along with breakdown into small molecules (≤120 amu). Molecular identification of compounds formed in this transformation of the furazans to light gases has been lacking. To address this, we have applied a pseudo-confined sampling system in a cryo-focused pyrolysis gas chromatography-mass spectrometry (pyGC-MS) system to molecularly identify these intermediates. By design, sublimation of TATB, which has complicated MS analyses of thermal degradation, was significantly reduced and additional compounds were identified with potential structural information. In addition to the known furazan compounds, one of these compounds forms from the loss of oxygen from benzo-trifurazan (F3) and produces an open ring structure that may be the first step in the formation of lower molecular weight furazan breakdown products. The loss of a nitro group from benzo-monofurazan (F1) was also discovered and implicates the formation of oxidizing NO2 gas in the thermal decomposition mechanism. So these findings are vital for understanding the proper heat flow from energetic materials on a molecular level, necessary when measuring enthalpy and developing decomposition models based on kinetic parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A high-performance and durable direct NH 3 tubular protonic ceramic fuel cell integrated with an internal catalyst layer

Nickel-based cermet anode-supported protonic ceramic fuel cells (PCFCs) show great potential for direct utilization of ammonia. However, the insufficient activity of anode and the deterioration of anode activity/durability caused by the undesired interaction between nickel and ammonia greatly limit the application. Here, we report tubular PCFCs embedded with a catalytic iron layer. Such cells show peak power densities of 1.507 W cm -2 and 1.078 W cm -2 at 700 °C when using H 2 and NH 3 as fuel, respectively, which are the highest tubular PCFC performance so far ever reported. In addition, the stability of cells with the catalyst layer has been dramatically enhanced when compared with that of cells without the catalyst layer. As a result, the enhancement of activity and durability is attributed to the catalytic activity of iron for ammonia decomposition, through which the direct contact between nickel and ammonia has been minimized and the anode structure has therefore been protected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comprehensive experimental and kinetic modeling study of di-isobutylene isomers: Part 2

A wide variety of high temperature experimental data obtained in this study complement the data on the oxidation of the two di-isobutylene isomers presented in Part I and offers a basis for an extensive validation of the kinetic model developed in this study. Due to the increasing importance of unimolecular decomposition reactions in high-temperature combustion, we have investigated the di-isobutylene isomers in high dilution utilizing a pyrolysis microflow reactor and detected radical intermediates and stable products using vacuum ultraviolet (VUV) synchrotron radiation and photoelectron photoion coincidence (PEPICO) spectroscopy. Additional speciation data at oxidative conditions were also recorded utilizing a plug flow reactor at atmospheric pressure in the temperature range 725-1150 K at equivalence ratios of 1.0 and 3.0 and at residence times of 0.35 s and 0.22 s, respectively. Combustion products were analyzed using gas chromatography (GC) and mass spectrometry (MS). Ignition delay time measurements for di-isobutylene were performed at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 diluted in 'air' in the temperature range 900-1400 K using a high-pressure shock-tube facility. New measurements of the laminar burning velocities of di-isobutylene/air flames are also presented. The experiments were performed using the heat flux method at atmospheric pressure and initial temperatures of 298-358 K. Moreover, data consistency was assessed with the help of analysis of the temperature and pressure dependencies of laminar burning velocity measurements, which was interpreted using an empirical power-law expression. Electronic structure calculations were performed to compute the energy barriers to the formation of many of the product species formed. The predictions of the present mechanism were found to be in adequate agreement with the wide variety of experimental measurements performed.

09 BIOMASS FUELS↗

Double sweep preconditioner for optimized Schwarz methods applied to the Helmholtz problem

This paper presents a preconditioner for non-overlapping Schwarz methods applied to the Helmholtz problem. Starting from a simple analytic example, we show how such a preconditioner can be designed by approximating the inverse of the iteration operator for a layered partitioning of the domain. The preconditioner works by propagating information globally by concurrently sweeping in both directions over the subdomains, and can be interpreted as a coarse grid for the domain decomposition method. The resulting algorithm is shown to converge very fast, independently of the number of subdomains and frequency. The preconditioner has the advantage that, like the original Schwarz algorithm, it can be implemented as a matrix-free routine, with no additional preprocessing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fluoroalkyl-functional imidazoles and imidazolium–based ionic liquids prepared via thiol-ene/yne click chemistry

A fluorinated thiol was systematically investigated against a diverse set of –ene- and –yne-bearing imidazole and imidazolium substrates in the pursuit of new cation-fluorinated, omniphobic (hydrophobic and oleophobic) ionic liquids for aerospace applications. Compounds were prepared using UV-initiated click chemistry at quantitative conversion and purified with relative ease. Seven ionic liquids were synthesized and have isolated yields ranging from 74% to >99%. Five of the new cation-fluorinated ionic liquids are hydrophobic and two are liquids at room temperature. In addition to hydrophobicity, the seven ionic liquids’ solubilities were qualitatively examined across a wide spectrum of conventional organic solvents. Of note, the majority of the prepared ionic liquids are insoluble in water and hexanes yet soluble in methanol, acetone, acetonitrile, and dichloromethane. In addition to intriguing solubility properties, the ionic liquids in this study have high densities without the incorporation of heavy atoms, ranging from 1.596 to 1.924 g cm –3 . The fluorinated salts also show good short-term thermal stability in air, with decomposition temperatures ranging from 215 °C to 320 °C. Other relevant characterization methods include spectroscopy, thermal analysis, and physical property measurements where appropriate. The X-ray crystal structure of a divalent, cation-fluorinated ionic liquid from this study was also obtained and shows unique fluorous domains in the extended structure, providing valuable insight into the materials’ physical properties. Furthermore, this work highlights a family of compounds moving towards omniphobic ionic liquids yielding potential possibilities for future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical reactivity and passivation of organic electrolytes at spinel MgCrMnO 4 cathode interfaces for rechargeable high voltage magnesium-ion batteries

Magnesium transition metal oxides such as MgCr 2−x Mn x O 4 are promising high-voltage and high-capacity cathode materials for rechargeable magnesium batteries (RMBs). Understanding and improving the chemical and electrochemical stability of the cathode–electrolyte interface (CEI) has been the primary technical emphasis to enable this category of cathode materials, which has been significantly underexplored. Herein, in this study, we focus on investigating the fundamental mechanism of parasitic reactions at the charged surface of the high-voltage MgCrMnO 4 model cathode with different organic electrolytes. The aim is to reveal the underlying effect of anions and solvents responsible for the passivation behavior of the cathode by using three exemplary anions: [(CF 3 SO 2 ) 2 N] − (TFSI − ), Al[OC(CF 3 ) 3 ] 4 − (TPFA − ), and [CB 11 H 12 ] − (MC) and three solvents: diglyme (G2), triglyme (G3), and 3-methoxypropylamine (MPA). High precision leakage current measurements during potentiostatic hold reveal that the electrolyte solvent chemistry has a more profound impact than anion's on the passivation of the MgCrMnO 4 cathode surface during deintercalation of Mg 2+ . X-ray photoelectron spectroscopy exhibits the differences in CEI composition. Amine solvents like MPA show poor passivation due to a higher degree of solvent decomposition, while the thin and anion-derived CEI in glyme-based electrolytes is directly linked with the better passivation behavior on the cathode. Furthermore, we leverage the knowledge from these findings to modify the electrolyte structure by adding a solvent additive, with the goal of reducing the parasitic reaction.

25 ENERGY STORAGE↗

Build Optimization Software Tools (BOOST) v2.0.0

Build Optimization Software Tools (BOOST) accelerate the design of DNA, RNA and protein sequences for their synthesis and assembly in an automated and scalable fashion. The BOOST Juggler automates the following two design tasks: - Reverse-Translation of protein sequences into DNA sequences - Codon Juggling of DNA sequences The BOOST Polisher provides the following design tasks: - The Verification of DNA sequences against DNA synthesis constraints - The Modification of DNA sequences in case they violate any DNA synthesis constraint In addition, the BOOST Polisher can be instructed to verify and modify DNA sequences against sequence patterns, such as restriction sites. The BOOST Partitioner supports both Gibson/chewback and Yeast assembly (also known as Transformation-Associated Recombination, or TAR) methods when performing the decomposition of large sequences that exceed the maximum length of DNA synthesis into synthesizable building blocks. The Partitioner can be instructed to find building blocks with appropriate overlap sequences, making their assembly into the complete construct more efficient. BOOST Workflows enable, in a customized fashion, the execution of the Juggler, Polisher, and Partitioner tools on a batch of sequences.

Sharkey, Michael↗

EBS Report - LANL Experimental update of buffer/backfill at elevated P,T

The Used Fuel Disposition campaign is presently investigating various generic repository options for disposal of used fuel. Of interest are the disposal of high heat load canisters (up to 300 °C), which may allow for a reduced repository footprint. The focus of this experimental work is to increase our understanding on the stability of bentonite barriers under different geochemical and mineralogical conditions other than what has been previously investigated. Experiments were performed at 150 – 160 bars at temperatures up to 300 °C for five to six weeks. Unprocessed Wyoming bentonite was saturated with a K-Ca-Na-Cl-rich water at a 9:1 water:rock ratio. Experiments contained various steel plates or Cu-foil and were buffered to low Eh conditions using magnetite and metallic iron. Other experiments for international EBS research included mixed buffers and a heated bentonite with 20 wt. % free moisture for LBNL. The mixed buffer experiments (bentonite-graphite, bentonite-quartz sand) were conducted to investigate potential mineralogic/petrologic changes to mixed buffer systems proposed by the German nuclear repository program. Reaction products associated with the international EBS research were characterized by LANL with thermal-mechanical properties to be characterized by LBNL. The pH, K + , and Ca 2+ concentrations dropped, while SiO 2(aq) , Na + , and SO 4 2- concentrations increased throughout the experiments. The alkali and alkaline earth metals aqueous concentrations appear to be buffered via the montmorillonite and clinoptilolite exchange reactions. Illite or illite/smectite mixed-layer formation is significantly retarded in the closed system due to Na+ and SiO2(aq) accumulation and limited K + supply. Precursor clinoptilolite underwent extensive dissolution during the six week, 300 °C experiments subsequently producing a high-silicon analcime in addition to authigenic silica phases. Analcime and feldspar formation partially sequesters aqueous Al 3+ , thereby potentially inhibiting illitization. Associated with the zeolite alteration is a ~ 17 % volume decrease (assuming quartz formation) that translates into ~ 2% volume loss in the bulk bentonite. Pyrite decomposition is first observed at ~210 °C, generating available H 2 S (aq,g) that reacts with metal plates or evolves as a gas. The copper rapidly degrades in the presence of H 2 S (aq,g) , resulting in the formation of a chalcocite crust on the copper. A layer of Fe-saponite (or rarely, chlorite) forms at the steel bentonite interface, potentially acting as a passivating agent to retard further metal corrosion. Zeolite mineralogy alteration, metal-bentonite interface reactions, and illitization retardation under these experimental repository conditions are important considerations for the long-term stability evaluation of a used fuel repository.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Antifoam Degradation Products in Off Gas and Condensate of Sludge Batch 9 Simulant Nitric-Formic Flowsheet Testing for the Defense Waste Processing Facility

Ten chemical processing cell (CPC) experiments were performed using simulant to evaluate Sludge Batch 9 for sludge-only and coupled processing using the nitric-formic flowsheet in the Defense Waste Processing Facility (DWPF). Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) cycles were performed on eight of the ten. The other two were SRAT cycles only. Samples of the condensate, sludge, and off gas were taken to monitor the chemistry of the CPC experiments. The Savannah River National Laboratory (SRNL) has previously shown antifoam decomposes to form flammable organic products, (hexamethyldisiloxane (HMDSO), trimethylsilanol (TMS), and propanal), that are present in the vapor phase and condensate of the CPC vessels. To minimize antifoam degradation product formation, a new antifoam addition strategy was implemented at SRNL and DWPF to add antifoam undiluted.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An introduction to the theory and use of SESAME equations of state

This paper details aspects of the three-component, Helmholtz free energy, equation of state (EOS) model that serves as the construction basis for the majority of the tabular equations of state residing in the SESAME database. The three components account for contributions to the total free energy from the cold curve (or zero Kelvin isotherm), the nuclear vibrational excitations, and the thermal electronic excitations. Decomposition of the model into these three components is a consequence of the underlying theoretical framework describing materials in the condensed matter phase since each of the free energy components directly correspond to a term in the condensed matter system Hamiltonian. In addition to providing an introduction to the theoretical basis of the three-component model and an account of the empirical data utilized to construct an EOS, the aim of this paper is to enable readers to evaluate the applicability of a particular EOS within the context of a problem they are solving by reviewing the thermodynamic phase space in which it has been appropriately constrained. This paper does not aim to serve as an exhaustive documentation of the various methods used in construction of the SESAME tables. Instead, it focuses on the models used during the construction of a particular EOS for aluminum performed by Sjostrom et al. [SCR16] as an illustrative example.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Response of Explosives to Accidental Stimuli

This brief discussion of the non-shock response of explosives is intended to introduce the reader to the basic concepts involved, and as additional reading to a live class on the subject. Explosives are generally designed to detonate – a specific kind of explosion in which a shock wave – a supersonic discontinuity in pressure, density and particle velocity – passes through the material and triggers fast chemical decomposition, liberating energy that is available to support the shock wave which would otherwise die out. The result may perhaps be usefully visualized as a rocket-propelled shock wave. Ideally, an explosive would detonate reliably when required while behaving as an inert material in all other circumstances. Modern engineered explosives, such as those used in nuclear weapons, largely meet the first criterion but fail the second because, even though they are very difficult to detonate unintentionally, they also exhibit non-detonative energetic decomposition responses to accidental stimuli that can range from mild to very violent. There are two distinct elements to a full understanding of this regime of behavior: 1. How do accidental stimuli cause the onset of decomposition? 2. What determines the violence of the ensuing reaction? In order to understand these elements, we must first consider the full range of behaviors of commonly used explosives. This course is intended to introduce the student to the basic concepts and to encourage further reading on the subject.

42 ENGINEERING↗

The generation of hydrogen by the thermal decomposition of water

Development of an approach to the evaluation of the thermal efficiency of the process of water splitting to produce hydrogen. A way of viewing thermochemical processes - both overall and step-by-step is suggested, and some recent work on a process evaluation technique is described which provides internal checks on the thermodynamic data and calculates, in addition to the efficiency, many important process parameters.

Funk, J. E.↗

Analytical ultrasonics for characterization of metallurgical microstructures and transformations

The application of contact (piezoelectric) and noncontact (laser generation and detection) ultrasonic techniques for dynamic investigation of precipitation hardening processes in aluminum alloys, as well as crystallization and phase transformation in rapidly solidified amorphous and microcrystalline alloys is discussed. From the variations of the sound velocity and attenuation the precipitation mechanism and kinetics were determined. In addition, a correlation was established between the observed changes in the velocity and attenuation and the mechanical properties of age-hardenable aluminum alloys. The behavior of the elastic moduli, determined ultrasonically, were found to be sensitive to relaxation, crystallization and phase decomposition phenomena in rapidly solidified metallic glasses. Analytical ultrasonics enables determination of the activation energies and growth parameters of the reactions. Therefrom theoretical models can be constructed to explain the changes in mechanical and physical properties upon heat treatment of glassy alloys. The composition dependence of the elastic moduli in amorphous Cu-Zr alloys was found to be related to the glass transition temperature, and consequently to the glass forming ability of these alloys. Dynamic ultrasonic analysis was found to be feasible for on-line, real-time, monitoring of metallurgical processes.

Rosen, M.↗

Investigations on RELAP5-3D to RELAP5-3D coupling methodology by PVMEXEC

In the framework of a BEPU (Best Estimate Plus Uncertainty) approach within the licensing process of a nuclear power plant, the need to extend the resources of nuclear system thermal-hydraulics codes, such as RELAP5-3D, arises to allow more detailed simulations of the complex 3D reality of Nuclear Power Plants (NPPs), either under normal steady-state or during various accident scenarios. Currently, it is not possible to achieve the same degree of detail for a whole nuclear system when it is simulated with RELAP5-3D and this is due to the inherent limitations in the number of components and volumes to be used for the analysis. For this reason, it is of extreme interest the use of tools for codes coupling that enable the use of different codes for the simulation of different portions of a system in a unified analysis. In this paper the attention will be focused on the decomposition of the thermal-hydraulic domain of a system into subsystems to be simulated by different instances of the same code (e.g. RELAP5-3D) coupled together by means of PVMEXEC program and parallel virtual machine (PVM) technology. Explicit and semi-implicit solution algorithms were used for the analyses. Among the analyzed cases, the following will be discussed in detail with the aim to provide additional guidelines for the use of the PVMEXEC tool: (i) the Edward's pipe blowdown test, (ii) a simplified countercurrent heat exchanger, (iii) different hydraulics and heat structure coupling schemes for a shell-tube heat exchanger and (iv) a three-task coupled model of an adaptation of the Christensen subcooled boiling experiment. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗