Search NASA⌕ Search

SEARCH · Search NASA

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Potential-induced degradation in solar cells: Electronic structure and diffusion mechanism of sodium in stacking faults of silicon

Sodium decorated stacking faults (SFs) were recently identified as the primary cause of potential-induced degradation in silicon (Si) solar-cells due to local electrical short-circuiting of the p-n junctions. In the present study, we investigate these defects by first principles calculations based on density functional theory in order to elucidate their structural, thermodynamic, and electronic properties. Our calculations show that the presence of sodium (Na) atoms leads to a substantial elongation of the Si-Si bonds across the SF, and the coverage and continuity of the Na layer strongly affect the diffusion behavior of Na within the SF. An analysis of the electronic structure reveals that the presence of Na in the SF gives rise to partially occupied defect levels within the Si band gap that participate in electrical conduction along the SF.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enthalpy and entropy of oxygen electroadsorption on RuO 2 (110) in alkaline media

We report the temperature influence of the OHad and Oad electroadsorption on RuO 2 (110) films grown on TiO 2 (110) crystals in alkaline media. From the temperature effect, we evaluate the enthalpy and entropy of the OH ad and O ad electroadsorption, including the adsorbate–adsorbate interactions that we analyze using the interaction parameters of the Frumkin-isotherm model. We found that the adsorbates repel each other enthalpically but attract each other entropically. Our result suggests that an entropy analysis is necessary to capture the electroadsorption behavior on RuO 2 since the enthalpy–entropy competition strongly influences the electroadsorption behavior. Our observation of an entropic force is consistent with the view that water may be a mediator for adsorbate–adsorbate interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mitigation of resistive drift wave and ion temperature gradient instabilities by velocity shear

The effects of velocity shear on the resistive drift wave instability in the non-adiabatic limit and the toroidal ion temperature gradient instability are investigated for a plasma of inhomogeneous density/ion temperature, respectively. For the resistive drift wave, we find that the instability growth rate decreases monotonically with increasing magnitude of shear, but we find that complete stabilization is impossible. For the ion temperature gradient instability, we find that the standard WKB approximation is insufficient to describe the full behavior of the instability, and that an analysis of the localized eigenmode problem reveals two separate unstable solutions, which the WKB approximation does not predict. The impact of flow shear on these two new unstable solutions is discussed. In both resistive drift wave and ion temperature gradient instabilities, the sheared flow causes a shifting, tilting, and sharpening of the electrostatic potential eddies.

Physics↗

On discriminating tokamak sawtooth crash models via localized density and temperature measurements

The core electron temperature drops rapidly during the sawtooth crash in tokamak plasmas, which causes heat loss and may lead to fast particle losses or even a disruption. Several models have been proposed for the periodic crash, including the Kadomtsev model with magnetic reconnection and the quasi-interchange model with the growth of higher-mode-number pressure-driven instabilities. 3D MHD simulations were performed for these two models with a goal to develop intuition and to predict qualitatively how different types of sawtooth will appear in various diagnostics. The structures of electron density ne and electron temperature Te show a dominant (1, 1) mode for the Kadomtsev case and a dominant (4, 4) mode for the quasi-interchange case. The oscillations of ne and Te have a positive correlation near the inversion layer for both cases, while their frequencies and amplitudes are different depending on the dominant modes. Particularly, for the Kadomtsev case, we find a relation between the amount of flux reconnected during a sawtooth event and ne or Te oscillations. Therefore, we connect recently developed measurement capabilities for ne and Te to the internal sawtooth behavior. We propose that this method of analysis can help in identifying the type of sawtooth in future experiments augmented by simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anomaly Detection for Online Monitoring of Thermocouple Sensors in the Advanced Test Reactor

This study explores data-driven anomaly detection methods to analyze sensor fail- ures in the Advanced Gas Reactor (AGR) nuclear fuel irradiation experiments. Specifically, we examine failures of thermocouples (TCs), which are critical for mon- itoring and controlling in-reactor temperatures during operation. Failures were pri- marily observed during abrupt power transitions and manifested as sensor drop-outs, drifts, or unexplained behavior. We applied three time-series analysis techniques— rolling mean smoothing, matrix profile, and vector auto-regression (VAR)—to de- tect anomalies in TC data prior to failure events. The rolling mean method effec- tively highlighted deviations aligned with reported failures, while the matrix profile provided partial early warning but sometimes flagged normal fluctuations during power-down periods. VAR shows potential in capturing multivariate dependencies but requires further calibration. A rare case of TC drift was also documented, which did not result in failure, underscoring the challenge of building predictive models with sparse positive examples. Our findings demonstrate that traditional statistical tools can aid anomaly detection but have limited predictive power without richer training data. We propose future directions including synthetic data generation, real- time surrogate modeling, and multi-modal feature integration. This work provides a foundation for applying robust anomaly detection frameworks to mission-critical sensor systems in experimental settings.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

THE DYNAMIC EVOLUTION OF YOUNG EXTRAGALACTIC RADIO SOURCES

The evolution of symmetric extragalactic radio sources can be characterized by four distinct growth stages of the radio luminosity versus size of the source. The interaction of the jet with the ambient medium results in the formation and evolution of sources with non-standard (flaring) morphology. In addition, cessation or restarting of the jet power and obstruction of the jet will also result in distinct morphological structures. The radio source population may thus be classified in morphological types that indicate the prevailing physical processes. Compact symmetric objects (CSOs) occupy the earliest evolutionary phase of symmetric radio sources and their dynamical behavior is fundamental for any further evolution. Analysis of CSO dynamics is presented for a sample of 24 CSOs with known redshift and hotspot separation velocity and with a large range of radio power. Observables such as radio power, separation between two hotspots, hotspot separation velocity, and kinematic age of the source are found to be generally consistent with the self-similar predictions for individual sources that reflect the varying density structure of the ambient interstellar medium. Individual sources behave different from the group as a whole. The age and size statistics confirm that a large fraction of CSOs does not evolve into extended doubles.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploring nonlinear Rashba effect and spin Hall conductivity in Janus MXenes W 2 ⁢CO ⁢𝑋 (𝑋=S, Se, Te)

Rashba spin-orbit coupling (RSOC) facilitates spin manipulation without relying on an external magnetic field, opening up exciting possibilities for advanced spintronic devices. In this paper, we examine the effects of crystal momentum (𝑘) nonlinearity and anisotropy on the conventional Rashba effect, with a particular focus on their impact on the spin Hall conductivity (SHC) in a newly predicted family of 2D Janus materials, W 2 ⁢CO⁢𝑋 (𝑋 =S, Se, Te). Using first-principles density functional theory calculations, we confirm the dynamical and mechanical stability of the studied 2D materials. Strikingly, this materials family exhibits pronounced nonlinear Rashba spin splitting at the Γ point of Brillouin zone near the Fermi level, which cannot be adequately described by the linear-𝑘 Rashba model. Therefore, third-order momentum contributions (𝑘 3 ) must be incorporated into the Rashba Hamiltonian. Our analysis reveals that among the studied systems, W 2 ⁢COS exhibits the highest 𝑘 3 contribution of −45.9 eV Å 3 , despite having the lowest linear Rashba constant. Here, a detailed analysis of electronic structure reveals topologically nontrivial behavior in these 2D materials, yielding sizable SHC that is primarily governed by the nonlinear Rashba effect. Notably, these materials also exhibit large spin Hall angle (0.018–2.5 at E 𝐹 ), which is comparable to that of in bulk topological insulators like Bi 2 ⁢Se 3 and Bi 2 ⁢Te 3 , and surpassing those in narrow bandgap bulk semiconductors GeTe and SnTe, as well as heavy metals such as Pt. Sizable SHC, large spin Hall angles, and the ability to tune SHC via electric fields without altering the topological properties, rooted in the crystal field splitting, underscore the potential of these materials for spintronic applications.

Electronic structure↗

Dynamic heterogeneities, boson peak and activation volume in glass-forming liquids

There are various arguments and models connecting the characteristic length associated with the boson peak vibrations to the length scale of dynamical heterogeneity Lhet. is usually defined as the ratio of the transverse sound velocity to the boson peak frequency. Here we present pressure, temperature, and molecular weight dependencies of , estimated using light scattering, in a few molecular and polymeric glass formers. These dependencies are compared with respective dependencies of the activation volume V # in the same materials. Good agreement is found for the pressure and molecular weight dependencies of and V # measured at the glass transition temperature Tg. These results provide more evidence for a possible relationship between the sensitivity of structural relaxation to density (activation volume) and the heterogeneity volume. However, contrary to the expectations for Lhet, does not decrease with temperature above Tg in most of the studied materials. The temperature dependence of is compared to that of Lhet in glycerol and orthoterphenyl (OTP) estimated from literature data. The analysis shows a clear difference in the behavior of (T) and V #(T) at temperatures above Tg, although V #(T)1/3 and Lhet(T) have similar temperature dependence. Possible reasons for the observed difference are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Statistical Analysis of Inter-Area Oscillations in the U.S. Eastern Interconnection: A 2017-2023 Perspective

Recent advancements and the accumulation of high-resolution, long-term phasor measurement unit (PMU) data have provided detailed insights into inter-area oscillations in power grids. This study conducts a comprehensive statistical analysis of inter-area oscillations within the United States Eastern Interconnection from 2017 to 2023. Utilizing data captured by the advanced wide-area Frequency Monitoring Network (FNET/GridEye), this investigation examines the occurrence patterns, dominant frequencies, damping ratios, and excitation mechanisms of these oscillations. Our analysis sheds light on the evolving statistical behaviors of inter-area oscillations, offering updated and critical information for grid operators and planners. The insights gained from this study can be instrumental in enhancing the operational resilience of the power network and guiding strategic developments in grid infrastructure to accommodate future challenges. Additionally, the study discusses emerging challenges associated with the modernization of the power grid, including increased renewable penetration, dynamic load variability, and cyber-physical vulnerabilities that complicate oscillation monitoring and control.

Inter-area oscillations↗

Multivariate Empirical Mode Decomposition Based Signal Analysis and Efficient-Storage in Smart Grid

Wide-area-measurement systems (WAMSs) are used in smart grid systems to enable the efficient monitoring of grid dynamics. However, the overwhelming amount of data and the severe contamination from noise often impede the effective and efficient data analysis and storage of WAMS generated measurements. To solve this problem, we propose a novel framework that takes advantage of Multivariate Empirical Mode Decomposition (MEMD), a fully data-driven approach to analyzing non-stationary signals, dubbed MEMD based Signal Analysis (MSA). The frequency measurements are considered as a linear superposition of different oscillatory components and noise. The low-frequency components, corresponding to the long-term trend and inter-area oscillations, are grouped and compressed by MSA using the mean shift clustering algorithm. Whereas, higher-frequency components, mostly noise and potentially part of high-frequency inter-area oscillations, are analyzed using Hilbert spectral analysis and they are delineated by statistical behavior. By conducting experiments on both synthetic and real-world data, we show that the proposed framework can capture the characteristics, such as trends and inter-area oscillation, while reducing the data storage requirements

Big Data↗

Quantifying the impact of microgrid location and behavior on transmission network congestion

This work presents a preliminary analysis considering impact of a grid-connected microgrid on network transmission of the power system. The locational marginal prices of the power system are used to strategically place the microgrid to avoid congestion problems. In addition, a Monte Carlo simulation approach is implemented to confirm that network congestion can be attenuated if appropriate price-based signals are set to define the import and export dynamic between the two systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Uncertainty Quantification for Dissimilar Material Joints Under Corrosion Environment

Abstract Self-Piercing Riveting (SPR) is one of the most commonly used methods for joining dissimilar materials in the automotive industry. These joints are popular due to their adaptability, high performance and short cycle time. However, since these joints involve two dissimilar materials, they are susceptible to galvanic corrosion in the presence of an electrolyte which is driven by the difference in the equilibrium potential of the metals. This can affect the safety and resilience of these joints. In this paper, we focus on galvanic corrosion in Al-Fe SPR joints. A Machine learning (ML) based surrogate model, which is based off of FE simulations, for statistical corrosion analysis is developed. This model enables the resilience and reliability analysis of SPR joints under corrosion environment. In this study, first a physics-based finite element (FE) corrosion model has been developed to simulate the galvanic corrosion between a Fe cathode and an Al anode of a SPR joint. This model takes into account the effect of the crystal microstructure of the Al anode and the precipitation of the corrosion product. Several geometric and environmental factors including crevice gap, roughness of anode, conductivity, pH and the temperature of the electrolyte that effect corrosion are investigated. A thorough Uncertainty Quantification (UQ) analysis is conducted for the overall corrosion behavior of the Fe-Al SPR joints using a novelistic Probabilistic Confidence-Based Adaptive Sampling (PCAS) technique. PCAS is used to train the surrogate model by identifying the critical sampling points and thus reducing the overall computational costs. It is found that the electrolyte temperature has the largest effects on the material loss and needs to be managed closely for better corrosion control. By understanding the corrosion performance and resultant uncertainty impact on SPR joints, the reliability and resilience of these joints can be improved.

36 MATERIALS SCIENCE↗

Emissions and Flame Structure Assessment of Aeroengine Micromixing Injectors for Lean Direct Injection of Hydrogen and Hydrogen/Natural Gas Blends

Abstract The present study focuses on whether adapting low emissions liquid fuel injection concepts can be applied to gaseous mixtures. The goal is to develop an injector with specific geometric characteristics that will achieve the lowest emissions. This is conducted by evaluating emissions and flame diagnostics on a set of test hardware that has been developed for combustion of pure hydrogen and hydrogen/methane mixtures. The current test hardware adapts lean direct injection concepts from aeroengine injectors to a ground-based engine based on target flows associated with a Solar Turbines Industrial Engine gas turbine. A statistical test plan was developed to assess these geometric characteristics using a three level Box Behnken design. The test plan investigates the effect of injector flow splits, air swirl, fuel swirl, pressure drop, preheat temperature, fuel composition, and the adiabatic flame temperature on the flame structure and emissions performance. A total of 16 injectors were considered for a total of 688 test points for emission and imaging data. Emissions data were reported on a mass basis in ng/J and chemical reactor network analysis were conducted to further interpret emissions behavior. Images were also captured to analyze the flame structure features of interest including reaction volume, flame length, flame spread, and flame width. With these results, a predictive model for emissions was made to conclude the most optimal injector configuration is to have the highest level of air split (more volume of air through the injector plate versus the injector) and air swirl angle for both methane and hydrogen gas mixtures. The predictive emissions level for all of these cases were below 10 ng/J.

08 HYDROGEN↗

Combining Agent Based Modeling and System Dynamics to Investigate the Circularity of Plastics

The United States currently produces about 1 million metric ton of ocean plastic pollution annually. One proposed solution to combat plastic waste is a circular economy (CE), which aims to transition from today's take-make-waste linear pattern of production and consumption to a system where the value of resources is maximized over time. Two key methods in industrial ecology are useful in assessing the viability of CE: (1) System Dynamics (SD) and (2) Agent Based Modeling (ABM). In prior work, the plastic life cycle was modeled with SD and ABM. The two models calculate recycling rates and costs in different ways, making it difficult to pinpoint necessary next steps. We integrate the ABM and SD models - linking the emergent patterns from micro-level human decisions to system level processes - which allows a more comprehensive understanding of feedbacks, costs, and environmental impacts. The integrated model is more accurate, and can be used to visualize recycling rates and human health and environmental impacts over time. The difference between the integrated and original SD model prompts a Sobol sensitivity analysis, which is used to understand which behavioral factors most affect plastic recycling patterns. We find that the habitual component is typically the most influential in promoting positive recycling behavior. Additionally, we utilize the combined model to understand and visualize how various behavioral intervention scenarios, like improved access to recycling programs and cart tagging, influence recycling patterns; these results can guide future policy-making.

agent-based modeling↗

WE-E-BRE-02: BEST IN PHYSICS (THERAPY) - Stereotactic Radiotherapy for Renal Sympathetic Ablation for the Treatment of Refractory Hypertension

Purpose: To determine the safety and efficacy of stereotactic radiotherapy as a novel treatment for patients with refractory hypertension in a swine model. Uncontrolled hypertension is a significant contributor to morbidity and mortality, substantially increasing the risk of ischemic stroke, ischemic heart disease, and kidney failure. Methods: High-resolution computed tomography (CT) images of anesthetized pigs were acquired and treatment plans for each renal artery and nerve were developed using our clinically implemented treatment planning system. Stereotactic radiotherapy, 40Gy in single fraction was delivered bilaterally to the renal nerves using a state-of-the-art medical linear accelerator under image guidance utilizing dynamic conformal arcs. Dose to nearby critical organs was evaluated by dosevolume histogram analysis and correlated to toxicity data obtained through follow up pathology analysis. The animals were observed for six months with serial measurements of blood pressure, urine analysis, serum laboratories, and overall clinical and behavioral status. Results: All animals survived to the follow-up point without evidence of renal dysfunction (stable serum creatinine), skin changes, or behavioral changes that might suggest animal discomfort. Plasma norepinephrine levels (ng/ml) were followed monthly for 6 months. The average reduction observed was 63%, with the median reduction at 73.5%. Microscopic evaluation 4–6 weeks after treatment showed evidence of damage to the nerves around treated renal arteries. Considerable attenuation in pan neurofilament expression by immunohistochemistry was observed with some vacuolar changes indicative of injury. There was no histological or immunohistochemical evidence of damage to nearby spinal cord or spinal nerve root structures. Conclusion: Our preclinical studies have shown stereotactic radiotherapy to the renal sympathetic plexus to be safe and effective in reducing blood pressure, thus this approach holds great promise as a novel treatment modality for patients with refractory hypertension. This study was funded by the Stanford University Cardiovascular Institute. B. Loo and P. Maxim have received funding from RaySearch Laboratories.

60 APPLIED LIFE SCIENCES↗

On the critical behavior of (2 + 1)-dimensional QED

It is shown the analysis [1] for QED in (2 + 1) dimensions with N four-component fermions in the leading and next-to-leading orders of the 1/N expansion. As it was demonstrated in [1], the range of the admissible values N, where the dynamical fermion mass exists, decreases strongly with the increasing of the gauge charge. So, in Landau gauge the dynamical chiral symmetry breaking appears for N < 3.78, that is very close to the results of the leading order and in Feynman gauge dynamical mass is completely absent.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scientific User Behavior and Data-Sharing Trends in a Petascale File System

The Oak Ridge Leadership Computing Facility (OLCF) runs the No. 4 supercomputer in the world, supported by a petascale file system, to facilitate scientific discovery. In this paper, using the daily file system metadata snapshots collected over 500 days, we have studied the behavioral trends of 1, 362 active users and 380 projects across 35 science domains. In particular, we have analyzed both individual and collective behavior of users and projects, highlighting needs from individual communities and the overall requirements to operate the file system. We have analyzed the metadata across three dimensions, namely (i) the projects' file generation and usage trends, using quantitative file system-centric metrics, (ii) scientific user behavior on the file system, and (iii) the data sharing trends of users and projects. To the best of our knowledge, our work is the first of its kind to provide comprehensive insights on user behavior from multiple science domains through metadata analysis of a large-scale shared file system. We envision that this OLCF case study will provide valuable insights for the design, operation, and management of storage systems at scale, and also encourage other HPC centers to undertake similar such efforts.

Lim, Seung-Hwan↗

Discrete event modeling and massively parallel execution of epidemic outbreak phenomena

In complex phenomena such as epidemiological outbreaks, the intensity of inherent feedback effects and the significant role of transients in the dynamics make simulation the only effective method for proactive, reactive or post facto analysis. The spatial scale, runtime speed, and behavioral detail needed in detailed simulations of epidemic outbreaks cannot be supported by sequential or small-scale parallel execution, making it necessary to use large-scale parallel processing. Here, an optimistic parallel execution of a new discrete event formulation of a reaction–diffusion simulation model of epidemic propagation is presented to facilitate a dramatic increase in the fidelity and speed by which epidemiological simulations can be performed. Rollback support needed during optimistic parallel execution is achieved by combining reverse computation with a small amount of incremental state saving. Parallel speedup of over 5,500 and other runtime performance metrics of the system are observed with weak-scaling execution on a small (8,192-core) Blue Gene/P system, while scalability with a weak-scaling speedup of over 10,000 is demonstrated on 65,536 cores of a large Cray XT5 system. Scenarios representing large population sizes, with mobility and detailed state evolution modeled at the level of each individual, exceeding several hundreds of millions of individuals in the largest cases, are successfully exercised to verify model scalability.

Computer Science↗